Premiere CC 2014 does not use CUDA or Processor

In Premiere CC this all ok!
the CC2014 he does not use or CUDA or the processor.

Similar Messages

Adobe After Effects, Premiere and Encoder does not use the GPU (CUDA) ?

Please! Explain me. Why? Adobe After Effects, Premiere and Encoder does not use GPU (CUDA) ?
Everytime i have GPU Load from 0 to 10% !!! (GeForce GTX 970) And also my CPU load is not full. Any suggestions?

seg.48162731 wrote:
At the moment i use AE, AP and ME CC 2014 8.2 with the latest updates. I have GTX 970 and AMD 8350. What's my problem?
Which chipset is on your system's motherboard? Which motherboard is your PC equipped with?
If the motherboard is using an AMD 790 or 970 series chipset, the HyperTransport bus will be running at a reduced speed, and thus the CPU performance will be worse than a quad-core Intel i5 CPU without hyperthreading. In many instances, this means that the GPU will be laying idle, waiting for the CPU to catch up.
If on the other hand the motherboard uses an AMD 990FX chipset, then it's likely that there is something else bottlenecking your PC.

Why does FCP not use the quad Processors for rendering

Hi. I notice the other day when I renderd out a rather long project that FCP does not use all available processors. I notice on some effects that it uses the graphics card and non of the processors. It there a reason for this and is there a way to make better use of the quad core in rendering both audio and video files.
Thanks
GW
Mac Pro Quad Mac OS X (10.4.8) Quad Core, 2 Gig Ram, 250 & 500 Gig

Good question. I've been asking around off forum looking for an answer too. Motion is a big one for me. I'd love to have it render out with all 4. But then again, it's not meant to be a render engine. Both FCP and Motion are now becoming more GPU intensive.
Now... COMPRESSOR uses all 4 at the same time.
CaptM

Premiere Pro CC (2014) does not show preview!?

Hello there,
I've a serious problem. Premiere Pro CC 2014 does not respond in the preview monitor.
It's not like the program doesn't answer but it's only the way of working with footage.
I can't watch my footage but I can set in- and outpoint. I can't work because I can't see anything.
What's the matter? How can I fix this?
Thanks

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Premiere Pro CC 2014 Does Not Import Panasonic GH4 Spanned Files as a Single Clip

Premier Pro CC 2014 does not import Panasonic GH4 spanned files as a single clip. I have made a short video that shows the problem with the GH4 footage and it show how the Canon XA-10 footage imports correctly.
Is this a known problem? Am I doing something wrong? It makes the Master Clip Effects in Premier Pro useless because every spanning fragment is turned into a master clip.
Problem demonstration video: http://screencast.com/t/03wzQoxAUXAQ

Jim,
I've looked up all sorts of MP4/MOV comparisons on the web ... most conclude that mov is perhaps a bit "safer" on an Apple OS and mp4 "safer" on a PC and non-Apple "devices", but generally list the contents of the two as being nearly indistinguishable. I do realize the Qt has had ... issues ... within the Adobe programs, especially on PC's.
You have any other good info? Always looking to learn from the more experienced ...
Neil

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows: Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
*** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
Thanks for the help, dj_paige.

Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840)

Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840) but instead only a Intel HD 4600. How do I ensure that PS is using the full phardware power of my notebook. My OS is WIN 8.1 Thanks for your help, Meik

In the end it was the NVIDIA software - excluding PS as application for support by high performance graphic processor to save energy - activated NVIDIA card use for PS & LR all fine now.

My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

My serial number for adobe photoshop elements 12 and premiere elements 12 does not work. On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9. I have purchased those products in the past, but just recently upgraded to elements 12. I can use the the photoshop organizer, but can't open the photoshop editor.

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Premiere elements 11 does not recognize the external ASUS Blu-ray burner

Premiere elements 11 does not recognize the external ASUS Blu-ray burner

More on what Hunt talked about...
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
And a solution... to try even if you do not have the problems described above
Set your DVD output to a folder on your hard drive and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

How to invoke a jsp page from java which does not use Servlets?

Hello,
I am working in Documentum. I am trying to invoke a jsp page from another java page which does not use Servlets.
I tried doing this by just instantiating the java class related to the jsp page from my present java class.In my java class related to the jsp page, I have defined onInit() and onRender() methods.
Now, I am trying to call the jsp page from my present java class by just instantiating the java class related to the jsp page. This throws a java.lang.NullPointerException.
Any comments or suggestions on this.Any help would be appreciated.
Thanks,
Ranjith M.V

RanjithM.V wrote:
Hello,
Thanks for the reply. One important thing I forgot to mention. I am also using xml component.And?
As this is the standard way used for coding in Documentum, I do not want to use Beans.Well, JSP's should, in and of themselves, contain no functional code. It should all be only display.
Without that is it not possible?What did I say? I said,
masijade wrote:
It is possible, but I very, very, very, much doubt, that it would be worth the effort.And, if you don't know how, a forum is not truely going to be able to help you implement it (at least not in less than a few years time, at which point it would be outdated).
>
Appreciate your understanding and help.
Thanks,
Ranjith M.V

Pam.conf does not use ldap for password length check when changing passwd

I have already posted this in the directory server forum but since it is to do with pam not using ldap I thought there might be some pam experts who check this forum.
I have dsee 6.0 installed on a solaris 10 server (client).
I have a solaris 9 server (server) set up to use ldap authentication.
bash-2.05# cat /var/ldap/ldap_client_file
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_SERVERS= X, Y
NS_LDAP_SEARCH_BASEDN= dc=A,dc= B,dc= C
NS_LDAP_AUTH= tls:simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= one
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_SERVER_PREF= X.A.B.C, Y.A.B.C
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= tls_profile
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,dc=A,dc=B,dc=com?one
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_BIND_TIME= 10
bash-2.05# cat /var/ldap/ldap_client_cred
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=A,dc=B,dc=C
NS_LDAP_BINDPASSWD= {NS1}6ff7353e346f87a7
bash-2.05# cat /etc/nsswitch.conf
# /etc/nsswitch.ldap:
# An example file that could be copied over to /etc/nsswitch.conf; it
# uses LDAP in conjunction with files.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
# the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
passwd: files ldap
group: files ldap
# consult /etc "files" only if ldap is down.
hosts: files dns
ipnodes: files
# Uncomment the following line and comment out the above to resolve
# both IPv4 and IPv6 addresses from the ipnodes databases. Note that
# IPv4 addresses are searched in all of the ipnodes databases before
# searching the hosts databases. Before turning this option on, consult
# the Network Administration Guide for more details on using IPv6.
#ipnodes: ldap [NOTFOUND=return] files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
netgroup: ldap
automount: files ldap
aliases: files ldap
# for efficient getservbyname() avoid ldap
services: files ldap
sendmailvars: files
printers: user files ldap
auth_attr: files ldap
prof_attr: files ldap
project: files ldap
bash-2.05# cat /etc/pam.conf
#ident "@(#)pam.conf 1.20 02/01/23 SMI"
# Copyright 1996-2002 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# PAM configuration
# Unless explicitly defined, all services use the modules
# defined in the "other" section.
# Modules are defined with relative pathnames, i.e., they are
# relative to /usr/lib/security/$ISA. Absolute path names, as
# present in this file in previous releases are still acceptable.
# Authentication management
# login service (explicit because of pam_dial_auth)
login auth requisite pam_authtok_get.so.1 debug
login auth required pam_dhkeys.so.1 debug
login auth required pam_dial_auth.so.1 debug
login auth binding pam_unix_auth.so.1 server_policy debug
login auth required pam_ldap.so.1 use_first_pass debug
# rlogin service (explicit because of pam_rhost_auth)
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_dhkeys.so.1
rlogin auth binding pam_unix_auth.so.1 server_policy
rlogin auth required pam_ldap.so.1 use_first_pass
# rsh service (explicit because of pam_rhost_auth,
# and pam_unix_auth for meaningful pam_setcred)
rsh auth sufficient pam_rhosts_auth.so.1
rsh auth required pam_unix_auth.so.1
# PPP service (explicit because of pam_dial_auth)
ppp auth requisite pam_authtok_get.so.1
ppp auth required pam_dhkeys.so.1
ppp auth required pam_dial_auth.so.1
ppp auth binding pam_unix_auth.so.1 server_policy
ppp auth required pam_ldap.so.1 use_first_pass
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned for authenctication
other auth requisite pam_authtok_get.so.1 debug
other auth required pam_dhkeys.so.1 debug
other auth binding pam_unix_auth.so.1 server_policy debug
other auth required pam_ldap.so.1 use_first_pass debug
# passwd command (explicit because of a different authentication module)
passwd auth binding pam_passwd_auth.so.1 server_policy debug
passwd auth required pam_ldap.so.1 use_first_pass debug
# cron service (explicit because of non-usage of pam_roles.so.1)
cron account required pam_projects.so.1
cron account required pam_unix_account.so.1
# Default definition for Account management
# Used when service name is not explicitly mentioned for account management
other account requisite pam_roles.so.1 debug
other account required pam_projects.so.1 debug
other account binding pam_unix_account.so.1 server_policy debug
other account required pam_ldap.so.1 no_pass debug
# Default definition for Session management
# Used when service name is not explicitly mentioned for session management
other session required pam_unix_session.so.1
# Default definition for Password management
# Used when service name is not explicitly mentioned for password management
other password required pam_dhkeys.so.1 debug
other password requisite pam_authtok_get.so.1 debug
other password requisite pam_authtok_check.so.1 debug
other password required pam_authtok_store.so.1 server_policy debug
# Support for Kerberos V5 authentication (uncomment to use Kerberos)
#rlogin auth optional pam_krb5.so.1 try_first_pass
#login auth optional pam_krb5.so.1 try_first_pass
#other auth optional pam_krb5.so.1 try_first_pass
#cron account optional pam_krb5.so.1
#other account optional pam_krb5.so.1
#other session optional pam_krb5.so.1
#other password optional pam_krb5.so.1 try_first_pass
I can ssh into client with user VV which does not exist locally but exists in the directory server. This is from /var/adm/messages on the ldap client):
May 17 15:25:07 client sshd[26956]: [ID 634615 auth.debug] pam_authtok_get:pam_sm_authenticate: flags = 0
May 17 15:25:11 client sshd[26956]: [ID 896952 auth.debug] pam_unix_auth: entering pam_sm_authenticate()
May 17 15:25:11 client sshd[26956]: [ID 285619 auth.debug] ldap pam_sm_authenticate(sshd VV), flags = 0
May 17 15:25:11 client sshd[26956]: [ID 509786 auth.debug] roles pam_sm_authenticate, service = sshd user = VV ruser = not set rhost = h.A.B.C
May 17 15:25:11 client sshd[26956]: [ID 579461 auth.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:25:11 client sshd[26956]: [ID 724664 auth.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:25:11 client sshd[26956]: [ID 100510 auth.debug] ldap pam_sm_acct_mgmt(VV), flags = 0
May 17 15:25:11 client sshd[26953]: [ID 800047 auth.info] Accepted keyboard-interactive/pam for VV from 10.115.1.251 port 2703 ssh2
May 17 15:25:11 client sshd[26953]: [ID 914923 auth.debug] pam_dhkeys: no valid mechs found. Trying AUTH_DES.
May 17 15:25:11 client sshd[26953]: [ID 499478 auth.debug] pam_dhkeys: get_and_set_seckey: could not get secret key for keytype 192-0
May 17 15:25:11 client sshd[26953]: [ID 507889 auth.debug] pam_dhkeys: mech key totals:
May 17 15:25:11 client sshd[26953]: [ID 991756 auth.debug] pam_dhkeys: 0 valid mechanism(s)
May 17 15:25:11 client sshd[26953]: [ID 898160 auth.debug] pam_dhkeys: 0 secret key(s) retrieved
May 17 15:25:11 client sshd[26953]: [ID 403608 auth.debug] pam_dhkeys: 0 passwd decrypt successes
May 17 15:25:11 client sshd[26953]: [ID 327308 auth.debug] pam_dhkeys: 0 secret key(s) set
May 17 15:25:11 client sshd[26958]: [ID 965073 auth.debug] pam_dhkeys: cred reinit/refresh ignored
If I try to then change the password with the `passwd` command it does not use the password policy on the directory server but the default defined in /etc/default/passwd
bash-2.05$ passwd
passwd: Changing password for VV
Enter existing login password:
New Password:
passwd: Password too short - must be at least 8 characters.
Please try again
May 17 15:26:17 client passwd[27014]: [ID 285619 user.debug] ldap pam_sm_authenticate(passwd VV), flags = 0
May 17 15:26:17 client passwd[27014]: [ID 509786 user.debug] roles pam_sm_authenticate, service = passwd user = VV ruser = not set rhost = not set
May 17 15:26:17 client passwd[27014]: [ID 579461 user.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:26:17 client passwd[27014]: [ID 724664 user.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:26:17 client passwd[27014]: [ID 100510 user.debug] ldap pam_sm_acct_mgmt(VV), flags = 80000000
May 17 15:26:17 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:17 client passwd[27014]: [ID 988707 user.debug] read_authtok: Copied AUTHTOK to OLDAUTHTOK
May 17 15:26:20 client passwd[27014]: [ID 558286 user.debug] pam_authtok_check: pam_sm_chauthok called
May 17 15:26:20 client passwd[27014]: [ID 271931 user.debug] pam_authtok_check: minimum length from /etc/default/passwd: 8
May 17 15:26:20 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:20 client passwd[27014]: [ID 417489 user.debug] pam_dhkeys: OLDRPCPASS already set
I am using the default policy on the directory server which states a minimum password length of 6 characters.
server:root:LDAP_Master:/var/opt/SUNWdsee/dscc6/dcc/ads/ldif#dsconf get-server-prop -h server -p 389|grep ^pwd-
pwd-accept-hashed-pwd-enabled : N/A
pwd-check-enabled : off
pwd-compat-mode : DS6-mode
pwd-expire-no-warning-enabled : on
pwd-expire-warning-delay : 1d
pwd-failure-count-interval : 10m
pwd-grace-login-limit : disabled
pwd-keep-last-auth-time-enabled : off
pwd-lockout-duration : disabled
pwd-lockout-enabled : off
pwd-lockout-repl-priority-enabled : on
pwd-max-age : disabled
pwd-max-failure-count : 3
pwd-max-history-count : disabled
pwd-min-age : disabled
pwd-min-length : 6
pwd-mod-gen-length : 6
pwd-must-change-enabled : off
pwd-root-dn-bypass-enabled : off
pwd-safe-modify-enabled : off
pwd-storage-scheme : CRYPT
pwd-strong-check-dictionary-path : /opt/SUNWdsee/ds6/plugins/words-english-big.txt
pwd-strong-check-enabled : off
pwd-strong-check-require-charset : lower
pwd-strong-check-require-charset : upper
pwd-strong-check-require-charset : digit
pwd-strong-check-require-charset : special
pwd-supported-storage-scheme : CRYPT
pwd-supported-storage-scheme : SHA
pwd-supported-storage-scheme : SSHA
pwd-supported-storage-scheme : NS-MTA-MD5
pwd-supported-storage-scheme : CLEAR
pwd-user-change-enabled : off
Whereas /etc/default/passwd on the ldap client says passwords must be 8 characters. This is seen with the pam_authtok_check: minimum length from /etc/default/passwd: 8
. It is clearly not using the policy from the directory server but checking locally. So I can login ok using the ldap server for authentication but when I try to change the password it does not use the policy from the server which says I only need a minimum lenght of 6 characters.
I have read that pam_ldap is only supported for directory server 5.2. Because I am running ds6 and with password compatability in ds6 mode maybe this is my problem. Does anyone know of any updated pam_ldap modules for solaris 9?
Edited by: ericduggan on Sep 8, 2008 5:30 AM

you can try passwd -r ldap for changing the ldap passwds...

Mail does not use correct outgoing server

Problem
Mail in Mavericks (and also IOS6 snf 7) does not use the outgoing smtp server associated with the account being used. This results in either a failure to send or mail being put into the wrong "Sent" folder.
Background
I have most of my non-icloud mail pulled down to a home server from which my laptops and ios devices access various accounts using imap. The local home server also provides smtp and relays all mail to my ISP. Recently I have been switching from an old home server (Mac Mini) to a new one (Raspberry pi running the debian Raspbian version with fetchmail, Dovecot and postfix setup).
While making the changeover I had access to both the old server and the new server enabled on my laptop. Naturally the majority of the settings (Name, email address etc) were the same although the name and address of the server to be used for both incoming and outgoing mail were different. This seemed tp work fine for incoming. However when I tested outgoing mail the copy that should appear in the "sentt" box went missing. This usually indicates some mistake in the setting of the sent mail folder on the accounts but this all checked out.
I eventually found the missing outgoing mail intended to go through the new server in the sent box on the old server. Further trials showed that no matter what I did the outgoing would always default to the old (and therefore first set up) outgoing server.
Deleting the old account and the old outgoing server of course should cure the problem and will eventually be the solution for me when I kill the old server. But i wanted to get to the bottom of the problem in case it reappeared in other contexts. Checking the "use only this server" box produced failure to send rather than the correct result.
Trialing various alterntaive settings showed that the problem occurs when there are two outgoing servers with the email address in the settings and the user name on the outgoing server name being the same. I had assumed that changing the description field would distinguish between the various settings; however this did not work. Changing the Name Field did work eg by putting (O) after my name.
It appears therefore that mail selects the outgoing server on the basis of email address (with the full name included) and user name (trrespective of the actual server or the Description that shows in the smtp server listing. In some ways this is logical but it produces problems in the context I have described and would also be a difficulty if you wanted to use an alternative server when in a different location.
I have trawled support and elsewhere for any thing similar. Lots of mail problems (don't get me started on the way icloud loses outgoing each time you edit the list!) but I have not found any posts on precisiely this point.
IOS devices seem to have similar problems, but a quick attempt at a similar solution does not work, and I cannot be bothered to test the options. I will simply clean them out and put in the new accounts.
Advice
Grateful for any comments or advice from people who have encountered similar problems and whether my diagnosis if correct. Have I missed any obvious corrections that would clear this up. I do not know whether this is a Mavericks issue or also appears in earlier OSX versions.
CPE

Peter,
Where ever the Sent and Trash folders show in the Sidebar, highlight first one, and then the other, followed by clicking on Mailbox in the Menubar, and choosing Use This Mailbox For, and choose the function.
Keep us posted on your progress.
Ernie

Premiere CC 2014 does not use CUDA or Processor

Similar Messages

Maybe you are looking for