Premiere CC 2014's timeline bar showing one frame ahead

Hey guys, my timeline bar sometimes shows a "extra blue bar" that really annoys me.
As you can see in the picture, the timeline bar is at frame 39;05 but because of that extra blue bar, it shows the next frame in the program monitor, or even when i set the out point, the out is after that extra blue bar.
How do I get rid of it, and make the timeline bar normal function again? Tried every Ctrl +/Alt+/Shift+/Ctrl+Alt+/Ctrl+Alt+**** possible combination and couldn't find a solution.
Sorry if that's been answered but didn't know how to search for that issue!

I selected the entire project that was completely rendered and hit render and it did 0 of 2 frames 1 video preview.. then 4 frames 2 video previews up to about 50 previews. Eventually looks like it has rendered. Hit play and the video clips its pausing on are now completely green shots. Not had this on PPro or CC before. I have a Quadro 2000 and usually runs perfectly. In fact there is not chance of it being my card. It's definitely to do with the update.

Similar Messages

Premiere CC 2014, my timeline has drop files 5K

Premiere CC 2014, my timeline has drop files 5K epic native network, and the following error message, A low-level exception occurred in: ImporterMPEG (importer)

Hi Sulafilms,
Try this: Choose Help > Sign Out, restart Premiere Pro, choose Help > Sign In
Thanks,
Kevin

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder

In authorware .avi files are jumping (when paused) to one frame ahead on mouseover.

Dear All,
I had prepared the CBT in a Authorware application (version 7.02) and published it.
The .avi files are playing well in my system (OS=Win XP) and same CBT file in some of the Win XP systems it is not playing well.
i,e. when the movie is playing and I click on the pause button the movie.avi is paused, but the real problem is persisting when I bring my cursor on the different navigation buttons (mouseover) then the movie is jumping to one (1) frame, and if I scroll the text samething is happening the movie is heading forward one frame ahead. But when I click on Play button the movie is playing from the place where it has been paused.
I tried to check in the Virtual Machine and the CBT is working fine, whereas in the upgraded WinXP systems the CBT is giving the problems.
I tried to resolve the problem along with System Administrator (they were saying that the Authorware Software need to give some patch files.)
Please HELP me out with the patch files I need to upload along with the CBT system.
As I tried to copy all the xtra's into the XTRA folder but still the problem persists.
Please let me know what to do.
Thanks and Regards
Ravi Rao G.

There are no patches for Authorware that will change the way video plays. As far as I know there are no patches for Authorware beyond 7.0.2. You have the most current version. You could try renaming the file to .wmv which will change the extension that would be used from a7vfw32.xmo to a7wmp32.xmo. The a7vfw32 is used for avi files but a7wmp32.xmo uses the Windows Media Player in the background to run the file. If this doesn't work are you able to try different movie formats?
HTH,
Mike

How can I move a clip on the timeline less than one frame?

I need to move an audio clip on the timeline to match the video but it snaps one frame at a time and I need to move it less than that.?

I've just had a look.
Try
Edit
Keyboard Shortcuts
Panels
Program Monitor Panel
Program Monitor Panel Menu
You should then find this:
You can then set up your preferred shortcut key.

Premiere Pro CC- Setting Out point sets 5 frames ahead of the cursor?

may have accidentally set Premiere Pro so that every out point I set, it advances 5 frames ahead, making it very frustrating to make cuts at precise points. There is now a dashed orange line next to the cursor.
I can't find the setting to disable this. Any ideas?
Here is an example of what it looks like in the timeline:
[Text formatting corrected. Please type your posts into the forums as copy/paste often leaves unwanted code throughout.]
Message was edited by: Jim Simon

I am using a Mac, and too am having this same issue. It just started earlier today, and after retreacing my steps, cannot figute out what activated this annoying, not to mention ridiculous, 'feature'. Could anyone from Adobe please chime in on how to remove this? Thank You.

Color's timeline is one frame off on occasion

Hi there, odd problem I'm having.
Show shot on RED, cut in Premiere (about 4 mins long), then baked out to ProRes 4444 at its native framerate (23.98), re-cut, then sent to FCP. Now, there were some weird errors there, but I worked around them okay. Made sure the timebase and framerate are 23.98, sent to Color, all seems well, except on occasion the cut is one frame off. The project is also at 23.98 in Color.
Here's the kicker. If I unlock my track and use the Roll tool to fix the annoying error, then sometimes the frame will double up (it will seem like there's the same frame at the end of one clip and at the beginning of the next), or the last frame of the previous clip will become the first frame of the next, creating a different problem and solving nothing.
Ideas on what might be going on?
I'm monitoring through a Matrox MXO2 mini, out from my expresscard slot, if it makes any difference.

I am having the same problem right now with a feature film that is a single baked quicktime (apple pro res HQ 1920 x 1080 23.976 fps) for each scene.
I take the scene and open it in Final Cut Pro, I make the sequence settings automatically fit to the clip.
I cut it up into the seperate shots in the Final Cut timeline. I send to Apple Color.
Then in Apple Color, I see the the edit points are sometimes one frame off (not all of them are off). In all these instances the edit point is rolled one frame forward.
If I color correct and then send back to Final Cut Pro, the new color corrected timeline also is one frame off based on the new footage and xml that came out of Color.
Help!
Using Final Cut Pro 7.0.3
Color 1.5.3
If I look at the format of the original one piece quicktime in Final Cut Pro it says 23.98, and when I open the specific compression setting it states the exact 23.976
In Color it states 23.98 in project settings and if I look at the format of what it is rendering out to Final Cut Pro, it says 24fps. If I open footage rendered in Color (with project settings of 23.98) in quicktime it shows it to be a 24fps clip.
But it is already wrong in the locked timeline of Color. That just after sending from Final Cut Pro. Before any grading, rendering, or sending
That would mean that something is wrong with the xml file Final Cut Pro is sending out.

Premiere Elements 12: Rendering not on the exact frames

I'm using Premiere Elements 12 and cutting MOV files in most cases.
Now I detected that PE isn't rendering always correctly: In some cases the rendered file shows at the end of a clip 1 more frame than in it shows in the cutting window.
Meaning: The original MOV clip contains 2 scenes. I import the MOV file into my PE12 project and put it into the cutting window.
Then I'm moving the viewing bar of the cutting window exactly to the end of scene 1 and click "cut".
When I separate both scenes in the cutting window, PE12 show exactly the result I want to get: scene 1 ends with the last frame of scene 1, scene 2 starts with the first frame of scene 2.
Then I delete scene 2 and render scene 1 to a MP4 file.
When viewing the result file in any player (e.g. Windows Medie Player, VLC, Quicktime), all these players show at the end of scene 1 the first frame of the original scene 2.
Again: even if I couldn't see this first frame of scene 2 in the cutting window!
So the cutting window doesn't show EXACTLY the result I will get!
I already tries different ways of importing the original MOV files, different codecs and so on - nothing helped.
In roughly 50% the cuts of the final file are like planned, the other 50% of cuts show one frame too much at the end of a scene.
Problem: In a lot of cases the scenes are already very short, so I can't give always "one frame plus" before I cut: sometimes I really need every single frame.
And I can't believe that a programm like Premiere Elements should not be able to cut exactly at the frame where it is supposed to!
So does anyone have a clou what I'm doing wrong?
Or this this a knows issue of PE?
Thanks in advance!

Dear ATR,
I now found some time to check this out.
Let me describe exactly what I'm doing:
Source file is a MOV file full HD.
Drag & drop it onto the timeline.
Set half frame option (is it called "field"?) to "reduce flickering" - because if I don't (default option: "none"), the rendered result is not that stable, meaning the picture is totterling a little. Is this normal? Could this setting cause the trouble with the last frame at cutting/rendering?
Switched Timeline to frame display instead of timecode.
By the way: this CTRL + clicking the area above the Timeline doesn't work ...
Moved the Timeline bar with the arrow keys to the position where I want to cut; the Monitor Window above the Timeline showed the first frame of scene 2. Doublechecked by moving the cursor with the arrow keys one frame forward and back again to really got the right position (twice). Clicked "cut" icon on Timeline.
Repeated the same at the end of scene 2 - the Monitor showed the first frame of scene 3.
Moved scene 2 to another position on the Timeline with the mouse (drag & drop).
Checked cuts on the timeline: scene 2 showed the first and last frame as it should.
Repeated all this with 10 scenes from the original MOV file, brought all of them into a new position and thus order.
Deleted the rest of the original MOV file from the timeline.
Put the 10 scenes together, placed them at the left side of the Timeline.
Rendered the result.
Settings: AVCHD - MP4
PAL, 1920 x 1080 px, 30 fps, Widescreen 16:9, Profile: High, Level: 5.0
rendern with max depth: "no"
VBR, 2-path
target: 15 mbps
max: 25 mbps
Audio; AAC, stereo, 48 Khz, Quality: high, 160 kbps
Priority: Bitrate
The result file showes on 4 of 10 scenes that one frame too much at the end of the cut scene.
And it always happens at the same scenes, not randomly!
So it does not depend if I'm viewing frames or timecode in the Timeline. Surprise!
But what I detected: When I'm using a "new project", this issue does not occur!!!
So I looked at the project settings: The "new project" I let the default settings be, because it I should import a file and drag this to the Timeline, the software would give me a message if the project settings should not match.
Default settings are: NTSC-ADCHD-AVCHD 1080p60.
But what I normally do is using a template file with all my intro, outro, audio, logo and so on, copy that *.prel file where I want to edit it, rename it and then open this copied prel file. Here I the project settings show:
HD 1080i, 25 fps, 1920 x 1080 (I guess I once selected this under PAL because there is no PAL 1080p25 oder 30, just 1080p50). And I'm from Germany, so I chose PAL instead of NTSC ...
So I guess this makes a difference - even if I do not have a clue, why.
Big question now: How can I chance my project settings in my template file without making it anew?
Because I cannot copy all the objects from one project to another, right? At least I never managed to do so...
To built the template anew would take about 6 hours, and on this basic template are based 6 more templates for special formats. So makeing all templates anew would cost me up to 2-3 days!!!
So I really hope for a better solution
Kind regards,
Lutz

Date on Call Log one day ahead - How do i fix this...

Hi all,
Hope someone can help.
I look after the company phones and I have been approaced by a couple of users who have had the same problem.
The date that appears in the call log for any call seems to show one day ahead. i.e. calls today appear as 31/05/13.
I have tried the battery / hard reset and then called it and it is still the same.
Look forward to hearing from you.
Kind regards

Heather,
Can you help me figure out why all of your Holiday's are different from your other events?
When/how were these Holiday events entered?
Have you checked iCal>Preferences...>Advanced>Turn on time zone support?

Show multiple frames in a single SWFLoader

Hello,
I am loading a document contained in an .swf file, each page is in a single frame, to an SWFLoader. The SWFLoader shows a single frame at a time.
I would like to show multiple frames at once and be able to manipulate them together (scaling, positioning).
I know how to do it with a single frame easily, but is it possible with 2 or more frames?
Thank you in advance,
Mr Cartman.

A SWF can only show one frame at a time.

Premiere Pro: Not Playing Timeline, Not Rendering Full Sequence, Stalling on One Frame

2013 iMac // 10.9.3 // Premiere Pro CC 2014 (latest update)
I have been editing a project for a few days, and it just started giving me issues on my last run through it before exporting.
I have dealt with many problems with PP before, but I honestly don't even know what's going wrong here. I cannot pinpoint the issue. It seems to be a number of things. I started by updating PP and CUDA. Nothing. So I continued.
1) I was having problems rendering, so I figured I'd delete the preview files and start from scratch. When rendering the entire project, it would get to about 60%, then stop and hang there. After five minutes of watching it, I would quit PP. Even though it would look like it had quit, it would still be running in Activity Monitor and the little light underneath it in the dock would be on, so I have to force quit.
2) It was odd because the spot where it stops rendering is the sport where, if I scroll through the timeline, the Program window will freeze on one frame. Then it doesn't matter how much I move the playhead, it won't show any other frames. Nor will the sequence play at all after this. So I'd quit again.
3) I went back to another project and rendered everything in it - fine and dandy.
Why is this giving me such a problem? If anyone needs anything else from me to properly diagnose this, please just say so! Thanks for the help.

Sorry 'bout the time lag. Our new firm just started its first large project, and as the tech geek for the photo-part of it, been kinda busy.
So there's clearly a problem with the project file having gotten corrupted, but ... when it hits the footage it choked on before, it choked again. There's some kind of glitch here that has to to with PrPro interacting with those files. I'm wondering if a file header somewhere has a digit that can confuse PrPro or something? I do recall a couple issues of a similar nature that eventually involved people sending a bit of the nasty footage to an Adobe staffer, who poked through behind the scenes and found something that was not exactly what it might best have been in a header or something. Altered that, PrPro & footage liked each other again, everybody else happy. But that's the sort of ish that one needs experience at ... and I've got none.
There's been times also where people have split a project up ... right on the edge of the Problem. Three parts to their project, in separate project files. First "good" part, and rendered it out as a separate project. Next project, the "troubled" footage that worked by itself, as again its own project, and rendered out. Then the final & also untroubled part, again rendered out. I've heard of both taking those into QuicktimePro (if appropriate codec) and uniting in one continuous piece, I've also heard of people who took three PrPro projects that had been rendered out separately (if I recall one was probably about six parts, a long & complex bugger) and brought those rendered-out parts back in to make a final project with everything in it. In fact, there are a number of people who split their larger projects into chunks, that are finished separately, then combined in a final PrPro project for final polishing as their normal work habit.
Best wishes ...

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip nmed 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved th

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

If for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar. My question is, I do not have this option. How do I get the sync to stop

"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please.

"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please.

My iPhone 5 connects to wifi but shows one bar on the wifi signal meter but my iPad2 and Macbook Air both show full wifi bars when all three are side by side next to my apple router. Do I have an antenna problem with my iPhone 5?

It appears that my iPhone 5 has a wifi signal reception issue. I only show one bar on the wifi signal meter even when I an next to the router. Both my Macbook Air and my iPad2 show full wifi signals at the same time. Rebooting the Apple router and each device results in the same meter readings.

Does this occur with any Wi-Fi connection? Or only a specific one?
If it occurs with any Wi-Fi connection, take it to Apple.
If it is only occurring with a specific Wi-Fi connection, it is an issue with that Wi-Fi connection.
Try the following, it may help:
Settings > General > Reset > Reset Network Settings.
Forget the Wi-Fi connection on the iPhone then reconnect.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).

Why does 60 fps (59.94) footage play back as 30fps on a 60fps timeline in Premiere CC 2014 (Win 8.1)?

I have a 2nd computer (Win 8.0) with Premiere CS6 installed that doesn't do this, meaning 60fps footage plays back on a 60fps timeline. On my primary computer (Premiere CC 2014), 60fps footage that plays back on a 60fps timeline doubles up on every even frame while dropping every odd frame. Does anyone know why this is happening? Thanks, Grant

Cancel that, my source footage shutter speed was 1/30th instead of 1/60th, no wonder!

Premiere CC 2014's timeline bar showing one frame ahead

Similar Messages

Maybe you are looking for