Premiere CS 6 Audio out one channel

Mac lion 10.8 with Blackmajic studeo 2 card premier cs 6 audio out only left channel but i want both left and right chanell how to ?

Try a different Audio CODEC first.
I am sure what you have chosen is not Default.

Similar Messages

???_Missing audio on one channel in Prem.Elem. 4 & 7_???

Hello everyone,
I have a problem concerning Premiere Elements 7 and I can't find a solution to it. Maybe one of you had this before and is able to help me out.
I have a project with several clips where I removed the original audio and added a soundtrack file to play along. The problem is that there is only audio on one channel when I play the scene in preview. Balance is set correctly, audio file is all right. If I look at the audio file in the audio preview window both channels are visible and play just fine. If I look at the audio mixer and start the scene preview both channels are visible in the peak meter but I still only hear one channel. It doesn't matter if the audio is mp3 or wave. I looked at the audio preferences (audio output mapping): when I change the speaker setup, change right/left channel for the output devices the missing channel changes to the other side. It seems it is somehow connected to these settings. But it's the same settings as with other projects which work fine. So it's gotta be a project-related problem. It's not only in the preview missing but also when I export the scene to file. It is only with this project, but it's too much work to rebuild it. I tried the project with Premiere Elements 4, but it's the same. Other projects work fine.
I'm running it on Win XP+SP3, Intel 2,8 GHz, 2 GB RAM, Nvidia 6800 GT, MSI 865 PE with onboard C-Media 9739A sound chip, lots of HD space.
Any suggestions on how to solve this problem would be very much appreciated.
Thank you,
Chris.

Thank you both for your answers. The audio file is stereo with different waveforms for each channel; I just checked that in Adobe
Audition. I also checked the settings of the audio card but there's not much I can change. After these problems occured I updated the
audio card driver to the newest version available. The audio files comes from the video clip I use in the sequence originally. I severed it from the video to edit it in Audition and re-imported it since Premiere Elements hasn't that much sound editing tools. The audio file is fine. There's no channel volume effect applied to the file. As I said I can load it into another project and everything works fine. Gotta be something in this project.
Ok, ok I found it! I was playing with the audio tracks and I moved the audio file to the soundtrack track and it works! Putting it back in Audio tracks 1 or 2, one channel is missing. Very strange behavior. Or is there a way to mute one channel on a whole track since it happend to all audio files in Audio tracks 1 or 2?
Anyway, it's gone and that's great. Thank you for your help!
Chris.

Audio - only one channel

Hi
I'm recording from my analog cassette deck to my mac os x 10.9.5, but get only one channel on audacity and garage band.
deck out - headphone jack -rca to rca mini jack mac sound input
I did read several posts, but to no avail.
I did play with AUDIO MIDI setup
I did play with SOUND ( SYSTEM PREFERENCES )
please help
thanks in advance
peace

Come on... It's just like a usb turntable, only a little better quality. What steps would you use to troubleshoot one of those?

Audio Problems - One Channel Slow and Sometimes Not At All

Hello,
I'm having a terrible problem, since yesterday - but not in the weeks before. The audio tracks are acting very strange. Sometimes one channel plays normal while the other plays at a reduced speed. Sometimes no audio comes out at all. And when this problem starts happening I continually get the 'Warning - Dropped Frames' box every few seconds.
Strange thing is that last night I was having this problem, and although repairing permissions, and trashing preferences didn't seem to have an effect, after moving all the media to a single location it seemed to be working fine. So, somehow, everything was working great last night when I finished working.
I come in this morning, open the same project that was fine upon closing down last night, hit play and one channel's slow, then it doesn't sound at all, then I don't even get sound in the viewer when I open clips there. And now it's constantly stopping with a 'Warning - Dropped Frames' box.
The system is new as of a month ago, everything was working fine on the first project I did.
The Sequence settings and media settings are all correct - that doesn't seem to be the problem. And There was no problem working on the last project with all the media coming off the 500GB internal hard drive, so I can't imagine I'd need to get an external just for it to work.
My intuition thinks it may have something to do with some of the video clips using time remapping, but the main audio that's causing the problem is a music track, not associated with any of the video (so it shouldn't be linked in any way).
I'm using Final Cut Studio 2, with full updates, etc. on a 24" iMac 2.4GHz Intel Core 2 Duo, with 4GB RAM, 500 GB internal hard drive (100GB still available), running OS X 10.4.10.
Please help,
the system is basically useless until this is fixed,
Thanks,
Matt Morreale
www.yogamayafilms.com

Matt,
I just read your post... I am having the same issue. You have explained the issue better than I did in my post. You can read my comments under the subject Final Cut Pro 6 Drop Frame Issue... As you will read, my issue started last weekend when I upgraded to Leopard. Yesterday, I spoke with Apple Tech (Final Cut Pro Support)... They had me do a clean install of Leopard and re-install final cut studio. Once that was complete, do the software upate. Problem still existed. I then called them back and they had me do a clean install of the origianal OS software from the disk that came with my Mac Pro. I than re-installed Final Cut Studio and did the software updates... I still have the same issue.. And like your post stated, I can be in a project and the sound is perfect and then hit the play bar again and the sound is either distorted or it is like an echo where the track is playing and sounds like a second track is right behind it. (Almost like listening to a radio talk show and the person has the radio on and you can hear the time delay of their conversation.
The Apple support team told me to go into the user preference inside final cut and uncheck the following boxes...
Report dropped frames during palayback
abort ett/ptv on dropped frames
abort capture on dropped frames
They said by removing the checks on the three items above, I would stop receiving the Dropped Frame Error Message (until i unchecked the boxes), I would get the error message every 29 frames when trying to play the clip in the timeline. However, by remiving the checks, I still have the issue with the audio...
Question, Have you updated your software, and if so is that when the problems started occurring?
I agree with your comment "the system is basically useless until this is fixed", Please keep me posted,
Thanks
jbk

Detached audio records one channel only

Video clip in event library plays two channels audio
Normal
But dragged into project as a VoiceOver it only plays on the left channel
Big drop in audio level
Desperately seeking solution

Hi
No not in iMovie 6.0.3 - but
You can export out as QuickTime expert mode - here select audio only and as .aiff
This file You can edit in any audio editor eg Audacity (free on internet) and then
save and re-import into iMovie.
or
As I remember it You can even out in GarageBand - but I've never done that.
To me the Export to Audacity (or other audio editor) and re-import is easiest.
Yours Bengt W

Recording audio from a Channel Send

I've done this before, but I can't seem to do it again.
I am trying to record audio from one channel (which is using an audio instrument) to another channel (an audio channel) using an audio send. I am not having a problem setting up the send. I am able to hear the audio correctly and independently on both channels. The problem occurs when I try to record the audio, because there is no "record" button on the channel header for me to arm the track. The track is set up as a "record-enabled" track, but in the space where the other tracks have the record button, there is just a empty space on this tracks header. Does anyone know why this is happening? Any help would be greatly appreciated.
Thanks.

Well,
I seem to have found the problem. It appears that "audio tracks" will not allow you to arm them for recording unless there is a possible real audio input device connected to the computer. I plugged in my Snoball mic, allowed Logic to set it up as a device, and the record button magically appeared in the track header.
Hope this helps anyone else who is having a similar issue.

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos?        ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374

In FCPx how do you invert the phase of one channel of audio?

I talked with my engineer friend and he listened to and tested the audio on my project. He said one of the channels was out of phase and that is why I'm getting no audio on my wireless audio recording being played back on android phones. He didn't know how to tell me to access fcpx to make the change to the one channels phase. Any help is greatly appreciated!
p.s. I want to thank Luis Wequeira and Tom Wolsky for getting me to this point.

IF the problem is inverse phase, all you need to do is switch either the left or right, which will put whichever one you switch back in phase with the other one.
HOWEVER, as a test, if you hit the "Make Mono" button in the Gain effect BEFORE switching the phase of either channel, it will combine the two channels. If they completely cancel out during playback, phase was your problem with the phones. If it doesn't cancel out though, your problem isn't phase. Again, I doubt a complete lack of audio is due to phase issues, but test it out.
On a more technical level, neither channel is actually out of phase when people talk about two channels being 180 degrees out of phase. One of the channel's polarity is reversed, meaning the voltage, bits, or whatever, is increasing when it should be decreasing and decreasing when it should be increasing. The audio channel is doing the mirror image of what it's supposed to be doing. Being out of phase actually refers to one of the channels being moved in time in relation to the other channel, which is a different thing entirely.

Playing multiple stereo channels out one single mono channel tia sal22

Greetings All
I have a vi which creates multiple stereo audio signals
in labview 8.6.1 and I would like to play all of the stereo channels out one single Mono channel
is this possible? I tried setting all the device ID's to the same thing but a lot of clicks and pops occurred. Basically I'm trying to play and mix all the signals out one mono channel at the same time.
Please note I would like to have each signal that is created played over
the mono channel at the same time.
tia sal22
Solved!
Go to Solution.
Attachments:
lvt_audio_realtime-out left right device ID test onw while loop.vi ‏69 KB
stereo_to_mono.png ‏63 KB

sal22 wrote:
Thanks but which options allows me to do this
tia sal22
Just add the arrays if they have the same length. Use the standard add function (like in 2+2=4). Then arrays are added each index is added together
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

ONLY ONE CHANNEL OF AUDIO WITH SONY PMW-200

Hi,
When I automate to sequence using video shot on my Sony PMW-200 I only get one channel of audio, when the preset in Premiere clearly states 8 channels of 24 bit audio. If I drag a clip to the timeline all 8 channels are there, but then I have to trim the beginning and end of each clip in order to do transitions, which would take forever on a wedding video. There must be other PMW-200 users who have this same problem. I am shooting in UDF mode 422 at 50 mb/sec on the Sony and just updated my Premiere CS 6.
Thanks,
Ed

similar question, I found a thread that may solve your problem: Sony PMW-200 file import into Premiere Pro CS6 only get 1 Ch. audio, you can go for a look. Or you can try some converters to help you. Handbrake, any video converter, ffmpeg,imixmxf, transcode them first, then reload into premiere.

Computer only plays one channel of audio

I use an HP Sleekbook 14 PC and recently it stopped playing out both channels of audio. I only get one channel. Any easy fixes?

Hello, @festerdude
Welcome to the HP Forums.
It appears you've lost audio. I will try to help you with this.
No Sound from the Speakers (Windows 7)
No Sound from Speakers (Windows 8)
Follow the document for the version of Windows installed on your notebook.
Make sure that you've updated the drivers, use the HP Support Assistant for this.
Please let me know the results and if you run into any issues.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

PREMIERE PRO cs3 & cs5 - audio out of synch by 6 frames after export

i have never had formal training on adobe premiere, and therefore when i am working with my students it is basically down to expereince i have gained by myself.
with cs3, we always worked on the basis that it would always export the audio out of synch with the video by 6 frames so they would routinely have the audio tracks on two separate tracks, one for editing and one for exporting which was offset +6 frames.
when we made the transition to cs5 and new kit i was stunned to see that the synch issues were still there. and since a quick google yielded very little evidence that others shared this issue i thought it must be something i am doing wrong after years of bad habits learned on the fly.
so here is my workflow, where am i going wrong and why is it always out of synch?
open cs5
choose an editing format. (this varies but the synch issue is always the same)
import content
edit
export (normally as a microsoft avi, with no compression which i later convert into quicktime compressed with ANIMATION)
i teach on an animation course so normally the content we import is a sequence of stills such as jpg or tiff, but we also capture stuff on dslrs too
the timeline colour is normally yellow, which is fine at standard def, but larger def we will render workspace to turn it green
the editing format depends on our target format. the current project is 720 hd
the export as avi with no compressor i suspect to be a weak link in this work flow, but the problem remains if i export as anything else so....
now as an additional point on the matter, the current project we have had people miming to an audio clip which we played live for their performance. the audio blips were aligned on the timeline with the audio blips from the edit
but after rendering out, the footage is out of synch by 6 frames. it has always been this way.
any thoughts? i know i must be doing something wrong, but the issue is consistant across different computer, running different OS and different versions of PREM...so either i am doing it wrong or premiere is fundamentally broke.....i suspect its me though

is there a logical reason for opting for a preset which is the lowest common denominator rather than a highest? is it not better to work at the best res possible?
does it matter either way? because i have often created 1080p content and worked in a 1024/576 edit environment only to later export at 1080p with no loss of quality?
i create the avi and then open this in quicktime to export to the desired formats.
now that you posted that comment i cant believe i have never done the simple trouble shoot of 'at what point does it go out of synch'
files are too big to playback uncompressed though.
i know it is a workflow issue and not a prem issue because no one else seems to have the problem.
im going to run some tests
thanks, will report back

My ipod nano has poor audio output on one channel

I have an ipod nono Model PC694LL, version 1.2PC, and the audio on one of the headphone channels is weak, i have tried at least 3 different headset with the same results, Am i just out of luck and the unit is faulty

This functionality is not available on the iPod Classic and it's unlikely that it could ever be added in the future. The iPod Classic line hasn't received any firmware or hardware upgrades over the past couple of years.
A different solution would be to purchase a set up mono headphones.
B-rock

Exported Audio Voiceover Only One Channel

I created a quicktime screen recording for a screencast/tutorial using QuickTime X.
Brought that clip into FCPX, added some music, a few transitions and some motion graphics/titling.
Exported to h.264 and I'm getting stereo from the music track, but the voiceover is only on one channel.
So I go to audio settings and batch change everything to Mono. I noticed that there are surround sound settings, that is, multiple audio 'tracks'.
Export and only one channel.
When I monitor in FCP X I heare the audio out of both channels.
When I export it using FCP X H.264 to quicktime: Audio Only On One Channel
Killing me.
So I I loaded the H.264 exported clip into QuickTime Pro 7
Anyway, In QT 7 I changed all the settings for audio (properties) and turned every channel that showed up to mono, saved as and the QuickTime file now plays voiceover audio on both channels. Yeah!! So it seems.
So I save as in QuickTime 7 and when I play in QuickTime 7 I get the Soundtrack/Voice over audio on two channels.
But when I open it in QuickTime X (or upload the file to YouTube/Vimeo) the voiceover only comes through on one channel. Keep in mind that the stock Music does play through both channels!

duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

Only getting one channel of audio with mic HELP

I had been using Garageband with the built in mic to do my podcasts. I just got some real gear.
Here is what I got... M Audio USB fast track, MXL V63MBP running on 10.3.9
I am only getting one channel of audio through the mic. I have the settings on the mixer right and I have gone in the sound preferences and made sure it was right.
On the track in garageband, I made sure that the real instrument settings were set to Stereo. I have been messing around with this thing for an HOUR and I am still only getting one channel of audio. I've done everything I've been able to come up with in google and still nothing works. If anyone has any ideas ,that would be swell because I'm beginning to think that the crappy built in mic on my mac is looking really good about now.

You're welcome.
The common confusion is that 'Stereo" means two speakers and "mono" means one. Stereo actually means two different signals going to the two speakers. Since a Mic is a mono input device, you set the track to mono so that the same sound comes out of both speakers. Enjoy --Hang

Premiere CS 6 Audio out one channel

Similar Messages

Maybe you are looking for