Premiere adding 15 frames to the end of every clip in export/sequence

Last night I exported an AVCHD 1080p Square Pixel sequence to a H.264 video file. When I checked on it this morning, the export had 15 frames added to the end of every clip in my video. I checked my project in Adobe Premiere Pro CC, and noticed that those extra frames were also added to my sequence. Any clue as to what would cause this?

Can you post a screenshot of your timeline.
Also one zoomed in on a problem area.
Are you using crossdissolves in a 30 fps sequence?

Similar Messages

Frozen frame at the end of every clip

Without transitions, there is a frozen frame at the end of every clip that can be very distracting. Is there a way to disable this? I've been putting transitions in, which works, but I don't want to have to do that.
Thanks,
Elsa

Thank you very much! Sorry it took me a while to get back to you. This ended up working! It ***** that I have to add this extra step, but I'm glad there is a work around. Thanks again for you help.

Media Encoder CC 14 renders with black frame at the end

Hello,
my Media Encoder running on Mac Yosemite makes a black frame at the end of h264 clips...
How can i fix this?
Thanks

I just figured out - it might be a quicktime viewer problem...

Premiere adding repeated frames when overwriting with transitions

Hi,
Having a bit of a problem (software bug?). I work with groups of clips on a timeline with 5 clips for each group (Intro / segment1 / segment2 / segment3 / outtro) and each week we replace 1 or 2 of each segment so we don't have to do a complete re-edit each week (for example one week we may replace segnemt 2 in each group for the new week and keep 1 & 3 intact)
I'm replacing clips on a timeline using an Overwrite Edit while keeping the transitions from the previous clips intact (cross dissolve with center alignment). The new clip is IDENTICAL in length to the previous clip I'm replacing (so "handels" are already there) however Premiere is adding repeated frames to the head of the new clip (so the incoming image freezes up until half way thorugh the transition). One way I found to fix this is using the SLIP tool to drag the new clip to the left and line up the in point of the new clip to where it should be. I'd use this as a fix, however I'm replacing over 300 clips in some instances and it's just not time efficient to slip and tweak each one.
I hope this makes sense.
Anyways, has anyone else encountered this? Is it a bug? Any workarounds?
Thanks,
Phil

I hear ya, unfortunately in our case we actually don't have a choice deciding where each scene begins and ends because the first frame of the next clip is the next frame in the animation sequence (we have a tile wall floating with moving images over so the flow between the two clips needs to be seemless.) We use a cross dissolve where the overlapping frames match each other during the transition, so the 5 segments stitched together look like one consistant flow). We do this so we can swap out different content segments each week so we can quickly update rather than spending hours re-building the entire segment each week. If you've ever seen the FirstLook conclusion in the movie theaters before the movie starts, that's what I do Sounds like Ann's solution will work for us in this case.
Cheers!
Phil

Exporting mp4 adds white frame to the end

Every time I export an mp4 I'm getting an added white frame at the very end of the video. I'm using the render queue and exporting with the windows media setting in the adobe media exporter. I've tried shortening my comp but that doesn't solve the problem. Any suggestions?
thanks

Hi Mylenium,
Thanks for responding. I'm using the standard H.264 export settings from AE. It doesn't occur when using QTs Mp4 settings but the quality that I'm getting from that is pretty bad which is why I started using the H.264 exporter in AE. The other thing I liked about it was the file size to quality ratio. I also don't think the mp4s will stream in flash, which is what the final goal is with the files. I have tried changing the settings so that my duration is an even time like 23:00 seconds.
I see this issue in various places on the internet and I'm not sure what is causing it.
Thanks again.

Clips won't automatically join the end of other clips in Adobe Premiere CS6

I don't really know what happened. Before, there used to be some line or strip that would come down the end of a clip when I try to combine another video clip to it. It would automatically combine the two clips. Now it won't do that. I don't recall changing any settings. Please help!

I’m not sure what application you’re referring to but whatever it is
(Premiere perhaps?) there are forums for every application. Please post
there for help.

Compressor white frame at the end of WMP

I want to use compressor and flipformac to produce my windows media files. I have 50 clips to move so I wanted to take advantage of the automation.
Every clip it finishes as a wmp9 using the flipForMac quicktime plugin has a white frame at the end of it. Any way to get rid of that?
I downgraded my flipformac to the 1.0.2 from the 2.0 that is there current release because of a known bug that causes floating green chroma crap to appear on the wmp doc. I also tried using Sorrenson Squeeze to batch, but Sorrenson can't compress 720p codec footage that is the DVCPRO HD codec. (again, known bug they are working on). I tried downconverting the HD footage to SD and having compressor do it and still .... white frame. So then I tried cleaner... it just crashes... I hate cleaner.
sorry for the rant... can anyone help.

Is there a chance your source footage has the same white frame before you encode it? I've never seen this problem.
As far as flip4mac, there is a work around in the current version to avoid the green monster. With a Two Pass VBR Constrained, set your Peak Bit Rate to 1.5x. This makes your encode closer to a CBR, but eliminates the compression artifacts. Also in the advanced settings, a shorter Key Frame frequency will improve overall quality.
Sorry I'm not more help with the white frame. What version of Compressor are you using? I've done close to 100 encodes in the last month and haven't encountered this. What are your source files? Quicktime out of FCP? Reference files?

I just purchased adobe premiere elements 12 and at the end of the installation it mentioned to go to apple . com and get quick time?

I just purchased adobe premiere elements 12 and at the end of the installation it mentioned to go to apple . com and get quick time? I'm interested in doing time lapse video. Not sure as what to do... Any and All help would be Greatly Appreciated, Thanks, in advance.

EuGene
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to the 12.1 Update? If not, please do so using an opened project's Help Menu/Update.
The latest version of QuickTime is a requirement for Premiere Elements. Among other things, without it you will not have QuickTime export presets when you get to the Publish+Share/Computer/QuickTime exports. So, please download and install latest version of QuickTime to computer with Premiere Elements 12/12.1. QuickTime like Premiere Elements requires that it be run with you as Administrator. Is your User Account one with Administrative Privileges?
Apple - QuickTime - Download
Some reading material if your interest is in Premiere Elements and Time Lapse video
http://www.atr935.blogspot.com/2013/07/pe-time-lapse-video-basics.html
ATR Premiere Elements Troubleshooting: PE: Numbered Stills in Time Lapse and Other Animations
Please update us on your progress when you get a chance. Any questions or need clarification, please do not
hesitate to ask.
ATR

My time Frame indicator stops one frame before the end...?

Basically what the header says, which means every rendering I do is putting a black frame at the end of everything, so, for example, doing a Vine loop vid effect is proving impossible, because of the black frame it puts at the end of everything.
Any help please for this novice, would be greatly appreciated, its driving me crazy, hope it/s something simple.
Cheers Simon.

There is nothing wrong. AE operates on genuine time and a discrete frame is sampled at its temporal entry point. and nothing stops you from creating perfect loops, you just need to understand this little thing.
Mylenium

I am using my Description as the caption on Slideshow. I ticked the "Show Title Slide" button and iPhoto physically copied the description on the first slide onto the end of every other description. I can find no way of removing them other than by hand.

I am using my Description as the caption on Slideshow. I ticked the "Show Title Slide" button and iPhoto physically copied the description on the first slide onto the end of every other description. I can find no way of removing them other than by hand. Unticking the "show title slide" did not reverse the situation back to my required state. Any ideas why it might have happened or how it might br resolved? Regards, Marshfrog1

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Freeze frame in the middle of a clip?

For an instructional DVD, I need to be able to freeze a frame in the middle of a clip, without the sound (as I'll put up some text messages).
I've ended up making copies of the clip, and using the hold condition, and trying to line them all up by hand, but this doesn't seem like an ideal way to do this.
Also, is there an easy way to turn off the sound for the 'hold' part of the end of a clip? Would be nice if there were a boolean I'd overlooked, but I guess I'll have to open my "Spencer's" Motion 4 book, and try to remember how audio keyframing works?

As mentioned by others, it's best to perform this effect in FCP. Bring your Motion project back into FCP and place the playhead where you want to freeze the frame. Press shift/n to create a still image in the Viewer. Blade the clip at the playhead and perform an insert edit to add the freeze frame. Cutting out the audio in FCP is easy as well and there's several ways to go about it. I would simply blade the audio at the freezing point and drag the remainder of the audio to snap to the point where the motion starts up again, depending on the type of audio effect you are looking for.
Although there aren't any behaviors in Motion that affect audio in that fashion (except for Audio fade in/out behavior) you can still edit the audio somewhat in Motion. Just go to the Audio Editor Tab and adjust the levels there or press ⌘6 to reveal the Audio Tab then right click the audio file to duplicate the audio file, set an out point for the first audio clip in the Audio Editor Tab where you want it to freeze, note the frame, and on the duplicated audio file set the in point at the same frame that was set for the first audio clips out point, then place the duplicated audio clip were you'd like the audio to resume.

Is it possible to export to PDF without a Return character at the end of every line?

I am the author of a book whose first edition has been typeset and extensively amended in InDesign. I now need to rewrite the first edition to produce a second edition.
When I copy-and-paste from the PDF with which the publisher has supplied me into MS Word, I get a Return character at the end of every line, which means that text doesn’t automatically wrap and sentences are fragmented so that I get spurious grammar errors.
I know that not all PDF files have a Return at the end of every line. Is it possible to restrict Returns to the end of paragraphs when exporting from InDesign to PDF? If so, what should the publisher be asking the typesetter to do?

Thanks for your lightning-swift and helpful replies, Mike & Ellis.
I don't have InDesign myself, so I know hardly anything about how it's used. I'm just trying to research what an internationally-known publisher should already know how to do, but apparently doesn't!
Following your suggestion, Mike, I have downloaded the trial version of Acrobat and exported the PDF to a Word file. This has been moderately successful as there are far fewer spurious Return characters, just a few that I suspect may be hangovers from the typesetter having introduced soft returns in ID.
As you've suggested Peter and Ellis, I'll suggest that the publisher asks the typesettter to export from ID to RTF and Text to see if that's even better.
Message was edited 15:24 GMT by: AlanS5100

I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?

I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?

Yes I know what you mean about it cluttering the thread and for personal emails it is better without the signature. However this relates to sending business emails from an iPhone so I need the signature present on every email.
I can't find anything in Settings so I was hoping someone may have some knowledge/information/experience regarding this problem.

How do I have a totalizer reset at the end of every month?

We are using Lookout 5.1 in an application that is receiving a Modbus input giving us a totalizer value. We need to have this value reset to zero at the end of every month. Also want the monthly total to be sent to an excell spread sheet. All help is much appreciated.

I think this NI Post will help you out....
Regards

How do I get reverb to carry on at the end of a clip.

Dear FCP Community
When applying the reverb filter in FCP, I would like to have the reverberation to continue for a few seconds at the end of the clips normal length. I can't work out how to do it .... is it even possible!
With thanks, Johnny

You need to have extra material at the end of your clip called "Handles".
Then as soon as the picture section has ended, increase the amount of "Wet" effected mix in relation to the "Dry" unaffected mix.
So lets say your part with picture is 5 seconds long, you need 7 seconds of audio -2 seconds more at the end. From the 5th to 6th second you increase the ratio of wet to dry mix and from the sixth to seventh second, you fade the audio out, letting the next clip take over. Make sense?
The numbers here are just for illustration. Yours may differ.

Premiere adding 15 frames to the end of every clip in export/sequence

Similar Messages

Maybe you are looking for