Premiere cannot connect to Conexant Audio Factory

Can someone help me get audio on my newly downloaded Premiere program from the Trial adobe photoshop elements 13?

wejech
Could you restate your question?
Photoshop Elements 13 and Premiere Elements 13 are standalone programs which can integrate in several regards once installed on the
same computer. It is not clear how you expect to get sound in Premiere Elements 13 from a tryout version of Photoshop Elements 13. That is the
way I am reading what you wrote.
By any chance are you trying to get Premiere Elements 13 to work for you and you keep getting an error message about "Failed to create Conexant Audio Factory...."?
If so, please read the following which may give you some answers on the subject
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/smart-audio-failed- to-create-conexant/8b668801-1f1e-4ea4-9c5e-a7ef81475dc6
Also, please explore Premiere Elements Edit Menu/Preferences/Audio Hardware ASIO settings Input and Output.
If none of the above applies to your situation, then more details and clarification please on your situation.
Thank you.
ATR

Similar Messages

Cannot connect ATV 2.0 (factory restore) to wifi (tried all secure modes)

Restored ATV to v2.0. ATV sees the wireless network but cannot connect. Have attempted all types of encryption settings:
1. WPA2-PSK: AES, TKIP and mixed mode
2. WPA-PSK
3. WEP 128bit, hex and ascii.
Using Buffalo Airstation WZR-HP-G300NH, firmware 1.74. Wireless was working fine at current version (3.x?) prior to factory restore using WPA2-PSK. I recall having these same issues on another router when I first got my ATV and finally had to revert to WEP 128bit 26 character hex code to get it to work. Unfortunately, that's not working with this router.
Ethernet plug is dead, so I can't connect it directly to the network.
Any ideas?

Closing this as answered. Went into Apple, they pretty much confirmed that both the wifi and ethernet were dead. It was out of warranty so I just bought a new one.

When I restore software to factory setting I have an error. After that my ipad cannot connect to itunes any longer

When I restore software to factory setting I have an error. After that my ipad mini cannot connect to itunes

What does the error say or number?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Cannot connect to TC, even after factory reset

I bought a 1TB TC from apple in 08/2008. I don't recall if it was a refurb or not. It worked fine for 4.5 years with more or less no problems. About a month or two ago the Wi-Fi stopped working. I could connect to the SSID, but occasionally could not get an internet connection without cycling the power of the modem and TC. Finally, the cycling trick stopped working, and while I could connect to the TC I couldn't get internet. I switched to the WiFi capabilties that my Comcast modem had (as I didn't have time to address the issue then). I've finally gotten around to trying to fix it and could not find the TC via WiFi. I attempted a hard reset, but holding the reset button (while under power) did not make the yellow light flash, even after 30 seconds. I then performed a factory reset by holding the reset button while plugging in the TC. The light flashed, indicating the factory reset occurred.
After the factory reset I still cannot:
-Find the TC via WiFi
     I attempted using both my previous SSID and searching for the default "Apple Network XXXXXX" signal. No dice.
-Find the TC via Ethernet
     I attempted to connect my MBP directly to the ethernet port (<--->) on the TC but the red light remains on the Ethernet in Network Settings (Status: Cable Unplugged. Either the cable for Ethernet is not plugged in or the device at the other end is not responding). I verified the cable works by connecting the ethernet cable to the cable modem and instantly getting the green "connected" light and an internet connection.
-Find the TC via Airport Utility
     The TC did not appear, even when plugged in directly with the ethernet cable.
I'm not sure if this is a firmware issue or what. The lights turn on the front and in the LEDs above the ethernet jacks in the back during power/start up but is otherwise unresponsive. I cannot attempt a firmware update as I cannot connect to the TC by WiFi/Ethernet, let alone through the Airport utilitiy.
I'm not sure if this is relevant or helpful but the TC is also making a ticking/hissing slightly faster than once a second as if the drive is being accessed.
Can anyone help!?! I have quite a drive to an apple store and I'm sure what they would charge to mail in and fix it would be excessive.
Many karma points await anyone that can help!!! Thanks in advance for your time!

The power supply is dead.
Solid amber could also be a dead hard disk.
Apple will not fix it and do not supply parts for anyone else to fix them.
It is really no longer economic to repair unless you can DIY. And even then if the hard disk is gone then it really is a waste.. just buy a replacement.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
I have given several methods.. some rough but very cheap to repair the TC.
Otherwise it is just time to buy a new one.. or IMHO a Gen4 is an excellent buy.. second hand or from your local apple refurbish store.

I cannot connect to an update for windows for adobe premiere elements 9 ar to change my sign-in. it gives me an error message 400 saying photo shop is unavailable. this makes the second day.

I cannot connect to an update for windows for adobe premiere elements 9 ar to change my sign-in. it gives me an error message 400 saying photo shop is unavailable. this makes the second day.

This is a user to user forum, not Adobe support
Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
-http://helpx.adobe.com/contact.html?step=PRE

Is there an extension cable (lightning male to lightning female) that will work on audio? i have a lifeproof case on my phone and I cannot connect to my BOSE Speaker that has the lightning connector.

is there an extension cable (lightning male to lightning female) that will work on audio? I have a lifeproof case on my iphone so I cannot connect to my BOSE speaker dock which has a male lightning connector.

Passes through sync, audio AND VIDEO!!! http://www.cablejive.com/products/dockXtender.html

Video & Audio stop cannot connect message appears

For whatever reason, the video freeze while the audio continues concern I wrote about in a previous post, ceased occurring about 3 weeks ago. Now for the past couple days everything stops and a cannot connect to itunes message is displayed. I have to select menu reselect play and select resume. This happened a few times per episode while watching purchased TV shows.

Have you tried another browser?

I cannot connect to the internet to validate my serial number for Premiere Elements 12

Hi
I have checked the firewall and security and privacy settings and allowed every program and site I believe are relevant. I have six days remaining to validate my program. Is there something else I can do to allow the connection? Validating offline does not seem to be an option as the notification is basically devoid of links.
Would appreciate any help.
Grip12

Hi GautamBahl
Thanks for your advice. Renaming the hosts file seems to have worked - I have exported a clip and it does not have a watermark.
Do I restore the hosts file to the original state?
Another problem is when I click on the Help button I cannot connect to the online Help site and others as it says I have no internet connection - which is incorrect.
Any suggestions
Thanks
Grip12

I have 2 ipod touch 3rd gen. Cannot connect to my wifi. One will connect with neighbor's unsecure network..neither connect with my secured network

I have 2 ipod touch 3rd generation. Cannot connect to my wifi. One will connect on and off to my neighbor's unsecure wifi but neither will connect to my secured wifi. All my wireless computers connect plus my Ipad connects. They did connect at one time but haven't used them for anything but audio books which connect through Itunes on my computer. It shows my secured network name. When I originally connected them it was another rather with other security but since then I have bought new equipment. My Ipad and my printers just automatically connect. I have put in the Ip information plus but still no luck.

Try :
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Portege R500: cannot connect the remote DVI monitor via Dynadock

Hello,
I just connected Dynadock (DVI) with my Portege R500. The notebook would be supported -- according to Toshiba -- but my experiment confirms that Dynadock is not able to access DVI port. This implies, that Dynadock is nothing more than USB HUB.
My setup: Vista 32b Business (CZE edition), latest fixes, Toshiba R500.
Software: latest dynadock software 2.3c.
Symptom: I cannot connect to the remote DVI monitor via the dynadock, only two external panels with 800x600 are available, but Vista does not allow me to choose them.
More info: Dynadock Software requires to run without Microsoft Defender, else it blocks service:DisplayLinkService; file:C:\Program Files\DisplayLink Core Software\DisplayLinkService.exe
If you disable MSDef, the message "error 2738" appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
Yes, I do know the VBS issue, and the problem is not caused by VisualBasic -- VBS "Hello World" runs.
If you still believe, that Toshiba Dynadock is compatible with Toshiba R500, then press Fn-F5 and peek at your logs and you must find something like:
In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.
I welcome any comments, hints etc. If you are able to pass this bug report to a responsible engineer, do so please.

Hello again Leo
I still believe you are wrong. Toshiba Dynadock is not designed for Toshiba products only. It is universal product and can be used on every notebook. To be honest I believe it is better to use it with new, more powerful, notebooks.
When you sat your notebook model is listed as compatible I believe you. Why not? Toshiba can list all newer notebooks. No problem at all. To be honest I am also interested to buy Dynadock but after reading your posting I wanted to see how it works exactly.
I have contacted my friend because he works in one big electronic store and I was lucky because he had Portege M500 too.
He was very nice and offered me to test Portege M500 SSD model with Dynadck PA3542EY1PRP. I hope you have the same model. It is DVI model. So I have done follow:
- Portege was preinstalled with clean Vista OS (factory settings started for the first time)
- I have installed latest Dynadock Utilitiy for Vista 2.3c
- Installing this software you must pay attention about installations steps and the installations procedure should not be interrupted
at one step there is window Installation Complete but it is not complete and must be continued with
Display Link Core Software installation
Video Dock installation
at this point the Dynadock must be connected to favorite USB port NOT FROM THE BEGINNING
- At the end I have restarted notebook
The installation was finished properly and I have connected 20 Toshiba Tekbright LCD display (DVI cable). The native resolution is 1680x1050. in Display properties there are shown three displays. Display number 3 belongs to display connected to the Dynadock.
Resolution 1680x1050 was there and display shows perfect picture. I have tested it as extended desktop and it works without problems. I didnt test it playing some movies.
I have also tested it with FN+F5 key combination. It does not work as it should be but there is definitely no error message. I know that FN+F5 key combination is not designed for external graphic card and I know that it can not work well.
At the end I can sat that Dynadock works well with Portege M500 SSD and there is definitely no error message. It works with Vista very well. I have tested it with screen saver and with few restarts. Nothing changes. Everything was OK.
So after this test I can say that you have done some mistake. If you want to use it again I recommend you to install Vista again using recovery image. After doing this you will have clean preinstalled OS. Install software but please follow the menu on the screen and be sure all three components are installed properly. If I am remembering well when you see message about USB audio device installation you must connect Dynadock and continue installation.
PLEASE FOE DYNADOCK USE ALWAYS THE SAME USB PORT!!!
Sorry for this long story but I can say for sure IT WORKS PROPERLY!!!
Have a nice day!

Cannot connect to ASDM on ASA 5505 over https

Problem: Cannot connect to ASDM on ASA 5505 when vlan1 network is changed from the factory default.
Hi all. I am just getting started on a new ASA 5505, working it in a test lab environment. I ran thru the initial setup wizard. During that time I specified a name for Vlan1 (changed from 'inside' to 'INTR-NET'), modified the Vlan1 IP address to use DHCP, and then populated the Device Config Access table with entries corresponding to the entire Class B network here on the local intranet. I don't recall if the factory-default network was already populated, but if it wasn't I added it as 192.168.1.0/255.255.255.0
I then saved the config, and verified that the ASA got a dhcp address using the RS-232 console. I then reconfigured the laptop I have plugged into port 0/1 with it's normal address on the intranet and discovered that I couldn't reconnect to ASDM. The ASDM client times out, and a web browser opened to https://(ASA5505's dhcp addr) fails as well.
I then used the console to add another http IP address matching the specific IP address (xxx.240.113.129/255.255.255.255) which the laptop is set for, to the list of permissible admin connections, but saw no difference.
This issue is much the same as was reported in this prior forum posting:
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=General&topicID=.ee6e1f8&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cc16cb8/4
EXCEPT that I was already aware the admin IP address(es) needed to be registered to enable access via SSH/Telnet/HTTPS.
And, I did that step, but it is not working. I have tried adding various combinations of network ranges in the device config access list, including the specific subnet that the lab's dhcp server assigned to the ASA 5505 (xxx.240.112.0/255.255.254.0), but there is no difference. I can traceroute to the laptop and ping the Vlan1 interface from the laptop, but the https ASDM (and ssh connections too) are not successful. This is very frustrating.
The device is brand new, I see that upon boot it loads asa724-k8.bin, and the software banner says Cisco Adaptive Security Appliance Software Version 7.2(4)
Note also that, from the RS-232 console, if I reset the IP address to the static, factory default (192.168.1.1) and manually config my laptop on the same subnet, then ASDM makes the connection. Just like out of the box. But when I put it back onto our intranet and verify the DHCP lease, then ASDM is a no go.
Can you think of what I've missed?

Good question. Let me add that info plus related Vlan config details:
ASA5505A# show ip
System IP Addresses:
Interface Name IP address Subnet mask Method
Vlan1 INTR-NET XXX.240.112.92 255.255.254.0 DHCP
Vlan2 VoIP 172.26.99.1 255.255.255.0 manual
Vlan3 dmz-unused 192.168.99.1 255.255.255.0 manual
Current IP Addresses:
Interface Name IP address Subnet mask Method
Vlan1 INTR-NET XXX.240.112.92 255.255.254.0 DHCP
Vlan2 VoIP 172.26.99.1 255.255.255.0 manual
Vlan3 dmz-unused 192.168.99.1 255.255.255.0 manual
ASA5505A# show switch vlan
VLAN Name Status Ports
1 INTR-NET up Et0/1, Et0/2, Et0/3, Et0/4
2 VoIP down Et0/5, Et0/6, Et0/7
3 dmz-unused down Et0/0
ASA5505A#
ASA5505A# config t
ASA5505A(config)# show running-config http
http server enable
http XXX.240.0.0 255.255.0.0 INTR-NET
http 192.168.1.0 255.255.255.0 INTR-NET
http XXX.240.113.129 255.255.255.255 INTR-NET
ASA5505A(config)#
ASA5505A(config)# show running-config ssh
ssh 192.168.1.0 255.255.255.0 INTR-NET
ssh XXX.240.0.0 255.255.0.0 INTR-NET
ssh timeout 5
SECURITY LEVEL IS 100 ON Vlan1 and Vlan2, 50 on Vlan3, and traffic is restricted from Vlan3 to Vlan1 because this is the basic license.

I have recently bought an iPod touch 4th generation. The first day I could connect to the app store from my iPod and download what I wanted then today every time I try downloading something a message pops up saying " cannot connect to the iTunes store" y

I just bought An iPod touch 4th generation yesterday, it was working fine I could
Download appl from the store from my iPod without a problem . Today however every time I try downloading something from my iPod touch
it. Doesn't download a message pops up saying " cannot connect to iTunes store" why? I am connected to the Internet and I can easily go on safari and google with. NO problem but everytime I go on the app store it gives me that message can you please help? My iPod isup to date and so is iTunes I so tried bar restarting my iPod and it worked for about 2 minutes the the message kept popping up Again please help me . Thank you

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
If your iPod is defective and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar

My phone wont back up or sync to itunes 10.6. i have a windows 7 32 bit laptop. i have tried updating the ios and receive the message saying it cannot connect to the iphone update server please check network connection. any help

have a iphone 4. i have downloaded the latest version of itunes to update the ios. I am having problems with the back up and sync and also the update. the update error message is coming up saying it cannot connect to the iphone update server. I am useing a windows 7 32 bit laptop. I have also reset my phone to factory settings. Would taking it to one of the stores and they would do it for me??
any help will be great thank you

All I can tell you is that I am having the exact same problem with an iPod Touch and that I was running iTunes 9.2.1.5 at the time it happened. Upgraded to 10.0.0.68 hoping that it might help, but no joy.
I don't want to do a restore just now since the Touch seems to be working fine. Restore will have to wait until I have plenty of free time in case something goes wrong.

Iphone 4; connected to wifi but in cannot connect safari and appstore

Hi, any one knows how to fix my problem? my iphone 4 is connected to my wifi home network. When I use the appstore it says "cannot connect to itunes store". when I use safari "safari cannot open page because it is not connected to the internet". HELP.

The 169 IP address mans it did not correctly negotiate with the router:
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.

Premiere cannot connect to Conexant Audio Factory

Similar Messages

Maybe you are looking for