Premiere 12 crashed during the install at shared technologies

I can't get a clean installation on my windows 8.1 laptop.

Hi There,
We’ll try again.
I do not understand why you didn’t get the attachments.
Well, I read your observations and decided to start anew.
I uninstalled all the P 7.0 stuff including preferences and rebooted my machine.
It is a HP Envy running Win 8.1 with the following:
CPU - Intel I7-4700MQ @ 2.40GHZ
RAM – 12GB
Operating System – 64 bit
Drive – 1TB SATA
17in Touch Screen
Not a limp machine.
I installed the P 7 and created a new project.
I imported the 1st of my 96 AVI files and inserted into the timeline.
I imported the other 95 AVI files but they were out of order so I found the 2nd and inserted it into the timeline.
And so on for the 3rd, 4th, 5th, and 6th, where P 7 hung up and finally told me that it could not continue and click OK to exit.
I restarted P 7 and tried to both Open or Start a Project where I got the usual notice that P 7 had run into a problem. Sorry, a serious error has occurred. Etc”.
I am super frustrated at this point and don’t think much of this software or Adobe.
Regards,
Christopher Cronk

Similar Messages

Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is runnin

question: Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is running when trying to install this, have been through this process several times. Found undertroubleshooting to delete files PDAppFlex.swf and PDAppFlex-app.xml and have done that as well. Any help will be greatly appreciated

Try Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

When setting up Elements 9 from the disk I get the message "the wizard was interrupted before Adobe Photoshop Elements 9 could be completely installed. The mentioned application has failed to install th: Shared Technologies.

When setting up Elements 9 from the disk I get the message "the wizard was interrupted before Adobe Photoshop Elements 9 could be completely installed. The mentioned application has failed to install th: Shared Technologies.

Try downloading and installing the 9.0.3 updater from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows

Elements 10 won't finish installing. it says installing required shared technologies and wont go any

I tried installing elements 10 last night and part way through it just kept saying installing required shared technologies and stayed on that and won't go any farther. I've tried uninstalling it and starting over but it won't let me do that either. It says I need to finish installing what was already started. I'm very frustrated. I'm a photographer and I need to get this problem fixed so I can finish my work. Can you advise me to do anything to fix this?

http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

Lumia 920 freezes/crashes during the night. Can't ...

I have had my Lumia for 10 days and for the second time it crashes during the night and the next morning I was not able to turn it on using the power button. I had to do a soft reset... The alarm that I set to wake me up never started... This means that I cannot trust my phone for waking me up in the morning! This is unacceptable!

There is a possible alternative to the flashing or reset suggestet by the care point.
As the problem only started recently, there is a high probability that it is caused by a bad app or setting or the combination of the two. The alternative is to reverse whatever apps you installed or settings you changed just before this problem started.
The flashing is just an easy way out because it reverts the phone back to its out of the box condition. However, you may find yourself in the same situation again should you install the same app or make the same setting changes after the flashing.
I had a similar problem with one app but I managed to isolate it and the problem disappeared after I uninstalled the app. The app was pulled subsequently and updated by the developer and is now working fine on my phone.

I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says impo

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says importing photoes but doesnt try to optimize or anything for 10 minutes. I have a 3gs with 16Gb so its not a cheap phone. I have 10Gb free. I have 6600 photoes. This is very frustrating and undermines my confidence in your products. My ipod is an ipod 4 with 16Gb also. It does the exact same thing to it. The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process. But it will import every photo a few at a time. The error message is just that itunes has stopped working. no hint as to why. AND of course, my phone is out of use for the entire time. You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is. I have tried to find solutions on your website as well as through other 3rd party communities. Ultimately they were of no use. I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
it said this
Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x14d4
Faulting application start time: 0x01ce194399f166ba
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

My iphone crashed during the update and now it wont recover.

My iphone crashed during the update and now it wont recover. I keep getting a message say " an iphone has been found thats in recovery mode, please restore it and update."
Every time that i try to restore it, is stops with a couple of minutes left and gives me the same message.
can anyone help?

How many times have you tried...?
Some Users have reported that as many as 8 or 9 attempts were necessary before success.
See Here > http://support.apple.com/kb/HT1808
Be sure to Follow ALL the Steps...

Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing the software, which it was.

Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

Crashes during the save process

Okay, so now that we’ve determined that I DO have the PrE 8.0.1 update/patch… I need to figure out why I am unable to save the video I’ve spent days working on.
As I stated in the last discussion concerning the update, I am in possession of a fairly high-speed computer that should be able to handle this kind of work.
I believe I’ve seen some other folks having problems because of the type of video they are using or importing… What kind of video should I convert to if PrE 8.0.1 doesn’t like what I am using? Oh and I have gotten the message to “Save often because you are running low on system memory” WHICH IS UNBELIEVABLE!!!
So here we go. The video that I am trying to save is approx. 10 minutes in length and is made up of still .jpg photos and videos taken from a Canon SX210 IS. I sure hope that is helpful. I looked at the file types and they are .mov files.
One other thing that may be helpful in identifying the problem… and is quite interesting… after the program crashes during the saving process, I can always go to the save location and find the entire PLAYABLE video saved in the format that I wanted (which was MP4). The only thing is that there are three separate files. 1) Complete clear audio 2) Complete clear video and 3) A third unknown file type that I can’t open. Quite strange. Oh and if you’re wondering if I tried to add open those two (Audio and Video) files in PrE and save them together yes, I did… And it crashed again.
Bob

Bob,
Here is SOMETHING to think about, regarding the Memory/Resources error messages.
This ARTICLE might be helpful at finding clues as to what could be causing the problem.
The links in this ARTICLE will help provide you with some very useful tools for checking programs and Processes, like Process Explorer.
As for the inability to Save, I would try a Save_As, and see if that helps, and does the trick. If not, try Save_As_a_Copy.
When you do Save, do you get any error messages, or does the program just not Save the Project file (.PREL)?
In case it's a system issue, can you tell us about your system in detail? Aspects like the I/O sub-system, i.e. the HDD's, their size, speed, free space, controller type(s) and how they are allocated, will be very useful.
If you are working with SD material, converting to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio, will be as good as it gets.
Good luck,
Hunt

Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca

Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 77 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.8E774FP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Errore irreversibile durante l'installazione.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {F194231A-13B9-45B9-9699-1B9AC6500263} Adobe Encore CS5.1 Library 5.1.0.0 -----------
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2710)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2726)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2728)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2734)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2736)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2738)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2740)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2742)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2746)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2748)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2750)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2752)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2754)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2756)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2770)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2784)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2790)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2792)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2794)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2796)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2798)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2800)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2802)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2804)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2818)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2820)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2822)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2826)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2836)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2838)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2840)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2842)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2844)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2846)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2848)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2854)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2864)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2866)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2870)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2892)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2894)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2896)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2928)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2938)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2958)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2980)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2998)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3018)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3020)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3022)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3024)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3026)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3028)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3066)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3072)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3074)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3084)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3094)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3118)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3156)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3158)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3160)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3162)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3164)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3166)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3168)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3172)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3174)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3176)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3186)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3196)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3198)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3214)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed

发自我的 iPhone
在 2013年10月14日，6:46，dell 2713 <[email protected]> 写道：
Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca
created by dell 2713 in Downloading, Installing, Setting Up - View the full discussion
Exit Code: 6

I cannot complete an installation of ITunes. During the install, I receive the following error message: Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

I cannot complete an installation of ITunes. During the install, I receive the following error message:
Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

When downloading itunes I get the following error messagean error occurred during the instal of assembly microsoft vc80.50727. 6195. public key token="1fc8b 9a 1e 18e 3b". processor architecture=x 86 (0x80070570 H E L P

What can I do to resolve the following error message when trying to download Itunes.
an ERROR occured during the installing of assembly Microsoft VC80.CRT. Type=WIN 32 version="8.0 50727. 6195. Public key token="IFc 8b 3b 9a 1e 18e 3b". Processor architecture="x86". Please refer to Help support for info HRESULT: 0x80070570.
CAN ANYONE HELP ME? I want to put music from my computer onto my IPOD and it wont let me unless I have ITUNES.

I'm continuing to try to get my music onto the Ipod. The last sync died +84e03 into Quicktime.qts 7.1.3.130. Exception number: c0000005 (access violation)
function: QuickTime!DllMain
66884de5 40 inc eax
66884de6 1400 adc al,0x0
66884de8 80e882 sub al,0x82
66884deb f4 hlt
66884dec fc cld
66884ded ff8bf056e87a dec dword ptr [ebx+0x7ae856f0]
66884df3 15030083c4 adc eax,0xc4830003
66884df8 0885f6743866 or [ebp+0x663874f6],al
66884dfe 397e06 cmp [esi+0x6],edi
66884e01 7d11 jge QuickTime!DllMain+0x34674 (66884e14)
FAULT ->66884e03 8b5602 mov edx,[esi+0x2] ds:0023:03c3d5ba=022404e8
66884e06 8b02 mov eax,[edx]
66884e08 6683780e02 cmp word ptr [eax+0xe],0x2
66884e0d 7505 jnz QuickTime!DllMain+0x34674 (66884e14)
66884e0f bf62ffffff mov edi,0xffffff62
66884e14 8b4668 mov eax,[esi+0x68]
66884e17 85c0 test eax,eax
66884e19 7405 jz QuickTime!DllMain+0x34680 (66884e20)
66884e1b 8b4004 mov eax,[eax+0x4]
66884e1e eb0b jmp QuickTime!DllMain+0x3468b (66884e2b)
66884e20 e86b04ffff call QuickTime!DllMain+0x24af0 (66875290)

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast. Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.

Premiere 12 crashed during the install at shared technologies

Similar Messages

Maybe you are looking for