Premiere CC 2014.1 Blu-ray MPEG 2 export causing error in Sony DVD Architect Pro

I've filed a Bug Report for this but wanted to post here in case it helps anyone else or on the off chance someone can give me a solution / better work around.
Something has changed in the results of a Blu-ray MPEG2 export from Premiere 2014.1 vs those of the previous CC version. The result is that my authoring software of choice, Sony DVD Architect Pro, fails to prepare a disc image giving an error in the final stage of preparation. This workflow has been working fine for 2-3 years.
My work around is to export to original format (mxf / XDCAM EX HQ) and then go back to Media Encoder CC rather than 2014 to produce the Blu-ray MPEG2 file, which works without problem.
Here's a copy paste of my bug report in case anyone with a similar setup has an opportunity to replicate (I'd be very grateful to anyone able to confirm whether its a bug or something specific to me that I might be able to fix).
******BUG******
Export from Premiere 2014.1 directly or via Media Encoder of MPEG 2 1080 50i Blu-ray files causes error in preparation of Blu-ray disc in Sony DVD Architect 5.2.
This error does not occur when using the same Media Encode export preset in the previous version of Premiere Pro CC / Media Encoder.
Steps to reproduce bug:
1. Export Sequence from Premiere
Export, in my case XDCAMEX 1080i HQ, using a media encoder MPEG 2 Blu-ray preset:
Preset Name: HD 1080i 25
Format: MPEG2 Blu-ray
Bitrate Settings: Medium (Target 25Mbps)
2. Create DVD Architect 5.2 project
Set up as single movie Blu-ray project in DVD Architect:
Disc format: Blu-ray Disc
Resolution: 1920*1080
Framerate: 35 interlaced
Choose the file exported from Premiere
3 Prepare Disc
- Select Make Blu-ray Disc
- Click Prepare
- Choose Location of iso
- click next then finish
Result
Around 50% - 60% through the process the following error is displayed:
An error occurred while preparing compilation
Details:
File name: STREAM/00000.m2ts
Status: TSWrapper.dll::CTSWrapper::ProcThreadMain::Failed to read ES file. - The ES file may be shorter than the size described in the MUI file.
Expected results:
A shiny ISO ready to be burnt to disc and sent sent to eager customers.
Its taken me a full day and a half to isolate problem - someone remind me why I fall for the software updates every time?!
Cheers
Iain
Other details:
Windows 7 pro 64 SP1
Intel Core i7 950 @ 3.07GHz
RAM 24.0GB
ASUSTeK P6T DELUXE V2
1279MB NVIDIA GeForce GTX 470

There is a known bug in the H.264-Bluray export. I assume it has nothing to do with your issue, but perhaps it will give you something to consider.
https://forums.adobe.com/message/6848505#6848505
It appears due to a malformed xmpses file. It creates a problem on import into Encore, and I think it should do the same upon import into Architect or it would be ignored entirely. The test is to delete the xmpses file and see if that avoids the issue.

Similar Messages

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Blue-Ray Object: "Menu"; Export File Not Found--Any Clues?

Trying to build a Blue-Ray DVD in CS3 (version 3.0.1.008). Project has motion menus and previews without errors. Upon trying to build either a disc or image I get the error
Blue-ray object: "Menu"; Export file not found.
Where "Menu" is the name of one of the sub menus in my project.
Has anyone seen this error? What is an Export file? When and how does it get created?
I have successfully burned this project to a standard DVD format.

I have the pleasure of closing out my own question. I found the following post that was the clue I needed.
http://forums.creativecow.net/readpost/145/857374
It would appear that the Blue Ray build process is a lot more sensitive to file naming. I brought into my project a menu that I used as a starting template, I edited it in Photoshop and then renamed it in Encore. During the Blue Ray build process Encore rendered the menus to the original template names, but when it needed them to build the DVD it looked for the files that had the new names I had given the menus in Encore.
Here is the fix. I exported the final menus using the Save as Template function in Encore. I then re-imported them as menus and relinked them to the DVD assets. Everything worked fine from that point on.
The interesting thing is this did not happen when building a standard DVD using the same menus.

Do mac mini 2014 support blue ray

I have a Super slim usb2.0 slot-in dvdrw. the seller tell that it support blue ray but I can not see it in my mac mini.Can somebody help?

What is the exact model number an manufacturer of the drive?
If the drive itself is functional, a Bluray disk should at least mount
and be visible in the finder.
Of course, as IIIaass has pointed out, you will need to purchase
player software to view the movies. In addition, when it comes to
playing BluRay movies, some USB 2 drives work and others don't
depending on the software.

NEW Satellite A505 - Blu-ray won't play on WinDVD or Toshiba DVD player

I purchased a Satellite A505 (Windows 7) with a Blu-ray disc player that was pre-loaded with WinDVD, Toshiba DVD player, and one other player (?) - all this software was added 12/21/2009 (by the manufacturer). When I put in a Blu-ray disc WinDVD stops responding and I have to start the task manager to "end task." The Toshiba player says "media not supported." I used the recommended compatibility settings (Windows XP) and it says "incompatible application." I tried using a Sony Vaio w/ Blu-ray and had no problems with the same disc using WinDVD. I don't know what's wrong (and I'm not super tech savvy) - my settings, my drivers, my hardware... ???
I also downloaded the free trial of Corel's WinDVD 2010 and it wouldn't play on that either...
*Note - my model number is A505-S6012 but I can't find this as an existing model on any of the Toshiba sites. It was delivered to the store around 1/4/10, so it's brand new. The A505-S6990 has most of the same features though.

jacuielaura,
I had the exact same issue with the Win DVD BD that was preloaded on my A505-S6014 when I purchased it. I myself also downloaded the Win DVD 2010 free trial and it did not work. Reason being is that they are only allowing people to trial the DVD version of Win DVD 2010 and not the Win DVD BD 2010. I also tried Cyberlink's PowerDVD and it worked but it digitized terribly. So I uninstalled both trials and went to support.toshiba.com and found what I needed to fix it.
I recommend you uninstall the original Win DVD BD version you have and any trial editions you downloaded and follow what I have listed below to fix your problem.
This is only a recommendation. Uninstall and install software at your own risk. If this fix doesn't work for you then you will have to call Toshiba and request a disc to reinstall your original software you uninstalled.
This is how I fixed mine:
Go to Support > Download > then choose your category (Laptop) then your Family (Satellite) then you're model #(A505-6012). Or you can just enter S6012 in the search box and it should bring up a list of all Laptop models with S6012 in them. Choose yours and click Go.
Now from the two drop down lists choose which Operating system: (Windows 7 64 bit) should be what you have, then choose Blu-Ray in the 2nd drop down list.
Download and SAVE these files to your desktop or My Downloads folder so you do not have to search for them again after you reboot.
You should now see this listed:
WinDVD BD for Toshiba for Windows 7 (32/64)(v8.0; 11-05-2009; 176.1M)
Also you will need to download the (Intel Management Engine Interface driver) which is listed in the drop down list under Utility (2nd page):
Intel Management Engine Interface for Windows XP/7 (32/64)(v6.0.0.1184; 10-08-2009; 6.39M)
Reboot after each installation even if it doesnt tell you to.
After both downloads have been installed and the OS is completely loaded again, insert a Blu-Ray disc and hopefully it should automatically play.
P.S. When playing Blu-Ray's I turn my power management to Performance. This may also help.
Good luck!
Hailofaguy

I don't see a blu-ray icon in the destination window of my Final Cut Pro app even if I have an LG blu-ray burner connected

I have a MACBOOK PRO running under 10.9 and 4 Gigs memory. I bought FCP to be able to burn blu-rays videos (I produced a 4h30 video on a trip to Turkey)
My video is produced in full HD. I have an LG blu-ray burner. I bought training videos on FCP at Macpro Video and they show that going on SHARE and selecting ADD A NEW DESTINATION will bring a window where should be an icon of a blu-ray disc. But I don't see any blu-ray icon there. My burner is the model BP40NS20

Thanks Tom! Yes, I have the french version. Then, is there a something to do to correct it.

Share FCPX with Blu-ray USB3 LaCie writer boot error

Hi
I've been around the bush and back looking at how to burn a blu-ray movie to a disc from FCPX and a slim Blu-ray LaCie drive. I was able to burn a 5 minute movie from FCPX without any trouble but as soon as I try and burn something larger (like an 11gig movie) 1080 HD I get up in the morning to find an error referring to boot directory or something with a boot in it. Sorry can't be more secific than that. It's costing me everytime it goes wrong.
I logged a job with LaCie and they said any disc is compaitble so i'm wondering whether there is an issue with Final Cut Pro X ? Thank you for any assistance.
Mike

OK, I have FCPX. I burned DVDs etc all fine. I then burn a Blu-ray. Initially I tried to save to hard drive and burn from there but that didn't work. Seeing FCPX can burn directly to optical device (LaCie) I tried that (share menu in FCP) I got a boot error message that I didn't take a note of. Today I tried again after I checked a few things out. I put in my BD-R disc into the device. FCPX says it is "finishing create blu-ray disc: burning Blu-ray"
at 85% it then said Insert Disc, i did this and it is hanging.
I have been able to burn a 5 mintue Blu-ray sucessfully but as soon as I get to a 55 minute movie I have been unsuccessful. Layers are automatic. speed is automatic, it's a brand new mac running OS X 10.8.2 The guy I bought the discs from reccomends Roxio but why should I buy new software when FCPX says it burns.

When burning to blu-ray gets 99% done then error "device not ready"

I have Elements 11 and an ASUS Combo burner. I can burn to DVDs but when I try to burn to blu-ray it gets done encoding and compiling then at 99% switchs message to "device not ready". The computer sees the drive and the disc is formatted. Any thoughts on why Elements stops right when at end before actually burning to the disc?

I don't know the answer but I suspect Blu-Ray disks are not supported in PSE. I haven't tried it personally but I will have to try it one of these days when my computer is repaired to my satisfaction. I was without a machine for nearly two weeks and now I am using a borrowed one from a friend.

Audio goes out of sync when Blu-ray folder is exported from Encore CS6

I compile a project in Encore using H.264 and .wav files. The audio plays fine directly from the timeline. It also plays fine when I preview it from Encore. When I finally export it as a set of Blu-ray folders, the audio exports out of sync with the video. It is approximately 6-7 seconds ahead of the video. What am I doing incorrectly? When I mux the files into an .MKV, the video is in sync with the audio so I know the files themselves do not have different start times.
I am running with an HP Z820 with Windows 7, 64-bit OS and 16GB RAM.

For anyone who's interested, I found a solution to this problem. Once imported into Encore, the leader in on the video and audio files cannot be trimmed at all. (I had been trimming the beginning of the video and matching audio file to eliminate the 8 seconds of dead space at the start of the clips.) Although the trim took effect immediately in the Encore timeline and I could also watch it in preview in sync, exporting was another story. The audio track seems to retain the trim when exporting but the video track does not, hence the 6-7 second delay between audio and video.
I reimported the files to my project and left in the 8 seconds of dead space at the start and voila! The video and audio match up when exported.
Ideally the trim tool would just work as its supposed to through export and all, but at least I found a solution I can work with.
(As a note, the trim works just fine in export on Encore CS5. I only had this problem with Encore CS6.)

Blu Ray drive/burner can't write dual layer DVD - W500 Vista 64

I recently did a clean Vista 64 Business install on a new hard drive. I pretty much have everything up and going, except the Blu Ray drive doesn't recognize that it can write dual layer DVDs. I ran Nero InfoTool and it, too, tells me that the drive cannot write dual layer DVDs. (Pretty much everything in InfoTool is checked, read and write, except all the HD-DVDs and the dual layer DVD write functions.) Does anyone have any ideas? My understanding is that the drive can write dual layer DVDs.

I'll answer this with the same information that I posted at TPF:
From: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70234
Reads or writes data with speedy maximum data transfer rates of:
* 16x maximum (writing to CD-R media)
* 10x maximum (writing to CD-RW media)
* 5x maximum (writing to DVD-RAM media)
* 8x maximum (writing to DVD+/-R media)
* 4x maximum (writing to DVD+/-RW media)
* 2x maximum (writing to BD-R/RE SL media)
* 1x maximum (writing to BD-R/RE DL media)
* 24x maximum (reading CD-ROM, CD-R media)
* 24x maximum (reading CD-RW media)
* 8x maximum (reading DVD-ROM/-R/+R SL media)
* 6x maximum (reading DVD-ROM/-R/+R DL media)
* 6x maximum (reading DVD-RW/+RW media)
* 5x maximum (reading DVD-RAM media)
* 2x maximum (reading BD-ROM media)
* 2x maximum (reading BD-R/RE SL/DL media)
It appears that DL (dual layer) writing in DVD-R and DVD+R formats is not supported.

Encore crashes or freezes when import blu ray mpeg files

Regular DVD mpeg files work just fine. I tried uninstalling and re-installing. No luck. I have CS4. Also update CS4 to most recent version. Please help!

Some reading... one or more of the links may help
Wav -vs- Ac3 in motion menu http://forums.adobe.com/thread/704886?tstart=0
Large Fonts Problems http://forums.adobe.com/thread/880358?tstart=0
NEVER use Overrides http://forums.adobe.com/thread/860691?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems
To create a dual layer DVD (or BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941?tstart=0

Can't burn Blu-ray disk image because get error message, "The operation couldn't be completed. (DSPPublishing error -1012.) What does it mean?

There was an error creating your disk image. The operation couldn't be completed. (DSPPublishing error -1012)

I don't have a background image. I called Apple and they had no idea what that error number meant. I deleted preferences for FCPX still didn't work, then delted all preferences and set up a new user. It now works. Apple has no idea what is going on.

Encore CS6 Blu-Ray "fatal error" during build

I have an external ble-ray drive that I just bought from OWC for my MacBook Pro. I have created a project for a wedding that has 3 sequences. Everything looks good, and the building/burning process gets about 90% done and I get this:
Blu-ray Error: "fatal error", Code: "6", Note: "Video buffer underflows. Total bitrate is too high near time = 0.0000000 seconds - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
I am new with Adobe, especially Encore. This is my third try with the same message. I tried building to Blu-Ray disc as well as Blu-Ray image. I have several couples waiting on a Blu-Ray disc for their wedding video, and I can't produce one! So frustrated!
Any help is MUCH appreciated!
Josh

ElCuso12 wrote:
Blu-ray Error: "fatal error", Code: "6", Note: "Video buffer underflows. Total bitrate is too high near time = 0.0000000 seconds - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
This is actually a very interesting error message. There are 4 blu-ray authoring programs that can display a error message that contains "video buffer underflows" when authoring a Blu-Ray with H.264.
These 4 blu-ray authoring programs are: Sony DVD Architect Studio, Sony DVD Architect Pro, Adobe Encore and Sonic Senarist BD.
Another interesting thing is also that the complete error message that is displayed by both Sony DVD Architect Studio and Sony DVD Architect Pro is exactly identical, word for word, with the error message that is displayed by Sonic Senarist BD.

Blu Ray via Encore: H.264 or MPEG?

Hi,
I want to create a Blu Ray via Encoe Export to be played on a Samsung 1400 Blu Ray Player. Which settings would you use? H.264 or MPEG? What is the best bit rate?
Regards, Sascha

h.264 will give you better quality at a given bit rate. If memory serves, something between 19 and 30 Mbps.

Blue Ray disk created using premiere 10 does not show menus

I have a video project with a main menu and 5 scene menus. I burn the project (using premiere Elements 10) to a Blue-ray disc using preset H.264 1920x1080i PAL Dolby with quality option set to "Fit Contents to available space" . The software happily creates the disc with 17.6GB of data (main stream, 00000.m2ts is 18,413,568 KB (17.5GB) and 6 small streams for main & scene menus.
However, when this disc is reinserted into the drive, it does not automatically start with the main menu.
If I burn the same project to a DVD with PAL_Widescreen_DolbyDVD preset with quality option set to "Fit Contents to available space", it creates the DVD which, when reinserted into the drive, starts automatically with the main menu.
The environment is Wndows 7 64bit with SONY BD RW BWU-500S ATA Device .
What do I need to do to get the Blue Ray disc to start with the main menu?
Killy

Killy
Thanks for the reply.
Any day now I am intending to update the following blog post dealing with the type of computer Blu-ray playback situation that you are facing, but I have not gotten to it yet.
Please review the blog post. It will give an idea of some of the issues involved.
ATR Premiere Elements Troubleshooting: PE: Blu-ray Computer Playback and More
Please look at the Media Player Classic HC x64.
The VCL player description is for 2.0.8, 32 bit, the latest non beta version at the time (August 2013). But the principles should hold up in later versions of the VCL Player.
I should have updates on my 2013 observations soon.
ATR

Premiere CC 2014.1 Blu-ray MPEG 2 export causing error in Sony DVD Architect Pro

Similar Messages

Maybe you are looking for