Premiere 10 fails on YouTube Share/Upload

The YouTube share option has worked for me in the past, but now shows a fail message almost immediately. I found a solution elsewhere for this, but it refers to film categories.
In my case, the message comes up straight away before PE asks for any Youtube info.
Any help appreciated.
Thanks,
Bernie

There could be any number of reasons for this, and you can go nuts trying to figure it out.
I'd recommend you use this method to upload to YouTube until it resolves itself. Most people feel it gives better results anyway.
http://forums.adobe.com/thread/623549?tstart=0

Similar Messages

  • How do i upload a single clip for premiere elements 7 to youtube

    I have Premiere Elements 7 and have created a project/moive containing 10 clips. I want to upload the clips 'separately ' to Youtube. How do I do this.In other words i don't want to move the entrie movie to Youtube- it is far too big.  Thanks.

    Now, I am just guessing here, as I cannot access the Advanced dialog for YouTube, as I do not have a YouTube account, but I would assume that you will get to this choice (Export WorkArea Bar Only) from there. Here it is in the DV-AVI Share/Export Advanced dialog box:
    Hope that the YouTube Share is the same.
    Good luck,
    Hunt

  • How does YouTube Share decide where to upload videos?

    For some years I have uploaded most of my videos to YouTube direct from Share. Last week I registered a new account with Google and lo and behold when I just tried out a 15 sec test piece it uploaded direct to this new account. How can I default it back to my older YouTube where I have many subscribers, as I can detect no obvious link. (I am using PE9).
    Many thanks.

    Where your YouTube videos upload to depends on which account you're logged into in Premiere Elements, Moppett.
    If you're seeing these videos while logged into another account, it may just be that Google/YouTube just recognizes your name or your computer and they decided to show you all of your accounts at once. Google's software is kind of sneaky that way.

  • Premiere elements 10 to youtube problems

    I am trying to upload a video from premiere elements 10 to youtube through their "easy" "fastest" "process". After going through and clicking online, then youtube, I click authorize. I put my info in and it logs me in. I then am prompted to accept that the app would like permission to have offline access, when I click accept it brings me to a blank web page. obviously I am stuck here and am frustrated. Any help would be GREATLY appreciated. (I am thinking adobe is NOT very user friendly right now)

    back
    When you decide to upload a video to YouTube to share with friends and family, there are at least two possibilities involving your Premiere Elements 10
    1. You import your source media into a new project whose project settings match the properties of your source.
    2.  Once you have them on the Timeline, you can
    a. Using Share/Computer/AVCHD and one of its appropriate presets, you can export that Timeline content to a file (.mp4 choice is good) saved to the computer hard drive. Then you upload that saved file to YouTube from the computer hard drive save location to YouTube at the YouTube web site, not from Share/Online/YouTube.
    b. Using Share/Online/YouTube and one of its appropriate presets, you can upload the Timeline content to YouTube from within the program. This upload is not save anywhere to your computer. If you ever needed a copy of it, you could get one at the YouTube web site.
    Now which one of those routes have you tried? Have any of them worked for you?
    ATR

  • Hello, I have a question. If I download a Easy youtube downloader to my mac computer, do I share content. For example, when I download a video from YouTube, share I it, or no? Thank you.

    Hello, I've got a question. Does Easy Youtube downloader share content? For example, when I download a some video from YouTube, share I it, or no? Thank You.

    You're 'sharing' or uploading to Youtube, not an Adobe server or service.
    "2.7 “Shared Material” means the User Material that you or other Users share through the Services."
    You are using Googles/Youtube's services to upload, not Adobe's.
    Nost Youtube videos can be viewed without Flash using their HTML5  option, or by using a Safari or other browser extension, like http://hoyois.github.io/safariextensions/clicktoplugin/

  • My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

    My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
    thanks

    for windows you should have an exe and a 7z file.  put both in the same directory and double click the exe.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • CIFS[17138]: WARNING: CODIR: Failed to add share "MDATA" to

    Can someone tell me how to get rid of the message
    Code:
    CIFS[17138]: WARNING: CODIR: Failed to add share "MDATA" to eDirectoy. Error: 0

    Originally Posted by susehoush
    cluster -> yes (3node sles10sp3+oes2sp3)
    There is a nss volume object and a pool object and their attributes seem to be ok.
    We also get the following 2 errors:
    Code:
    CIFS[17138]: ERROR: ENTRY: CIFSNDSGetCIFSServerInfo: isVirtualServer = FALSE, uServerVersion = %U, aServerVersion = e, expected = %U
    ERROR: CODIR: LockDirCacheEntry failed to open file for User
    Ok, This thread might be of interest (mainly the clarification in post #25) http://forums.novell.com/forums/nove...ols-howto.html
    And the related TID (only as a reference in this case, not meant to apply that added python script) : CIFS not enabled properly on cluster resource that was created before upgrading to OES2 SP2
    Curious if you are trying to add CIFS after having created the resources? But then still, it should not be an issue anymore (as in should have been fixed).
    -Willem

  • Premiere Pro fails to install

    Premiere Pro fails to install as a trial or as a coud app. Here is the error code that I receive.
    PLEASE HELP!!!!!!!
    Exit Code: 34  -------------------------------------- Summary --------------------------------------  - 1 fatal error(s), 0 error(s), 0 warning(s)    FATAL: Payload '{A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.2.5.0' information not found in Media_db.  ------------------------------------------------------------------------------------- 
    System Requirements

    Unfortunately Exit Code 34 does not provide much information.  I would recommend you begin investigating your difficulties by utilizing the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/ to review your installation logs.
    Alternately you can review your installation logs manually by following the steps listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

    With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

    Gary Krouse
    We will customize a very detailed reply, but
    (a) What are the properties of your source media?
    (b) What did you or the program set as the project preset to match the properties of the source media?
    (c) What specific requirements do you have for this H.264.mov export file?
    File size can be a compromise between bitrate, file size, and quality.
    Thanks.
    ATR

  • How to cancel a Share Upload?

    I wanted to cancel a Share Upload, soon after it started. Is
    there a "clean" way to do this? Other than breaking
    connection...

    Hello frailer,
    Thanks for your post. At this point, I do not see a way to
    cancel an upload that is in progress, however I will pass this good
    observation, and suggestion on to the team as a feature request.
    Thank you for helping us make Acrobat.com better and better!
    Cheers,
    Pete

  • Failed to start Share could not initiate desktop share

    we have calabrio QM recording as well as jabber running. we record their desktop with calabrio. however when we have a user that tries to initiate a desktop share with jabber it gives us the error "Failed to start Share could not initiate desktop share" when i stop the desktop monitoring and recording service from calabrio it works. i thought that there might be some port overlap but they have alot of ports that are open to chose form and i find that hard to believe.
    i have been told that if calabrio and jabber use the same remote assistance windows api they will never work in harmony. Does anyone know if jabber uses the remote assistance api to for screen sharing?

    This problem is not isolated to the Broadcom adapter. However, based on several inquiries, we list the following instructions based on other customers successfully working around this issue:
    Place the Broadcom driver files in the original image folder (the image folder created when risetup.exe was executed for the first time).
    Example: i:\RemoteInstall\Setup\English\Images\(Original Image)
    Place the Broadcom driver files in the i386 subfolder under the original image folder
    Example: i:\RemoteInstall\Setup\English\Images\(Original Image)\i386
    Place the Broadcom driver files for the network adapter in the RIPREP Image folder.
    Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)
    Place the Broadcom adapter drivers in the i386 subfolder where the RIPREP Image is located.
    Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)\i386
    The Microsoft Knowledge base articles listed below were used as a reference for the following instructions:
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;254078
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;246184
    Found this on -
    https://www.broadcom.com/support/ethernet_nic/faq_drivers.php
    I don't know if this will help, looks really old, about as old as the network card :)

  • Enhanced podcost upload fails on YouTube

    I recently moved from a computer with GarageBand 08 to 09. I make enhanced podcasts for my class and post them on YouTube. In the 08 version this worked perfectly, but with the new computer (OS 10.6 and GarageBand 09) the podcast file is created with no problem as an .m4a file, but when I upload it to YouTube the pictures get cropped and messed up. Has anyone had this problem? Any ideas?

    There could be any number of reasons for this, and you can go nuts trying to figure it out.
    I'd recommend you use this method to upload to YouTube until it resolves itself. Most people feel it gives better results anyway.
    http://forums.adobe.com/thread/623549?tstart=0

  • Premiere Elements 7 Crashing on Share DVD every time on Vista 32

    I am running Premiere Elements 7 on Vista Home Premium 32 bit. The machinse is up to specs, quad core, 3GB RAM, Ge Force 9500GT etc. I'm in the US using NTSC. Drive C; has 127GB free and E:, also internal, has 73GB free. Both get defragged and they get cleaned with CCleaner etc.
    I had not used PE7 in a while and I shot video of a birthday party at a go kart track on Canon HV-20. I imported the video, edited it, added quicktracks music and exported the result as DVD going to folder 4.7GB as per Appendix of Muvipix Guide. [note no crash when I did this] I then burned that TS_Video folder to a DVD but it didn't play on DVD player. So I came back to PE7 to try writing an actual DVD directly.
    Whenever I click Share > DVD now I get an immediate crash of the program. Windows provides this info in that error box:
    Problem signature:
       Problem Event Name:    APPCRASH
       Application Name:    Adobe Premiere Elements.exe
       Application Version:    7.0.0.0
       Application Timestamp:    48cee0db
       Fault Module Name:    StackHash_a34a
       Fault Module Version:    0.0.0.0
       Fault Module Timestamp:    00000000
       Exception Code:    c0000005
       Exception Offset:    00000000
       OS Version:    6.0.6002.2.2.0.768.3
       Locale ID:    1033
       Additional Information 1:    a34a
       Additional Information 2:    c9c5f4fd744690d388ab9d5b3eb051a7
       Additional Information 3:    cb2e
       Additional Information 4:    650bb5690556a17e911375b94d3e16f0
    Read our privacy statement:
       http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
      I had to go Task Managaer > Processes and end the APE7 process before I could launch the program again....but the I tried another project entirely, an older one that was shot on a Sony DV Cam and it caused the same crash.
    I cleaned the temp files and registry, restarted....same thing. So I went to this document:
    http://kb2.adobe.com/cps/404/kb404998.html#Before
    ...and started working through troubleshooting steps. I did this so far:
    1. Make sure that the system meets the minimum requirements for Adobe Premiere Elements 7
    check
    2. Install the latest version of Premiere Elements.
    checked, no updates available
    3. Install current Windows service packs and other updates.
    check, every single one is installed on this system. I run CS4 with PSCS4 Extended and Lightroom 2.5 all the time here.
    4. Re-create the Premiere Elements PluginCache.
    This I could not do. Holding Shift on starting APE7 had no effect. It just brings me to the Phosotshop Online signing screen on the elft with Open or Instant Movie on right etc.
    5. Re-create the Premiere Elements preferences folders.
    Could not find them at that location. Will come back to that as I have done complete reinstall of APE7 and deleted evrything I could find at that time.
    6. Disconnect IEEE 1394 devices.
    check, not a startup problem anyway
    7. Troubleshoot third-party plug-ins.
    Have not installed any
    8. Run Premiere Elements in a new user account.
    check, crashes same way
    9. Run Premiere Elements while no other applications run in the background.
    check, very limited set of apps running
    10. Update the video card driver.
    check, latest Nvidia GeFroce9500GT driver installed, also tried previous version, no effect
    11. Verify that other device drivers are compatible with Windows.
    check, devices were made for an work fine in Vista32
    12. Troubleshoot QuickTime.
    check (**PARTLY!**)...I have the latest QT Pro 7.6.4 and latest iTunes installed and working fine.
    HOWEVER,  I do have an issue in PSCS4 where I am not able to open QT Movies in Photoshop. The only response from Adobe's support ticket has been I should upgarde to QuickTime 7.1 or later...Duh, I have 7.6.4 and had said that in ticket. May be this is related?? May be it's a CODEC issue? I do have alot of CODECs on the machine that were set up by Zoomplayer's install center ioncluding latest DiVX etc.....but that should be OK I would think???
    13. Check for codec problems.
    See #12 above...do I disable every CODEC?? Not sure where to with that....?????
    I did read this..."..If you are not certain which codecs should remain on your system, contact Adobe Technical Support for additional help.
    To temporarily disable a video or audio codec, see "Temporarily disable a codec (Windows Vista)" (TechNote kb404892) for details....."
    14. Identify the file that causes the problem.
    Check, any do. Have a number of Elements projects, each of them causes the problem. Even creating a new project with two scenes in timeline and choosing Share > DVD will crash it now.
    15. Remove and Reinstall Premiere Elements.
    Check- ran uninstall, dleted all APE7 and APE4 folders I could find and ran CCleaner on temp files and regsitry.
    RE-downloaded APE7 from Adobe Store and after a reboot installed it. Rebooted. Boom same crash.
    16. Check for font problems.
    Uh, I have only added three fonts to what's in the system...any others were installed by Adobe CS4 Design Premium...didn't spend any time on this.
    17. Set the virtual memory paging file to the default size.
    Have not tried this.
    18. Optimize handling of temporary files by Windows
    check
    19. Repair and defragment hard disks.
    check, do that regularly. Most of my content lives on a 4TB Drobo anyway, but all the APE7 edits have been with fast internal drive that is not fragmented and has lots of room. All scratch disks are set to E: internal SATA 7200 drive...Vista is on C:
    20. Scan the system for viruses.
    Absolutely clean. Running Norton360 and have run exhaustive checks and scans with help from the Tweaks guys including ESET online scanner- Absolutely clean of malware, spyware, trojans, viruses, rootkits or even tracking cookies!
    21. Visit the Adobe User to User Forums.
    Tada! Here I am.
    22. Reinstall your capture card software.
    No cpature problems....it's built in FW13945 on my HP Media Center m8120N and has always worked fine.
    23. Contact Adobe Technical Support.
    Awww man.....really?
    Other stuff I have done and summary:
    ## I've read Steve say these kinds of problems are often Audio Driver problems. I have now installed latest Audio drivers from Realtek HD and Haupagge...latest are there and they work fine. Still crash.
    ## I've flashed both of my DVD writers drives, which are SATA, to latest Firmware and verified them.
    Final note, I CAN share a file and choose to upload it to YouTube which is what I did with the Birthday video.
    I have tried rendering the whole timeline before clicki9ng on Share > DVD still  immediate crash. I *WAS* able to go there when I first edited this rememebr and I saved the DVD to a 4.7GB folder.
    Thanks for any help!
    Phil
    pwscott   AT   gmail

    Pwscott wrote:
    10. Update the video card driver.
    check, latest Nvidia GeFroce9500GT driver installed, also tried previous version, no effect
    After installing recent nvidia drivers you should then uninstall the nvidia stereoscopic 3D driver from Control Panel> Uninstall a Program. This has a known conflict with APE.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Youtube video upload problem - blank section at bottom of video

    Hi All
    I'm trying to upload a video to youtube from a screen video capture (rocksmith) but everytime I upload the whole video has been vertically shifter by approx. 20% leaving a black blank area at the bottom.  Any idea on how I sort this?
    cheers
    Peter

    Peter
    Have you read Cubicleslave2's recent thread on experiences with the Bandicam footage?
    http://forums.adobe.com/thread/1204417?tstart=0
    What is your Premiere Elements 11 project preset? Are you or the program setting it?
    Assuming that before you upload to YouTube from within Premiere Elements 11 Publish+Share/Online/YouTube AND that your playback of your rendered Timeline looks OK, then I suspect here is the problem:
    a. You have 1280 x 720 (16:9) video and you are settling for YouTube Presets: = whatever is there, probably Flash Video for YouTube which is 640 x 480 4:3 @ 30 frames per second.
    So first thing to try is to upload using Presets = High Definition Video for YouTube which represents 1920 x 1080 16:9.
    If that does not work, we can explore another possibilities, including exporting the Timeline to a file saved to the computer hard drive and then uploading that at the YouTube web site, not from Premiere Elements 11 and its Publish+Share/Online/YouTube.
    We will be watching for your results.
    Thanks.
    ATR

  • Share presets for youtube share option

    Hi all, I´ve done a search over the net and haven´t found anything.
    Does anyone know which presets applys share when you choose youtube option?
    I´m working with some footage recorded with a contour 1080 hd cam which is 1280x720 60fps native, done a video file with this preset and uploaded to vimeo but I really don´t like very much the result, doesn´t seem to behave well fast screen changes and movement on old computers (even with hd off enabled on vimeo)

    Tommyvincent
    What did you set as the Premiere Elements 11 project preset? See what it says under Edit Menu/Project Settings/General and there for Editing Mode, Timebase, and Frame Size. I suspect it is 1080i.
    I am almost certain that you are operating from a 1920 x 1080 16:9 @ 29.97 interlaced frames per second project, but without confirmation on that not 100% sure.
    Assuming that you are at those settings and you are not seeing any black borders in the Edit Mode Monitor,  then
    Publish+Share
    Online
    YouTube
    with the Presets = High Definition Video for YouTube 1920 x 1080.
    Think about
    Also, when after I choose the Preset, I get the Google form in which to insert my Username and Password. This is not the same as the Username and Password I have to sign in to YouTube. I thought a YouTube form would pop up.
    Since this is an upload to YouTube, I would think you would use your YouTube ID and Password. The way that I have set this up for myself is to have YouTube, Google, and GMail all linked. That takes care of everything. So, see what happens with just your YouTube ID and Password and then we can decide what next on that. (I am assuming that you have separate ID and Password for Google and YouTube).
    As for
    since my video is in Spanish with all the metadata I will insert in Spanish too (title, description, tags), will YouTube accept that? I registered with YouTube in English. Will I have to reregister in Spanish?
    Not sure about that. I doubt it, but not sure. From what I have read, say your video is in English, in the upload process you can add tags for other languages such as Spanish, French, etc. I will give that a try and see what that looks like.
    ATR

Maybe you are looking for