Premier to Audition Problem With Multiple Channel Audio Clip

Hi Guys, I am trying send clips into audition to remove noise. The clips have 8 channels of audio but in audition only one shows up, and it seems to randomly choose one. The audio channels are all on one file so I don't understand why audition doesn't recognize this. Premier for sure sees all of them. So when I remove the noise, it only works for one channel.
How can I solve this? Merging all the channels into one clip and then sending it?

Hummm, you got me. I take my multitrack, open the individual sound files, do my effects and save as .wav
then I import the .wav back into Premiere
depends, some times I do the mix down into one file, save and import
I quit doing the render and replace or whatever it was called in CS6

Similar Messages

Encore CS5 has problems with 5.1 audio and 720p 59.94 fps video

I keep receiving error messages when i import mpeg2 720p 59.94 fps video with dolby 5.1 audio. It says "does not support video with multiple channel audio" or something to that effect. I have had no problems importing mpeg 2 1080i 29.94 fps video w/ 5.1 audio into encore.
Is there any solution to this? I have tried importing as a asset and timeline to no avail. I had to convert to 2 channel stereo for it to work.
thanks.

What would be the steps to do this and what software or freeware would you suggest. I have never demuxed before so please forgive my ignorance.
thanks.

Audition problems with ASI5211 analog pair & AES stereo in at same time ...

That is, the Audio Science ASI5211 card is advertised as essentially a 4 mono channel input card, 2 of which are analog and 2 are digital. However, I haven't been able to get Audition (CS5.5 or CS6) to recognize this capability. The ASIO/MME/WDM driver sets supplied by Audio Science (so far, versions 4.10.7 through 4.10.20) and its associated desktop driver control panel seem to show this ability as 2 separate stereo audio streams that can be set to pass either of the physical stereo input sources (Analog & AES). I select one stream as analog and the other as AES, but I can't seem to map these streams/inputs discretely inside Audition in the "Multitrack" view to 4 different channels.
If I use the ASIO driver class in Audition, I'm only shown a single "Default Input" stream (# 1) and can select among either the left or right physical input to map to the left or right stereo Audition channel. This appears to be the limit of my choices in the "Multitrack" input select view as well.
If I use the MME (WDM) driver class, I can select between the 2 streams (#1 and #2) as "Default Input" but again, whichever "stream" is selected, that's the only choice I get in the "Multitrack" input select view ...
I also have another instance of Audition that is running on a pair of ASI5644 cards (4 stereo record streams per card) and the ASIO driver class, that I don't seem to have this kind of problem with.
The Audio Science drivers are a "monlithic" kinda deal in that the one package is intended for most (if not all) of their product.
Any ideas?
Dell Optiplex 780
WIN7 64bit Enterprise
Audio Science ASI5211
I hope this is at least somewhat clear.
Thanks in advance for your time and attention.
-Tim

tgmartin wrote:
Steve,
Thanks for the response. I was able to get an answer about this from Audio Science and it appears that, like a number of things, this capability of deriving 4 discrete "mono" channels (2 Analog + 2 AES) from the ASI5211 card *WAS* possible in Audition v3 using Windows drivers, but it was amputated from subsequent versions of Audition.
What I was told was that the absence of this ability, using the current ASIO driver, is somehow due to the hardware architecture of the card. Not much more was revealed.
Nothing at all was removed from Audition's ability to pick up and send correctly formatted ASIO streams - otherwise just about every other user would have screamed from the rooftops, and it would have easily been picked up in beta testing.
Reading between the lines, I'd say that they were being 'economical' with the truth here. What it amounts to is that they've screwed up their ASIO driver - period.

Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

Hey Volks,
when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
im very thankful for any idea...

Hi Dast Media,
Have you resolve the multi channel export?
I have the same problem...(the export it's ok but i hear only the first two tracks)
i need to export a MXF file with 8 tracks, 6 stereo and 2 mono.
Thank you for help!

Chapter Problem with Multiple Timeline Assets

Using Premiere Pro 2.0 and DV assets exported from Premiere.
Normally I just create a single export out of Premiere and all works well. This time I decided to try a different workflow, taking advantage of Encore's ability to add multiple assets to the same timeline. This way, I figured, if any changes are needed, only one part will have to be reexported and retranscoded, instead of the whole thing.
So the first asset places in the timeline OK. The second asset generates a warning message, asking me if I want to "replace existing chapters with source marker in the asset".
Now first of all, there are no existing chapters in the section of timeline where the new asset is being added, so I don't know why it's asking if I want to replace them. But that's a minor annoyance. The real problem is that all the chapter markers in the second asset, whether I click Yes or Cancel in response to the warning, end up squished towards the beginning of the second asset. The first chapter marker is correct, and all chapter markers thereafter are redistributed 12 frames apart from there. I only noticed this when I expanded the timeline view.
I thought maybe I had exported from Premiere incorrectly, but if I remove the first asset and place the second asset in the timeline first, the chapters appear where they should. It seems that any asset after the first exhibits this squished marker syndrome, and I don't have a clue why, or how to fix it.
Anyone have any ideas here?

OK, I just tried replacing the middle timeline clip here. Logistically, it works.
Here's what I did.
1. New project. Add 3 pre-transcoded elementary mpeg and ac3 streams to the timeline.
2. Check project.
3. Fix the reported error about gaps between clips. Unfortunately, I had to move the 3rd clip 12 frames away from the 2nd clip. This will introduce a 12-frame gap between clips. I did not try to build with the error uncorrected. NB: There was no gap error concerning the boundary between clips 1 and 2, so I expect the problem is clip specific.
4. Build a disc image. All of the audio was ac3, and with the different audio clip lengths (all less than 1/2 second difference), Encore re-transcoded the audio, and only the audio. My suggestion here is to use .wav files only.
5. Use File>Replace Asset to replace the middle clip audio and video streams with new, shorter ones.
6. Trim out the danger stripes in the timeline and butt the video and audio of the 3rd clip perfectly up against the end of the middle clip.
7. Check project. No gap error this time.
8. Build disc image.
I mounted each image in turn and played them in WinDVD. They played as expected. I cannot speak to how truly seamless the playback is because all of the clips I have for testing fade to black at the end. But WinDVD did not hesitate when going from clip to clip and there were no freeze frames that I could see.
So upgrading to CS3 will let you do what you want. It may be a perfect solution, and it may not, but it is certain to be better than what you get from En 1.5 going from timeline to timeline.

Always asynchronous audio if I export an MXFop1a file with 8 channel audio from Premiere 2014.1 for delivery to XDCam HD U1 Sony.

I try now for hours to export an MXF op1a with 8 channel audio from Premiere CC2014.1 and with AME 2014.1 to copy the file on my XDCam drive u1 to a disc.
The file is always asynchronous after 20 or 30 minutes. The project is synchronous and also other codecs are synchronous if I export them. So I think it's a bug...
I use the newest Sony XDCam drivers. Also parts with no audio can't be render with intelligent render. If I use this option, Premiere or AME crashes...
I work on a mac system with 10.8.5 OSX.
Does anybody have the same problems or any ideas to solve my problem...
Best regards,
Florian

The following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

Problem with multiple Toplink/JPA apps in same server

Anyone have experence of running serveral Toplink/ EJB-3 Web apps in the same server (OC4J, alas)?
We seem to get a problem with the second app failing to initialise toplink, with an entity not found message. Each app runs OK on it's own.

Yes, they access the same datasource and most of the tables overlap.
We're thinking it might help to have common entity classes and put them in a shared library, but I don't know if this is relevant (setting up shared libraries complicates testing and tends to snowball, I reckon we need about 15 jars all told).
I''ve had some funnies on OC4J before which I think may be to do with it's use of ClassLoaders, for example I initially put persistence.xml in the libary jar with the data model, but for some reason I get the entity not found error that way. It only seems to work if it's in the classes folder.
For the moment we're getting arround the problem with multiple OC4J instances in the server.

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Can quicktime play an video track with multiple alternate audio tracks?

Hi,
If I have a video track with multiple alternate audio tracks (say different languages), can a user select the audio track of his choice and play in Quick time?
Thanks,
Apurva

Does quick time/ safari have this capability?
QT (i.e., the QT structure embeded in current Mac OS/device IOS versions) has the ability to switch between alternative audio tracks assuming the file is properly encoded and the compression format is supported. QT 7, QT X, iTunes, and similar app player GUIs can switch between such tracks during playback but the QT plug-in cannot. In a similar manner, devices like TV can switch between such tracks but an iPhone cannot just as an iPhone can select "Chapters" but the QT browser plug-in cannot but an iPhone file programmed with both chapters and alternate audio tracks can be played back through a TV device and access both chapters and alternative audio tracks.
What I want to use is one video track with alternate audio tracks in a set level manifest and play this using HTTP Live streaming. I'm using the manifest mentioned here :
http://tools.ietf.org/html/draft-pantos-http-live-streaming-07#section-8.7
Since I do not use playlists, I am not familiar with the approach in your example. If I want alternate audio and/or video tracks, I create standalone video files with these features built in. Nor do I use RTSP if that is what you mean by "live streaming" of content. If I want to "stream" the content, I use "Fast Start" files programmed to open in the QT player app which supports these features or create reference or QT Media Link files that do the same thing.
As you mentioned, Safari on my iPhone is playing the default/first alternate audio track mentioned but not giving an option to switch tracks.
Neither Safari nor the Video app GUIs on your iPhone have a built in switching option. The only way to switch to alternate audio tracks is to do so with QT 7 Pro or possibly iTunes before loading or streaming the video file. (Am still speaking about a standalone file here and not a programmed playlist/RTSP switch.)
However Quick time on my Mac machine only plays the audio with the the video stream and not the alternate audio track.
The QT player app GUI only switches between tracks that are stored as part of the standalone file. Basically, QT files may contain up to 99 individual data tracks. In alternative audio videos, multiple audio tracks are added to the file by an editor like QT 7 Pro but only one track is designated as "active." All other tracks are designated as "inactive." The QT player GUI allows the viewer to select which audio track he or she wants to hear and then turns off the current audio track and turns on the selected audio track. Otherwise all active tracks would play simultaneously.
Is there a way to switch tracks on my iPhone on Safari?
As previously noted, the default track can be manually changed by QT 7 Pro or, I believe, iTunes (used to have this capability) before actually loading or streaming content.
Does quicktime have this capability?
As far as I know, only with regard to stand alone files programmed with multiple alternate tracks. I am not a HTML, HTML5, or Java programmer so I assume there may be web alternatives here but they would be beyond the scope of my expertise.
Do you know any free player that can do this?
Again, I don't use either playlists or RTSP so I've never had a need to look for/use alternative players that might meet your needs. I simply find it easier to build files that work correctly in current player app/device GUIs already having these capabilities.
Or the very last option, can I build a player to do this? If yes can you suggest where/how I start?
Once again, I assume this might be possible but not part of my experience since, for my part, easier work flows are available.

My sound is like echo and i can't solve the problem with realtek hd audio manager

HP G72 notebook
Windows 7 64 bit
Sound is like echo and can't solve problem with Realtek HD audio manager

It's a Qosmio X300-16M (windows 7 64bit)
I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
And I just want to know if it's a curent problem or not... and if someone can fix it

Problem with multiple forms and subview

I have a problem when using NetBean Web Pack (JDK6, Net Beans 5.5, JSF 1.2).
1) I created a JSF page (hello.jsp) and a page fragment (header.jspf) inside Web Pack, and let the JSF page (hello.jsp) includes the page fragment.
2) The include instruction is outside of the "form" element id=main_form() of the first JSF page.
3) Inside the page fragment (header.jspf), I put a form (id=header_form) with some input fields inside the "subview" element.
4) When running the web application, the form and its children (id=header_form) inside the subview are not rendered.
It seems to be a problem with multiple forms on a page and the subview.
Do I use these JSF components incorrectly? Any advice?
Thanks

The forms are not nested.
hello.jsp
<webuijsf:body ...>

<div style="margin: 0px 0px 10px 0px; left: 0px; top: 0px">
<jsp:directive.include file="Header.jspf"/>
</div>

<webuijsf:form ...>
From above fragment, you can see the header.jspf is outside of the form element.

LOV Problem with multiple values

HI All,
I have a problem with LOV .When ever i click LOV after search button all values are displaying fine.
But when i get so many values i want to select only one vlaue that is not cmng to the main page ....Cursor is in running state always after that time out error is coming in my application .
This problem is coming with with only single value selection in lOV only problem with Multiple values retrival that time only...
(Iam using 11.1.1.3 Jdeveloper.)
Thanx in advance...

duplicate of {thread:id=2286814}

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

Unlinking multiple Video/audio clips

Coming from FCP I'm used to doing certain things as part of the workflow.   One of these is being able to link / unlink multiple video/audio clips at the same time to that I can selectively delete or disable the audio if I'm running a second audio recorder or perhaps mixing a backing track.
In PPro it seems like as soon as I select more than one clip the 'Unlink' option is grayed.    How can I select (say) 10 clips, unlink the audio from the video so that I can delete or disable it.   The reason for disable is that I may want the ambient sounds later on in the mix, but if I disable this audio without unlinking I also disable the video.
I don't want to keep moving stuff on to more and more audio tracks and then have to mute the track, that's time consuming and a pain.   All I want to do it unlink multiple clips.
This can't be that hard can it ?

You don't need to Unlink in order to Delete. Just hold down the Alt key while selecting the audio portion of the clips.
You can 'disable' the audio by turning off the entire track, which is very easy to undo if you ever want the audio back.
It's a slight shift in work flow, but the end result is the same.

Premier to Audition Problem With Multiple Channel Audio Clip

Similar Messages

Maybe you are looking for