Premiere cc not displaying video new update

anyone else experiencing that some video isn't showing up in your play back window after this recent update?

What video?
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
And LOTS more information needed for anyone to try and help
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Similar Messages

Premiere pro not displaying video

I have CS5 premiere pro. I import a avi file, but the properties only refer to audio. Dragging to preview window only shows audio
Other files work fine
The file plays fine in other media players, video and audio
I have started a new project, just to import this file, but same problem
Anyone any ideas,
Much appreciated
Chris Anderson

John/Bill,
Many thanks for your reply
The output from mediainfo is shown below.
The file wont drag to the timeline at all. My project settings
were AVCHD 1920x1080p
The file was created by a program called 'debut video capture software' by NCH Software, i was wanting a video
capture of my desktop.
I didnt provide any screenshots, as there wasnt anything to show really.
Apart from above, If anyone can recommend an alternative video screen capture program that would produce
files that PP likes that would be great
Thanks again Guys,
Chris
Video
ID                                       : 0
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Codec ID                                 : H264
Duration                                 : 4mn 31s
Bit rate                                 : 375 Kbps
Width                                    : 608 pixels
Height                                   : 344 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 30.000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.060
Stream size                              : 12.1 MiB (72%)
Writing library                          : x264 core 116 r2066 ddf82cd
Encoding settings                        : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-4 / threads=8 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=crf / mbtree=0 / crf=28.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Audio
ID                                       : 1
Format                                   : MPEG Audio
Format version                           : Version 1
Format profile                           : Layer 3
Mode                                     : Joint stereo
Mode extension                           : MS Stereo
Codec ID                                 : 55
Codec ID/Hint                            : MP3
Duration                                 : 4mn 30s
Source duration                          : 4mn 30s
Bit rate mode                            : Constant
Bit rate                                 : 128 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 4.13 MiB (25%)
Alignment                                : Split accross interleaves
Interleave, duration                     : 26 ms (0.78 video frame)
Writing library                          : LAME3.97

Adobe Premiere Elements 13, will not display video picture, audio only. My video format is listed as compatible with Adobe.

Adobe Premiere Elements 13, will not display video picture, audio only. My videois listed as compatible with Adobe.

douglass
On what computer operating system is your Premiere Elements 13 running? Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates?
If not, please do so.
You have not given us enough information with which to help you.
What are the properties of your source file that is presenting in the project with audio but no video?
Quickest way to gain that information is from brand/model/settings of the camera that recorded the video.
I am looking for
video compression
audio compression
frame size
frame rate
interlaced or progressive
file extension
pixel aspect ratio
What does the file's thumbnail look like in Project Assets after it is imported....thumbnail with no image (gray), thumbnail with only an audio icon
within it, or other? On the Timeline, what do you see represented in Video 1....nothing as opposed to Audio 1 where you see the audio portion of
the file?
Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1? Are you running the programs as
administrator?
Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
Let us start here. Based on your reply details, we will customize troubleshooting strategy for you.
Thanks.
ATR

Source monitor and program monitor boxes will not display video in full only half

I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half. So the top half of both monitors are black and the bottom half is where the video displays. But you can see that the video is missing the top part. Like people's heads are cut off and can only see body. How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

This is a known issue with a recent Windows update.
The Fix (post 3):
http://forums.adobe.com/message/5494175#5494175
The Status Update (posts 46 / 52):
http://forums.adobe.com/message/5555797#5555797

Bridge CC not displaying video files

Bridge CC not displaying video files - I just installed the new Bridge CC and I am unable to view and play my video files. The files are Quicktime files. The title of the file is displayed with a QT logo, yet no video is registered. Has any one else has had this issue or has any advice?

This is still not working for me as I've opened another question regarding this here: .mov thumbnails not showing up for Bridge CC on Mac OS X 10.10.2?
I can view my Quicktime .mov thumbnails in Bridge CS6 but not CC. I have all the latest Adobe CC and Mac OS X 10.10.2 and QT 10.4 updates. I've removed the media cache folder and purged my cache - every possible fix I've seen on the internets and still, no thumbnails for .mov files in Bridge CC. I've toggled the "Generate Monitor-Size Previews" and "Keep 100% Previews" to no avail. I'm working on an important video project for a client and this is the first video assignment I've worked on with CC and so far, it's not working out well.

Safari will not display video content/flash etc on websites ie youtube etc

I am running Panther 10.3.9 and Safari 1.3.2 (v312.6). When trying to access Youtube, Facebook etc Safari does not display video/animation etc and so Safari closes with an error. It will also not play video content on the Apple website. I would also like to know the following if someone could please help; What is the best software to upgrade to ie Tiger? etc ; What is the maximum memory upgrade for my machine and what would I ask for and best place to buy? Any assistance is much appreciated. Kind regards VJR1OK!!

You may find some improved online performance with Panther 10.3.9 with
the last supported Flash and Shockwave players installed (older ones have
to be uninstalled) and though the use of Camino browser since it is up-to-date.
There still will be some limitations; but if you have the correct Flash/Shockwave
players for Panther installed and get Camino, and use it as a default replacement
for that ancient Safari, that would make a difference. Also, it always makes sense
to get more RAM in an older computer since they usually shipped with very little.
In the case of older computers, often the capacity of the hard disk drive was also
a matter of marginalization. A large enough drive to have plenty of free space in
it, after applications and the OS X is installed, so the system can have room for
temporary files and Virtual Memory, then it can run the last supported OS X ok.
An externally enclosed bootable hard drive (FireWire enclosed unit) could be
used to add space or a second system for use when at a desktop, so for the
sake of discussion, the internal drive would not necessarily need replaced to
check out a different operating system that may need more room in a drive.
RAM is an easy fix; and a new browser from Camino.org - plus those players.
Good luck & happy computing!

IMAC 21.5-inch, Mid 2011 not display internet news pictures

Help, please. My iMAC 21.5-inch, Mid 2011 does not display internet news pictures. How can I 'fix' this?

I had no problems watching the streams & videos using FF v23.0.1.
Make sure you are using the latest version of Adobe Flash Player
Check Flash Version
Adobe strongly recommends that you first uninstall any previous version of Flash Player, using the uninstaller:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html#main_1 0_4
Follow the instructions closely, such as quitting ALL applications first before installing. Repair permissions and restart your computer after the installation is completed.
Authored by Klaus1
Since I cannot read German, I was wondering if there was some sort of "Help" listing at the bottom of the website you linked? If so, there should be a section or a FAQ section that should tell you what you need and/or the system requirements to watch their streams & videos.

Premier Pro CS6 not displaying Video

Premier Pro CS6 is not displaying video. Loads and plays clips with sound and all monitors work but no video displayed, installs them in timeline, exports - just does not display video in program or preview monitors nor will it scrub in the thumbnails (static images only). Just started all of a sudden for no apparent reason. All valid file types, even previous projects that worked fine before display no video now.

If you are on Windows it HAS been known to happen that a Windows Update will cause a video driver to have problems (more information when you ask a question is a good thing http://forums.adobe.com/message/4200840 so people will be able to help)
It is "more usual" to need a video driver update, so good to know that a simple un/reinstall worked for you

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

Purchased a TV show in itunes...can only hear audio, will not display video

at 1st....
Purchased a TV show in itunes...can only hear audio, will not display video
now...
shows the show is 48 min but then is only 30 seconds once opened

Hello piff316,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

I can not download the new updates on my iphone 4

i can not download the new updates on my iphone. it hasnt been upgraded since in got it

sync your phone to itunes and update the software that way. Before you update make sure you BACK UP your phone!! http://support.apple.com/kb/HT1766

I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.

I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.

Some folks recommend OmniDiskSweaper to allow you to review your stuff to find possible candidates to throw away.
Even if you throw away some stuff and your desired "1.98GB", then what? If that's the number you need for the update, you'll just use most or all of the reclaimed space with the update and you are right back to where you started.
You don't specify what kind of machine you got but presumably it's a mac pro since you posted in the Mac Pro community. In which case just get yourself another drive or two and move stuff around to free up your boot drive.
[Perhaps you should hurry too since I expect hdd prices might be going up due to possible impending hdd shortages.]
Finally, if some of those updates are major system updates you want extra drives for backups because I always recommend you never do major updates to your system without backups to that system.

Apple tv does not display video from my iphone

My iphone 5 will not display video content on my apple tv, but the audio is working. It works intermittently with mirroring turned on, but I've never had to do that before as I connect to my apple tv via wifi. The audio plays and displays a little icon in the lower left corner of the apple tv screen with the iTunes icon and indicates I have internet radio playing. This has never happened before. I tried the same video from my iPad and it worked fine without activating the mirroring function. All applications are up-to-date. How do I fix this?

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

Premiere cc not displaying video new update

Similar Messages

Maybe you are looking for