Premiere 9: Incompatible Driver...

This warning keeps popping up about an incompatible driver. Adobe Premiere Elements 9 has been working for me before this. The program works but it cannot display the actual clip. Sound works, but it just doesn't show anything. Please help me!!! I need this editor for a project due this Friday 12/17/10!
It says "We have detected an incompatible display driver. To get a better and faster playback performance, please update your display driver Display driver details :Intel - Intel Cantiga 1.5.0 - Build 7.15.10.1502"

The same can be said for Intel - great chips, but where video is concerned, lousy driver support.
With most computer programs, if one can get a display on the monitor, all is pretty good. However, with NLE work, things are not so good. Those programs (some, more than others) need to interface with the driver at a very high level. Same for 3D applications. If the driver is not working 100%, they will not either.
Now, PrE is an entry-level program, but still relies heavily on the video (and audio) driver to work properly. Many folk are pressing "normal" computers into service with it, and also CyberLink PowerDirector, Sony Vegas, Magix MovieEdit Pro, and similar. It's easy to hit a performance ceiling with these units, and if one adds in AVCHD, or other H.264 sources, things must be tuned to 100%, to run acceptably. With PrPro, AVID, FCP, and similar, most users are already on much stronger computers, but can still have the system brought to its knees by just a bad, outdated/obsolete video driver. With 3D apps, most users are also on workstations, but there is that same vulnerability. The system is only as good as its weakest link - whether a video driver, the CPU, or the I/O sub-system. All are potential bottlenecks. The CPU and the I/O are pretty fixed, and so long as they do not go bad, they will continue to perform at the normal rates (until HDD's start getting filled up), but video drivers can be rendered obsolete by such simple things as an OS update, or hot-fix. They are probably the most vulnerable aspect of the system for video editing.
Good luck, and at least you have the benefit of the nVidia chip - most do not have that luxury with a laptop.
Hunt

Similar Messages

Adobe Premiere Elements 9 Driver Update Problem

I have had Adobe Premiere Elements 9 for almost a year now, and I had just made a movie with my friends. When I go to launch Premiere Elements it says "Incompatible display driver, please update your display driver. I am on a Dell Inspiron E1705 laptop. (I know, it is not a great computer for video editing, but it is what I am stuck with.) I have tried to delete the BadDrivers.txt file and it is still no use. I have also reinstalled my drivers (there were no updates after 2008) I have been able to use Premiere Elements perfectly until today. I don't know what is going on, so somebody please help me.
Thanks,
Eric

That machine is pretty underpowered for PRE, as you acknowledged, so it could just be that your current project is too large or more complex than your previous successful projects. The maximum memory is only 2GB and that is barely enough to start PRE on top of Windows itself.
But, encouraged by the fact you have had successful projects, I'd first look at how much defragmented disk space you have. Really you should be looking for at least 40GB free and defragged. That your machine supports only a maximum 100GB drive strongly suggests to me that you just don't have enough available.
For general disk space cleaning take a look here: Re: Clean, Lean & Mean Editing Machine - One Workflow. Check out the rest of that discussion - lots of good advice on optimizing a PC.
For PRE specific cleaning I suggest you remove all cache files through Edit> Preferences> Media> Clean.
Also look to your past complete projects. Consider using the Project Archiver to archive off completed projects to an external hard drive, and then delete the Adobe working folders for those projects (much easier if you have managed each project through a project specific folder). You can also manually check for the working file folders by looking for their folder names:
Cheers,
Neale
Insanity is hereditary, you get it from your children

Premiere Elements 12 - driver problems

I just purchased PE 12 and looks like I am not the only one having 'incompatible display driver' problems. I am using an HP Pavilion dv7t 6C00 CTO Entertainment Notebook PC. The drivers in the Device Manager are:
Intel (R) HD Graphic Family, Driver Date 09/30/2011, Driver Version 8.882.2.3000
Radeon (TM) HD 7470M, Driver Date 09/30/2011, Driver Version 8.882.2.3000
I have tried to find updated drivers, but an not having any luck
Suggestions?

Dual video problems (some for Premiere Pro, but the idea is the same)
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575

Elements 11 - incompatible driver

I am trying to run Adobe Elements 11 on a Samsung NP300E5C laptop on Windows 7 but it errors when I try to start a new project from the welcome screen stating that it has found an incompatible display driver and I should update (Intel(R) HD Graphics 4000).
I have gone onto the Samsung website and downloaded the latest driver for this model, and I have tried to download the lastest update from the Intel website but that errors saying that it is incompatible with the hardware, I have done as many Windows updates as I can, but it still doesn't work.
Once Elements eventually fully opens, the mouse jumps around alot until it grinds to an eventual halt.
Can anyone shed any light on what to try next?

Display driver & Baddriver http://forums.adobe.com/thread/1328594 has some reading that may help

Backup of all adobe programs, reinstalled my mac, installed maverick. transferred adobe premiere from backup drive to new osx. error message on startup. error: 16

What to do?

delete everything your moved.
then clean and properly install your adobe programs, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Premiere elements displays incompatible message

When I try to run pre12 I get the message that an incompatible driver is needed that runs faster. I have the latest driver for Intel HD grphics mobile and MD 6770m graphics card. I deleted badtxt. It didn't help.

Windows or Mac? (either way, read below)
Dual video problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
-Mac Utility http://forums.adobe.com/thread/1017891?tstart=0

Adobe Drive and Adobe Premiere

Is it possible and/or practical to use Adobe premiere with Adobe Drive to work with content from a DAM system?

Adobe Drive does not have integration code in Premiere as PS, AI or ID, so you can not check in or check out a file from Premiere. However, Adobe Drive can still mount the DAM server as a local drive, and you can use check-in/check-out from OS explorer or Finder.

Premiere Elements 9 PC: Major Importer Failure

I think that I have gone down every troubleshooting road on trying to discover why "all of a sudden" Premiere Elements 9 PC will not import anything via Get Media/Files and Folders into its Organize interface as is its default behavior. The program fails at that point and shows the message "the program is not responding". Yet if you force the closure of that particular project and reopen a new one, you find that those media that failed to import into Organize in the first project now are live and well in the Organize of the new project. You can drag them from the Organize to the Timeline and use them in this new project. All other functions of Premiere Elements 9 PC appear unaffected by this import failure. AND, source media can be video (any format and size) and photos (any size). This happens even with import of the first and only file being a jpg (800 x 600 pixels).
My history of Premiere Elements 9 PC/baddrivers.txt file/ and "incompatible driver messages" is well documented in these forums. That involved Windows XP Professional SP3 32 bit and a NVIDIA display card. And, I have been moving along successfully with Premiere Elements 9 PC for several months. About two weeks ago, I upgraded my computer to Windows 7 Professional 64 bit Intel Graphics Card, and Premiere Elements has been performing great until yesterday when what I call "major importer failure" struck. The computer has about 800 GB free hard drive space and about 2.5 GB out of 4.0 GB of available RAM. All of this worked great for about two weeks and now suddenly this yesterday. Did I do anything different or unusual? I think not. I also have Premiere Elements 7 and 8 on this same new computer, and they continue to function perfectly in all respects, whereas Premiere Elements 9 does not. AND, yes I have had the Premiere Elements 9.0.1 Update installed and in use before and after the importer failure.
Troubleshooting has included
a. Uninstall/Reinstall from Premiere Elements 9 installation disc + uninstall/reinstall of QuickTime + Photoshop Elements 9 as well.
b. System Restore (as well as a restore of an earlier version of the installed Premiere Elements 9.
c. Removal of possible interferring program, such as, Nero InCD.
d. Removal of recent Windows Updates
e. Uninstall/reinstall of Intel driver since at one point in the failure the Edit Mode Monitor was displaying part of the Disc Menu Section while the program was in the Organize Mode.
f. Have looked at permissions, running as Administrator, etc.
One of the things that I will try this morning is installing Premiere Elements 9 PC on the previous system Windows XP Professional SP3 32 bit to see if there is any major importer failure there at this time.
If anyone has the time, I would appreciate any comments on a troubleshooting avenue that I may have overlooked. This appears to be another Deja Vu all over again. I hope not.
Thanks.
ATR

Neale
Thank you for your interest in this issue.
I still have not pin pointed why my Premiere Elements 9 works great EXCEPT it will not import media into the Organize with Get Media/Files and Folders and attempts to do that drive the program into unresponsiveness and extreme difficult closure, even with the Task Manager.
Yes, I have already looked at the workaround that you suggested for moving forward in my Premiere Elements 9 PC project, that is, entering all my source media into the Elements Organizer (can do from Photoshop Elements side) so that the source media thumbnail will be in the Premiere Elements Organize "ahead of time", and I will not have to depend upon Get Media/Files and Folders to get that job done.
But, until I hit the key to this, I think I have an almost perfect better way. My computer is now Windows 7 Professional 64 bit that comes with the Windows XP Mode. Essentially what you have in this mode is a virtual Windows XP Professional SP3 32 bit machine (best I can determine, Microsoft Generic Card). I can install Premiere Elements 9 (same serial number as on the Windows 7), and IT WORKS, no problem with the Get Media/Files and Folders. The one glitch in this perfect solution is setting up to burn to DVD. The Windows 7 Windows XP Mode Virtual Machine will not recognize installed internal DVD/CD drives when you go to write a DVD. The explanation is that the optical drive in XP Mode is a virtual device - read only. I have confirmed this. In order to use Premiere Elements 9 PC burn to disc in this Windows XP Mode , my answer here appears to be plugging in an external DVD burner USB and then using the USB Attach of the Windows XP Mode.
When Premiere Elements 9 PC was released, I was forced into much troubleshooting of the display issues which are very widely documented here. But then I was using "a real" Windows XP Professional SP3 32 bit" with a NVIDIA card. In the trial version, the BadDrivers.txt and VideoRenderer.dll got me through that episode. For me, the purchased version "essentially" was not afflicted with these same problems, and it has been running great. Now when I go to a new computer system for better performance/greater computer resources (by the way, Intel HD Graphics card), Premiere Elements 9 runs great for two weeks and then this no Get Media/Files and Folders matter sets in accompanied by program going completely knocked out by the event. In all of this, old or new, I have Premiere Elements 7, 8, and 9 installed on the same computer. While Premiere Elements 9 is being hit with these issues, Premiere Elements 7 and 8 are not , same computer environment, same source media, same project preset, et al. For me, the Premiere Elements 9.0.1 has not hit the mark.
I have done extensive troubleshooting of the this current matter, too long and involved to go into now. I am preparing a full detailed description of the issue and the troubleshooting that went into the search for a fix. I will be posting it at the forum that I frequent. When I post it there, I will supply a link to it for whomever is interested. I have filed a bug report with Adobe on this matter in abridged format as per the space provided in its bug report online form.
Thanks again for posting.
ATR

Premiere Elements 9 Tryout Serious Display Problem

I will confine my editorializing to "Deja vu, all over again" and describe the Premiere Elements 9 problem that sounds like I was reliving the release of Premiere Elements 8.
I downloaded and installed Premiere Elements 9 tryout, and it worked great for about 7 days. With no changes in the computer environment, suddenly when Premiere Elements 9 was loading a new project, it would stop at PlayerMediaCore.prm and pop up a message:
"We have detected an incompatible driver. To get a better and faster playback performance, please update your display driver. Display driver details: NVIDIA Corporation GeForce....." and it went on to fully name my video card driver. When I clicked on OK, the program continued to load completely and opened to the workspace where the Edit Mode Monitor performance was, best described as, wacky....Timeline content that would not present in the Edit Mode Monitor, Preview Windows that froze in the Edit Mode Monitor, etc. And, Edit Mode Full Screen Previews did not work at all. The technical irony in all this was that I have Premiere Elements 6, 7, and 8/8.0.1 all installed on the same computer, and all were still performing great when I was using them one at a time as a control.
When I went to Hardware/Device Manager and attempted to "update" my NVIDIA card driver, the "update" that installed automatically was older than what is was replacing. BUT, now Premiere Elements 9 did work as expected. HOWEVER, now my Premiere Elements 6, 7, and 8/8.0.1 were crashing at various times from loading to opening of the workspace. I am still hunting for a replacement NVIDIA driver that will fix the Premiere Elements 9 display issue and not kill my Premiere Elements 6, 7, and 8/8.0.1.
In investigating this matter, I noticed that the Premiere Elements 8/8.0.1 "Enable GPU Playback" is gone in version 9. And, now, if you right click the Premiere Elements 9 Edit Mode Monitor, you have a Playback Quality option of Automatic or Highest. That tells me that Adobe was at work making changes in the name of better. And, I am wondering if what I am encountering is related to Adobe's attempted improvements in display which was one of the issues in Premiere Elements 8.0 when it was released. Or, could this be related to making AVCHD a native format? Lots of possibilities.
The above is my long way of saying "Has anyone run into this type of situation with Premiere Elements 9, any workarounds found (other than buying a new video card just for Premiere Elements 9, ???"
At this point, I know of one other person who got a similar message from Premiere Elements 9 and resolved the problem by updating the NVIDIA card driver. But that still raises the question "Do we need a special video card driver just for Premiere Elements 9?" and "Why?"
ATR

To Vijay and A.T. Romano:
I am happy to help out any way I can. First, I do plan on installing PE9.0 on 2 other computers, both running Windows XP. Currently, both of these computers (Dell desktop and laptop) have PE2.0 running, with no problems. I will try to do these installations later on today.
The 2 new computers have Windows 7 Ultimate 64 bit. While I have installed PE2.0 on these computers, the program runs slowly. I assume PE2.0 and Windows 7 are not compatible. As I mentioned before, PE 9.0 runs fine on the Dell desktop. It does not play videos on the Sony laptop.
The contents of the text file are..
##FALSE#0#0#0
The error message when the program is launched is..
Display driver details :NVIDIA Corporation – GeForce GT 330M/PCI/SSE2 3.0 NVIDIA 188.67
I do hope this help. I can only guess that the problem is wide spread.
Thank you again.
Alan Silberlight

Adobe Premiere elements 11

So...
My Adobe Premiere elements 11 stopt working today...
Last time a used was yesturday and then it workt fine but now it keep saying "an incompatible graphics driver has been identified. If you want a faster and better playback performance update date you graftikdrivrutinen.
Information about grakifdrivrutin: ATI Technologics Inc. - AMD Radeon R7 200 Series 3.0.12618 Compatibility Profile Context 13.251.9001.1001"
And when the program starts my PC freeze.
And i have updated my AMD Radeon R7 as it says but same answer. And on my version of the AMD Radeon R7 is 13.251.9001.1001 and there is no more update for it but it was a update as it says but not anymore because i updated it to it.
Please help me =/
====================================================
Moved from Premiere Pro forum to Premiere Elements.

Display driver & Baddriver http://forums.adobe.com/thread/1370916?tstart=0

MacPro 1,1 is not recognising Hitachi DeskStar 7K4000 drives

Hi,
I have just ordered two Hitachi DeskStar 7K4000 drives and neither of them is appearing in Disk Utility or mounting.
In System Profiler they are listed is Unknown, although apparently the link speed has been negotiated to 3Gbs, which is what I would have expected.
The MacPro is currently running 10.6.8
Everything I read about them said they would negotiate down from 6Gbs and work fine on the older SATA Bus, which they appear to have done.
I've tried a jumper on the only pin available on the drive, which I understand would force down the link speed, but this has not worked either.
I guess it's possible that both drives are DOA, but it seems kind of unlikely.
Have I ordered incompatible drives? Any ideas?
Many Thanks,
Sam

As a follow up incase anyone is interested, I contacted Hitachi directly and the 7k4000 is compatible with the Mac Pro 1,1 and SATA-300 (SATA II) as well as SATA-600 (SATA III).
Basically this means the drives were faulty.

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Adobe Premiere Elements 10. Is it sensible to upgrade my memory to 32 Gb?

I have the following configuration (bought in September 2011).
Asus P8Z68 DELUXE, Z68 chipset
Intel Core i7 2600K 3.4 Ghz 8Mb
Kingston
Crucial SSD M4 128 Gb
Asus GeForce GTX560 Ti DirectCU II TOP 1GB 2xDVI
WD 2Tb sata 600 (black edition).
Windows 7 prof 64 bit.
Adobe Premiere Elements 10 + Photoshop Elements 10
On the 128 Gb SSD I installed, Windows 7, office 2010, Adobe elements software and the SSD is used for temp/swap-drive for Adobe elements and Windows 7.
The second drive WD SATA 600 black 2 Tb is used for all my video and photo material.
When searching on the internet and on this forum I understand that till Premiere Elements 9 Adobe didn’t use the RAM memory above 3 Gb because of the 32 bit adobe-kernel of the elements series.
Can and will Premiere Elements 10 (or higher) use the memory above 3 Gb?
When I install 32 Gb (4x8 Gb) of DRAM Memory the recommended windows swap file will be around (2x32 =) 64 Gb. With windows 7, and some software installed there will be not much space left on the SSD drive for the adobe premiere elements temp-drive. I probably have to set the temp-drive to the WD 2 TB sata 600 because there is more free space left.
I'm not sure if it is sensible to upgrade my memory.
1 Is it sensible to upgrade my memory to 32 Gb? And will it likely increase the rendering-speed of premiere elements 10 (or a future release premiere elements)?
2 Is it sensible to upgrade my memory to 16 Gb (4x 4Gb)?
3 The 32 Gb memory-upgrade costs around 300 euro/dollar. Is there a better way to improve the rendering speed (I’m not comfortable with overclocking the system)?
Hope you can help me out with this question.
Thanx!

What RAM is currently installed?
What kind of video are you processing - Standard Def. High Def. Full HD ?
What kind of durations do your project have?
Generalising, based on what others have posted, 8GB seems to be the minimum recommendation and 16GB should be excellent - if you can get 2 x 8GB you have the option for another two later.
You might want to consider a second hard disk for your temp files.
remkosp wrote:
When I install 32 Gb (4x8 Gb) of DRAM Memory the recommended windows swap file will be around (2x32 =) 64 Gb.
Since Vista I don't think that generalisation is any longer relevant. It was much more appropriate to XP and when machine RAM was still measured in MB rather than GB. With 16GB or more real RAM there shouldn't be that much need for swapping to disk anyway.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Error 0xE0000235 when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.

Unfortunately, Error 0xE0000235 occurs when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.
I am installing the GV 800 GeoVision 32/64Bit 16CH Video Capture Card onto the server.
Please urgently assist.
Answer in clear English. Cryptic answers not welcome. Yes...I know you are an intelligent, highly valuable expert on the world's leading edge technology.

Hi, I'd like to inform you that the error code 0xE0000235 refers to "Error in WOW64". This can be caused by corrupted or incompatible driver of the Video Capture Card. Similar issue may also occur on other driver on other operating system and I don't think
this can be caused by SBS2008 blocking the driver.
I suggest you contact with GeoVision Technical Support (http://www.geovision.com.tw/english/4_0.asp) and see if their driver should work on SBS2008 and make sure that you have downloaded
latest driver from their site:
http://www.geovision.com.tw/english/5_2.asp
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope this helps!
Sean Zhu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I need some drivers for my CD-RW/DVD-ROM drive

I have been going through the apple site for a few hours here and I would really like to speak to a human being about this. This is not hard. I have a Pismo PowerBook G3, which I purchased online, used. Wiped the HD when I got it, installed 10.2.8. Updated iTunes to version 6.0.5. I get an error message when I try to burn a CD, missing software or incompatible drive. The drive is an apple brand drive. I am not certain where to find the serial number on it, there are a lot of numbers on it, but it can be provided if someone will tell me where to look. It's not a hardware problem, I can watch DVDs and play CDs, just can't burn. The drive says "CD-RW/DVD-ROM" right on it, and my computer is able to recognize it as such in the system profiler. I am led to believe I am missing a driver(s) that will allow iTunes to burn CDs with the drive.
It'd be great if I could get this on a disc, but if I can just download it from somewhere (willing to pay for it/them!), as long as I can burn it to a disc or download it again if I install a larger HD, that's wonderful. Or, say, I could wait on downloading it until I HAVE upgraded the HD, which I will probably do in the coming year. This would not be as wonderful, but I'm willing to do it.
Please, can somebody help me?

If you can, I'd recommend upgrading to 10.4, as it usually recognizes any 3rd party CDRW/DVD or DVD burner, without the need for Patchburn.
You can check the xlr8yourmac website for reports from Pismo (and other PB) users who have added aftermarket CD/DVD burners to their Pismos, etc.
I too love the Pismo (have had and upgraded at least 10 over the years, some for me and some for family members). The expansion bay was a great idea back in the day. I've found that most if not all aftermarket notebook, a.k.a. "slim" burners fit in the expansion bay. And the Pismo, coupled with Tiger 10.4 (I find 10.4.7 to be outstanding and haven't updated beyond it), is highly usable still today, given that big hard disks and DVD burners and 54g wifi PCMCIA cards (Airport compatible, no drivers needed: e.g. the Motorola WN825G cardbus card) have plummeted in price from a couple years ago. Too bad that compatible RAM is still expensive, as are new Pismo batteries (new, they cost more than many Pismos on eBay!).
As to brands/models, I like the Sony-Nec Optiarc AW-G540A 8x DVD burner (recognized as Master, ID=0 right out of the box, very fast, fairly quiet, priced @ $50-60) because it just works; and the UJ-8xx series DVD burners from Panasonic, which are pretty reliable (and very cheap on ebay if they're older models), because you can swap the faceplate/bezel with the original bezel from the DVD-Rom in your Pismo (if it was a Panasonic model; Apple also used LG drives).
Good luck.

Premiere 9: Incompatible Driver...

Similar Messages

Maybe you are looking for