Premiere audio issue
Hi I wanted to open a final cut xml in premiere pro and so I mananged to do so but when I want to change my audio levels on the timeline I noticed my audio is on two tracks left and right but the levels change separately. How do I change left and right together? I looked at tutorials and it seems like the left and right are both usually on one track only in premiere unlike final cut. Would that be correct? If so what is the solution to this? Can I merge my stereo tracks into one? Im confused.
Since you are converting an FCP project and the audio clips
are already in the timeline this method will not work.
But, if you re-map your audio channels in a Premiere project
before you add the clips to a timeline, here is your solution:
Mapping source and output audio channels
It's usually a good idea to finish a project using the sotfware you started with.
Similar Messages
-
XDCAM audio issues in Premiere Pro CC
We run 4 New Mac Pro Towers at my shop with Adobe Creative Cloud, and we're editing on Premiere Pro CC. We were a Final Cut 7 shop until we were forced to choose between PP or FCX. I've recently been experiencing audio issues when ingesting XDCAM footage from my Sony EX3 Camera. While the video looks great when ingested into either XDCAM Browser, or when I drop the BPAV file into our external drive and bring it into PPCC, the audio becomes noisy and unusable.; while this same audio sounds excellent on all my other machines. I've uninstalled both the XDCAM Browser and Premiere software and reinstalled them, but have not had any luck so far. Meantime, none of my other machines are experiencing this issue. Any assistance would be much appreciated.
Thanks.One way, assuming you are working in mono, pan A1 center and A2 right, this will give ambience to left and ambience and narration to right. If you are mixing and you don't want the ambience only track to change in level you will need to use subgroups but this will get more involved.
-
We have been testing Premiere CS6 on our first job for the last week. However, we are running into some major audio issues:
1. When clip is loaded into the source viewer, and you jump to through the cilp, the audio lags behind until you stop and wait a few seconds for the audio to catch up. This is a major hinderance when trying to edit quickly with clients in session. This also happens on the timeline when jumping around. These problems never occured in Avid or FCP running the same media.
2. With no rhyme or reason, the audio (from source and timeline) sometimes just doesnt play. The meteres will be moving and the video will play, but the audio wont be coming out. Sometimes you hear a noise as if someone was playing with the audio cables. Also, sometimes the meters dont even move, to suggest there is no audio again video is playing, when infact there is.
These problems have occured accros multiple machines, with media running from both our server, and local hard drives. Our facility runs a NAS that pushes 110/MB/s over ethernet from a 16TB RAID6 (that is SAS connected to the server). One machine is running OSX 10.8, with Black Magic Intensity Pro, 20GB Ram, NVidia Quadro 4000. Another is running OSX 10.8, with AJA IO Express, 16GB Ram, NVidia 4000. and the last is running 10.6.8 with Black Magic Intesnsity Pro, 12GB ram, and NVidia GTX something or other (unsupported card).
Has anyone else gotten these issues? Like i said, i have tested the media from the server and from the local hard drives. We are pushing Apple Pro Res HQ, have also tested Pro Res LT, Pro Res 444 and Canon H.264.For me it wasn't a RAM issue, I had more than enough to process the audio I had in my project. This quote from a Creative Cow post worked for me.
"Try deleting your .cfa files for the media in question, and then don't mess with the project until they are done re-conforming."
Here's the original post:
http://forums.creativecow.net/thread/3/926011
I don't know how to figure out which .cfa files are associated to specific media files, so I just went to where they were cached and deleted all of them. Open your project again and you'll see a little yellow bar in the lower left-hand corner of the Timeline window showing that it's re-conforming your media. Don't even think of touching the computer while it's doing this... I was so paranoid that I didn't do anything else (check e-mail, open a web browser, work on a Word doc, etc.) until Premiere was totally finished. After that my audio played fine for the rest of the project.
One thing that's tricky and took me a while to figure out is that if you're using multiple drives, you have to be careful to make sure you're getting ALL of the .cfa files. If you've set the project to cache your files on a external drive, and then open a project on a different drive without having that external connected, Premiere will set the cache folder to its default location (usually on your host computer's main hard drive). I didn't realize this, and had the audio drop-out issue, so I deleted the .cfa files but the drop-out didn't go away. I found out that Premiere had reset my media cache folder, and had cached the corrupted .cfa files on my main hard drive. Once I deleted them there and let the computer re-conform, the audio played well again.
Hope this helps, let me know if you have any questions. -
Premiere Elements 9 audio issue
Hi, i have an audio issue with Premiere Elements 9.
I just purchased a Dazzle DVC 100. I've captured Video/Audio through Pinnacle Studio no problems.
But when I try to capture in PE9 I only get Video. I have changed every setting i could find under the
audio preferences menus, tried every combination i could but still no audio. Am i missing something?
Thanks for any help forwarded!
These are the settings i tried.
edit - project settings - playback settings - I've clicked both Desktop Audio/External Device Audio
edit - preference - audio hardware - Default Device - Premiere Elements WDM Sound
ASIO Settings - Input - Realtek Digital Input (selected)
- Output - Speakers (Realtek High Definition Audio) (selected)
- Realtek Digital Output (Realtek High Definition Audio) (selected)
Tried the Default Device: Asio4All v2 setting
This comes up with 2 options Realtek High Def Audio and Dazzle DVC100 Audio Device
I have selected both these still no audio.
I'm stumped.Unfortunately the Dazzle is one of those low-end capture units that are pretty much made to work with the video editor that comes with them. Even converting the video won't make it more compatible with Premiere Elements.
As I explain in my books as well as in the FAQs to the right of this forum, the best devices for capturing video for editing your PC are called DV bridges. The best value is the ADS Pyro AV Link, available for about $100 online.
http://forums.adobe.com/thread/431853?tstart=0
The video it captures load right into Premiere Elements and edit beautifully! -
Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!
After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
Neither will install.
Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
My only issues are audio.
Here they are:
1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
In Windows 7 the mic part of the trrs headset does not work.
3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
I need these audio aspects to work properly though!
I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
It doesn't. This has been a nightmare of problems.
Is Apple going to step up to the plate and make good on their promises?
Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
If you are an Apple tech person or an Apple user that can help on these issues, please do!
Thanks, Dr. Duke
An American profesor in Europe.
PS I will post this under Imac windows 7 updates without a reinstall and under
imac Sound issues.On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
Here is my last two cents in to the inquiry.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all! -
SoftPhone over VPN audio issue
Having a "one-way" audio issue when IPC connects over VPN to any Main Office IP Phones (7960). Remote IPC (softphone) shows "0 Received" Packets, but the IP Phone shows them as being sent.
This does NOT happen if IPC contacts another IPC on a PC at Main Site, or any kind of phone at the other branch offices.
Have looked at all of the audio settings on the VPN IPC unit, they are correct.
Any ideas?Try to sniff the Ethernet traffic during call setup at the CallManager. When Callmanager sends Call Control messages to remote party, it could send wrong IP address or UDP port as an RTP parameters.
Another components could block the traffic are firewalls. How do you have your VPN tunnel built? Do you use Cisco VPN Client? What terminates your VPN traffic at the central location? PIX, VPN3000 or Router? Traffic may go one way without a change, and some protocol FixUp may be triggered for this traffic on the way back. If you have access to firewall logs, check if you have any traffic dropped.
Good luck,
Mike
http://www.headsetadapter.com -
Logic 9.1.8 & Mainstage 2 - crashing frequently/audio issues
I have just uprgraded to this set up (though using the same sound card as I did on my Mac Book with Logic 8 & Snow Leopard prevously) - in order to avoid overloading which was happening on my previousl set up.. only to find that this new system seems very buggy - crashes frequently on Logic (Sudden Motion Sensor error - have disabled that now) and Main Stage freezes. Then a wierd echoey sound can happen - whereby any audio is echoed back from DAW, in Logic AND Mainstage.
I have down loaded two plug-ins/VST's since starting to use this new set up - an XILS Lab L.E. verision and a Crystal synth. I've downloaded the up to date Duet drivers from Apogee. (I have an Duet 1.5 that I used with my old set).
Have looked at the Console system log to try and understand what might be happening - it is FULL of text on occasions when Logic crashes - I am not tech savvy enough to unpick it though.
If anyone has any suggestions to help I would be grateful, thanks.
I do wonder if it is a Core audio issue though - given the echoiing that seems to occur...I have just uprgraded to this set up (though using the same sound card as I did on my Mac Book with Logic 8 & Snow Leopard prevously) - in order to avoid overloading which was happening on my previousl set up.. only to find that this new system seems very buggy - crashes frequently on Logic (Sudden Motion Sensor error - have disabled that now) and Main Stage freezes. Then a wierd echoey sound can happen - whereby any audio is echoed back from DAW, in Logic AND Mainstage.
I have down loaded two plug-ins/VST's since starting to use this new set up - an XILS Lab L.E. verision and a Crystal synth. I've downloaded the up to date Duet drivers from Apogee. (I have an Duet 1.5 that I used with my old set).
Have looked at the Console system log to try and understand what might be happening - it is FULL of text on occasions when Logic crashes - I am not tech savvy enough to unpick it though.
If anyone has any suggestions to help I would be grateful, thanks.
I do wonder if it is a Core audio issue though - given the echoiing that seems to occur... -
My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie -
iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped! -
My iPhone 5 is suddenly having audio issues through the headphone jack.
So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!Do the new iMacs have digital audio out through the headphone jack?
Yes.
http://support.apple.com/kb/SP576 -
HP Slate 21 audio issue after KitKat update and reset
I have upgraded my HP Slate 21 from JB to KK. Now the sound quality is very bad!
I came directly from xxx.11 kernel and made factory reset but didn't get a good result. Please how can I fix this tremendous issue?Hey @PauloTxR ,
Welcome to the HP forums.
I understand you're experiencing issues with sound quality on your Slate 21 PC.
Please review the following thread: HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity.
This fix will resolve audio issues of a software nature resulting in the KitKat update. If your issue persists after applying the specific update mentioned in this thread and have done a factory reset, the issue is likely hardware related and not the result of the KitKat update.
If you have done the above and continue to have problems please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
STILL have MBP audio issues after Bootcamp 3.1
I have a mid-2009 MBP 13" with Snow Leopard, running 32-bit XP Professional with SP3. I just updated to Bootcamp 3.1 after dealing with low audio, robo-voice from the internal microphone, and spooky red light/trackpad nonsense for months. While 3.1 fixed the red light and the trackpad, my audio issues still remain; I get very poor volume on the Windows side and my voice is still distorted, slow and generally crappy when I use the built-in microphone in the microphone test. The mic doesn't work at all in Steam, which is the whole reason I want it. Was 3.1 supposed to fix these audio issues? It doesn't explicitly say so on the download page, but it seems like it's been quite effective for other people, so if it is supposed to fix the audio I suppose I'm going down to the Apple Store.
If 3.1 wasn't a magic bullet, can anyone suggest a fix? I'm pretty fed up by now with this issue. I tried reinstalling the drivers after extracting them from the BC 2.2 update (found that process on these forums), and it did nothing. The link to the New Jersey school's site (another suggestion from the forums) no longer works for whatever reason.
Thanks!Use Driver Sweeper and the tips on how to use and troubleshoot
http://www.guru3d.com/category/driversweeper/
You may also want to use Windows Installer Cleanup as I mentioned.
Also CCleaner can help.
MSCONFIG.exe can lead you to the services and startup items being loaded
Programs control panel of course to uninstall the program
Device Manager to rollback; or uninstall and manage device drivers
Apple installs a number of drivers, services, startupitems so you really have to get familiar with the OS and where/how to manage things.
Windows 7 supports RESTORE POINTS. Use 'em! and set one before just in case (any good installer or update should create a new one but good to have your own), and make sure there is 10-30GB of space for restore points.
System control panel advanced protection -> configure your boot volume settings -
Audio Issues - Sound stops on youtube vid after a few seconds. Please Help?
What's been happening is weird audio issues, especially youtube related though not only (other web video content has been messed up, but mostly youtube). Right now I am using headphones (1/8" or 3.5mm) through the back of the computer and when I turn on the computer, at first I can hear sound from videos. When I open the speaker icon mixer window in the bottom right, I see green bar moving with the sound on the "speakers" mixer and "Adobe Flash Player" mixer simultaneously.
Then after a few minutes or after having a few tabs open, all of a sudden the audio stops. Oddly enough, usually the video keeps going even thought the audio has stopped. I verified this wasn't a hardware issue with my headphones by opening the Speaker Icon Mixer window, and acutally was watching it at the moment the sound stopped and saw the green bar disappear exactly when the sound stopped.
If I restart the computer, or firefox only sometimes (mostly need to restart cpu though) then videos will play again with sound. Once the sound stops however, if I open a new youtube video in another window, it will sometimes cause an "An error occured. Please try again later" crash.
I'm at a loss of what to do.
Running latest version of Firefox (26.0) and Adobe Flash (11,9,900,170 installed). Windows 7 64 bit system, Intel Core I7 Processor.
I have tried many things include "reset firefox", clear cache, changing to an earlier version of Flash (11.3). Tried to update sound cards. Even tried to restore computer to an earlier setting ( I only went two days ago, could go farther back I suppose).When I reverted back, the problem went away for a few hours but then came right back.
I scanned pc with ESET online antivirus, no viruses, Malewarebytes Pro, no issues. Cleaned with CC cleaner. Plenty of hard drive space (using an SSD boot drive btw).
I am not very knowledable about plugins or "addons" or extenstions. Nor do I know if it has anything do "Firefox Options -> applications" (gives content type and then option...essentially a bunch of sound file types and then which plugin plays it). I can give my list of all this out if necessary but there are quite a few and I dont know how to copy/paste that info so it would take. Even though its gonna take forever to hand type these guys all out, I will give my list of "plugins" that may be audio related:
QuickTime Plugin 7.7.4 7.7.4.0
RealDownloader Plugin 1.3.3.66
RealNetworks (tm)
RealDownloader Chrome Background Extensions Plug-in (32-bit) 1.3.3.66
RealNetworks (tm)
RealDownloader HTML5VideoShim Plug-in (32-bit)
1.3.3.66 RealNetworks (tm)
RealDownloader PepperFlashVideoShim Plug-in (32-bit) 1.3.3.66
RealPlayer Download Plugin 16.0.3.51
RealPlayer(tm) G2 LiveConnect-Enabled Plug-In (32-Bit) 16.0.3.51
Shockwave Flash 11.9.900.170
Shockwave for Director 12.0.7.148 (for netscape plug-in)
Shockwave for Director 12.0.2.122 (for netscape plug-in)
Silverlight Plug-In 5.1.20913.0
VLC Web Plugin 2.1.0.0
When I open my device manager and look at "Sound video and game controllers" I see 4 options:
1)AMD High Definition Audio Device
2) Bluetooth Audio Device
3) High Definition Audio Device
4) Intel (R) Display Audio
I'm not sure what this means, if I have 4 sound cards or if they are conflicting somehow.
I tried to update drivers on each one. No change. I've tried "restarting firefox with addons disabled" and "check here to see if your addons are up to date" (they were except VLC which I did update before restoring to previous day and it didnt help).
None of the fixes work for me, same issues. Extremely frustrated!! Help?I'm having a similar problem with flash audio. After a few minutes of watching a video or playing a game the audio cuts out but the video keeps working. The audio does not return until I refresh the page. The issue occurs regardless of which browser I'm using (have tired both Firefox and Chrome). Oddly enough, when the audio cuts out from whatever flash application is running, my entire system loses sound until I refresh the webpage or close the browser. For example, I was playing Minecraft with Chrome open in the background and suddenly the sound cut out from both. Once I closed the browser my audio came back. I realized that there was a graphic on the webpage that was flash based which likely triggered the issue.
I do not have any Real plugins.
Incidently I also have Intel (R) Display Audio listed in my device manager
Edit: I forgot to mention, this issue only seems to occure when I watch videos that have been uploaded recently. For some reason the audio does not cut out when I watch a video was uploaded a few months ago. -
Mavericks 10.9.1 Upgrade = Audio issue (lost 5.1 through HDMI)
Hello guys and gals,
I've Macbook pro 15" retina connected as follow
Macbook Pro -> Sony HT -> LG LED TV (55LA7400)
The connection is made via HDMI port. Everything was working fine, no issue when I was using previous OS. Apps such as XBMC, etc was able to output 5.1 fine.
I just upgraded to 10.9.1 and experience Audio issue.
With TV OFF: I was able to see the 5.1 Selection via Audio Midi Setup. Using the built in test feature, was able to check all 6 speakers fine.
However, as soon as I turn on the TV, Macbook screen flickers (as usual when ie tries to recognize the TV and enable Video out) I can only select 2CH via the setup.
This apparently, wasn't the issue prior to the upgrade.
Please advise,
ThanksI should have said - I tried that earlier but I just get:
'This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.'
My 17 inch Macbook Pro is pretty old (2009) and I took it over from my son 3 years ago so I wasn't involved with the initial installation.
Thanks. -
Audio Issues with MacBook Pro (Late 2008)
I am seeing an occasional issue with my MacBook Pro (Late 2008). The Audio will go out... and instead you will just hear static-like clicking sounds when and audio even happens. For example... when you have the up/down volume notification on... and you change the audio volume.. you hear clicks. Or... when you open up a file that has audio.. you will hear the static-like click when the audio starts to try to play.
The work around per-se is to completely shutdown and turn the notebook back on. A simple restart does not seem to fix it... it looks like the system needs to have a bit of energy drain first. Which... worries me that this is a hardware issue and not a driver issue.
Wondering how many others are seeing this???I went to and Apple Support Center last week and I asked some questions about audio because my MBP was having troubles too. The tech told me audio issues are very frequent on these machines and sometimes you have to change a part of the soundcard. He also added you have to bring the MBP to a support center if you're having the problem several times - in my case I'm waiting the next "crash" since I had only 2 issues so far... If you're under warranty go for a check up and see if it really needs assistance. Goodbye
Maybe you are looking for
-
Image only viewable in Safari. Does not show in Firefox 3.0 (OS/Windows), IE7&8
I used an index template .dwt and inserted a logo header image. Using Browser lab it renders in Safari but not in Firefox 3.0 for both OS/Windows, IE 7&8, and Chrome. Using FILE-->VIEW IN BROWSER, which is Safari it is fine. A friend u
-
User cannot drag email out of outlook and save to desktop
User gets the following error; Error Copying File or Folder "The process cannot access the file because another process has locked a portion of the file." To note; outlook 2013 64, windows 7 pro 64 sp1, running a windows server 2012 with redirected f
-
HYPENATE in Apple's Numbers program?
How do I right justify and HYPHENATE in a text box in NUMBERS?
-
Print all delivery number on invoice print out
Hi , When we create a invoice against two delivery only one first delivery number shown on invoice ? but my client want to print all delivery number on invoice print out. can you please guide me how to provide it coz only one delivery print . Regard
-
I want to execute the executable file(ex: Microsoft Word, SapGui, etc)....
Dear... On EP screen I want to execute the executable file(ex: Microsoft Word, SapGui, etc) by clicking button. Is this possible? If I can execute the executable file by clicking button, please give me how to do this. thanks, sangyuun.