Premiere Audio Filter Issues

So I've finished my project, applied audio filters (Denoiser) to get rid of the hissing sound. Worked flawlessly. Sounds great in my project, but once exported the hissing returns at the begining of each new audio clip. The sound gets perfect again after a second or two but reverts to the pre-filter sound each time a new clip comes in.
So is there a fade in-out for the audio filter? I can't find one (and why would one want one). Doesn't matter how I export, to any file type, always the same, brief original audio which gently fades back to the perfect-filtered audio.
Again, sounds perfect all the way through in my project, but not after rendering. Any ideas?

This is a known issue with certain audio filters in PP. The recommended solution is to process those audio files in Audition instead.
And do file a bug report.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

Audio Sync issues Premiere CC and AJA T-AP

I need to get the audio sync issues resolved in Premiere. Using CC with an AJA T-tap. I downloaded and installed latest firmware and drivers, and plug-ins. Audio is playing back through Mac Pro line output. When the T-tap is turned off the audio plays in sync with the video on the computer screen. When I turn on T-tap and give it a 200 ms offset, it plays back in sync with my external monitor, but the computer screen is out of sync. If I skip around in the sequence quickly and press the playback, sometimes the monitor is out of sync. I need my audio and video to be in sync on all screens all the time. How do I resolve this issue?
Thanks, Scott

Hi team!
cc: petergaraway
Wondering if anyone has any updates on the Premiere CC v AJA T-Tap situation?
I just bought an AJA to go with our new trash can iMac, which has been beasted out so it shouldn't have any performance issues. I have two thunderbolt displays for the edit and a Samsung LED TV on the wall for client monitoring. There is a 10m HDMI cable running to get to the TV, through walls and ceiling, which I just replaced to a cable with a booster in the middle because I thought that distance might be the first cause of the lag.
I guesstimate we are anywhere between 6-12 frames out at times. Also, the vision seems to be buffering, and thus at times jolts on the screen as it tries to catch up (or back) to the audio.
Audio is coming out through the Headphones jack on the mac to a small Behringer mixer, where I have monitor speakers for the edit and then wall speakers for the client. So I have been keeping the Audio output to the Adobe Desktop Audio. If I select AJA T-Tap it sends the audio straight to the TV, even despite going back into the system settings.
In Preferences > Playback, the AJA settings are to Match Sequence and Minimum Buffer. Playing with the m/s frame offsets doesn't seem to make any progress on the issue. And infact if I push it to 500m/s it only worsens the buffering problem I described above.
I went into the AJA control panel and have made sure everything is set to 1080p25 as our timelines will invariably always be 25fps (Australia).
But right now I am pretty stuck, and think our slight sync issue was better before I introduced the AJA T-Tap to our system, when we ran the HDMI straight out of the back of the Mac. Only problem now is I put the HDMI back there and I don't get a signal to the tv!
Would love any other thoughts or suggestions here.
Mike.

Audio Filter missing: Internal Volume Stereo - corrupt project?

Hi,
I am getting this error when I open my project. In addition, no media will play in the project either in the sequence window or the source window.
It all appears and will scrub (with no audio), but will not play.
I dug around a bit and I found that there is a known bug with audio from XML's and that is what I am using (convinced my client to migrate from FCP to Premiere - please don't tell me I made a mistake).
Everything worked brilliantly for a week, including the addition of audio filters, and then all of a sudden - bang. No more.
I have painstakingly deleted every audio filter and I am still getting this error. I have also tried a re-install.
Another oddity is that when I try to quit Premiere, it will not quit all the way without a force quit!
I'm running CC 2014 on a brand new mac pro.
Desperate,
dw

Steve and Bill,
I follow your advice, but it did not solve the problem. It is true that problems began when I used ZOOM recorder at 98kHz/24 bit in my current project (I already changed ZOOM mode to 48kHz/16 bit), but could this be just a coincidence?
In the meantime I checked the rest of my 16 projects (.prel), which were fine before. To my surprise I found that although all of them were made using EXACTLY the same method, some of them are still OK, but most I can not Playback. The messages appearing are of three types:
1. "Audio Filter missing: Internal Balance".
2. "Audio Filter missing: Internal Volume Stereo".
3. "This type of file is not supported or required codec is not installed".
In one case, when I opened a project the first time, the message was "This type of file is not supported or required codec is not installed", but when I opened it second time it said " Audio Filter missing:Internal Volume Stereo". It seems to be random.
Some projects can be opened, but when I try to Playback there is no sound.
I am completly lost. Please help.
Andrew

Audio Filter missing . . .

I have experienced a number of crashes (iMac OS 10.75) in my Premiere Pro project + the warning "Audio Filter missing: Internal Volume Mono" How do I resolve this? It seems to be a 'project' problem.
Thanks for your help.
Nola
Message was edited by: Nola Schiff

I wish I could supply some help; I am having the same problem (newest version of Premiere Pro CC, just reinstalled in hopes of solving this problem, on a Macbook Pro i7 running 10.8.4 with 16GB RAM. It is rendering my project unusable. Help anyone?

Audio Filter missing: Internal Volume Mono

All of a sudden this error message started popping up
Audio Filter missing: 4:1635083896 1278365011 1802721110 Audio Filter missing: Internal Volume Mono
Also now my timeline is not working, some tracks are missing volume envelopes and when I scroll up and down it's all messed up and I can't do anything.
What's happening?
I tried re-installing the latest update CC 2014.1 but no go...
Help!!

OH man, Im also having loads of other audio issues with this update. Clicks, pops, audio often mutes on it's own. No audio comes through and there's screeching huge noise...ng
Really disappointed with this! Im paying good money for the CC and today alone Ive spent 4 hours trying to figure out these massive issues.
Im using multiband compressor and EQ and the instant I add those to the timeline the troubles begin.

Quicktime audio sync issues

Hello,
I have quicktime version 10 (128). I can't get anything to play in it without there being severe audio sync issues every time. I can't figure out why. Can someone please help me fix this problem?
When I export my movies from imovie to quicktime it will play in quicktime, properly and without sync issues, for a really short period of time - seconds. But after that, the audio no longer matches the video. I know it's an issue in QT because when I upload the video to YouTube there are no audio sync issues whatsoever.
Help?
Thank you so much,
YahYah

I am dissapointed to see that no one has addressed this issue. I have similar issues.
The MP4's play perfectly in the quicktime player but in Premiere they are off by varying degrees sometimes up to a minute even. I had similar problems in the past with files from the same producer. However last time I was able to change the extension before importing and then sync them up manually on the timeline. It worked everytime. This time however when I change the extension Premiere brings it in as an audio only file.

Trouble exporting 11-min film as XML because of audio translation issue

Hi, I am trying to export a short film XML file of approximately 11 minutes for a sound engineer and it's coming up with a ton of audio translation issues.
Can I attach the report and someone help me? Most of the issues are audio tracks from ADR but I recorded them with the same H4Zoom I used for the original, and some were the original production audio to which I applied the DeNoiser effect. They're all stereo files with the exception of a few mp3s which were special effect sounds. Why are they not being translated? What can I do to get this into an .xml?? It looks like somewhere between 100-150 audio files were not translated.

are you using merged clips? premiere merged clip XML issue
if the sound engineer will take another format, premiere can export OMF or if you have audition you can open the OMF in audition and export it as a fcp xml.

Audio Sync Issue When Exporting to Quicktime

Currently using Premiere Pro CS3 3.2 and Quicktime 7.5.5
When I export to a quicktime .mov, my audio is a few frames out of sync. I've tried downgrading to older versions of quicktime with no success. Everything is completely in sync inside Premiere. If I import my rendered out-of-sync .mov back into Premiere, it magically syncs up fine again. It's the weirdest thing.
Help!

Scott:
There is a workaround.
I never really found a solid cause/solution, but if you're noticing that you have a couple of white frames at the end of your Quicktime exports, then you're probably suffering the same problem I have. Tech people I have checked with have suggested that the problem may be related to the use of .mp3 sound files (as opposed to .wav) in the Premiere project, but after removing them and replacing them with .wav's the problem persisted.
I am not technical enough to figure out exactly what's causing the problem, but I think it must have something to do with the Adobe Media Encoder (at least how it works on my computer). From what I've read on the subject, the Media Encoder is Premiere's Achilles's Heel.
Changing versions of Quicktime did nothing. Others trying to solve this problem have tried exporting their files with every conceivable variation of options and settings in the Adobe Media Encoder with no positive result.
I'm not the only one with this issue, but searches of the Internet show it to be relatively rare, so it's probably some weird glitch somewhere deep in my system. It's not widely-reported enough for anyone to care about addressing this bug. Of the few people that I've found suffering from this anomaly, none have found a fix.
But the good news is that I have found a workaround that accomplishes getting a quicktime file out properly that does work for me. I avoid the Adobe Media Encoder completely.
Step 1: Go to File > Export > Movie, and under Settings > General choose QuickTime, under Video > Compressor choose H.264, then Uncompressed Audio. I have not experimented with other settings, but believe that most of them will do just fine.
If you examine the quicktime file you've just exported, you'll see it works just swell; i.e. no white frames at the end of the movie and the sound syncs up perfectly. Okay, sounds great---but there's no way to limit the data rate using this method, which means we're stuck with a ridiculously large file.
The solution is to load the Quicktime file that you've just exported into Quicktime Pro, and now export it using data rate compression / sound compression options to suit your tastes. Bingo!
The other workaround that I have heard from some is to export your movie (again, avoiding the Adobe Media Encoder, instead using File > Export > Movie) as an Uncompressed AVI, and then compress with QT pro as before. This method didn't work for me, something about not having the proper codec on my system to read the AVI file that was exported, which makes absolutely zero sense but I couldn't find the right codec anywhere, even after identifying it with some super-duper codec identification utility. Go figure!
So, you'll have to get QT Pro ($30 I think) to use this workaround, but it does work, and that's what counts. I have no idea if there's a QT Pro clone or similar program available out there. Compression/decompression and all that jazz is way beyond me and I'm just happy to be able to get my file finally out there in working condition.
The only other bit of information I might share with you is that I tried searching the Internet at great length to try and solve this issue, but on the rare occasion I did find someone suffering this problem they were as confounded and frustrated as I was, and no one had a real solution. I continued to search with different search terms and tripped over the clues to this solution when searching for "white frame problem" in relation to Premiere. I even believe that if you search the Abobe forums you may find some posts about it, so if you're inclined to learn more about it, I suggest concentrating your searches with terms that refer to the white frame problem/issue, instead of the terms I used for so long, such as "Premiere Audio Sync Quicktime" and the endless permutations thereof.
But I'll bet this workaround works for you. Let me know, and if you'd like me to try it on one of your exports on my computer I'd be happy to give it a go.
I have often wondered if upgrading to CS4 would solve this problem. Are you using CS3 like me? If I could be sure CS4 made this issue vanish I would jump on it, but there just isn't enough information out there to know for sure. I'm inclined to think not.
Please do let me know if this solution works for you, or if you dig up any new information.
Thanks!

Filter Issues in P6.2.1

I am facing filter issues in P6.2.1. I used the customized filter for "Planned but Not Started". Below shown were the combination i used to create the filter. but when i run the filter no activities were shown under WBS, i mean empty WBS
1. Early Start - within a range of - PS - DD
Activity Status - Not Started.
2. Early Start - less than or equal to - DD
Activity Status - Not Started.

Hi,
My feeling is that perhaps you don't have any task that is late.
If not, please try following filter:
Start is less than or equals to DD
Activity staus not started yet
I hope it helps.
Regards,
Younus

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Audio synch issues in QT

My project displays fine in PE8. No audio synch issues in the preview. After outputting the project to a quicktime movie withe LAN setting the audio becomes seems to run faster than the video, becoming more and more out of synch as the movie plays. Any ideas what might cause such an issue?

The Stream info in MPEG streamclip for files from both cameras gives me this info:
Bitrate: 30.31 Mpbs
Video Tracks:
DV/DVCPRO - NTSC, 720x480, 16:9, 29.9699999999999 fps, 28.77 Mbps
Audio Tracks:
16-Bit Little Endian mono, 48 khz, 768 kbps
I don't know if this helps.

What kind of audio filter would i use.

i need an audio filter that will bring out a distant clapping noise thats you cant even hear during playback. i have raised the dB as high as possible. is there a way to get it heard at all?

Just be aware, that if the audio is very slight and you raise the level .. you will also raise the levels of any surrounding room noise, etc ... so you will get a lot of hiss and maybe even echo. You can also double up the clip to increase the volume but I doubt you would be left with anything useful
Been there, done that, cursed the cameraman

Essbase Security Filter issue.

Hi,
Its regarding the security filter issue.
The major problem is whosoever user is provisioned under that security filter, if the user is trying to connect to Application using Excel Addin / Smartview, it crashes the essbase server [Network Error [10061], timed out error)]
When we figured out because of this filter essbase server is crashing, we tried to edit the filter. sometimes if we click on edit, it crashes the server or sometimes we can see some junk characters in the filter.
We have applied the security on Entities dimension and problematic filter is ASP.
Now the hirerachy is like this.
Entities dimesnsion and then ASP member and under ASP we have our several members.
Filter is like this:
Write : @Idescendants("ASP")
It was working fine for almost 15 days.
Now if i edit the filter, i can see like this:
Write : @Idescendants("ASP")
Metaread:@Idescendants("*&^%?)
Junk characters are coming in and no idea from where they are coming.
I can't delete the filter also, again it crashes the essbase server.
As a workaround i have created a temp filter and dome the assignation for this group, according to that.
Everything is working fine.
I just wanted to know, has anybody faced such kind of problem earlier.
What cud be the root cause for this.
How could I delete the filter.
I have also get messages like security file is corrupted (we have restored it from old backup) but really worried about security file as we are moving the whole thing to production server this weekend.
Please advise me on this, Please help me. Any help would be highly appreciated.
I am really in trouble.
Thanks,
Pankaj Mehta.

Try to edit the filter from MaxL command line using
alter filter sample.basic.filt7 add write on '@IDescendants("ASP")';
here sample=application
basic=database
filt7=filtername
have good luck

Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue

Environment: Oracle APEX 4.0 - Interactive Report - Table Column header Filter Issue
We have developed an interactive report using Oracle APEX 4.0, which contains a record count of around 3,000 Rows. All the rows values are unique in nature. When we try to filter the same with the help of column header filter option available in the interactive report,We get only 1000 records.
Could some one help us, why this behaviour under APEX Table Column Header Filter as if it does not display beyond 1000 distinct values.
Is there a way or workaround on how to get all the records in the column header filter?
Thanks in advance.
Krish

Hi
Thanks for the advice and this issue has been moved to the below URL
Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue Posted: No
Krish

Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue Posted: No

Environment: Oracle APEX 4.0 - Interactive Report - Table Column header Filter Issue
We have developed an interactive report using Oracle APEX 4.0, which contains a record count of around 3,000 Rows. All the rows values are unique in nature. When we try to filter the same with the help of column header filter option available in the interactive report,We get only 1000 records.
Could some one help us, why this behaviour under APEX Table Column Header Filter as if it does not display beyond 1000 distinct values.
Is there a way or workaround on how to get all the records in the column header filter?
Thanks in advance.
Krish

Krish,
Interactive report has hard coded limit to display 1000 rows of column filter LOV for performance. Unfortunately, the limit cannot be changed. The workaround is to define a Column Filter LOV for the column instead of using "Default Based on Column Type".
Regards,
Christina

Premiere Audio Filter Issues

Similar Messages

Maybe you are looking for