Premiere CC 7.2.1 - Crashes during timeline Render

Hi All.
I am running a MacPro5,1 OSX 10.7.5 and Premiere CC 7.2.1. Ever since updating the software I have experience crash on timeline renders and very slow running. There's also a strange thing happening on the odd occassion of, once the render is completed (visibly on the timeline) the render box continues to create new previews and renders. I left it going once and it went into the tens of thousands.... The footage I am Editing is Time Lapse renders in Prores HQ 422 mix with 5D mk 2 footage.
I have also downloaded and update the CC update for 7.2.1 about 4 times now and each time I restart my computer the CC app says I need to upgrade again. Premiere CC however says it is updated and states so on the information window.
I also have an issue with my effects rendering not reloading properly when I start up Premiere CC. Even though I save all the time, my scratch disks are set and the cache seems to be working fine, no joy in saving renders.
Can any help?
Thanks Scott
[Text formatting corrected.]
Message was edited by: Jim Simon

Type Crash on Launch into the forums search. You'll get hits.

Similar Messages

Crashing during video render

HI, I have a late 2012 MBP running OSX 10.9 Mavericks with a 16gb RAM upgrade that I use as my primary work computer for video editing. I've been working in premiere pro cs6 with minimal issues for going on 2 years up until recently.
Whenever I render this video file, my graphics freeze up and the computer restarts itself. Just before it gets to the login screen it says "Your computer was restarted. because of an issue". What's going on??? I've had this problem a lot recently, and often multiple times a day!
Thanks,
Bear

The OS at the bottom is incorrect. I'm running 10.6.8. I've tried to duplicate the problem since your last post and haven't noticed anything with activity monitor. Just backed up everything.......
On a side note, the itunes library xml was apparently corrupted. I'm a bit confused. It attempted to read/reimport my library information and was able to recall/recognize previous playlists and my entire library including videos/podcasts. But I have NO recovery of iphone backups. Why? I tried to restore my iPhone and it defaulted to factory settings without giving the option of choosing a backup, like it thought it was the first time iTunes saw the phone. How do I go about finding the backups? Are they gone with the corrupted library file. I've never had so much trouble with a mac before.....

AE cs6 crash during render preview

AE is crashing during a render preview.
Version: cs6 11.0.4 (recently updated).
System: iMac mid 2011 running os X 10.7.5
Processor: 2.7 GHz Intel Core i5
Memory: 16 gb 1333 MHz RAM
Error message: "Last log message was: <4453353824> <ae.blitpipe> <2> Making New Context."
In my comp I am using four masked solid layers with keyframes, no 3D or 3rd party plugins. The crash occurred after adding an adjustment layer and applying Turbulent Displace with an expression and Simple Choker. Crash occurs at the same point in the timeline every time I do a render preview. I've tried purging the cache, rebooting everything. I tried clearing the preferences with the command "command option shift" at startup, but that didn't seem to work (got no pop up window with yes/no option, maybe not doing it right?). Please let me know if you have any advice or need more information to clarify the issue. Thanks.

The problem is in Mask 1 on the Head layer. Delete and redraw/re-animate that mask.
Or, better...
Why are you drawing masks on solid layers for animation? That stopped being the right way to create graphics in After Effects seven years ago, when we introduced shape layers. I strongly recommend using shape layers for the kind of work that you're doing here. Also, I just checked, and copying and pasting your mask paths into shape layers path makes the problem go away, so whatever bug there is there is just with masks on solids.
To learn shape layers, go through Andrew Devis's materials in this series:
After Effects basics tutorials by Andrew Devis

FCP Crashing During Rendering

FCP 5.0.4 keeps crashing during the render process. Can someone decipher the code below? I don't want to re-install unless I have to.
Date/Time: 2006-01-18 21:43:02.884 -0700
OS Version: 10.4.4 (Build 8G32)
Report Version: 3
Command: Final Cut Pro
Path: /Applications/Final Cut
Pro.app/Contents/MacOS/Final Cut Pro
Parent: WindowServer [133]
Version: 5.0.4 (5.0.4)
Build Version: 2
Project Name: FCPApp
Source Version: 512141418
PID: 375
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at
0x00000000
Thread 0 Crashed:
0 <<00000000>> 0x00000000 0 + 0
1 <Unknown disk fragment> 0x080dc380
GetFrame__FPPvl + 912
2 <Unknown disk fragment> 0x080db7b0
Render_FP9PF_InDataP10PF_OutDataPP11PF_ParamDefP11PFLayerDef
+ 240
3 <Unknown disk fragment> 0x080dab8c main +
300
4 ...CutPro.Plugins.AfterEffects 0x01aba3d8
CALLPLUG_INPROC + 184
5 ...CutPro.Plugins.AfterEffects 0x01ac3dfc
AEFXRenderFrameRequest(tagAEFXStateMachine*) + 168
6 ...CutPro.Plugins.AfterEffects 0x01ac4720
ProcessAEFXStateRequest + 1488
7 ...CutPro.Plugins.AfterEffects 0x01adcb44
PluginMainEntry(long, long, KGDictInt*, void*) + 2216

Sounds like you need to Repair Permissions using the disk utility.
That and maybe trashing your preferences:
http://www.pistolerapost2.com/fcprescue
Shane

IDVD Crash during render process

Hello, first I want to say that I did several searches on this forum to find a fix against this bug and nothing that I tried fixed the crashing problem.
*What I have*: Mac Pro 2 x 3GHz Dual-Core Intel Xeon, 4 Go DDR2 RAM, Leopard 10.5.2, ILife'08 and Time Machine active (and a Logitech mouse *smile*) .
Problem: IDVD crashes during the render process everytime with all kind themes and any kind of video type file.
Note: It's been about a month that I am still trying different approaches (i.e.: delete library files, reinstall ILife, reinstall leopard AND ILife, reinstall ILife without IPhoto... you get the picture) and nothing worked so far.
*So my question is*: Is IDVD'08 compatible with Leopard at all or should I wait for the next release?
Thank you,

I can't answer your question about Leopard and iDvd '08 since I'm still running with Tiger X.4.11
But after reading your post I'm concerned that you may not be deleting apps correctly. So my suggestion is to try again to reinstall the app. But use this utility before doing so:
http://www.apple.com/downloads/macosx/systemdiskutilities/appdelete.html
Thereafter run apple's software updater within system pref's to make sure you have the most current versions on your mac. Always a good idea to run apple's disc utility as well before and after updating. Make sure to disconnect all external FW and USB2 devices (except your keyboard and mouse) when trying idvd for the first time after installing an update.
Hope this helps but if not just come on back. Good luck.

Premiere Elements 11 crashes during playback after adding PiP

I have Adobe Premiere Elements 11, up to date, and Windows 7 home up to date. This is a new problem that just started with my most recent project. I have done these types of edits and PiP's many times with success with the same type of source video formats, etc.
The problem: I add a small clip of video over the main video timeline as Picture in Picture. It adds to the timeline successfully and I can even play it back ok (before rendering). If I add a transition to the front of the PiP, it will crash during playback (pre-render). Or, if I render the timeline before adding the transition, it will also crash during playback once it gets to the PiP.
I tested PiP with still pictures and that works ok, it only crashes on video PiP. I have tested different video formats (from GoPro and from Panasonic camcorder) with the same results (crashes). I have uninstalled Adobe Premiere as well as Quicktime and re-installed them, same results. I am quite frustrated with the constant crashes, especially since I have done a dozen or more videos the same exact way using the same cameras and same types of video files.
Any help is appreciated.
Justin

So I created a new project using the project preset "DSLR 1080p30 @29.97". Everything worked fine in that project using the same source videos and doing PiP (tested with both methods).
I opened the project that was giving me problems and the PiP worked when using your approach of dropping the PiP clip onto Video 2 then scaling it down. I then deleted that PiP and re-added it the way I was doing it before, and it crashed the first time I tried to play it back.
I closed down Elements and again tried to reproduce the crash the same way, but this time it worked and did not crash...I tried multiple times to reproduce the crash, sometimes it would, sometimes it wouldn't...
So, I don't know exactly what the problem is. Lastnight I could reproduce the crash every time by either rendering the PiP or adding a transition to the front of it (then playing it back), every time it would crash. Now it is behaving differently.
At any rate, I will start using the correct project settings going forward and know that I can PiP using the other method as well. Maybe the project that is giving me problems is just corrupted or something, I'll toss it an start anew.

GoPro Cineform files cause Premiere to crash during Media Export

I first noticed this problem when using a project that had been copied and transcoded with GoPro codec as demonstrated in Dave Henly's helpful video. The codec is indeed beautiful.
However, 50% to 80% of the time when trying to export a project where there are GoPro files on the timeline, it'll get about halfway through the export before Premiere (or Media Encoder) simply freezes up.
I didn't know what was causing this problem until I was using one large GoPro-exported video as the new base layer for a project that had otherwise been working perfectly prior to that (using Canon 60D-created .mov files). Now it was crashing during every export. On a hunch, I re-exported that base layer as an h264 file and replaced the GoPro video on the timeline, and now the project exports out just fine.
Is this happening to anyone else? I'm using just the standard 8bit GoPro preset whenever I export out or transcode clips.
I'm using Premiere Pro CC, whatever the up-to-date version number is right now.
Windows 8.
24 gb RAM.
GeForce Titan Black
Intel Core i7

Similar problem.
The new feature rendering a ae comp inside premiere timeline is perfect, but using gopro cineform codec crashes premiere on export.

Premiere Pro CC 2014 Crashes During Media Export

Hi, I have diligently applied several of the fixes listed here:
Re: Premiere Pro CC 2014 freezes frequently and crashes
However, Premiere Pro CC crashes at about 10% of the video export -- it gets through the audio stuff as far as i can see.

yeah, checked out the article.
my computer is not shutting down. premiere is crashing. the media exporter is crashing.
it gets through the audio then it crashes during the video processing.
i even tried to hit pause every 2 seconds.
a test exports fine from premiere 6.0, but i am concerned that 6.0 might crash if i rebuild the whole project.
hmm i have an idea.
obviously i would much rather the software worked.

Premiere Pro CC(V.8.0) sluggish and crashes during Playback

Issue:
Premiere Pro CC(V.8.0) extremely sluggish and crashes during Playback. My video won't play at all unless I render (which is no problem). I render all my clips and attempt to play it back. It usually will allow me to watch it the first time around. After that, the program freezes up or becomes extremely sluggish. I have even had a blank green screen pop up on my playback monitor. Sometimes the program will generate the message "A Serious Error has occurred" and will shut down. Other times, the program just locks up. I am not running any other programs except email.
Here is what I've tried:
Cleared all my cache files
Set my Mercury Playback set to "Software only"
Restarted the program and computer after doing the above.
Made sure I had no RGB Curves as an effect (as I did see that was an issue from other threads)
Deleted all unused footage
Deleted all render files and re-rendered everything.
I am editing footage that requires Ultra Key. I am using a Three-Way Color Corrector. My video isn't even 1 minute long, so I would think it would be easy to render and playback.
Here is what I am working on (I know I need an upgrade - was hoping to after I finished this client's project):
Macbook Pro 2008
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 667 MHz DDR2 SDRAM
Graphics NVIDIA GeForce 8600M GT 256 MB
Software OS X 10.9.3
HELP! This is seriously slowing my workflow and my project is due tomorrow. Any advice would be appreciated.

I am Windows but I have some saved Mac links that may help
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Premiere Pro CS6 Crashing during color correction

Adobe Premiere pro crashing during color correcting on both new macbook pros with osx 10.8.2. Clips coming off new G Raid drive with thunderbolt. Clips shot on canon mark III. Help.

Hold option down while launching to reset prefs.
Start or open another project with different media. If everything OK, that makes it look like your project or media are corrupt. Start new project with same media. If OK, then your previous project could have been corrupt. And so on.
Deleting your media cache can also banish some crashing.

Premiere Elements 12 crashes during video editor launch

I have tried installing this as a trial and as a licensed version, both from a DVD and from the desktop. I get the following crash during startup of the video editor:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Elements.exe
Application Version: 12.0.0.0
Application Timestamp: 523cd4d5
Fault Module Name: dvacore.dll
Fault Module Version: 11.0.0.0
Fault Module Timestamp: 523cc5bf
Exception Code: c00000fd
Exception Offset: 00000000000698b6
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: fac2
Additional Information 2: fac2a5e0455ddc953003a7d6737e6f56
Additional Information 3: 849e
Additional Information 4: 849e9f8e49e92f5a6249cde48a76ced7
I have done the following to try to fix this issue:
Uninstalled and reinstalled Premiere Elements as noted above, along with deleting existing files.
Uninstalled/reinstalled Quicktime.
Updated all Windows Drivers.
Updated Video and Sound drivers.
Disk Cleanup
Disk Defragmenter

SDLeMire
Have you made any attempt to contact Adobe via its Adobe Chat to try to resolve this issue? To do so, please click on the following link
Contact Customer Care
set for
Premiere Elements
Adobe ID and Signing In
Adobe ID, sign in, and account help
Chat Panel
at this moment there is an active Chat Panel at the end of the path. If the web page set does not hold, then you will have to navigate to Chat Panel using the above titles as guides. Adobe Chat might offer you the opportunity for remote control of your computer for troubleshooting whereas we cannot at this user to user level. The above does not prohibit you from troubleshooting here as well.
Please try the SLCache renaming as detailed in the following
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
The error profile with dvacore.dll has been frequently seen in these forums for many versions of Premiere Elements.
Fixes have included creating a new User Account with Administrative Privileges and installing and running Premiere Elements in it.
In another instance the problem was reported to be due to share with a file server. And, so on.
Please review the above and then we can decide what next.
Thank you.
ATR

Why is Premiere Pro crashing during a media render?

I have a pretty straightforward project consisting of still photos, some video clips and an audio narration track. It is 55:28:38 long. When I try to export the media, during the render it gets about 28% of the way through and then I get a message that Premiere Pro has stopped working. Any ideas of where I begin to trouble shoot?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
http://blogs.adobe.com/kevinmonahan/2014/01/13/computer-shuts-down-with-premiere-pro-or-af ter-effects/

Premire Pro CC 2014 and Media Encoder Crash During Launch

Premire Pro and Media Encoder crash during startup and are unusable. I am using Windows 7 Ultimate and already tried reinstalling Adobe Creative Cloud from scratch and it's still happening. I also tried following Adobes KB articles directions to rename the Adobe folder in my documents and appdata to no avail. When I try to launch either application, I get a generic windows crash message "Adobe Premire Pro CC 2014.0 has stopped working" and when I click problem details, it lists this:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 8.0.0.169
Application Timestamp: 536f4f89
Fault Module Name: ImageRenderer.dll
Fault Module Version: 8.0.0.169
Fault Module Timestamp: 536f2c18
Exception Code: c000001d
Exception Offset: 00000000001f5382
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0b2d
Additional Information 2: 0b2df4702c3fc6489bf922fb8e966350
Additional Information 3: fa9f
Additional Information 4: fa9f59f642d335ee71c6667e52000d39

I am having a similar problem.
Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
My timeline is 2K, 58 minutes in 23.976
Only effects applied are Lumetri LUTs - no third party.
I've exported as recently as a week ago without issue.
Running OSX 9.5 on an X99 board
3.75 GHz 8-core
64GB 2400 MHz RAM
EVGA Titan Black 6GB
Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
Thanks Adobe, for checking this out.

Premiere Pro and Media Encoder crash while rendering H.264

Very recently, a problem's popped up where Premiere Pro and Media Encoder (CC) will crash while rendering H.264.
It's only while rendering H.264 - other formats seem to work fine.
And I don't mean that it returns an error, I mean it hard crashes with a Windows "Adobe Premiere Pro CC has stopped working" popup.
It doesn't crash at a consistent time during the render, even on the same project. Occasionally, it won't crash at all, but this is usually not the case.
I've tried disabling CUDA and my overclock to no avail. Please help!

On the topic of opening a project on the exact same version of Premiere Pro CC 2014 (yes it is definitely up to date, and the 2014 version), to overcome this export crash problem that ZachHinchy has brought up - you can't. Technically speaking, one should easily be able to open a Premiere Pro CC 2014 project from one system on another system running the exact same up to date, legitimate version of Premiere Pro CC 2014 without any kind of error. But for some reason, this has been disallowed(?) by Adobe. It has facepalm written all over it. Does anyone agree that this is at least a little bit silly?
I have tried exporting a Final Cut Pro XML from my project to try and open the sequence at uni on a Mac, so I can render my project when I finish my edit. It half works - the clips are there, but the sequence is gone - i.e. 12 hours of painstaking sequencing and micro-edits that had me at several points in time wanting to insert my hand through my monitor with enough force to make a large hole. I really cannot afford redo this sequence, as my assignment is due tomorrow, and I have to work at 6 oclock in the morning, so I also cannot afford to stay up till the early hours of tomorrow morning. Wish me luck that some miraculous event has taken place overnight that will somehow allow me to just open my project, on the same version of Premiere, on a Mac, without hassle. (Apple OS is not friendly to anything but its own selfish nature, so I am having doubts).
Adobe please, if you can do anything at all to help, you will save my assignment, and my faith will be restored. Otherwise, I'll just get my money back and buy Final Cut instead.
I cant even
If I find a way to fix either of these problems, I will post straight away.

Crash during cmd-scrub of playhead.

Has anyone else had problems with After Effects crashing during a cmd-scrub of the playhead in the timeline? Always happens when I switch back to the app from another running program (Spotify in the last instance), and the first action is to hold cmd and scrub the playhead (useful tip for scrubbing with audio), its infuriating.
Im running:
AE CS5 (10.0.2)
Mac OSX 10.6.8
2.66ghz Quad core Xeon
12 gig Ram
NVIDIA GeForce GT 120
Cheers!
Jamie

Anything fancy going on with audio like a specific device or Quicktime component being installed? External audio decoder via Firewire or soem such thing? I'd check those things as well as the audio prefs in AE. Could be that it's simply latching on to the wrong audio device and then goes kaboom when anotehr app is taking it over...
Mylenium

Premiere CC 7.2.1 - Crashes during timeline Render

Similar Messages

Maybe you are looking for