Premiere 1.5 to CS4 - timeline does not display previous setup PLEASE

New to the forum:  (Had to upgrade SW; Updated to VISTA.  Premiere 1.5 would not reload.)
Opening older Premiere 1.5 files into Premiere CS4.
After relocating all the files, the timeline does not show the videos, audios, cuts and oranization that was previously done in Premiere 1.5.
Nothing is in the timeline.
What can be done?   PLEASE Help
Thanks

Double click on the imported sequence in the Project Window.
PS: welcome to the forums.

Similar Messages

  • CS4 GUI does not display correctly

    I'm using the trial version of Dreamweaver CS4 on a Thinkpad
    T60 with XP Pro SP3. My monitor is 1280 x 1024 and the fonts size
    is set to Large (which may be the source of this problem.)
    When I am using Dreamweaver, the window at the bottom of the
    screen, the one with a tab labeled Properties, does no fully
    display. The second line of data entry boxes, the ones labeled ID
    and Link are partially cut off. There does not seem to be any way
    to increase the size of that window and I also don't know if there
    are more than 2 lines.
    Is this a font size issue? is there any fix, other than using
    normal size fonts?

    Adobe applications unfortunately do not adhere to OS UI
    standards.
    Al Sparber - PVII
    http://www.projectseven.com
    The Finest Dreamweaver Menus | Galleries | Widgets
    http://www.projectseven.com/go/pop
    The Ultimate DW Menu System
    "vicroberts" <[email protected]> wrote in
    message
    news:gjoe9i$7vc$[email protected]..
    >I did not mention in my original post that I'm using an
    external monitor
    >with
    > the Thinkpad.
    >
    > I can confirm now that the problem I discuss in my
    original post
    > disappears if
    > I switch to Normal fonts instead of Large. It would be
    nice if there were
    > some
    > way to display this window complete when using Large
    fonts. I have not
    > seen
    > any programs that have problems with large fonts in
    quite some time. I'm
    > surprised that a program such as Dreamweaver would not
    be coded to adjust
    > correctly for large fonts.
    >

  • NCS Prime 1.4 does not display previous AP WLAN-VLAN mappings

    Hi,
    Just wondering if others have experienced this issue. I upgrade our Prime NCS from 1.3 to 1.4 last night. Upgrade appeared successful but today when looking through the web interface for testing I noticed that the  'Access Point Details' (Configure > Access Points > Access point details" no longer displays the flex connect vlan mappings which previously were shown in 1.3.
    When clicking on the WLAN-VLAN Mappings tab nothing appears there too? I tried to apply the wireless configuration template again but received an error.
    Has anyone had this issue? On the WLC, these configurations are still intact with the correct vlan-mappings so it only appears to be NCS that is having the issues.
    Only thing I can see from the release notes regarding NCS 1.4 Flexconnect VLAN mappings is CSCug17718. But this caveat is under the resolved section.
    Cheers,
    Wil

    Cheers thanks for the reply.
    I figured out what the problem was. Appears that Audit status has mismatches but once another audit is done it appears to display vlan mappings with at the access point detail page.
    Now... to figure out how to perfect bulk audits..
    Anyways thanks for your advice.

  • Brpwser does not display router setup menu

    I have my laptop connected by cable, and have tried to access the router's setup menu with Internet Explorer 6 and firefox.  I enter the password admin and the browser displays a web page with the following text
    name="router_name" size="20" value='WRT54G'
    value="mixed" selected>
    I want to change the wireless channel for my desktop which is connected with a wireless linksys pci card.  I even disabled the laptop's wireless connection and the windows firewall.
    Has anyone encountered this problem?  Any help will be greatly appreciated.

    Please make sure that the computer that you're using to access the router's setup page has no firewall (I mean to say firewall should be turned off, anti-virus, zonealarm and other security softwares). Make sure that you've cleared the cache as well (open an Internet explorer browser>on the top part of the page select tools>internet options>hit delete cookies, files and clear history)... Try another computer too. If ever none works, it might be necessary to upgrade the router's firmware.

  • Bkg image does not display

    A background image shows up in my "container" div in design view (DW CS4), but does not display in preview or Live View.
    What might be preventing the image from displaying?
    Note: bkg colors do display.

    How To get Help Quickly
    http://forums.adobe.com/thread/470404
    Upload the  test page to your web server and post a URL for us to see.  It could be bad image type, a bad path to the file itself or a half-dozen other things.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?

    My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?

    You would need Camera Raw 7.3 or later to open those files. Adobe is not going to update CS4. You can either get a newer version of Photoshop that comes with a current version of Camera Raw, or you can use the DNG converter to save your files down to the ACR version that works with CS4.

  • Dreamweaver CS4 Live View - background-image does not display

    I'm teaching a basic Dreamweaver CS4 class, and one of my students happened upon a unique problem. 
    Although the students were not required to use LiveView for their assignment, the student noticed that when he clicked the LiveView button to look at his assignment, that the background-image property that he set on the #header DIV does not display.
    I tried duplicating his problem by building a similar site to his, using the exact same Dreamweaver Starter Page he used, but I'm not able to reproduce it the problem. If I define a new site using the files the student sent me, the problem comes back.
    I'm completely stumped. What could possibly be causing the background-image CSS property to stop rendering in Live View?
    Thanks for any help at all!

    Hi
    Check your students css code for invalid or missing mark-up, or linking to the background image. Another possible problem, (occurs on some sites but not all) is to check if the url is enclosed in quotes as these are occasionally required but not always, also check for spaces in file names
    e.g. - background-image: url(../images/yourimage.jpg); should work but occasional requires quotes as in - background-image: url("../images/yourimage.jpg");
    PZ
    www.pziecina.com

  • Video does not display when sending from Final Cut Pro to Motion

    Suddenly, when sending an audio & video sequence to Motion, a new Motion file is created, and all my layers come in properly, but the video does not display.
    The audio plays fine, and Motion clearly know that there are video tracks there, but it does not display them.
    Additionally, when rendering the Motion file back in FCP, it turns in to black video.
    I have previous sequences within the same project that were sent just fine, and are editable properly, but any new ones I try to create just come out black.
    Help, please?

    Do you have Motion mistakenly set to render out with an Alpha channel?
    Double click your Motion clip in the Timeline. Go to Modify > Composite Mode in the menu bar and set the Alpha to "None/Ignore".

  • InDesign CS5.5 does not display fonts correctly

    InDesign CS5.5 does not display Futura fonts correctly. I have removed all versions of Futura from FontBook on my Mac (running Mac OSX 10.7.4) but CS5.5 - Indesign, Illustrator & photoshop - still displays Futura as being open but only InDesign does not display the font correctly. The font displays correctly when I open InDesign CS4 and all other versions of Illustrator and Photoshop.  I really need to use this font. What's going on with InDesign?

    In your first screen shot , there are 2 futura font ,one is Adobe Type 1 font and the second one is True Type, you might have installed both the type of the font on your computer sometime. Now you have removed all the futura font and it is still showing in the Indesign , also the same thing happened with the Minion Pro , seems to me the font cache is not updating.
    First remove the Adobe Font cache's file:-
             At the Finder, choose File > Find.  
             Type AdobeFnt.lst, select the system drive, and then press Return.  
             Delete all AdobeFnt.lst files found (for example, AdobeFnt10.lst).
    then clear system font cache  :-  
    Launch Terminal (from /Applications/Utilities)
    Enter the following command at the prompt and press Return: sudo atsutil databases -remove
    Restart your computer immediately
    and check

  • Adobe Bridge CS3 - does not display thumbnails for Canon 40D or 50D RAW files

    I wanted to use Bridge to view my Canon EOS 50D RAW files and it does not display the thumbnails, just icons. I checked my 40D cr2 files and saw same thing.
    I have purged the cache and rest the cache preferences and it has not helped. I would like to be abl eto view the thumbnails of the RAW files via Bridge if possible. Jpg files and Tif files can be viewed without any issues.
    Am using Bridge version 2.1.1.9 and Pshop CS3 10.0.1

    I have the exact same problem. I can view my RAW file thumbnails (which are .ARW files from my Sony A200 camera) in the Finder and in other applications, such as Preview, but not in Adobe Bridge CS3. I know that I did try purging the cache at one point to see if that would fix it, but then I didn't know what to do after that. Before I purged the cache, I was able to view RAW thumbnails in Bridge, but then they would not increase in size when I tried using the slider (at the bottom right of the Bridge window)

  • DataGrid does not display XML data

    Hello, and thanks for reading this...
    I am having a problem displaying XMLList data in a DataGrid.
    The data is coming from a Tree control, which is receiving it
    from a database using HTTPService.
    The data is a list of "Job Orders" from a MySQL database,
    being formatted as XML by a PHP page.
    If it would be helpful to see the actual XML, a sample is
    here:
    http://www.anaheimwib.com/_login/get_all_orders_test2.php
    All is going well until I get to the DataGrid, which doesn't
    display the data, although I know it is there as I can see it in
    debug mode. I've checked the dataField property of the appropriate
    DataGrid column, and it appears correct.
    Following is a summary of the relevant code.
    ...An HTTPService named "get_all_job_orders" retrieves
    records from a MySQL database via PHP...
    ...Results are formatted as E4X:
    HTTPService resultFormat="e4x"
    ...An XMLListCollection's source property is set to the
    returned E4X XML results:
    ...The "order" node is what is being used as the top-level of
    the XML data.
    <mx:XMLListCollection id="jobOrdersReviewXMLList"
    source="{get_all_job_orders.lastResult.order}"/>
    ...The "jobOrdersReviewXMLList" collection is assigned to be
    the dataProvider property of a Tree list, using the @name syntax to
    display the nodes correctly, and a change event function is defined
    to add the records to a DataGrid on a separate Component for
    viewing the XML records:
    <mx:Tree dataProvider="{jobOrdersReviewXMLList}"
    labelField="@name"
    change="jobPosForm.addTreePositionsToDG(event)"/>
    ...Here is the relevant "jobPosForm" code (the Job Positions
    Form, a separate Component based on a Form) :
    ...A variable is declared:
    [Bindable]
    public var positionsArray:XMLList;
    ...The variable is initialized on CreationComplete event of
    the Form:
    positionsArray = new XMLList;
    ...The Tree's change event function is defined within the
    "jobPosForm" Component.
    ...Clicking on a Tree node fires the Change event.
    ...This passes an event object to the function.
    ...This event object contains the XML from the selected Tree
    node.
    ...The Tree node's XML data is passed into the positionsArray
    XMLList.
    ...This array is the dataProvider for the DataGrid, as you
    will see in the following block.
    public function addTreePositionsToDG(event:Event):void{
    this.positionsArray = selectedNode.positions.position;
    ...A datagrid has its dataProvider is bound to
    positionsArray.
    ...(I will only show one column defined here for brevity.)
    ...This column has its dataField property set to "POS_TITLE",
    a field in the returned XML record:
    <mx:DataGrid width="100%" variableRowHeight="true"
    height="75%" id="dgPositions"
    dataProvider="{positionsArray}" editable="false">
    <mx:columns>
    <mx:DataGridColumn width="25" headerText="Position Title"
    dataField="POS_TITLE"/>
    </mx:columns>
    </mx:DataGrid>
    In debug mode, I can examine the datagrid's dataProvider
    property, and see that the correct XML data from the Tree control
    is present. However, The datagrid does not display the data in any
    of its 6 columns.
    Does anyone have any advice?
    Thanks for your time.

    Hello again,
    I came up with a method of populating the DataGrid from the
    selected Item of a Tree Control which displays complex XML data and
    XML attributes. After the user clicks on a Tree branch, I call this
    function:
    public function addTreePositionsToDG(event:Event):void{
    //Retrieve all "position" nodes from tree.
    //Loop thru each Position.
    //Add Position data to the positionsArray Array Collection.
    //The DataGrid dataprovider is bound to this array, and will
    be updated.
    positionsArray = new ArrayCollection();
    var selectedNode:Object=event.target.selectedItem;//Contains
    entire branch.
    for each (var position:XML in
    selectedNode.positions.position){
    var posArray:Array = new Array();
    posArray.PK_POSITIONID = position.@PK_POSITIONID;
    posArray.FK_ORDERID = position.@FK_ORDERID;
    posArray.POS_TITLE = position.@POS_TITLE;
    posArray.NUM_YOUTH = position.@NUM_YOUTH;
    posArray.AGE_1617 = position.@AGE_1617;
    posArray.AGE_1821 = position.@AGE_1821;
    posArray.HOURS_WK = position.@HOURS_WK;
    posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
    posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
    posArray.JOB_DESCR = position.@JOB_DESCR;
    posArray.DES_SKILLS = position.@DES_SKILLS;
    positionsArray.addItem(posArray);
    So, I just had to manually go through the selected Tree node,
    copy each XML attribute into a simple Array, then ADD this Array to
    an ArrayCollection being used as the DataProvider for the DataGrid.
    It's not elegant, but it works and I don't have to use a Label
    Function, which was getting way too complicated. I still think that
    Flex should have an easier way of doing this. There probably is an
    easier way, but the Flex documentation doesn't provide an easy path
    to it.
    I want to thank you, Tracy, for the all the help. I checked
    out the examples you have at www.cflex.net and they are very
    helpful. I bookmarked the site and will be using it as a resource
    from now on.

  • Aperture 3 project does not display any images in one Project

    This is a strange situation.  The bullets below outline the situation:
    The project does not display any images
    When I place the pointer over the project it shows there are 500+ images
    I have located the RAW images stored in my aperture library
    I can pull up the images using a smart folder and searching for photos taken on the event day
    This is happening only to one of my projects that I know of (weird!!)
    I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
    I tried the following basics:
    Fixed permissions
    Rebuilt the database
    Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
    Found the images in my Aperture library
    I created another project and drug all of the images into that project
    Any idea how I can fix this?
    My fear is that if I delete the original project, the original master images will be deleted.

    The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
    RB
    One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

  • MENU item selection does not display drop down in ITS enabled transaction

    Hello,
    We are experiencing a strange behavior between two portal env.
    1. DEV.
    For example we have transaction MM01 display in the Portal via ITS (integrated). The end user can select the Menu Tab and the System Tab and the drop downs appear as expected.
    2. Prod
    Same  scenario as above. Only this time, end user is unable to select the button. The Menu and System Tab dont appear greyed out but selecting it does not display the drop down.
    Material, Edit GoTo Defaults are some of the links under the Menu tab for MM01.
    Very confusing. And this is the behavior in Prod for all transactions. Any ideas on why this is happening would be greatly appreciated.
    The architectural difference is that DEV has no Web Dispatcher versus Prod has the Web Dispatcher.
    We are on EP 7.0
    Many thanks.
    Regards,
    Sunil

    Thanks. Now, I realise this may cause dismay to some, but I have now solved the problem, and just wanted to share my experience with those even less savvy than myself. In Dreamweaver, the Spry css styles are arranged with little or no hint as to which style controls what. I found that there is a rule in the sub-menu styles that controls the little graphic arrows which indicate that there are dropdown subs under the tabs. I had removed these arrows to make way for my background images. However, the rules that control their positioning by percentage were still there, causing my images to display incorrectly. Of course, there was no way anyone could have spotted this and helped me as the fault was in the external spry css file, not the page code. So many thanks to vw2ureg for looking anyway. Regarding the page code, which you have flagged up, would you mind elaborating on what you see wrong here? I'm none the wiser. Many thanks again.

  • Product Revenue Bookings and Backlog Dashboard does not display any data

    Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
    They are able to see just the parameters.
    Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
    What can I check?
    Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
    Screenshot is at:
    https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
    Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
    Any ideas?

    hi
    We have faced the similar problem after the upgrade to 10G
    What we did was
    Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
    we were able to get the data once the clear and load is completed successfully
    Regards
    Ramesh Kumar S

  • REMOTE app on iPhone does not display Cover Art

    I use the Apple REMOTE App on my iPhone to control my iTunes music library on a Mac. The REMOTE App controls the iTunes playback properly. However, the Cover Art for each song does not display on the "song" screen - showing the song currently playing. Across my iPhone screen (where the Cover Art should appear) are the words containing album of the song). The name of the song and album correctly appear at the top of the screen.
    What is interesting is that when I hit the back arrow (left side top on song screen), all of the Cover Art appears in small thumbnails. The Cover Art also appears in other displays (for example, the currently-playing Album) using REMOTE on my iPhone. This means that the cover art is being transmitted to my iPhone - HOWEVER IT DOES NOT DISPLAY ON THE SONG SCREEN.
    Can anyone kindly help me resolve this - because I would really like the Cover Art to display properly on the song screen.  Thank you.  Dale

    Nezmo, This is really unbelievable.  I have suffered from the issue I described for SEVERAL YEARS.  Today, for some reason I decided to make this post on the Apple discussion board.  And, today the issue was fixed by Apple.  I just downloaded the update to the REMOTE app and the cover art now shows beautifully on my iPhone 6 plus.  Thanks.  Dale

Maybe you are looking for