Premiere CC not using all computer resources. What can I do to optimize?

I just built a new editing system and am exporiting a new project and my cpu sits at 58-65% usage and gpu at 2-6%. Ram usage is about 8GB
The file is from dslr .MOV clips to H.264 MP4 export, 1080P 30FPS 20Mbps CBR. Total lenght 6min 20 sec with warp stabilizer, contrast, sharpening filter, and neat video applied
As far as I know all of those effects are CUDA accelerated.
Media is on my Raid 0 Seagate 3TB x2 drive (about 350 Read/Write) Scratch is on 120gb ssd drive, OS and Adobe CC on 240GB SSD. Both ssd's 500 read/write.
Exporting to either os drive or raid 0 has no difference. Export time is about 25 min.
Are there any optimizations I need to do to speed things up or is this normal? I ran PPBM7 yesterday and sent in the info. I got the following results from the output file,
I/O time = 111 Sec 334.16 MB/S , h.264 Timeline = 208 Seconds, MPE gain 461/18=25.6 .
Below are PC specs. Everything is stock, not overclocked yet.
4930k, gtx titan black , 32gb ram 1866 , 650watt 80gold psu, 240 ssd os, 120 Ssd scratch, 6tb raid 0 for media, win 8.1 , premeire CC.

Is that something that Adobe blocks out?
So I just removed all neat video and Export time was about 6 min compared to 25. Cpu bounced between 63-70 percent and gpu would bounce from
0% to another percentage and back to 0% about once a second. That number being between lowest 2% and highest 62% average probably about
38%.
Thank you for your responce! I'm happy with my build now need to see what I can do about this neat video thing.

Similar Messages

  • TS1424 2 songs were cut off and not downloaded all the way, what can i do

    2 songs were cut off and not downloaded all the way, what can i do

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Macbook Pro not using all available resources

    Hey All,
    I have a MacBook Pro with Retina Display (Late 2013) with the 750M and 16 GB RAM. I monitor most of my resource stats with MenuMeters and I've been noticing that it doesn't use all the available power to complete a given task, I assume to save battery life. What I'm wondering is, can i change some settings to allow my processor to run faster (not overclock, just use a higher percentage of available CPU power)? For example, I was updating league of legends, and the launcher was scanning itself to check for discrepancies. It took a minute or two and I noticed that my CPU percentage hovered around 20-25% and my SSD read speeds were not even close to the theoretical maximum (I've got the PCI-e interface). Is it just poor programming that doesn't let my computer work its hardest? I feel like I have a Porsche with governor on it.

    Expanding on the above, with 64-bit systems like Mountain Lion, RAM becomes critical. 4GB is a bare minimum. And will fall short if you add a few hungry apps. What happens then? Unix's fallback for low RAM conditions kicks in: virtual memory. The system tries to simulate what it does not have: extra "RAM" in the shape of a chunk of hard disk space where unneded stuff gets dumped to free real RAM. Now the system starts to lag as it desperately tries to guess which part of stuff in RAM can be moved to the disk and waits till the slow disk operation concludes. Worst case is when space runs out in the drive and all comes crashing down.
    So, upgrade and give the big cat at least 8GB RAM. Can go up to 16GB. And always leave AT LEAST 10% of the drive empty.
    Lastly, if you want to know what your cores and threads are up to, start up Activity Monitor. Click on the CPU tab at the bottom part of the window. Then double-click on the CPU graph. A new window will pop open, showing the load on each thread the CPU can handle concurrently.

  • Trying to sign in on itunes but keeps telling me id not used before review settings what can i do

    trying to sign in on itunes but keeps telling me id not used before review settings and accept cookies checked every thing still cant get on can anyone help thank you

    Try logging on to your accunt on a conoputer and then go to edit you account.  Make sure that you account details are correct and the then save.  It may be an Apple problems since some other have been have same or similar problem this morning.

  • Firefox crashes - even when not using the computer

    Firefox crashes - even when not using the computer
    Sometimes I can walk away from the computer and only have one tab open (e.g. Facebook) and when I come back to the computer a few hours later, Firefox has crashed for no reason.

    Unfortunately the linked crash report is empty (@ EMPTY: no crashing thread identified; corrupt dump) and doesn't include any data, so it is not possible to find the cause of the crash.
    Did you recently submitted other crash reports that were submitted and show a crashing thread?
    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Premiere Pro CC not using all resources... 4k

    I just put together a new workstation machine for editing 1D-C 4k files in Premiere Pro and After Effects.
    Specs...
    i7 3770     3.4
    Gigabyte Z77 Mobo
    32gb Corsair Vengance DDR3 1600 RAM
    250gb Samsung SSD
    4x 2TB Seagate 7200 HDDs in RAID 0 (Yes I know it isn't backed up, we have that part covered)
    Nvidia Quadro K4000 (3gb vram)
    Anyway, we transfered a project with all the media files to our RAID media drive.
    It opened up very quickly and loaded all the media much faster then our old workstation.
    Then I hit the spacebar (perview) and the problems started..
    It won't play back smoothly at all,
    AND it is only running the CPU at 10-20%, GPU 10-50%, ram at 25% and it is not really taxing the drives very hard either...
    Why won't PP use all the resources at 100% like I have previously seen it do on other machines?
    ** The project we are trying to play is 2 layers of 4k .MOV footage in a 1080 timeline... with sharpening, Fast color corrector, and RGB curves.
    ** It also drops every fourth frame when playing back just one layer of 4k .mov footage in a 1080 timeline with NO Effects applied. (Much smoother, but still not using all resources)
    What I am asking, is why would it be giving up so quickly? Before even taxing the resources very hard?

    I too have a recent 1D-C project I'm editing.  That 1D-C is something, yes?  Most filmic images I've ever seen from a DSLR.  But I digress. 
    I'm following a workflow closer to the one used by Philip Bloom and Shane Hurlbut.  The Motion Jpeg files will not play well at all on your system.  It's strictly a capture medium - not an editing one.
    I converted all my 1D-C files to Prores 422 at 4K size using Mpeg Streamclip.  Those files imported beautifully and edit well on my Retina Macbook Pro laptop.  I usually set playback to 1/2 quality, ps. 
    I have had problems using CUDA, so I'm sticking to software mode.  But I don't see any problem with being able to cut my film and finish on my computer.
    Also - my sequence is a 4K sequence right in Premiere.  I simply chose a clip and "made a sequence" from that.  Why scale when I don't have to?  I've exported to 1080p easily from the sequence. 
    If anyone finds this workflow less than ideal, I'm all ears.  Thanks. 

  • I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 v.3. What could be the problem, how ca

    I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 version 3. I can open Internet Explorer, but that's not my default browser, so I have no problem with the Internet connection.
    What could be the problem, how can I restore my browser without losing my bookmarks, settings, etc?
    == Operating system ==
    windows XP

    If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]

  • HELP: Premiere Pro CC not using all CPU and RAM during rendering and export

    Hello,
    I am using Premiere Pro CC on a Windows 7. My timeline is quite simple with two videos, one with the movie (mpeg) and the other with the subtitles (avi).
    When I render the sequence in PP or export, the rendering time is way too slow and it only uses around 15-20% of the CPU and 3 GB of RAM.
    My hardware config is :
    - CPU : i7-4770k 3.50Ghz
    - RAM : 8 GB
    - Disk : 2 x 3 TB SATA (no raid)
    RAM is not the bottleneck, neither the disk access.
    I have tried rendering and exporting the same project on an iMac (with an i5 2.7 Ghz and 4 GB RAM and only 1 disk) and the result is 4x faster !!!
    The CPU usage is close to 100% as well as RAM usage.
    So how come PP uses all resources availble on an iMac and not on a Windows 7 ?
    Is there any known bug or software bottleneck on Windows 7 ?
    My machine is brand new and nothing much installed besides Adobe products.
    Any help is very much appreciated.
    Thanks,

    I just rendered out a a 2 minute sequence with about 100 clips in it and Colorista effects on everything to the Vimeo 1080 H264 preset. It took about 5 minutes to render straight from Premiere, it used all the recourses it could, my CPU was running at near %100, same with my ram and GPU, I was happy.
    Then I did another render with Red Giant Denoiser and it now wants to take 30 mins and it is only using about %20 of the recourses available. My problem isn't that its taking longer with Denoiser but that its not using all of my computers CPU and GPU.
    Im rendering at maximum render quality and bit dept to H264 (Im happy to wait the extra time), if I try to use VRB 2 it encodes 1 pass at a time and wants to take up to 40 minutes.
    I would appreciate some advice on this.
    Premiere Pro CC 2013
    2.6 GHz Intel Core i7
    NVIDIA GeForce GT 750M 2048 MB (CUDA GPU enabled in Premiere)
    16 GB 1600 MHz DDR3
    OS X 10.9.4 (13E28)

  • I am running out of hard drive space so I clear 32GB of space at midnight, went to bed. When I wokle up I had no space left even though I had not used the computer, the system.lg is FULL of stuff and I have no HD space anymore? What's eating it up?

    I am running out of hard drive space so I clear 32GB of space at midnight and went to bed.
    When I wokle up I had no space left even though I had not used the computer, the system.lg is FULL of stuff and I have no HD space anymore?
    What's eating it up?

    WORD TO THE WISE
    the OmniDiskSweeper was a very helpful download, because it laid out the HD and all the files on it in a "largest to smallest" fashion. When I did this I found that I had an inordinate amount of memory being taken up in my Mail Data folder, this did not make much sense so when I dug deeper I found that a 59MB scanned file that I had emailed 3 weeks ago had not been delivered, so the computer was retrying every minute and saving the history of what it was doing, so it was saving the 59MB file as well as the log about the 59MB file and hence for the last 3 weeks it's been chewing away at HD space recording the activity of the undeliverable file.
    I deleted the Data record folders and removed the yahoo account from My Mail and reinstalled it with proper IMAP information and the HD is secure and holding at 331GB of free space. Like it ought to be.
    I love the fact that if something very strange is happpening on your MAC there is a REASON....find it and fix it, and move on. In the PC world you would reboot 20 times, call some guy in India who will ony try to sell you a new subscription or warranty for $99 and never solve anything.
    I am at rest once more, thanks for the tip

  • HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

    have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not  be detect to my computer? what can i do? please help me..

    You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
    However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

  • When trying to upgrage my iPhone, it indicates that I will loose all data and apps and that I should update using the computer that I previously sync'd with.  I no longer run that computer.  What can I do so that I don't loose all my apps?

    When trying to upgrade my iPhone to iOS5, it indicates that I will loose all data and apps and that I should update my iPhone using the computer that I sync'd with originally.  I no longer use this computer and how can I sync with my new on and not loose my apps?

    Great question.  I have the same issue.  Any ideas?

  • I have been use all computer  de authorise option just few months ago but now i have exceed 5 pcs with my id now what i can do to de authorise all once again

    I have been use all computer  de authorise option just few months ago but now i have exceed 5 pcs with my id now what i can do to de authorise all once again please help me

    iTunes Menu, choose "Store", then you should see the "deauthorize all" selection.

  • I have one folder with several projects all of which Aperure can not find the original.  I do not use referenced files.  I can't make any adjustments like cropping etc. What can I do to print any of these photos?

    I have one folder with several projects all of which Aperure can not find the original.  I do not use referenced files.  I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos?  IO have no ther projects with this problem.  My Aperture Library is automatically saved to two external drives.
    Dick Koos

    I have one folder with several projects all of which Aperure can not find the original.
    Have you checked inside your Aperture library, if the original files are still there?
    Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
    Are your original files still there?
    If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link:  Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
    If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images.

  • I just purchased itunes but not all the songs in my library transferred to my second computer.  What can be done?, I just purchased itunes but not all the songs in my library transferred to my second computer.  What can be done?

    I just purchased itunes but not all the songs in my library transferred to my second computer.  What can be done?, I just purchased itunes but not all the songs in my library transferred to my second computer.  What can be done?

    I'm sorry but I don't understand your question. iTunes the software is a free download. Do you mean you bought a subscription to iTunes Match? If so, what do you mean that your music did not transfer to your second computer. Please describe the issue in as much detail as possible so we can better help you.

  • I do not have a computer.  What device can I use to print from my iPad?

    I do not have a computer.  How can I print from my iPad?

    Not sure what your question has to do with an Apple AirPort Express, Extreme or Time Capsule. 
    An AirPrint compatible printer will need to be installed on the wireless network there.
    This Apple support document provides a list of AirPrint compatible printers:
    http://support.apple.com/kb/ht4356
    Some printers may require a computer for the installation. Check with the printer manufacturer's support team to make sure that you will be able to install the printer on your wireless network before you buy.

Maybe you are looking for