Premiere CC - Graphical Glitches after using Plural Eyes - Please advise!

Just ran a bunch of clips through Plural Eyes and Now I have this extremely annoying graphical error where it creates red lines over the clips and the white bars (sometimes are black). None of this will go away and I'm not sure what's going on at all.
Any advice greatly appreciated, as we need to resolve this ASAP! Thank you!

To elaborate, when I scrub through the timeline wherever the red cursor was, it leaves a line over that section, it also deteriorates the top clips for some reason. This is really frustrating! Someone have advice please?!
I'd also like to add that my UNSYNC'D clips work fine. It's only these sync'd clips that are having this trouble.

Similar Messages

  • HT1386 I am setting up my daughter's 4th generation iTouch to replace her old one. Our family shares an iTunes account because my daughters are young. Does she have to have her own iTunes account in order to use FaceTime? Please advise best route at set u

    I am setting up my daughter's 4th generation iTouch to replace her old one. Our family shares an iTunes account because my daughters are young. Does she have to have her own iTunes account in order to use FaceTime? Please advise best route at set up.

    She would need her own Apple ID, though not an iTunes Store account per se. This article will probably be of help:
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-facetim e-set-up-use-and-troubleshooting-problems/
    Regards.

  • Firefox won't print with my new HP P1102W printer. The printer will print if I use IE8. Please advise settings tomake firefox print with my new printer

    firefox 3.6.12 won't print with my new HP P1102W laser printer. The printer will print if I use IE8. Please advise settings tomake firefox print with my new printer . I spoke with HP tech support. We reinstalled all drivers. They adamantly say it is a Firefox issue and you should have some modifications for it.
    When I try to print from the internet using Firefox, a dialog box pops up which says "preparing to print." However, it hangs and I have to manually shut it down. Doing this terminates the Firefox session, and it will not restore upon restart. This printer will print files on my hard drive, and if I use IE8, which I do not want.
    Thanks

    It must be a Firefox problem, since it works perfectly in Chrome.

  • I received an email from Icloud support that I used 4.8gb of storage out of 5.0 available. When I check on systems preferences, i show only using 228mbs. Please advise?

    I received an email from Icloud support that I used 4.8gb of storage out of 5.0 available. When I check on systems preferences, i show only using 228mbs. Please advise?

    The message probably was sent by mistake. Ignore it, unless you have problems with the iCloud email address

  • How do I perform a multicam edit in PPro CS6 using Plural Eyes?

    So I'm new to multicam editing in CS6. I've recently upgraded from CS3 (yeah, it's been awhile). I'm editing a wedding on a Windows 7 machine with mostly DSLR's (start and stop clips). My workflow was going to be to sync through Plural Eyes and then all the clips would be synced on the timeline and I could create a multicam sequence from there. But apparently, you can't do that like you could in CS3. It seems that multicam was easier to do in CS3 almost. Has anyone been able to sync multiple DSLR clips on the timeline and use the multicam feature? I would love to be able to do this but not sure how to go about it or if it's even possible. Thanks for any of your help!

    CS6 does add an additional method of creating a multicam sequence, but the old method there from the beginning still works just fine.

  • Macbook pro (2010) having graphical glitches after Mavericks update

    What is your take?
    graphical glitches appear and disappear randomly. Didn't have them before Mavericks update!
    Thanks a lot for the help

    15” MBP Mid 2010 models have been recalled for GPU issues.  See https://discussions.apple.com/docs/DOC-5681.
    Official Apple statement: http://support.apple.com/kb/TS4088
    Print out a copy of your kernel panic and a copy of this Knowledge Base article and go to an Apple store or Apple Authorizes Service Provider with your machine and the documentation.
    Genius reservation http://www.apple.com/retail/geniusbar/ .
    or find an Apple Authorized Service Provider https://locate.apple.com/country
    If it has been three years since your date of purchase then you are past the date covered by the recall but sometimes they honor it anyway.
    More on this from another thread:  https://discussions.apple.com/thread/5763560?tstart=0

  • JavaScript won't recognize applet after using HTML Converter (please help)

    Hello friends,
    I used JavaScript to call a public method from my swing applet, which returned a string. It functioned correctly until I used the HTML Converter (a utility available from this web site, which converts the <applet> tag into <object>). Now it doesn't recognize the applet.
    Here's the JavaSript code:
    function getText(field) {
    field.value = Editor.getText(); // worked fine before converting
    // "Editor" is the name of the applet, used in the applet/object tags
    Here's the applet method:
    public String getText() {
    return "whatever";
    Now JavaScript sends an error "'Editor' is undefined"
    Any tips will be greatly appreciated. Thank you!

    Yes, the applet loads. Here's the address: (the applet is not finished, but it functions correctly)
    http://www.lordofthewebs.com/test/test1.asp - before using the converter
    http://www.lordofthewebs.com/test/test2.asp - after using the converter
    The "getText()" menthod works in IE 6.0, doesn't work in netscape (I haven't gotten to this issue yet).

  • Graphical glitches after installing mavericks

    I have a MBA 2012
    After I´ve installed Mav I get random glitches with the graphics. I have re-booted several times. I occurs both in dual screen use as normal laptop use. Sometimes its only in the dock but some times all over the screen as in the attached picture... Is there any solution or fix? Does anyone else have the same issue?

    This is what I am geting alot of after installing Maverick.  Very annoying have to reboot to get rid of it.

  • OpenGL graphic flash after using side volume buttons

    I'm working on an OpenGL game based on the Crashlanding framework in Apple's code examples. I'm experiencing a one frame flash if you use the side volume controls during the game and Apple's graphic feedback overlays on top of the game view. Everything is fine when the overlay is up and begins to fade out but for 1/30th of a second after the fadeout concludes the screen appears to flash black. After further review what is happening is that the underlying game image is being cropped by the bounding rectangle of the OS-generated volume overlay. Anybody have a clue what is causing this and what I can do to prevent it?
    Any help would be appreciated.
    Thanks
    GK

    There's a few other posts like this floating around and none of them have any solutions other than it seems to happen on all phones and is a software problem. You can check them out here to see if anyone finds any solutions:
    https://discussions.apple.com/message/16632933#16632933
    https://discussions.apple.com/message/16538123#16538123
    https://discussions.apple.com/message/16381522#16381522

  • IPhoto hangs after using Red Eye tool

    when I go into edit mode on an image, then use the Red Eye tool, then click Done, my iPhoto just hangs there with the pinwheel turning. other edits seem to work fine when do them and hit Done, but red eye always seems to cause a freeze. does anyone have any ideas? thanks in advance!

    Julia
    What it means is that something in your library is at fault...
    So, let's move the pics across to the new library...
    Download iPhoto Library Manager and use it to move the albums and events across.
    After you move a bunch of events, make sure that the red-eye is still working. If you find that after a while it stops working, then we'll be a lot closer to narrowing down the culprit.
    Regards
    TD

  • Graphics glitches when using firefox in win7

    Hello, I use intel's motherboard dg965wh with the generic graphics accelerator (onboard). when using firefox i get a lot of glithces on screen, which never happened with other programs. What seems to be the problem ?

    Thanks, iamjayakumars. It was clearly something in one particular user account on the computer (there are several, and only one user seemed to have the problem). Since it's a new computer, I just wiped that user from Windows 8 and started from scratch. Problem seems to be solved. So, as your help file suggests, there probably was something in that user profile's setting folder causing issues, and a clean start as a new user (hopefully) resolved it.

  • Graphic glitch after installing latest "Graphic fix update for 10.6".

    Hello.
    After I installed the graphic fix on my Macbook (Nvidia 9400M), when I switch any game to window mode the graphic completely stop working (the window stays black or there is stationary picture). It's like that in all games, didn't have time to check other situations, but it's like that since I installed the graphic fix (I guess new drivers for the card). The sound still works. And if I switch games back to full screen, all is fine. It just affects the window mode.
    It's a known bug which came with the update or should I reinstall driver or worse OS X?
    Thank you.

    You might want to check over in the MacBook Pro forums.

  • Graphical glitch when using textinput on iPad

    I've got a strange problem when using textinput on the iPad. When you select a textinput the iOS keyboard will be shown so you can enter text, so far so good, but if the textinput component is located in the area where the keyboard is the screen should be moved upwards so you still can see the textinput when typing. But instead a black area (with the same dimensions as the screen that should be moved) will slide from the top and thus covering a large portion of the screen. So basically I see the keyboard and a lot of black, and then I have to make sure I don't type anything wrong.
    Anyone else encountered this?

    Hi Spog,
    I did encounter this.
    I noticed that if I had "auto-orient" set to true in my settings, I would get the black screen weirdness when my iPad was turned one direction.  Turn it 180 degrees in the opposite direction and everything was fine.
    One thing you could try is locking the orientation and seeing if that helps.  It might not be ideal, but may be better than having the weirdness in your application.
    Luckily, the input textfield placement I needed was arbitrary so I placed it in the middle and have no issues.
    Good Luck,
    Mr. 12

  • Video footage I've imported from iMovie to Premiere cs6 is missing after the import!  please help!

    I initially imported raw video footage from an event that I shot into iMovie 11, but later decided to try an edit the footage in Adobe Premiere CS6.  I successfully imported the iMovie file folder into CS6, then saved and exited the program to work on it after lunch.  When I returned and reopened the file, the footage could not be found.  I attempted to reopen it in iMovie and it came up as a missing file also.  I know it successfully opened in Premiere because I've seen the footage.  I didn't trash anything so it's not in the trash.  Where did my footage go, and how can I retrieve it?

    Hi Ann, Hi JSW,
    I looked around a bit and noticed that this same problem sometimes happens in iMovie itself. People lose their media because it gets copied inside the project file itself. If you right click to see the package contents, you might be able to locate the media and copy it to a dedicated folder, then reconnect media to it in Premiere Pro. See this post on the apple website: Source clip missing | Apple Support Communities
    Thanks,
    Kevin

  • My MacBook Pro is extremly slow and keep freezing after upgrading to Yosmite, please advise

    My MacBook Pro is slow after updating to Yosmite it keep freezing and Safari most of the time not responding, generally speaking the performance is way worse than Mavericks when it was installed and here is my config:
    EtreCheck version: 2.0.11 (98)
    Report generated December 1, 2014 at 12:53:23 PM GMT+2
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2012) (Verified)
        MacBook Pro - model: MacBookPro9,1
        1 2.6 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        Intel HD Graphics 4000 -
            Color LCD 1440 x 900
        NVIDIA GeForce GT 650M - VRAM: 1024 MB
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Uptime: one day 16:9:57
    Disk Information: ℹ️
        APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) /  [Startup]: 748.93 GB (80.35 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 749.30 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 60
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.ZTE.driver.ZTEUSBCDCACMData (1.3.0) Support
        [not loaded]    com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.0) Support
        [not loaded]    com.nike.sportwatch (1.0.0) Support
        [not loaded]    com.novatelwireless.driver.3G (3.0.7) Support
        [not loaded]    com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
        [not loaded]    com.option.driver.Option72 (2.15.0) Support
        [not loaded]    com.option.driver.OptionHS (3.26.0) Support
        [not loaded]    com.option.driver.OptionMSD (1.21.0) Support
        [not loaded]    com.option.driver.OptionQC (1.11.0) Support
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
        [not loaded]    com.vodafone.driver (3.0.5) Support
        [not loaded]    de.novamedia.driver.NMLGEDriver (3.2.10) Support
        [not loaded]    de.novamedia.driver.NMSamsung (0.0.2) Support
        [not loaded]    de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
        [not loaded]    de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
        [loaded]    net.telestream.driver.TelestreamAudio (1.0.5 - SDK 10.6) Support
            /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
        [not loaded]    de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) Support
            /System/Library/Extensions/NMLGEDriver.kext/Contents/PlugIns
        [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMControl (3.1.9) Support
        [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMData (3.1.9) Support
            /System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
        [not loaded]    de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
        [not loaded]    de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
            /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
        [not loaded]    com.novatelwireless.driver.3GData (3.0.7) Support
            /System/Library/Extensions/Vodafone.kext/Contents/Plugins
        [not loaded]    com.vodafone.driver.Data (3.0.5) Support
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.CS5ServiceManager.plist Support
        [running]    com.nike.nikeplusconnect.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.rim.BBAlbumArtCacher.plist Support
        [running]    com.rim.BBLaunchAgent.plist Support
        [running]    com.vsearch.agent.plist Support
        [failed]    de.novamedia.VodafoneDeviceObserver.plist Support
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist Support
        [invalid?]    com.adobe.SwitchBoard.plist Support
        [running]    com.autodesk.backburner_manager.plist Support
        [running]    com.autodesk.backburner_server.plist Support
        [loaded]    com.autodesk.backburner_start.plist Support
        [loaded]    com.microsoft.office.licensing.helper.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [loaded]    com.oracle.java.JavaUpdateHelper.plist Support
        [running]    com.rim.BBDaemon.plist Support
        [not loaded]    com.vsearch.daemon.plist Support
        [running]    com.vsearch.helper.plist Support
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.ARM.[...].plist Support
        [loaded]    com.BlueStacks.AppPlayer.LogRotator.plist Support
        [loaded]    com.BlueStacks.AppPlayer.Service.plist Support
        [loaded]    com.BlueStacks.AppPlayer.UninstallAgent.plist Support
        [loaded]    com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
        [loaded]    com.facebook.videochat.[redacted].plist Support
        [invalid?]    com.jdibackup.JustCloud.autostart.plist Support
        [invalid?]    com.jdibackup.JustCloud.signup.plist Support
        [running]    com.nero.HSMMonitor.plist Support
    User Login Items: ℹ️
        uHD-Agent    Application (/Applications/BlueStacks.app/Contents/Runtime/uHD-Agent.app)
        iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application (/Applications/Dropbox.app)
        SpeechSynthesisServer    Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
        uTorrent    Application (/Applications/uTorrent.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
        AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
        Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
        net.juniper.DSSafariExtensions: Version: (null) Support
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
        Silverlight: Version: 4.1.10329.0 Support
        MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
        JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
        BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
    Safari Extensions: ℹ️
        Awesome Screenshot
    3rd Party Preference Panes: ℹ️
        Flash Player  Support
        FUSE for OS X (OSXFUSE)  Support
        GoPro  Support
        Growl  Support
        Java  Support
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            42%    firefox
             9%    WindowServer
             4%    system_profiler
             2%    hidd
             1%    plugin-container
    Top Processes by Memory: ℹ️
        1.44 GB    firefox
        215 MB    Viber
        155 MB    softwareupdated
        146 MB    mds_stores
        146 MB    WindowServer
    Virtual Memory Information: ℹ️
        206 MB    Free RAM
        3.39 GB    Active RAM
        3.14 GB    Inactive RAM
        1.16 GB    Wired RAM
        21.12 GB    Page-ins
        790 MB    Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for