Premiere actually rendered "Frame not analyzed for stabilization; press analyze" on the actual video?!

When you put the Warp Stabilizer on some footage, it will ask you to analyze the footage so that it can stabilize it.
Some of my clips, apparently, went unanalyzed and when I rendered my video (which took several hours), my rendered footage actually has the "Frame not analyzed for stabilization; press analyze" blue warning in it. The warning rendered as if it were part of the film itself.
Is this supposed to happen? This is truly shocking.
Moreover, I would have expected that the render process would have gone through and analyzed all the footage and applying all the effects before outputting the final product.

Hi LeeHyori,
What you're seeing is the correct behavior but I do understand how this is not desirable.
If you would like to see this changed please add a feature request here
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Best,
Peter Garaway
Adobe
Premiere Pro

Similar Messages

  • My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    You need to connect to iTunes and restore.
    iOS: Not responding or does not turn on
    You may need to put the device into recovery mode, this is covered in the link on this page.
    Did you back up the device?

  • My friend has an apple iphone 4s, He could not make the ID on icloud, becase at the end of ID creation procedure, the message displayed, " the free icloud ID is not eligible for this device"  what is the solution, thanx

    My friend has an apple iphone 4s, He could not make the ID on icloud, becase at the end of ID creation procedure, the message displayed, " the free icloud ID is not eligible for this device"  what is the solution, thanx

    Your friend will have to create his iCloud account on a different iOS device.  His device has already created the maximum number of iCloud accounts and cannot create another one.

  • TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

    This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
    I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

    I did all that HT1925 recommended and it was no help.  My computer still won't recognize my iPhone.  Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

  • My sons Iphone5 is not eligible for content filter according to the website. Can I do something to make it "eligible"?

    My sons Iphone5 is not eligible for content filter according to the website. Can I do something to make it "eligible"?

        We certainly know how important it is to manage content filtering on wireless devices deckhand. I'm happy to advise that the iPhone has built in restriction options. On the device, simply go to Settings > General > Restrictions. Here you can enable restrictions on certain device function. I hope this helps.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • My iphone 4 does not ring for messages when i use the handsfree..

    my iphone 4 does not ring for messages when i use the handsfree..

    iPhone supports A2DP audio streaming. If you have it paired to a handsfree kit that supports this, for example, an in car audio system, and are currently tuned to a source other than the phone, the phone will send the audio for things like text message alerts to the handsfree system, but you will not hear them. This is just the nature of the beast. If you do not intend to use audio streaming from the phone, you may be able to disable this in the in car system. This should not affect Bluetooth calling. There is no option to disable this on the phone itself.

  • Premiere Pro CC 2014 not optimized for iMac 5K graphics card?

    I have the new iMac 5k with the AMD Redeon R9 M295X 4 GB GDDR5 graphics card. In Premiere Pro CC 2014 (updated to the latest version), when I go to "project settings" and select "Mercury Playback Engine GPU Acceleration," I get a pop-up window that reads: "the selected renderer hardware has not been certified." Does this mean that Premiere Pro is not optimized for these video cards? If I still choose to select GPU acceleration, will I see any performance boost?
    Thanks in advance for any responses.

    It means Adobe has not tested the card.
    If you can select the card you are OK.

  • Analyzing for Stabilization prevents screensaver?

    Has anybody encountered this? Whenever iMovie is analyzed a clip or a entire project for stabilization the screensaver will not come on nor will the display sleep. Having iMovie 09 open does not prevent it from happening, only when it is analyzing. The video being analyzed is on an external drive, I don't know if that has anything to do with it.
    Thanks

    It creates a relatively small file in the Event folder.
    For example, I have an Event file that is 24.3 GB. Of this, less than 21MB is for the stabilization files.

  • Browserlab is not working for me, it wont complete the load even though i have high speed internet?

    Subject
    First time use of browser lab not working.
    Problem Description
    Ok, so, I'm working on a tutorial page on CS5.5 and I am at the stage of using browserlab to preview it online. I log in and enter my password then it opens my browser and I click on "start using browserlab now" and a load screed appears. It loads for about a minute and then remains "blank", which is in fact the adobe screen with a language bar at the top right, but NO preview pages? also, if I then go into dreamweaver again the browserlab tab reports an error saying "Timed out, failed to connect to BrowserLab"
    Steps to Recreate
    This issue happens every time, and I have never got it to work. 
    Windows 7 32-bit operating system. 
    I am using the main BrowserLab interface as well as testing via Dreamweaver integration (DW version is version 11.5 build 5315)
    I dont understand what this next statement means? "What is the URL you're testing against?"
    Expected Results
    I thought that browserlab would open my page in multiple browsers on one page so i could see if there are any errors for different browser types.
    Actual Results
    Did not load correctly and gives errors.
    Many thanks in advance
    Marshall de Meillon

    Hi Marshall,
    Thanks for the detailed report. Don't worry about your step #4, you didn't get to that point.
    From what I can tell, you're opening up BrowserLab in your browser first, then trying to do a preview from Dreamweaver, is that correct? I'd like to try a test where you first test BrowserLab in standalone mode and if that works, then try the BrowserLab integration with Dreamweaver. So please try doing the following steps:
    Close Dreamweaver and all of your browser windows.
    Leave DW closed, open a single browser window and go to https://browserlab.adobe.com
    Log in, and request a screenshot by typing in a URL like http://www.yahoo.com and pressing <Enter>
    Does that work for you? Do you get screenshots for that? If not, please describe the steps you followed and what you see
    If so, close your browser window and open Dreamweaver. Do not open your browser to BrowserLab
    In DW, open the webpage you'd like to view in BrowserLab and press the preview button in the BrowserLab panel as shown in your shot
    You may need to log in again, but let me know what happens with that test.
    Mark

  • Tax not calculating for loss of pay on the reduced basic pay

    Hi Experts,
    We have an employee who has LOP for five days and hence the basic pay is reduced. However for tax calculation the system is not considering the reduced basic pay, it is considering the actual basic pay.
    Eg
    Employee X has 5 day Loss Of Pay for the month of May.
    His actual Basic Pay is Rs 10,000
    His Basic pay after considering the 5 day loss of pay is Rs 8,000 for the month May
    For this particulat month system is calculating tax on actual Basic Pay i.e Rs 10,000. However we want the tax to be calculated on the reduced basic pay.
    Please provide with your valuable inputs.
    Thanks in Advance
    Koutilya

    Hi,
    Tax is not calculated on the month salary. It is the annual salary on which tax is computed and deducted.
    Annual salary gets stored in WT /410 (Regular Income) WT /411 (Irregular Income) and /413 (Perks).
    Annual Regular income is computed as under:
    Annual Reg Income = Regular Income Paid till last month + Regular Income for current month + Projected Regular income for balance months in the FY.
    Check the values of these WTs in your case. These must be different in May from the values in April.
    VK

  • Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main  Dell computer and my Iphone. Any ideas?  Duanekot

    Overnight, the taxt body of emails will not display for all messages in the inbox.  Only the From and To and a subject line display.  All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully.  Any ideas?? Duanekot

    See if this helps .... Reset the iPad.
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

  • Connect via RDP option is not enabled for some VM's on the same Hyper-V Host

    Hi. I have many virtual machines on a Hyper-V host being managed via System Center Virtual Machine Manager 2012.  When you right click on a virtual machine - Connect or View - Connect via Console is enabled, but Connect via RDP is not enabled for
    most but not all of the machines.  Is there a setting on the Hyper-V host that I need to modify to enable Connect via RDP for all of my VM's?  All of the virtual machines have the same configuration meaning that Remote Desktop is enabled for all
    of them on the OS itself.

    Hi Debabrata,
    In App Controller the console access is provided by an ActiveX control and this requires the client (web browser) to connect directly to the Hyper-V server. As you note, for this to work over the internet would require the Hyper-V host to be accessible from
    the internet, and this is not a recommended security practice. 
    Publishing App Controller as a Remote App avoids needing to make the Hyper-V host accessible to the internet. I'm not an expert in setting up Remote App and don't have an answer about how to avoid doing 2 lots of authentication. The
    Remote Desktop Services forum is likely to be a better place to ask a question on setting up Remote Apps.
    Let me know what you need help with for the Remote Console in Windows Azure Pack option. There is also a forum for
    Azure Pack and two of our MVPs who do have console connect working have both written articles that describe their experience.
    http://kristiannese.blogspot.com/2014/02/configuring-remote-console-for-windows.html
    http://www.hyper-v.nu/archives/mvaneijk/2014/01/windows-azure-pack-remote-console-with-the-rd-gateway-in-a-dmz/
    Regards,
    Richard
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Accessory not made for iPhone! It in the iPhone dock!?

    My iPhone has a problem when it is put on its dock and ONLY when its put in the dock it occassionaly comes up with the "this accessory is not made for iPhone..." message.
    This has happened 3 times over a period of 7 days- it does not occur everytime the phone is in the dock and it has never occurred any other time.
    I have managed to get it to happen twice tonight but half pushing the phone into the dock BUT I can't get it to happen everytime - it came up about 2 times in 100 attempts over 4 hours to see if I could replicate it.
    I have not restored it as it is so random I am not sure that restoring it will even fix it - although I will if it gets worse.
    I have another iPhone dock I am trying and it has not come up in that dock but again it may not appear for hours or days as its so random!
    There are no other problems with the phone. I don't know what to do!
    Any suggestions? Thanks.

    I was in the shower when I received a call. I turned off the shower, blotted my ear, and tried to keep the phone dry. I got to my headset (corded one that comes with it), and plugged it in to be safe. All of a sudden I start getting the message you're talking about. I also had had the ringer turned off the day before. I have no idea what caused it, or if any of that was something above that started the issue. I wasn't getting the clicking sound when I turned off the keyboard, and that stupid message kept popping up.
    I tried turning off the phone and resetting it, I unplugged and replugged the headphones, and blew the phone's dock connector, earpiece, and headphone jack. I turned ringer mode on and off with the switch. None of this seemed to work.
    Then I plugged the phone in DIRECTLY to the computer, just with the cord and no dock. Be-deep. The sound I loved to hear. Sleeping the phone with the top right button now clicked again, and MOST importantly, I haven't gotten the message in the last 10 minutes!!!!!
    I'd love to know if any of those situations I listed above was something you had done before this occurred. And I'd love to know if it works.

  • Why is the time different on my iphone4 for messages and reminders to the actual time on my phone

    I have had to set the time zone on my phone manually as it is wrong. so now that shows correctly. However when i set a reminder and get messages. They show up as a different time zone altogether. So my reminders are coming through 12 hours too late. How can I fix this? I have tried resetting the time manually and automatically.

    On your iPhone ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Then tap Settings > General > Date & Time
    Switch:  Set Automatically ON
    No data is lost due to a reset.

  • Displays call for only 2 rings then the actual screen goes blank

    I have a 3GS and already had it changed once. When someone calls, the screen shows the caller and then after a couple of rings, the screen goes blank/black. The phone still rings but you cannot then see who is calling and you have to click on the home button. My old iphone 2G did not do this. Does anyone have the same problem and/or know how to solve this?

    Shut down and restart the app...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red to delete the Mail app from this list.
    - Press the home button twice when done.
    - Restart the Mail app

Maybe you are looking for