Premiere CC Sequence length not automatically changing to last asset content.

For some reason my Premiere CC sequence is stuck at 12 minutes while the actual length of my assets is only 2.5 minutes. It's not automatically resizing to the location of the last asset on the timeline. What might be going on?

Where are you seeing the sequence duration reported as 12 minutes. The screenshot you posted gives no indication of duration. Please post another that shows the Program Monitor +/or the Project panel (with the Media Duration and Video Duration columns visible).
Edited to add: Okay, I think I see what has you confused: the Timeline extends to about 12 minutes. That has nothing to do with the sequence's duration. It's basically a function of the zoom level. If you press the minus key a few times, the Timeline will zoom out farther still.
To check the actual duration, check the time shown at the lower right corner of the Program Monitor. Note that if In/Out points are set in the sequence, the duration shown in the Program Monitor reflects the trimmed duration. If you want to see the full, untrimmed duration, either clear the In/Out points or consult the Media Duration column in the Project panel.

Similar Messages

My calendar date is not automatically changing, what's the proper setting?

My calendar date is not automatically changing, what's the proper setting?

If the population of the ObservableList (independent of any UI considerations takes a long time, then you probably want to do the populations off the JavaFX application thread (e.g. via a javafx.concurrent.Task)).
If you do populate the list in a Task, standard threading cautions apply in terms of not updating items in the scene graph off the JavaFX application thread and ensuring that the system is absent of race conditions, etc.
Look over the documentation of http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Cell.html and that may help you.
The JavaFX controls such as ListView have been carefully designed to exhibit high performance even when backed by extremely large lists (through the concept of virtualization explained in the Cell documentation). For example, if the backing list is updated but the portion of the list being updated is not within the currently displayed list contents, (I would hope) the update would be very efficient.

Automatic change in MIRO Screen from Invoice/ Credit Memo/Sub-Credit/Sub-D

Hi All,
While we post the invoice through MIRO T-code, if we change the Transaction type from Invoice to Credit memo/Sub-Creditmemo/Sub-Debitmemo after completion of particular document SAP is not automatically changing the Transaction type as Invoice, its still remains same Transaction type which we changed last.
Can anyone advice is there a fix for this to get back to Invoice after doing anydiffernet transaction type..
Regards
Balaji

1) You have to enter the subsequent credit
2) The account postings for a subsequent debit/credit depend on the quantity that the subsequent debit/credit applies to:
If the quantity of the subsequent debit/credit is smaller than or the same as the quantity delivered, the system tries to post the subsequent debit/credit to the stock account. If the material is valuated with a standard price or if there is insufficient stock coverage for the quantity to be debited or credited, the amount is posted to a price difference account.
If the quantity of the subsequent debit/credit is larger than the quantity delivered, the system distributes the relevant amount proportionally. The part of the subsequent debit/credit that does not have a goods receipt is posted to the GR/IR clearing account. The remaining amount is posted to the stock account u2013 or in the case of standard price control or insufficient stock coverage u2013 to a price difference account.

Changed mailadres in apple id didn't automaticly change in icloud account

I have recently changed the mailadres of my apple id. This did not automaticly changed it in my icloud account, so that it is now not possible to log in on icloud. Does somebody have solution?

You have the find my iPad app on?
If yes welcome to my eternal suffering if no you can backup delete the account sign in with the new one and install backup and you are done.

After Affects CS6 comp do not update in Premiere Pro sequence

Since CS6, if I change an After Effects project when the comp is already in a Premiere Pro timeline, the comp won't automatically update on the timeline, but it will update on the source monitor.

I'm having a similar problem. I have 2 Mac Pro machines that have recently been updated to CS6(Production Premium). This occurs on both machines. And is not specific to any one item being changed. It occurs to any changes being made AFTER rendering into PPro.
If I link between PPro & AE comps/sequence, I can make changes in AE and it will update to PPro as long as it has not been rendered. However, if I render the sequence in PPro, and then go back to AE and make changes(and yes, I am saving it before returning to PPro), it does not unrender the PPro sequence, and will not update. It remains rendered in the sequence as if nothing has changed. No matter what I do to the imported AE comp in PPro, it will not unrender. (short of adding an adjustment layer with an effect above it all in the sequence to force it to unrender - this is my workaround for the moment).
I've gone so far as to delete the linked comp out of PPro, and re-import the AE comp, and if I drop it on the same sequence it pops immediately back up as rendered. My guess is it has something to do with the global cache.
This is not a legacy issue, as this project was created from scratch in CS6.
Here's the workflow
Create PPro Proj -> import footage -> edit video -> save.
Create AE Project -> edit composition to desired effect/graphics etc... -> import or drag comp from AE to PPro -> Lay AE comp on video layer above base footage -> Go back to AE make any desired changes and Save -> return to PPro, and project is updated -> Render ALL in PPro -> realize something needs to be adjusted in AE -> go to comp in AE, make adjustment & save -> return to PPro and find that it will not update/refresh/unrender.
I can duplicate this exactly on the other machine as well, so it's not a specific issue with a specific machine.
Am I missing something short of clearing out the entire render folder in PPro?

After Effects CS5.5 will not open a Dynamically Linked Premiere Pro sequence in the comp. window

Hi all,
I'm trying to export a Premiere Pro sequence which is in 2K and the footage has been shot as RED 5K. Adobe Media Encoder will simply not work as I am having the quite widely discussed issue where it will just 'hang' at certain points and not complete the export.
The most popular solution to this problem is to export via the Render Queue in After Effects instead. However, therein lies the problem.
I go onto After Effects. Choose File -> Dynamic Link -> Import Premiere Pro Sequence.
The box pops up, I choose the Premiere Pro Project File then select the sequence I want to export. It then appears in the After Effects project panel window like so:
However - when I try and drag this to a new composition window, one of two things have happened. Either A) nothing happens (literally, NOTHING changes) or B) as the following example shows, it seems to add it to a new composition, but the video is entirely black. I have tried rendering it and it just produces a black video.
The other thing people seem to suggest is to just import the entire Premiere Pro sequence into After Effects. I've tried this, but any titles I have added in PP force the video to fade out then back in, in the place where the title should be?? So I can't export the video this way either.
My system is as follows:
Thanks massively in advance for any help that is provided!

This is months old but I'm now having the same problem with AE and Premiere CS6 after updating last night: Dynamic linked sequence shows up in the project window in AE and even plays video if previewed, but will not drag or alt-drag into any comps, including a new comp (makes a new comp with matching settings, but empty).
Furthermore, I do actually have an earlier version of the same sequence placed in one of my AE comps, which I think was done using the same steps just prior to updating the apps last night. Did this break?
I'm a little concerned since the biggest reason I'm trying to use premiere is to eliminate the exports when adding graphics in AE.

Sending Premiere Pro sequence to Pro Tools for automatic audio conforming

I’m looking to implement an online-offline workflow at my production company, and I’m trying to figure out if it’s feasible to send a sequence from Premiere Pro to Pro Tools with enough metadata to take advantage of Pro Tools’ automatic conforming feature.
Premiere Pro or Audition doesn't seem to have any kind of feature like this, so I’m turning to Pro Tools. Here’s a demonstration of the feature from Avid: http://youtu.be/Gz9e9LuIdXU
For color grading, we’re already sending XML from Premiere Pro into DaVinci Resolve, and DaVinci Resolve perfectly automatically conforms the offline proxies to online high-quality clips suitable for grading. I’m trying to accomplish the same thing with the audio clips to prepare a sequence for sound mixing. The offline proxies in a sequence contain only compressed stereo tracks, but online audio clips have all of the separate uncompressed tracks for each microphone.
My initial thought was that, before any offline editing occurs, I might, in the Premiere Pro Metadata panel, add the names of the sound rolls to all the offline proxies in the “Tape Name” field.
I’m wondering if that metadata for those clips in the Premiere Pro Project Panel are included in an EDL that would be exported out of Premiere Pro, so that Pro Tools would know how to correctly choose online audio clips.
I know EDLs contain timecode, and that seems like it would be sufficient for Pro Tools, if production only occurred within one day. However, if there are audio clips recorded on different days, at the same time of day, some audio clips in a sequence would have identical timecode, and Pro Tools wouldn’t know which clip to automatically conform. It seems like Pro Tools would choose which clip to conform by first looking at timecode, and then if there were multiple clips with the same timecode, it would resolve the conflict by identifying the specific sound roll. This is why it seems important to have the sound roll metadata included in the EDL out of Premiere Pro.
EdiLoad looks like software that might be able to batch update sound roll metadata for an EDL already exported out of Premiere, but I’m not sure.
http://www.soundsinsync.com/products/ediload
Manually going through Pro Tools and assigning correct sound rolls in a picture-locked cut wouldn’t really be an improvement over manually conforming. If I have to go through a cut and locate online audio clips, I might as well just conform manually.
So my questions are:
When exporting an EDL out of Premiere, does the EDL include “Tape Name” metadata for Pro Tools to read as a sound roll? If not, is there another format I could use that would make this round-trip feasible?
If not, does anyone have experience with EdiLoad? Would EdiLoad work to do what I'm trying to do?
Is there any other way to accomplish automatic conforming, or something else that I'm missing?
-- Seth.

See if this helps.
FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

Click at bottom of the first page:
Menu > Insert > Section break
Click somewhere in the 2nd page (not the header/footer)
Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
Click into the header or footer of the second page:
Menu > Insert > Auto Page Numbers…
If there is anything in the header or footer on the first page that you don't want just select it and delete it.
If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
Peter

[Forum FAQ] How to tell if the DAC port is automatically changed or not

Introduction
Per Books Online:
http://msdn.microsoft.com/en-us/library/ms189595.aspx
SQL Server listens for the DAC on TCP port 1434 if available or a TCP port dynamically assigned upon Database Engine startup.
Also, we can go to the following registry to specify the DAC port number manually:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQLServer\SuperSocketNetLib\AdminConnection\Tcp
The error log contains the port number the DAC is listening on. Besides looking at the error log, how to find which port is used by DAC connection and how to tell if the DAC port is manually set by us or assigned automatically by SQL Server?
Solution
The following query can be used to check if there is an existing DAC connection and it also give us the port number used by dedicated admin connection.
SELECT name,local_tcp_port FROM sys.dm_exec_connections ec
join sys.endpoints e
on (ec.endpoint_id=e.endpoint_id)
WHERE e.name='Dedicated Admin Connection'
Here is the scenario to test if the DAC port is automatically changed or not.
There are two instances are running on one server. I specified the same DAC port number 5555 for the two SQL Server instances by modifying the registry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQLServer\SuperSocketNetLib\AdminConnection\Tcp
Opened the DAC connection to instance 1. Executed the above query, it returns the result:
name
local_tcp_port
Dedicated Admin Connection 5555
Then, opened a DAC connection to instance 2. It throw out the following error message:
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Client unable to establish connection because an error was encountered during handshakes before login.
Common causes include client attempting to connect to an unsupported version of SQL Server, server too busy to accept new connections or a resource limitation (memory or maximum allowed connections) on the server..
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : TCP Provider: An established connection was aborted by the software in your host machine..
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Client unable to establish connection.
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Client unable to establish connection due to prelogin failure.
The above error message was thrown out because the DAC port number 5555 was not available for instance 2 which was occupying by instance 1. After restarting the SQL Server engine service of instance 2, if checking in the registry, you would see a new DAC port
number has been assigned to the second instance.
Then, the DAC connection to instance 2 succeed this time and executed the above query, it returned the same port number which is same as the one in the registry key and the port number was assigned automatically.
DAC port will not change even SQL Server service is restarted only if the TCP port is available.
More Information
http://msdn.microsoft.com/en-us/library/ms189595.aspx
Applies to
SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I tested your script after
establishing a DAC connection from SSMS 2014. It worked as described. Thank you.
SELECT name,local_tcp_port FROM sys.dm_exec_connections ec
join sys.endpoints e
on (ec.endpoint_id=e.endpoint_id)
WHERE e.name='Dedicated Admin Connection'
name local_tcp_port
Dedicated Admin Connection 1434
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Since upgrading Iphone to iOS 5.1.1 it does not automatically use wifi internet when wifi is available. It has been draining my mobile data. I can only manually change settings with cellular data everytime I get home. Any other solutions?

Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?

Please disregard this question. I'll submit a shorter and more direct question. Thanks.

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

Perhaps you are loading a template that has a text block already on it.
You might try the blank template option and set that as your go to template in your preferences

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed from 3 to 4. When LR's HDR merge brings a photo back into LR's library, the stack number does not change and the DRG version isn't included in the stack.

Hi,
The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
and convert your files to DNG.
regards,
steve

Titles are automatically changing length and shortening - imovie '11 version 9.0.2

Titles are automatically changing length and shortening no matter what I do. I'm using imovie '11 version 9.0.2 I have tried everything and they keep reverting back to random sizes. I have several 4 sec still pictures and I want the titles to match in length so I make them the same size but as soon as I move away or do anything else the revert back to some random size like 2.2s or 1.2s. I don't know why but it is very frustrating.
Thanks in advance.

It's been a month now and I just installed the new update (9.0.4) and it is still doing this. I took a screenshot of what it is doing. I want all of the titles to be the same length as the pictures. They are all 3.9 or so seconds. I drag the titles so they are the same size and then as soon as I do anything else it automatically changes back to this. Any Ideas? I just don't know why it's doing this and it's really bothering me. Please help!

Premiere CC Sequence length not automatically changing to last asset content.

Similar Messages

Maybe you are looking for