Premiere CC 2014 Always regenerates peak files when switching between computers

I have editing PCs at work and at home so I store my projects on portable hard drives, but every time I move to a different computer Premiere has to go through a regenerate the audio peak files. I have all of my computers set to store the PEK files next to the original media, and they are there, but it seems to ignore them. This costs me a lot of time so I'd really like to find a solution.
Most projects use a mix of RED footage, DSLR footage and Zoom WAV audio files.

Hi,
I would suggest the following steps:
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Run a disk permission repair on your boot drive, and
Reset Home Folder permissions and ACLs Error | Apple Support Communities
Thanks,
Rameez

Similar Messages

Premiere CC 2014 continuously generating peak files

Hey all,
I have a problem that seems to have started last week, when I finally had the time to upgrade to 2014 (was in the middle of a few projects and did not want any 'new software issues' to us slow down).
I expect the generation to happen upon import, but I see that it is hitting the same files over and over. I checked the cache folder this morning to see what it was doing and was shocked to see that it was generating thousands of .pek files.
I have included a screenshot of the folder. This is for just one file in my project and there were 3839 of these when I came in this morning. It is also happening for all the other files in the project.
So it would seem that after it gets finished running through all the files in the project, it starts over and does another set, then another, and so on.
So, I turned off auto peak file generation and quit the program. When I restarted while no more peaks were generated, no waveforms are showing up (odd given that there are so many to choose from).
Any clue as to why this is happening?
On the current project I am using H.264 (720 29.97) files and ProRes (Lt) 1080 29.97 files (if this makes a difference).
Mac (mid 2012) 10.8.3 - 2 x 2.4 GHz 6-Core Intel Xeon
24 GB 1333 MHz DDR3 ECC
NVIDIA Quadro K5000 4096 MB
Is this a bug, or new feature that I need to disable? I did not have this problem with CC (pre 2014).

I had this problem on Win 7. Deleted ALL of the peak files associated with the project and relaunched. It took a while for Premiere to create all new peak files, but eventually it stopped continuously rec-creating them.
A few other things:
If you set the Preferences to Media - Save Media Cache Files next to the originals where possible, it may alleviate some problems.
Also, Premiere will create PEK files for as many audio tracks as are in the source media - even if you do not have any audio in these tracks.

Adobe Premiere CC 2014.2: losing rendered files when using warp stabilizer

Hi,
I am constantly losing rendered files when using the warp stabilizer. So far I have tried about every hint I could find on the web such as cleaning the cache, rebuilding the rendered files, creating additional sequences etc etc.
Honestly I am getting tired of using a product that isnt cheap in the first place to rent and where a bug like this apparently persists over several product versions without being fully fixed (I have had this problem throughout 2014 but according to forum postings others seem to have problems with much earlier versions as well).
I would be really grateful if somebofy has any suggestion how this can be addressed.
I am also happy to help testing fixes - if there are any fixes available.
Thanks a lot and Happy New Year!
Martin

Hi Catherine,
Welcome to the Adobe forums.
Please try the steps mentioned below and check if it works for you.
1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
Launch Premiere Pro and import the clip to check.
Regards,
Vinay

Corrupted ext. hd when switching between computers.

I have a Client who is using an external fire wire drive to record music in protools on an osx machine. then he takes it to a os 9.2 machine to mix it. The drives directory system keeps becoming corrupted. How do we stop this from happenning?
He has been recording this way for years and just barely it started doing this. Does he need a new hard drive?

Any more specific report on the corruption when you use Disk Utility in OSX to Repair it?
When exactly & where do you notice this corruption? Say only after trying to write from OS9 maybe?

Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

Forced to Close all open applications when switching between users.

I recently purchased a MacBook Pro 13 inch, and have 2 accounts set up on the computer.
When switching between users on the computer, I am always forced to close all open applications on the current user, in order to switch to another user.
I was wondering if there was ANY way to keep the pages (specifically Safari) open when switching to another user, so that I can go back to them when I log back in to the other account.
thanks for the help!

Enjoy!
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8672.html

CC aplications go to white screen and lock up the computer when switching between apps

We have been successfully using CC for several months, then about 30 days ago suddenly when we tried to switch apps between dreamweaver, and Photoshop the computer went to a White screen and froze. This problem is completely repeatable, and we are at a complete loss to correct the problem. Any ideas? It doesnt do this when you switch withing Bridge and Photoshop, but with anythign else,,,,,,,,,,,,,,, CRASH!!

I am unable to get into the chat. I tried explorer and chrome and neither will allow us to access the chat. It continues to go around and around.
De: John T Smith
Enviado el: Thursday, November 20, 2014 8:41 PM
Para: Beatriz Neto
Asunto: CC aplications go to white screen and lock up the computer when switching between apps
CC aplications go to white screen and lock up the computer when switching between apps
created by John T Smith <https://forums.adobe.com/people/JohnTSmith> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/6949285#6949285>

Enforcing commit when switching between windows

Today our OracleForms application is built using the call_form built-in. The end user can navigate from FormA to FormB but he must close formB in order to continue work in FormA. This is the expected behavior of the call_form built in. We also ensured that all changes are committed when navigating between forms; posting is not used. This architure/technique ensures that end-users commit frequently; with 400concurrent users we must ensures locking is kept to a minimum. Consequence of this architecture is that we do not have a full MDI application.
In order to have a full MDI application I have to use the open_form built-in but if possible i want to keep 1 session for each application user, not 1 session for each form opened. This in order to prevent an explosion of database sessions. Oke lets use the no_session parameter.
Now what's my problem ? I order to keep locking to a minimum I want to enforce the end user to commit changes when switching between windows. Does somebody has an advice which trigger(s) would be the most appropriate one ?
Note : that the "raise form_trigger_failure" has no effect in the "when-window-deactivated" trigger.
Note : post-form does not fire since I'am not actually leaving the calling form
Note : if possible I would like to program the validation in the calling form instead of the called form; this in order to prevent switching between windows - can cause screen flikkering.
chris

note the when-window-deactivate does not always fire when switching between windows of different forms !!!
I simply want to keep the focus on the calling form when there are pending changes and throw a message to the enduser saying 'please commit before continuing...'
I tried to program the when-form-navigate trigger but in this trigger I'am not able to retrieve the form_status of the called form.
any other help would be appreciated.

Graphic distortion when switching between external and built-in display (rMBP)

Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

Do you have intel gpy as well as other graphic card? You may be viewing document on different gpu's. PS does not like multiple gpu's.

How to keep location in a table persistent when switching between pages

Hi -
How would I keep my last location persistent in a table when switching between pages? If I am on cell X and switch to another page, when returning to the previous page, I return to the top of the table. This can be very annoying when trying to find the same location in a large table (or even in a small one).
Thanks.

If by "page" you mean "sheet", you can do it. To get back to the same place you were in the other sheet, click on the sheet in the sidebar (the list of sheets/tables/charts/etc on the left). Don't click on the table, click on the sheet.

Auto show/hide Plug-in when switching between patches in Mainstage 2

Hi, I was wondering if there is a way to have Mainstage 2 automatically reveal a plug-in when switching between patches. For instance, when switching to a Clav patch, have it reveal the EVD6 plug-in. Then, if you switch to a Rhodes patch, it automatically closes the EVD6 and reveals the EVP88.

As far as I know, no. I haven't found a way to do this. It would be useful in certain setups.

Error when switching between drafts: "The instruction at "0x009f6487" ...

Running Contribute CS3 and get this error frequently when switching between documents in the Draft Console:
The instruction at "0x009f6487" referenced memory at "0x06bd7a24". The memory could not be "read".
Click on OK to terminate the program
Click on Cancel to debug the program
I do not get this error any other time. Only when editing multiple documents and switching between them. Clicking Save for Later on the toolbar, instead of clicking directly on the document in the Draft Console does not help.
Any help or suggestions are much appreciated.

Can you please try clearning the Contribute preferences?
To Clear the preference, quit Contribute, and then delete the Contribute CS3 folder in C:\Documents and Settings\<user>\Local Settings\Application Data\Adobe\ and also run the following command " reg delete "HKCU\Software\Adobe\Contribute 4.1" /f " if you are using Contribute CS3. Reconnect to the site and try the same scenario.
Note that, if you clear the preferences then no connection will be listed in Contribute, you need to recreate the connections. It will be like a fresh installation.

Hanging when switching between programs?

Is there a soluton to programs hanging when switching between one program to another?

Safe Mode deletes some system caches that may help..
Startup your Mac in Safe Mode
A Safe Mode boot takes longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu then try switching between applications.

Yosemite 10.10.1 - DNS cache does not clear when switching between WiFi networks

Before updating to Yosemite, DNS caches would clear when switching between WiFi networks, as they should.
For Example, when using an Exchange server, your server name might be something like mail.company.com. Outside of the corporate LAN the IP would resolve to the outside (WAN) address. When you move the laptop inside the corporate LAN, it should clear the cache so mail.company.com resolves to the internal (LAN) address. This is just one example of a dumb DNS transition not taking place switching from outside to inside (and vice versa).
Instead, OS X is holding onto the outside DNS record even when moving to the Corporate LAN. The only way to fix is to run the DNS cache command (which is MUCH more convoluted in Yosemite now), or more easily, to quickly turn off then turn on WiFi.
This is an irritation as I have to perform this action every morning, and every time I come back to my desk from offsite.

Well, clearing the caches is as simple as this, no?
Clear MDNS Cache
sudo discoveryutil mdnsflushcache
Clear UDNS Cache
sudo discoveryutil udnsflushcaches
One other thing: Have you tried 10.10.2? There are many many fixes in 10.10.2 over 10.10.1.

Premiere CC 2014 Always regenerates peak files when switching between computers

Similar Messages

Maybe you are looking for