Premiere CC hangs during rendering

Hi,
Its going on for a longtime. When i render the project file in Premiere Pro CC, it hangs up the software or stops it when it reaches somewhere around 90% or sometimes before that.
After Rendering, i achieve is faulty output, where in few bits and pieces the sound is not audible.
Its, my humble request to get me out of this situation by giving me an appropriate solution.
Looking forward for a quickie!!!
Thank you,
Ameya.

>Looking forward for a quickie
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

Similar Messages

AE CS3 hanging during rendering?!

When rendering(sometimes?!)it hangs. Looking at the processes though they're still ticking over.
I have a Quad Extreme Xeon and discovered when it is rendering there are 4 processes rendering, if I kill one (when it hangs) the rendering usually kicks into life again?? Though when you render next time your a processor down and if you try it a second time it hangs completely :(
Any ideas whats happening and how to fix it?
Please help as this is really frustrating!
MF

How much RAM do you have? What format do you render to? What CoDecs do the sources use (if any)? Multiprocessing crashes/ hangs either occur due to insufficient RAM or the CoDecs conking out. Especially the latter is a rather regular occurence, as most CoDecs are not fully multithreaded/ parallelized. also make sure your disks are fast enough. One instance having to wait for another to finish writing frames can also make it go too sleep (if it thinks it takes too long) and then they mutually lock each other....
Mylenium

LR hangs during rendering preview

LR 4.6 hangs after import while rendering the previews. Normally hanging starts after the first picture. Klicking the next one will restart the process - sometimes it runs up to the end, mostly I have to klick most of the pictures.
OS: Win 7 64Bit, File: DNG to DNG.
Regards
Walter

>Looking forward for a quickie
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

Why might Premiere Pro hang while rendering?

I am trying to render out a project for work which consists of twenty four 20:00 minute videos. We filmed it in R3D 3840x2160 23.976p and the audio is 4800Hz -24 bit - 2 mono. There is quite a bit of RGB curves color correction on some clips, a 0.7 rotation of the clips (tripod fail), and a bit of audio key-framing, but other than that the project consists mostly of titles and basic video files.
Originally I queued up about five of them and started rendering them in CC media encoder. The first lecture crashed at about 40% of a 2 pass render. I then tried to render a single video out through direct export and the render crashed a bit earlier, 25% (ish). I've tried several other things since, but no real success. The point that the render freezes will vary between 5-60% completion.
Here are my render settings:
VBR, 2 Pass
Target Bitrate 15-18Mbps
Maximum Depth
Maximum Render Quality
1920x1080 23.976 fps,
Thanks for taking the time to read this. I appreciate any responses!
Brian

Thanks Jim. What I'm finding is that Premiere is a sort of "RAM hog" and chews up RAM quickly without disposing of unneccesary RAM. Unlike AfterEffects, it doesn't have an internal automatic (or manual) "memory purge" option, so I've resorted to purging the RAM file cache manually with an app called "Memory Diag" from iTunes. It seems to be working great, as when my system starts to stutter on playback, purging the RAM clears out unused RAM, and the system starts working well again.
I'd recommend to Adobe to address this in Premiere CC, so that users don't have to manually purge RAM, but rather Premiere automatically detects when it's using unecessary RAM and purge the RAM itself.

Premiere Pro crashes during rendering any format

I have the current Premiere Pro CC Version in my 64bit windows 8.1 System. I have a nividia 7800 graphics card with current driver, 16GB ram and intel core i5 3,2GHz.
I did a 10:29 min version of my last holiday and tried to export it and it crashed. .It displayed a message that premiere pro stopped working and I will get a notice as soon as a solution is found.
I Tried to export to different formats and it never worked. I tried to export another shorter video I did (3:29min) and it worked. Both feature soundtrack, titles and so on.
Any idea, what could be the problem ? It did not do this till I bought my trialversion, before that I could export the video. I however also changed on part of the soundtrack and added some titles after registering the version.
What could cause a problem like this ?
cheers

It does crash everytime at the same time after rendering already 81% of the file. This is the same in Media Encoder and in Premiere pro. There seems to be no entry in the event viewer of windows to this toppic. I also did ne reinstall vie cc cleaner and it did not help.
Can it be that the programm crashes since i have lots of pictures larger 100MB in it ? (Panoramas)
Still any help would be nice
I also created random video files that are larger than 10 min and it works, just this project does not.

Final Cut Express hanging during renders

Hey all,
I was hoping someone could help with this problem because I have no idea what's going on- I run FCE 4.0.1 on a 2.6 GHz macbook pro with 4GB RAM.
I've used the program for two years and I've never had a problem rendering my videos, but suddenly when I render, things go exceedingly slow, and the render time increases (sometimes to hours) rather than decreases. Finally the program gives up and crashes.
I've changed render disks (both external hard drive, and the internal), I've changed render settings, and I've even tried to re-render old movies, but those won't render either. I ran disk utility and the disks are good.
I re-installed FCE, updated it, and still no dice...I use Boris Continuum Complete effects and reinstalled that as well...Still no rendering.
To further complicate matters, sometimes the rendering window pops-up on the screen and disappears immediately. When this happens, I have to switch between safe RT and unlimited RT to get it to begin one of its never-ending renders cycles.
Anyway, if anyone has any ideas, they would be greatly appreciated...
Eric

Thanks for the reply-
I'm not sure which sequence settings I should check, but I'm pretty sure I never changed them from the defaults (I'm not really a video guy...)
That being said- my clips are pretty basic. I use text clips from LiveType, ArtText or Boris Continuum (which admittedly is a rendering hog), and then I use some still images which are all png files. I make short educational videos and I've used the same type of effects and clips in all of them, but this is the first time I've run into this rendering issue. Like I mentioned, I tried to render some of my old videos which used to render perfectly, and they no longer render...
I checked activity monitor - when I began the render it was very high- like 110% of CPU, and then when the render began to slow down and fail the FCE activity went to about 80% of CPU. I wasn't sure what other info to check on the activity monitor...
Anyway, I've still had no luck...
Thanks for any ideas.

Premiere Pro CC CUDA rendering working with avi output only

Hello All,
on my system Premiere Pro CC is only using GPU rendering with AVI output formats.
All other formats like MPEG2, Quicktime, H.264 are unfortunatly fully CPU rendered (=slow).
I just upgraded from trial to payed mode and when Premiere started the CUDA was already enabled (might have activated it during trial already).
But anyway I checked if my card was in the support txt file and also used the cuda.zip auto tool to make sure I had no typo.I did this for Premiere Pro CC and also copied the list into the Adobe Media Encoder directory.
No matter what I did - no hardware rendering.
So I started playing with input and output formats.
It turned out that CUDA is currently only working with AVI output. I installed GPU-Z to check my GPU usage vs CPU usage in the task manager.
As soon as I pick any other output format than AVI - CPU usage during rendering is up to 80-90 and GPU at 0%.
With AVI output GPU ist around 30 and CPU in the 40ties or less as it should be.
What is going wrong here?
One of my old applications Cyberlink Power Produces 11 is doing the h264 rendering in half the time.
Any suggestions?
My System is running on:
Asus P8Z77-V Deluxe with 16GB Ram
Nvidia GeForce GTX 660 Ti (with current Driver - 332.21 )
Windows 8.1 Pro 64-Bit (with Media Center) and latest updates
Current entry in CUDA*.txt file (as printed by Adobe GPUSniffer):
GeForce GTX 660 Ti
And already tried:
GeForce GTX 660Ti
GeForce GTX 660
Best regards
Moongate
P.S. I already followed the instructions on this page http://www.studio1productions.com/Articles/PremiereCS5.htm

I now understand that Premiere Pro CC is only using my GPU for accelerating complex effects during editing giving me the possibility of a live preview during editing?
From the editing in other apps I know that the final rendering can also eat up much time which is why they try to accelerate it via GPU rendering. I see that Premiere is "outsourcing" this task to the Adobe Media Encoder (AME) so that you can continue working during rendering.
But I believe what tricked me into asking this question is that in the AME there is also the option to choose between software and GPU assisted Mercury Engine. So there must be a purpose for it and it sounds resonable that it is for GPU assited rendering.
So when the encoder is not using the GPU to speed up completion of rendering - what is he doing with that option?
Would it not be clever to cut rendering drastically using the GPU - its hard to believe that Adobe is only using it for previews?

Pre Pro 5.5 quits during Rendering/exporting

I've been working on short, 1min30 to 2min, testimonies including tracks for logo, title, matte, and the actual media. This requires keyframing changes in scale, position, 3-color correction, gobos and diffusion. The latter two coming from 3rd party Tiffen. Got the first 4 or 5 done with no problem, but the last several have quit during rendering or, if rendered, during exporting. Data: CS 5.5, Mac 10.7.5, Source footage is HD 1440x1080, hard drive has remaining capacity of 1.65 TB, 3rd Party the aforementioned Tiffen Dfx v.3, and, sadly, no Mercury Playback Engine GPU. Can any one tell what's going on?
Thank you,

I think this is for Windows, but may help BSOD shutdowns http://forums.adobe.com/thread/1427408?tstart=0
http://blogs.adobe.com/kevinmonahan/2014/01/13/computer-shuts-down-with-premiere-pro-or-af ter-effects/
And, some saved Mac links
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0
OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html

Error during rendering/encoding -- PLEASE HELP!!

Hey everybody!! After trying twice to burn this project to DVD, I'm about ready to rip my hair out!! First of all, here's the specifics about my computer:
Mac OS 10.3.7 / 800 MHZ Power PC G4 / 256 MB SDRam / My programs are iMovie 4 and I have iDVD5
OK, I'm trying to burn a movie that is about 1 hour, 23 minutes long. Even though my movie is not 90 minutes long, iDVD does tell me that it is too long and that I need to click on "Best Performance" in my iDVD Preferences. No problem, I did that. (By the way, at the time of the burning, I have about 5.1 GB on space left on my hard drive.)
Before burning I do repair permissions and delete my "com.apple.idvd.plist".
So, it burns and burns for roughly 6 hours. Right at the very end, the disk spits out and an error message comes up saying:
Encoding Video
Error during rendering/encoding:
This is very frustrating because I need to get this video done by tonight and turn it in by Monday morning!!
Any suggestions?? Please help!!! Thanxx!!

I have about 5.1 GB on space left on my hard drive
I don't think that's enough. Remember a DVD is 4.7GB (which iDVD first stores on your hard drive) plus temporary files that iDVD needs.

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

Error message during burning: Error during rendering/encoding

Hello,
I am using iDVD 6.0.2 to create a DVD. I have pictures and videos. The videos are in .ASF format and they are played on Quicktime on my computer.
Anyway, when I go to burn the DVD, it goes through the slideshow fine. But then, once it starts videos, it stops and the following error message shows up:
Encoding Video
Error during rendering/encoding
I am using a Memorex DVD-R (8x, 4.7 GB, 120 min video) dvd. Is there any way possible I can fix this problem? I really need this DVD soon. Thank you so much.

Best Buy and Office Depot carry Verbatim by me. Use only DVD-R, not DVD+R.
My guess is that .ASF file...........
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

IPod recognized, but hangs during update

So my iPod will show up in Finder and in iTunes, and automatic updating will begin. However, at random times during the update, sometimes 4 songs in, sometimes 65, the whole process will just hang. iTunes status screen gets stuck on flashing between "Updating iPod..." and Song 65 of 2054 and just flash between those two over and over.
Meanwhile, the iPod screen itself is also stuck and no longer flashing "Do Not Disconnect" -- it's a steady screen with none of the normal flashing.
Tried resetting, doesn't do anything.
Tried restoring, and it hangs after Authenticate asks me for my password to Restore the iPod.
I wind up having to just force disconnect and force quit everything and restart.
Anybody else have this problem? Thanks for any help you can give.
Oh btw, OS 10.3.9, iTunes 4.9, iBook G4.

I am having the same issue where it hangs during update -- seems to always happen around the 1800th song. Here's more specifics:
-I've got 7000 songs in my Library
-my iTunes Music folder is located on an external FireWire HD
My Mac has no problems mounting the iPod. No problems restoring with iPod Updater. No problems with erasing using Disk Utility.
I have tried the following:
1. Resetting and then restoring via iPod Updater.
2. Erasing/reformatting via Disk Utility, including zeroing out all data, and then restoring via iPod Updater.
3. Resetting into Disk Mode.
4. Manually updating songs.
5. Automatcially updating songs.
Nothing works. I have been troubleshooting this for about 8 hours now with no luck. No matter what I do differently, it always hangs around song 1800. I even tried uninstalling/reinstalling iTunes -- and I have tried this with several different user accounts and on different partitions I have set up.
When it "hangs," the iPod itself just makes a the "clicking" sound of a HD. I'm wondering if the HD is just bad -- but it came up with no errors when checking with Disk Utility.
Any more suggestions?
Johnny

Arch Live CD x64 hanging during boot at "triggering uevents"

Hello!
I recently was recommended Arch by a friend, and after I followed the 'Newbies Guide' and burning a live CD to install Arch with, it appears to hang during Live CD boot at "installing uevents."
I am trying to install Arch as a dual boot on a late 2008 MacBook Pro which is currently running x64 Windows 7. I have plenty of HD space (100gb free and 100gb unallocated to install Arch onto).
Here is a picture:
http://i.imgur.com/Y8P41nf.jpg
I get the same error weather I try to install x64 or i686 (I think that's what it's called). Is there any reason for this?
Thank you!
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code --
(Sorry, missed that. My bad!)
Last edited by RalphORama (2013-09-07 03:09:13)

frank604 wrote:
You can try nomodeset. Seems to be a failure in loading a driver for your hardware. To read more on similar issues, there's a few posts with more info and suggestions by googling it.
Google result: http://lmgtfy.com/?q=halt+at+triggering+uevent
Results:
https://bbs.archlinux.org/viewtopic.php?id=151259
https://bbs.archlinux.org/viewtopic.php?id=140426
Thanks! I tried googling it myself but got mostly answers that didn't work. I'll try this!

Disk utility hangs during disk verify

Initially 'disk verify' registered errors on exit - minor error/issue it said,some kind of header problem, so I ran disk utility off the install disk. Now the machine's native version of disk utility hangs during disk verify, blue & white spirals forever.
This coincidentally straight after my gmail/google address/account was hacked a couple of days ago.

Have you tried booting in SafeBoot mode (shift key held on start
until login screen appears) then launch Disk Utility and then run
its 'repair disk permissions' item, selecting the Macintosh HD;
and then note the repair window. It should fix something.
And when Disk Utility is done, quit it, and restart the Mac normally.
{...It is unlikely something from gmail affected your computer unless
you open up unknown sourced emails or go to odd web sites where
something may be downloaded from there, which you would almost
have to install (as admin, etc) for malware to work. You can get and
try ClamXAV for free to see if it sees any malware virus content.}
If you use Gmail, and do not log in using the https:// (secure http)
you should change the habit and bookmark the secure login site.
And when booted from the Installer disk and running Disk Utility
from there, see about running "repair disk" and not verify. The
repair choice will verify; but verify will not repair. Could be if
you cannot use the Utility to Repair the issues, and the other
SafeBoot mode and the computer's Disk Utility to get it working
you may need to further troubleshoot and/or get third-party tools.
In any event...
Good luck & happy computing!

Premiere CC hangs on startup ' scanning audio plugins'

Having trouble with Premiere CC on a Mac. Installed and re-installed several times, deleting everything I could find.
Everything installed fine - but when I startup Premiere, it hangs on the 'scanning audio plugins'
Does anyone have the same experience and if so, is there a simple solution?
Thank you.

Hi,
Please move all Items from the below mention folder location and empty the Folder
Main Hard drive->Library->Application Support->Adobe->Common->Plugin->7.0->Media Core
Once the Media Core folder is Empty then try to launch .
Also empty the Quick time folder from the below mention location
Main Hard drive->Library->Quick time
Move all components from the Quick time folder and empty the folder and then try to launch , it might fix the problem for you as it seems some plugins are causing the issue.
regards
Karandeep singh

Premiere CC hangs during rendering

Similar Messages

Maybe you are looking for