Premiere 2014 Program Monitor extremely slow

Hi CC Community,
I am running Premiere 2014 on 10.8.4 on a powerful machine with dual GTX 580s.
I have organized my project by film days, meaning each day has its own sequence that I can jump to and scrub through.
The problem I am encountering is this: whenever I switch from one day's sequence to another, the Program Monitor window takes a very long time to update. On the scale of 30 seconds or more. Most of my footage is 2K (some 4K), which my system can handle without issue, but it still chokes up terribly when jumping through sequences.
I just sat here for almost 10 minutes waiting for the monitor to update after closing 15 of my sequences. As I imagine it, Premiere choked on each of those 15 sequences before finally catching up to the day I wanted it to land on. I have two pieces of evidence that support this theory. #1, when Premiere FINALLY caught up with where I had the playhead, I saw a flash of numerous frames that came from the sequences I had closed and also, I monitored my CPU usage and it displayed what seemed to be a series of pretty intense calculations that were not necessary. See below:
Can anyone here, or from Adobe explain why Premiere is unable to efficiently jump through sequences?
I have a 12TB hard drive array that is connected to my motherboard and is blazing fast, so it is not an i/o issue.
My CPU power and GPU power is beyond powerful enough to deal with these projects.
I have not had this issue before with CC - this is the first time I am editing on the 2014 programs though.
I do have Lumetri on my files, but with a yellow timeline, not red.
My files are either .mov or .mxf (from Sony XDCAM codec)
Thanks for your help!

Hi Sarthak,
I use Lumetri. That comes with the 2014 build though. I see no reason why it should be slowing Premiere down so much.
As I said, these issues didn't exist with Premiere CC. Have any more significant ideas as to why this is happening?
File import is also extremely slow.

Similar Messages

All design programs running extremely slow and takes forever to save and sometimes shuts down randomly?

Ok so I'm a design student at a community college (about to graduate soon and will be continuing on getting my BFA) I have all of the creative cloud suite. I have Illustrator, Photoshop, Lightroom, InDesign, etc. Recently I started having problems with all of the programs. Whenever I work in the programs they would run extremely slow. Recently, I tried to save a .eps file that was only about 1.2 GB and it took me an hour to save, and this was when I was working off of my computer desktop. When I place the .eps file in Indesign, everything would go blank and it would freeze up. Also I had an error sign popping up from InDesign saying "out of memory". Im not sure if that is related to my computer's hard drive or indesign itself. I just started using creative suite so the creative suite is pretty new to me. Sometimes in Indesign when I do the Command+w to preview the whole project, it would be completely black and showing nothing and I would hit escape and the whole software screws up. Then I would do a force quit on the software and then Indesign would say there was a serious error and must shut down. That error message has been popping up several times now. I also talked to Apple support and they suggested me doing a Repair disk utility (which I am currently doing right now) and also recommended me contacting Adobe since they know their software. I checked software to see if there is any updates that is needed but everything is up to date. I'm not quite sure why its acting like this so I'm reaching out both to Apple and Adobe to see if both can help me solve the problem. If anybody had experienced this problem before and could help me troubleshoot this issue that would be great.

I installed the creative suite about a year ago, and this just started happening last weekend. I didn't think it would be a problem and that it would last for a day since I was working on InDesign all day and Illustrator and it usually goes away after I finish using the programs. But this has been occurring for about a week now and has not gone away. and yes the other programs are running slow. I was trying to resize some images for a client and Photoshop was acting extremely slow when I was trying to resize the image and also place an image into a 8x10 document in Photoshop. I'm not sure how to find my system specifications.
All design programs running extremely slow and takes forever to save and sometimes shuts down randomly?

Firefox program is extremely SLOW.

I have used Firefox for a long time. I don't know what happened lately, but my Firefox is extremely SLOW. Takes minutes to change or to move to another item or chose another TAB. For awhile the screen would get weak and fad almost blank. When logging in to Firefox, it takes 4 to 5min. for Firefox to become active. My wife uses Internet Exp. That browser works good for her. I also, have Google Chrome and it works OK.

I too am having this problem. Or it just freezes. What the hell? I thought updates were suppose to be an improvement, not a back step. What can I do to solve this problem? I'm getting really ticked.

Premiere Elements 9 running extremely slow on Core i7 Win7 Quadro system

Hello,
We've had a single installation of Premiere Elements 9 for some time now and for love nor money we've been unable to get it working properly, i've tried all manner of driver combinations for graphics and motherboard and the problems persist. Basically, the software refreshes extremely slowly, you can't even consider scrubbing the timeline, this happens regardless of what is placed on the timeline, it can be a series of tiny little jpegs all the way up to 1080p mp4 or even raw video, Premiere Elements just does not want to play ball. Now, I trialled the software on another PC of bog-standard spec with built-in graphics card and it ran very well but on our MediaPC it is totally unusable. Any help at all would be apprciated/ The spec of the PC is as follows (plus all software and drivers are up-to-date):
Windows 7 64bit (6.1.7600)
Core i7 950
8GB RAM
NVidia Quadro FX1800 (8.17.12.9573)
And we're using media files that are stored locally.
Many thanks
Andy

What project settings are you selecting when you start up your Premiere Elements project? If you're selecting the correct project settings for your video, there will be NO red lines above your clips when you add them to your timeline. Is that the case in your project?
You say you're using .mp4s as you source video, and that could be part of the problem. Most .mp4 formats (from smart phones or pocket camcorders, with the exception of the Flip) are not supported natively in Premiere Elements. What make and model of device produced this video?
Also, you say your video is 1080p, which is also not supported by the program. HD video to be edited in Premiere Elements must be shot in 50i or 60i. Progressive scan frame rates in AVCHD files are not supported in version 9.
Finally, you say the program even chokes on photos. Have you ensured that your photos are no larger than 1000x750 pixels? Even "small" JPEGs can be many times this size, and soft-rendering this video source can also choke the program.
With a good match between source video and project settings, the program should fly like an eagle on your hardware.

Premiere Pro CS6 moving Extremly Slow, No solutions. I quit.

Im uninstalling this software and counting my losses. Not a professional editing platform. After hours of searching online there are no available solutions. And MANY others are experiencing the exact same thing as I am and Ive tried on 3 Mac computers all recent models and the same result. All of my computers are at least $2500 a peice and have the maximum amount of ram available and its not enough. Last year I edited an event with Premiere Pro CS5.5 with no problems, and this year the same event I have to start editing again from scratch because I cant even open it in CS5.5. Im a die hard Adobe customer but this really does it form me in terms of CS6 im OFFICIALLY DONE. I cant even finish a 3hr project that Ive been working on its that bad. Definantly not recomending this to ANYBODY that puts any sort of value on there time.

A lot of people are using Premiere and Mac successfully. Usually the more professional a user is the better they are able to keep there system up and tuned. One of the keys is having a dedicated edit system, getting any bugs ironed out then leaving it alone.
That's not to say that everything is rosy in Abobeland. The user forum is saturated with Mac users, which are a minority of users. One could expect an influx of questions from FCP refugees, but so many technical issues? One culprit most be the obvious overhead computing requirement to run Premiere efficiently. The lowballing of recommended system requirements listed in the adverts, courting Mac users whose macbooks and iMacs were not built for native HD editing have lead to a number of issues and disappointment.
And at the same time there seemed to be OS & software conflicts. Many Mac users were surprised that they experienced problems after upgrading their OS to Lion, even though CS 5 was designed for, and working on the previous operating system, and was released over a year before Lion.
I can't speak to your specific issue, but I wish you luck.
Message was edited by: Stephen_Spider because he can't form a cohesive sentence on the first couple of tries.

Dreamweaver cc 2014 running extremely slow

Dreamweaver CC 2014 is running extremely slow - with essentially no response (using split mode or any other mode). My version of CC runs perfectly - quick & clean. I haven't changed anything - all I did was install the new CC 2014 and tried it out and it basically doesn't work. What is going on? I have a 2012 iMac - my OS is updated plenty of RAM, etc. I have a lot of fonts open but this has never effected any other program - just wondering if maybe behind the scenes its reading all of that stuff (why would it?).

1. Re: Dreamweaver cc 2014 running extremely slow
Preran
I've determined why MY Dreamweaver 2014 was "slow." BUT AGAIN, I HAD NO PROBLEM running CC with the exact setup.
I'm running and I-Mac with OSX (version 10.9.4) 3.4 GHz Intel Core i7 and 16 GB of 1600 MHz DDR2 ram.
I have 8 exterior drives with 10 Terabytes total.
I noticed lots of activity accessing drives when running Dreamweaver 2014. I unhooked all drives AND DREAMWEAVER 2014 acted "normal" with it's spinning cursor retired.
Again, no problem with all of the drives on while using Dreamweaver CC.
Any thoughts from DreamWeaver/Adobe?
Thanks,
Greg

Premiere CC 2014.2 won't play source/program monitor

I recently installed Adobe Premiere CC 2014.2, and since then no video plays within it, or the source and monitor or the program monitor. I'm on a Dell Inspiron notebook 2.1gh i7, 8GB memory, Intel HD Graphics 4000, ATI Radeon HD 7700m. Was usually working with the previous version, but now despite render normally, he does not play in the Premiere.

>Intel HD Graphics 4000, ATI Radeon HD 7700m
Dual adapters can cause serious problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Rendering white flicker on the program monitor and output video file. How to get rid of this flicker in adobe premiere pro cc 2014?

Hello,
I have been working with long sequences in adobe premiere pro cc 2014. All of sudden, I see white flicker in the program monitor and rendered output too. The flicker does not follow any pattern. It is very random.
How to work around on this?
Regards
Naveen Alle

Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
Mylenium

Premiere Pro CC 2014.1 - end of media indicators different in source and program monitors???

Here are two screen grabs showing the right edges of the source and program monitors in PPCC 2014.1. Does anyone know why the end of media indicators are so different? Left is source monitor, right is program monitor.

Those are actually different indicators. The one on the left is the end of media indicator, which lets you know there are no more frames in the source clip. The one on the right is commonly known as the end of sequence indicator, which can also get to in the Source Monitor if you play a clip to the end and then hit Right Arrow.
Both indicators are controlled by the same option in the Overlay Settings dialog: End of Media/Sequence Indicators.

How to Change Program Monitor Closed Caption From 608 to 708 in Premiere Pro CC 2014 latest release

SInce the update I can't seem to be able to switch my program monitor to see 708 it just gives me 608 as the option.

Kevin Monahan wrote:
Is your Mercury Playback Engine set to CUDA or OpenCL? Make sure it is in CUDA.
Yes, it is.
Does this happen with brand new projects, as well?
Yes.
Have you checked the permissions of all your Adobe folders? Are they set to Read Write?
They were all set to read/write, I did the procedure as outlined in the link.
Have you checked the permissions of your Mac HD and your media drives?
Yes.
If you create a new user with Admin privileges, does that work better?
I have not tried this yet.
If you disconnect your media drives do you see any improvement in stability?
No.
This problem does not, to me, seem to coincide with the either the OS upgrade or Software upgrade. It has begun to appear over the last week or so, and is occurring more and more often.
Any help you can give appreciated.
MtD

Adobe premiere cs6 suddenly EXTREMELY slow and CPU intensive

Hi everyone,
I'm editing candon 5d mk III footage (h.264 files) on my late 2011 MacBook pro. Here are the specs..
240 gig SanDisk SSD harddrive (190 gigs free)
500 Gig (250 gigs free)
8 gigs ram
2.4 ghz i5 processor
Intel HD graphics 3000 graphics card
I'm a wedding videographer and I am currently closing my last edits of the season. I have edited 20+ 45 minute videos on Adobe Premiere CS6 and have had absolutely no issues at all. I enjoy working on premiere so much that I've been trying to get my videographer friends to give a shot and simplify their workflows.
Upon starting my second to last edit (same process as the other 18 videos I've done this season, organizing the footage within it's respective folder, loading it into premiere with the couples' choice in music and opening 4-5 new sequences based on the events of the day) I noticed that I was having a lot of trouble importing folders into my media bin. I had to import all of the footage unorganized because loading the folders "Preperation, Ceremony, Photos, Reception" with the footage within them would cause premiere to freeze and become unrepsonsive. So, finding no solution I added all the footage in no particular fashion. Just one large unorganized group. Then, while organizing the files into bins, I noticed even the smallest move would take several minutes to complete. Because I was working directly off of my hard drive I figured these kinds of delays would eventually catch up to me, so I moved all of my files to my HDD and decided to work on them there. The project itself continued to be extremely slow and started crashing regularly (especially when applying audio effects). After a few hours, I stopped being able to play 1080p video at all. It would jam and stutter so often it become unuseable. 720p video was the next to go along with my ability to render anything in less than 30 minutes - 1 hour. At last attempt to use premiere I was getting an "Unable to compile movie - Unknown Error" message when trying to render alpha channel things (lower third titles and things of the nature), my ability to change the resolution of the playback had disappeared (Going from full, 1/2 and 1/4 did nothing, it just remained at full quality) and finally doing anything in premiere caused it to use 300% of my CPU (based off of my Activity Monitors metering).
Does anybody have any clue as to what could be happening to my machine/program? I have a yearly subscription to adobe's creative cloud service if that helps. Oh and I've tried moving my media cache's from my HDD to my SDD with little or no results. Don't know if that helps.
Thank you to anyone who helps in advance. What I believe to be clean installs aren't doing anything so I'm hoping somebody can give me a hand.

Sounds to me like specific media is dragging the Mac to a halt. (300%, really Apple? Isn't that like saying that my car can go up to 90mph, but last night I drove it at 300% speed, 270mph)
Some things to trouble shoot:
Do you have any assets in the project that are loaded directly from strange devices, like a SD card or CD audio? Any dynamic link media that may be problematic?
Is there anything that makes this footage different than footage from successful projects?
Can you work successfully with an old project?
Can you successfully start a new project using different or less media?
Is the 500 GB drive internal or external?
One time I was sent out at from work to troubleshoot a system that would freeze up like yours. The guy was an idiot and rude client that demanded that someone from our facility help him fix his own project. He said that he had been troubleshooting for a day, and then had convinced his organization's IT guy that he needed a way over spec new pc to run Premiere.
His system was fine. Within 3 minutes of checking media in his project, I saw that top track of the problem sequence had a video clip that was set to a speed of .01%, and he had the clip stretched for 24hours in the sequence. His project was supposed to be a 2 minute PSA. All his issues went away after removing the idiotic Day Long slow motion clip. He complained to my boss because I had laughed at him.
I relate that story to illustrate that it could be a weird thing with you media or fx, just as well as a hardware or software issue.
Good Luck

Zoom (Accessibility feature) is extremely slow with multiple monitors [OSX 10.10]

When connecting an external display to my Laptop and using the "Ctrl + Scroll" functionality for accessibility zooming, the display/graphics are extremely slow.
An estimate of FPS would be sub 1FPS. The machine becomes unresponsive and is unusable for a minute or so, until I can get it zoomed back out, and it begins responding normally.
This is very disruptive, as its a feature I use often.
The same laptop on OSX 10.9 did not exhibit this issue.
Hardware: MacBook Pro 13" Retina Mid 2014, 16GB Ram
Software: OSX Yosemite 10.10
System Information: http://cl.ly/image/0H1p032w0M0w
Reproduction steps:
1. Enable CTRL+SCROLL zoom functionality in System Preferences > Accessibility
2. Connect external monitor (Display port cable)
3. Hold CTRL and Scroll to zoom
4. System becomes slow, graphics slow, showing < 1 FPS without any other applications running

Just to note, I have the same problem....
When you use Thunderbolt display with 15" MB Pro late 2013, it zooms unreasonably slow.
But when you close the laptop display and only have the Thunderbolt display on, it zooms a bit faster, but still too slow for such a new laptop.
I think it could be optimised a bit better, something somewhere can be improved here.
Regards,
Ned

My mini Mac with a i5 processor is extremely slow to open documents and programs. Is there a solution to this??

Anyone can asset me please. My mini Mac is a 2.3 GHZ i5 Core. 8 GB Ram 13333 MHz with OS 10.7.5.
Pretty much since day one this computer is very..extremely slow to respond to any command. Opening documents or programs the system spin for ever.
Any idea what could be causing this??? I was told that to many pictures slow down the system, I have only 700 pic on file

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Sluggish timeline and glitching/freezing program monitor in Premiere Pro CC 8.1

Hi all,
I've recently switched from CS6 to the 2014 Adobe CC due to a student license expiring. I'm also somewhat new to r3d workflow so chances are I may be doing something wrong.
I've worked on one other project with a mix of r3d and DSLR footage in CS6, but this is my first time cutting with red footage in Premiere CC.
*Apologies in advance for the novel, but I figured I'd be as thorough as possible to hopefully help get this issue resolved for myself any anyone else who's experiencing this.*
I'm cutting a 9:30 "party mix" in a music video style edit. So far I've had several (seemingly random) issues and glitches, that have been making my life exceptionally difficult and this 10/30 deadline exceptionally scary.
I'm working with content that we captured using exclusively RED Epic Dragon, and Epic Mysterium cameras. We recorded with several different frame rates, with varying resolution, compression, and aspect ratios. Project was set in-camera to 23.976.
Issue #1
I've created a nearly two hour, organized roll of sub-clip selects in a RED R3D 2K 23.976 16x9 timeline, in which i'll use to browse my raw media when sequencing on a timeline stacked directly below.
Often times when pulling clips from one timeline down to the other, the over-all responsiveness of the program will become ultra sluggish. Causing a clip (that's being dragged/placed) to lag heavily, maybe a couple seconds behind my cursor. This issue will often resolve itself after maybe 5 minutes or so, but makes fluid sequencing rather difficult.
Issue #2
The other issue I'm having is a glitchy or completely unresponsive program monitor. Again this issue appears to be totally random, and seems to happen most when I'm deep into some really intense sequencing/ clip arrangement, and scrubbing quickly.
Usually a portion of a single clip (or sometimes a couple clips) will freeze up in the program monitor while I'm scrubbing over them on the timeline. This will sometimes cause them to freeze all together during playback as well as cause surrounding clips to lag a bit (maybe 4-8fps).
I'll scrub back over the problem area and sometimes get a solid green bar halfway through my image, usually right before the program monitor just reads solid black throughout the entire timeline. This issue is temporarily resolved by restarting the program (about every 15-30 minutes).
Issue #3
As I'm scrubbing I'll also experience heavy glitching with both my image and the program monitor GUI itself. However, this issue typically wont affect playback.
I've uploaded a quick camera-phone video of this issue as it's a little tough to describe Program monitor glitch - YouTube
I know the timeline is un-rendered in this sample, (but this issue happens either way).
Two painstaking weeks later, I've finally completed the first pass.
Working on revisions now, and ultimately I'd like to copy paste the sequence into a 4K timeline for before After Effects work and export.
I tried pulling it into a 4K timeline (with playback set to 1/8 res) and the issues stated above got 10x worse.
Sticking to the 2K timeline for now (with playback at 1/4 res)
P.S. I'm also cutting a much simpler corporate project with 5DMKIII footage and having no real issues.
As for my rig,
I'm running Adobe Premiere CC 2014 v8.1
Freshly installed Windows 7 Professional SP1 PC Desktop
Freshly installed Samsung 1TB SSD running my OS and Adobe CC
Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
16GB Ram (3gb allocated for other programs)
Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
Thanks for reading!
-Sam

So it seems to be behaving slightly better in "Software Only"
Though slightly less frequently, I'm still running into the issues stated above, mostly issue #2.
I also have a new problem to add to this thread as I'm starting to pull clips into After Effects.
First being that (again, seemingly random) dynamic-linked clips decide not to show up on the timeline in AE, and then seem to vanish from the program monitor in Premiere as well.
As you can see in the screenshots attached- After Effects see's the media itself from which the clip came from, however it won't show up in the monitor.
I'm also having issues where I'll render the Premiere project with the dynamic linked clips that DO work, and then as soon as I restart the program, those previews are gone and I have to re-render the the AE Linked comps.

Can someone tell me how to access Illustrator CC on the cloud. I currently have CC 2014 but I do not want to use it since it is extremely slow for me.

Can someone tell me how to access Illustrator CC on the cloud. I currently have CC 2014 but I do not want to use it since it is extremely slow for me.

The Cloud is a delivery process... you still install the program(s) on your computer, and then pay a subscription fee to use the program(s)
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
-Cloud status check 30-or-99 days https://forums.adobe.com/thread/1549838
OR buy the 3 year old version which is a one time payment Creative Suite 6

Premiere 2014 Program Monitor extremely slow

Similar Messages

Maybe you are looking for