Premiere CC fatal error when lunch the program

Hi,
i have dowload and installed premiere cc trial version,
but when i lunch the program i look this error. what do you do? tanks
Nome evento problema:    APPCRASH
Nome applicazione:    Adobe Premiere Pro.exe
Versione applicazione:    7.2.2.33
Timestamp applicazione:    532c3999
Nome modulo con errori:    ImageRenderer.dll
Versione modulo con errori:    7.2.2.33
Timestamp modulo con errori:    532beda1
Codice eccezione:    c000001d
Offset eccezione:    00000000001e21a2
Versione SO:    6.1.7600.2.0.0.256.48
ID impostazioni locali:    1040
Informazioni aggiuntive 1:    0b2d
Ulteriori informazioni 2:    0b2df4702c3fc6489bf922fb8e966350
Ulteriori informazioni 3:    42f6
Ulteriori informazioni 4:    42f6169e7c419fdeb216f9c040200376

>ImageRenderer.dll
That MAY mean a problem with your graphics adapter driver
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have a computer with TWO graphics adapters?

Similar Messages

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Known Issue: Fatal error when installing the Windows emulators: 2147023293 (Windows 10 Insider Preview SDK and tools, April 2015 release)

When installing the Windows 10 emulators, you may receive the following error:
Error: Emulators for Windows Mobile 10.0.10069 : The installer failed. Fatal error during installation. Error code: -2147023293

To resolve this issue, run Visual Studio setup again to add the emulators. To do this
Reboot your computer
Open Control Panel, and select Programs and Features.
Select Microsoft Visual Studio 2015 RC, click Change, and then click
Modify.
Select the feature “Emulators for Windows 10 Mobile”, and click Update.

Error when executing the program RBDMIDOC with Message type HRMD_ABA

Hello All
I finished the integration between CRM and HR
Now I am able to replicate the employees and the organizations, but when I created a schedule job for the program RBDMIDOC and message type HRMD_ABA the system gives me warning and message: no data selected for distribution even if I try to run the program using SE38 I am getting the same error message
I already activated the message type using BD50 and activated the Change pointers using BD61
Regards
Jacopo Fransoice

us the program
RHALEINI

ReplaceAll() error when run the program

Hi everyone, I am developing an application to replace one string by another string with the method replaceAll() or replaceFirst() on NWDS v2.0.14.
I have changed the Java Build Path from jdk1.3 to j2sdk 1.4.2_10 in order to make those two methods available.
There is no problem in build and deployment. But when execute this application I get an error telling there is no such method. When I comment out the line with the method in the code I can run this application without any error. I am sure the error is caused by the method.
Can you tell me how to fix this problem? Should jdk of Java engine on server be upgraded?
Any hint will be appreciated.
Kind regards.
Wang

As you use NWDS 2.0.14 I guess you also run SP14 of your engine, so your engine should already run on top of JDK 1.4.
You can add a line like this to your code to verify it:
System.getProperty("java.version")
Regards,
Dieter

Why the Fatal Error when trying to preview or edit audio in Cp 8?

I installed Cp 8 last week. (Been using Cp 3 for years, finally made the leap). Made a presentation on Cp 8 just fine -- everything worked wonderfully. Preview ... audio edits ... everything was fine.
This week I'm working on another presentation and suddenly the program goes into a fatal error EVERY TIME I try to preview it.
So --- I continued creating my presentation without previewing anything, and then recorded audio for the project. But when I went to edit the audio, BAM - another fatal error.
This is not good. :-)
Anyone else have this problem? Any known solutions?

Sorry -- not much geek in my blood, so I forget to provide that info. :-)
OS: Win 7
The program is installed on my desktop, and there is no network. It's only my computer.
Yes, there is PLENTY of space.
I downloaded the program last week with the help of Adobe Tech support, because the program would not install. An error kept appearing saying it was missing a file. Spent 7 hours on Christmas Eve working with tech support in New Delhi, 1.5 hours of which was on the phone with the tech support having remote control of my computer. We finally figured out that AVG was preventing the install, so we deactivated AVG and then the program installed just fine.
As I said, I've been using Cp 3 for YEARS, so I'm familiar with what Cp is capable of doing. I created a project two days after Christmas and everything worked just find. Was able to preview anytime I wanted, and had no problem editing my audio.
Then without making any other changes to my computer's configuration, two days ago I was working on another presentation and went to preview the slide. The program reached 58% and then gave a fatal error, forcing shutdown. I thought I might be a hiccup, so I closed everything down and rebooted the computer, but still the same problem every time I tried to preview. I had half a dozen attempts, and each time a fatal error, always at the place where it says 58% complete (for the preview).
So --- I went ahead and completed the slide layouts without previewing anything, and figured I would add the audio, edit it, and publish the presentation. I recorded the audio (my voice) just fine, but when I tried to edit it (audio > edit > project), the system experienced a fatal error, again at the 58% mark of preparation.
My presentations are saved and backed up ... I've been thinking that I need to uninstall / reinstall the program, but after spending 7 hours doing that on Christmas Eve, I was hoping there might be an alternative solution.

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

When opening the program LR 5 encounters an error when reading from it's preview cache.

When opening the program LR 5 encounters an error when reading from it's preview cache. It says it will correct the problem when it re opens. Why does this happen and how do I correct it?

It means there is an issue with the preview cache.
If it persists after closing and re-opening Lightroom then you will need to delete the preview folder.
There is no permanent harm and Lightroom will regenerate the previews on an asneeded basis or the whole image collection if you ask it.
The previews folder exists in the Lightroom folder and has the name "Your catalog name PREVIEW.LRDATA".
Make sure it is the the correct folder before deleting it.
Tony Jay

Error when generating the update program::::ID RSAU No. 484****

Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
     An error occurred during program generation for InfoSource
     2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
     incorrect update rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
amit shetye

hi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep

Error when exporting ABAP Programs and the Project

Hi All,
I keep on getting the following errors when I'm exporting the entire Project or only ABAP Programs (see attached screenshots).
- Screenshot 1 shows an error when exporting a Project.
- Screenshot 2 shows an error when exporting ABAP Program(s).
These errors occur in the DEV environment.
Please help.
Thank you all.
Kind regards,
Roli

Hi Ramakrishna,
I will send the log file for when exporting a project. However, the issue of exporting ABAP Programs is nor resolved.
In CMC we had to configure the system to Generate ABAP = True.
Thank you.
Kind regards,
Roli

Hello adobe muse when opening the program after entering my account information it says an unexpected error has occurred, what should I do

hello adobe muse when opening the program after entering my account information it says an unexpected error has occurred, what should I do

Hi
This looks an older version of Adobe Muse, Please try the steps given in this article
An unexpected error occurred I -200

Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

Premiere Pro crashes when opening the program. what to do

Premiere Pro crashes every time when opening the program. Other creative cloud programs are functioning well. What to do?

You may get more specific help in that forum http://forums.adobe.com/community/premiere
When you go there, you need to provide a LOT more information for anyone to help
-PPro Information FAQ http://forums.adobe.com/message/4200840
Also, Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
crash on launch
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Premiere CC fatal error when lunch the program

Similar Messages

Maybe you are looking for