Premiere CS4: Befehl "Videoüberblendungen anwenden"

Hallo zusammen,
ich habe in Premiere CS4 das Problem, dass ich die Befehle "Videoüberblendungen anwenden" und Audioüberblendung anwendungen" im Menüpunkt Sequenz nicht anwenden kann (Grau hinterlegt).
Ich habe vorher Premiere Elements 8 benutzt. Die mit PrE 8 erstellten Filme habe ich in Premiere CS4 fertig bearbeitet. Hier waren die Befehle "Videoüberblendungen anwenden" und "Audioüberblendungen anwenden" nutzbar.
Filme, die komplett mit Premiere CS4 erstellt wurden, können diese Befehle nicht ausführen.
Weiß jemand, wie man diese Funktionen einschalten kann?
Die Filmclips sind alle in AVCHD.
Vielen Dank im voraus für die Antworten.
Gruß
leznem

Hallo Wiro,
Dein Punkt 1.) war genau der entscheidene Punkt.
Danke!
Gruß und ein frohes neues Jahr!
leznem

Similar Messages

Premiere CS4. Video-individual images freeze. abrupt change from frame to frame.

Hi
I'm working with Adobe Premiere CS4... windows XP prof SP3 4GB RAM. ATI Radeon 38XX Graphic
my problem is as following: working window: the projection of individual frames in a movie doesn't run smoothly, the change from frame to frame is abrupt, almost robotic...it also freezes occasionally .. sound is fine though.
I've reinstalled all recent graphic and sound drivers and also latest updates but the problem is still there...
Please advice A:S:A:P
Thanks,
Elena

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size

Premiere CS4 exported videos for ipod all show black screen when played

Hi,
I am trying to export a video for an ipod from an mp4 source file.
The project settings are set to ipod and so are the export settings. I get a normal video file (mp4) with the right resolution etc. The sync with itunes works without problems and i get the right thumbnail of the video in the Ipod menu.
But when i try to play the video i only get a black screen, the timer is running and i have sound.
I think i have tried all the possible settings. None of them worked.
Can you help me? Where is the problem?
Thank you

export to a regular .wmv file, or any other type you want.
now use a program like this one:
http://www.imtoo.com/ipod-movie-converter.html
If you have deep pockets you can try Sorenson Squeeze.
or you can try this one
http://www.xilisoft.com/ipod-video-converter.html
unfortunately this doesn't solve your problem the way you wish. ( a free fix )
I'd do a good Google search for answers, with some good keywords, and you may find
a solution that won't cost you anything.

Weiche Überblendungen in Premiere CS4 werden zu hartem Schnitt bei AVI-Export

Beim Export einer geschnittenen Sequenz mit dem Media Encoder werden die Titelüberblendungen "Schwarz überblenden" nicht gerendert, sondern zu harten Schnitten. Bei der Ansicht in Premiere werden die Überblendungen richtig angezeigt, beim fertigen AVI-File sind die Überblendungen verschwunden und sind harte Schnitte. Hat jemand eine Idee, woran das liegen könnte und - vor allem - wie man das behebt?

Woran es liegt kann ich leider nicht sagen, aber zwei Lösungsmöglichkeiten anbieten:
Im Media Encoder CS4 gibt es bei den Exporteinstellungen in Höhe der Registerkarten "Filter / Multiplexer / Video / Audio / Andere" am rechten Rand eine unscheinbare Schaltfläche über die man u.a. steuern kann, ob man bereits vorhanden Vorschaudateien verwenden will. Diesen Punkt mal aktivieren: erstens ist der MediaEncoder dann schneller fertig, weil die bereits in Premiere gerenderten Vorschaudateien genutzt werden und zweitens sollten dann auch alle Effekte wie gewünscht im Export-File vorhanden sein.
Aufgrund der diversen Schwierigkeiten mit Premiere CS4 und dem MediaEncoder CS4 nutze ich für mich persönlich einen ziemlich sicheren Umweg: Alles, wofür ich nicht unbedingt Premiere CS4 benötige, erstelle ich in Premiere CS3 und exportiere es von dort direkt (ohne MediaEncoder, das geht da nämlich glücklicherweise noch!) als AVI-File. Das finale AVI-File (mit allen Tricks, Effekten und Blenden) übergebe ich dann je nach Exportwunsch an den MediaEncoder von CS3 oder CS4 zur Weiterverarbeitung.

Why does Premiere CS4 fail to import video files from my Samsung Galaxy Note 3?

I've acquired a Samsung Galaxy Note 3. It takes supherb HD video 1920x1080. But when I attempt to import the clips in Premiere CS4, I get the unsupported file error message. Am I missing a format spec in my project setup menu list? Or do I have to convert the files before importing and with what?

Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Find file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

How to import youtube video into premiere cs4

I installed adobe premiere cs4 and was really astonished by the fact that it's not possible to import a video downloaded from YouTube, but it is needed to convert it firstly. This application is weight about 3GB on my hard disk and now I must search for a plugin to import a video from YT.
It would be perfectly if i could download a video directly into premiere, and also upload finished file up to youtube.
The only result of my search is a paid plugin named moyea-importer - USD 70, but it seems it works only with earlier versions of premiere, before cs4.
Is there any free plugin for this task. Or any similar solution.
If not - in which format should I download youtube video, in which format should I convert it (what is the best converter for that) to make it editable in premiere.
Working on win xp sp3.
Thanks.

Also, CS4 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous?view=all
Maybe a MOD will come along and move this discussion to the correct forum
As Mark says, CS4 is old... and CS5 and later were complete rewrites of the source code, to be 64bit instead of 32bit, so internal operations are not the same

Getting 16bit video into Premiere CS4

Bear with me, as I'm sure I am a super noob. I went and did a bad thing...I think. I told a non-profit that I would make a video for them to sell for charity. The video is going to be a combo of video, stills, etc and I went ahead and shot all videos with my Nikon D90 camera. Settings were apparently set to standard and then I went out and picked up Premiere CS4 to take the video to the next level. I come to find out the video was taken in 16bit NTSC format and the program wants a minimum of 32. Is there anything I can do to get the videos I have into the Premiere workspace to create my video? Is it possible to up-convert? I've read about converting to TIF files, but I am going to need the audio off the video as well. I have to think there is a way around this somehow.
If you have any input whatsoever, it would be greatly appreciated. I'm behind schedule as it is and this is only setting me back further. Really hoping there is a quick fix out there. *crosses fingers*

I'm not even seeing MJPEG as an option when I start a new project. Does that mean I do not have a proper CODEC installed?
How does MPEG Streamclip stack up against the two you mentioned?
Thanks again!

Best Video Card for non 3d/compositing work in Premiere CS4?

Hi all, I'm looking to optimize my system where I can to speed up the editing process. I edit 1080p footage from the Canon 5D MKII (h.264 MOV files)using half-res h.264 proxies, but CS4 seems to hang a lot in the timeline view and clips just disappear and instead show green. I'm switching to half-res MPEG-2 (.m2v) proxies now and so far that problem seems to have gone away (still testing), but when timeline display quality is at "High Quality" (vs. automatic) there's still some chop during slow pans (not seen with "Automatic" or "Draft Quality").
Anyway, I'm looking for the weakest point in my system and suspect the video card. My system is an 2.66 i7 processor, 6GB 1333 ram, 1x160GB sata II HD (OS/Apps), 3x1TB SATA II RAID 0 (paging file, data), and an $80 ATI 4650 512 MB video card running Vista 64.
So all that said, what's the best general graphics card for editing HD video in Premiere CS4? I don't care about 3d or compositing at this stage, just basic editing of unrendered (timeline playback) HD video, maybe sometimes 1-3 HD layers, some basic color correction effects (b+w, contrast, etc), dissolves, text overlay, some clip speed manipulation.
Many seem to recommend the Nvidia quadro cards, but I haven't found any information to suggest they help with anything other than 3D/compositing, which I don't need (and therefore don't need to pay the premium).
There's also the Nvidia CX card, but it's main feature is touted as encoding h.264, whereas I could care less about that and ideally need decoding of h.264 in the timeline to be better. I haven't seen any great reviews on this card of heard of average user testimonials, probably because it's $2k and it mainly marketed as "zoom more fluidly in photoshop, export h.264 4x faster", which seem like minor issues vs. "better realtime playback of HD video".
I sort of rambled, but if any informed CS4 users can help answer the question regarding the best video card for general CS4 editing use (not 3d/compositing stuff) I'd love to get more insight.

So in Media Encoder CS4, I tried encoding one of the clips that plays back the least smooth in the Premiere timeline (a slow pan across intricate patterns on a sand dune in death valley) to the following:
Format: P2 Movie, Preset: DVCPRO HD 720P 30
(this was the only format in media encoder that mentions DVCPRO HD)
I noticed when trying to customize the setting, that there is no 30 fps option, just 23.976, 29.97, and 59.94. I just went with 29.97 as that was the closest to the 30 fps of the source MK II footage. The width and height were also unajustable at 960x720 for the DVCPRO HD format.
Playing the output in the timeline view of Premiere was comparable in smoothness to the m2v file. I looked at my resource monitor during playback looking for bottlenecks, and the CPU does seem to spike at 100% initially when playing this clip back. I reverted to the m2v version and also saw the same CPU spike. I also reverted back to the down-res'd mp4 version, same spike. Moving display quality down to draft does allow for smooth playback here.
So I guess there's something about this clip that is CPU intensive to play back in the timeline in any of these formats. The original 1080p version plays back perfectly in both quicktime and VLC player.
Anyway, for now I think I'm content with using the m2v proxies as a big chunk of the clips are fairly smooth, and using a reduced quality display mode for clips that don't play as smoothly is accpeptable for now. At least so far I'm not seeing the hanging/video not displaying (and instead showing a green screen) that I was with the mp4 proxies.
If anyone has any other suggestions as to how to get smoother timeline playback for these proxies (or the original h.264 .MOV files), however, whether it be a hardware upgrade (e.g. better video card) or a different proxy codec, I'd love to hear them and give it a shot.

Premiere Cs4 crashes after adding second layer of video.. Help...

hello Your help is appericated..
I have an Ideapad y570 with windows 7 8gig ram and 1 gig nvidia geforece card... I have installed premiere cs4 and told my graphics card to give premiere all the joice it needs.. then when i add a second layer of video (not audio, audio layered fine...) premiere gave me the simi white screen and then crashed... I tried restarting and many other things.. I tried reinstalling the software thing that might changing things.. no effect.. any ideas or help? this laptop is ment to run well.. all of my other cs4 software is rockin fast.. but not premiere oh i need help..
you would be my hero if you could help me...
blessings
Andrew
[email protected]

my laptop specs are as follows
2nd generation Intel® Core™ i7-2670QM Processor ( 2.2GHz 1333MHz 6MB )
Genuine Windows 7 Home Premium 64
NVIDIA GeForce GT 555M 1GB
8 GB PC3-10600 DDR3 SDRAM 1333MHz
15.6" HD Glare with integrated camera 1366x768
Integrated 2.0MP Camera
Industry Standard Touchpad
500GB 7200
DVD Recordable (Dual Layer)
6 Cell Lithium-Ion
Intel 1000 BGN Wireless
Bluetooth Version 2.1 + EDR
Bluetooth Version 2.1 + EDR

Premiere CS4 unlinking and ungrouping video on close

I'm working on a video editing terminal running Premiere CS4 v4.2.1. You can do any sort of grouping, linking or unlinking of video clips that you want, but as soon as you close the program (and then go back to it later), all of the clips are unlinked from their respective components (audio and video are unlinked) and any groupings you made are now gone.
What's weird, though, is any clip that you don't touch (ie you don't group it with something else) is fine when you reload the project (the audio and video clips are still linked together like they should be, but ONLY if it wasn't grouped).
All the video is on the local, internal hard drive. The scratch disks are also on the internal hard drive. The computer is running Windows 7 Ultimate 64-bit.
Any ideas?

I'm working on a video editing terminal running Premiere CS4 v4.2.1. You can do any sort of grouping, linking or unlinking of video clips that you want, but as soon as you close the program (and then go back to it later), all of the clips are unlinked from their respective components (audio and video are unlinked) and any groupings you made are now gone.
What's weird, though, is any clip that you don't touch (ie you don't group it with something else) is fine when you reload the project (the audio and video clips are still linked together like they should be, but ONLY if it wasn't grouped).
All the video is on the local, internal hard drive. The scratch disks are also on the internal hard drive. The computer is running Windows 7 Ultimate 64-bit.
Any ideas?

Premiere CS4 effect switch for each video channel

Premiere CS4
Windows
Gentlemen !
Does anyone know if there is a Master Effect Switch for each individual video channel
What I am saying is, is there any way to turn Off or On the effect for each individual video channel
Let's say I wanna turn Off all video effects for video channel 1
Just similar to the icon of the eye or lock for each channel
I have about 40 clips on channel one's timeline , I wanna turn all effect Off for a minute, check something the turn it back On !
Thanks

With the Nested Sequences, turning thing OFF for performance would be easy, but Nesting does take some additional Resources.
For a Feature Request, see this LINK.
Good luck,
Hunt
BTW - some Effects hardly seem to slow things down, while some are quite resource heavy. For playback, Rendering the Timeline normally makes things very smooth, at the expense of the time to Render.

Problems with Premiere CS4 video

Just purchased Premiere CS4. When I import video (avi or mpeg), what appears in the preview monitor or the timeline monitor is greatly distorted. Audio is great, it's just the video that I'm having trouble with. Running it on XP with 3.4 GB of memory. Any advise would be greatly appreciated.

So would some information. AVI and MPEG mean nothing, they are just containers that can hold anything from scrap metal, toxic chemicals, food, clothing, electronics, spare car parts, tapestry or God knows what. Unfortunately PR can only handle certain contents, so you need to know what codec is used.
Look here and answer at least the 16 questions at the end of the Wiki article: Some suggestions

What video codecs can be used with Premiere CS4?

What video codecs can be used with Premiere CS4? Or are there to many to list? I'm looking for a solution to import a .AVI file created with a H.264 codec.

PrPro can work with so very many, but certainly not all. Some, like DivX will work for Export, but I have never gotten good Import of that material - always something wrong somewhere.
For H.264, there are three very popular versions: Apple, Lead and MainConcept. The Apple version installs with later versions of QT Player, the other two are available, and many users like them better. They solve some H.264 problems, mainly with Export.
For a bit of background, you might find this ARTICLE useful.
Good luck,
Hunt

Video audio problem when import to premiere CS4

I have a file encode by flash media live encoder and I try to edit in premiere CS4 but when I import the file the video audio is not synchronised. The recorded file play run good in adobe media player. Any sugestions? Thanks in advance.

Going back a bit over a year, there was a thread on this forum, where the OP needed to use the Flash Live Recorder, as there were both streaming material from lectures and then edited material to go up on their intranet Web site for later viewing. That poster had similar issues with the live material, IIRC.
I am certain that this thread was after the forum change over, so should still be on the servers. Wish that I could recall more details, but in the end, the OP found resolution to the problem. I know that I participated, but from the side lines. Seems that there was even footage of a rock performance involved in the feed and I edited the FLV material on my PrPro 2.0 with Moyea FLV Importer for Premiere plug-in. I'll look in my e-mail and YouSendIt account to see if I can find the poster's name (might not be his Adobe screen name), but a Search of this forum ought to turn up something. I'll also do a Search and maybe between us, we can find that thread, as there might be some useful tips in it.
In the meantime, maybe this ARTICLE can help you edit the OOS issues.
Good luck,
Hunt

Con il pc portatile asus k73s processore intel core i7 2.2 ghz ram 6 gb -scheda video nvidia geoforce gt540m 1 gb di ram premiere cs4 versione 4.0.0 non gira - va in blocco - aiuto

con il pc portatile asus k73s processore intel core i7 2.2 ghz ram 6 gb -scheda video nvidia geoforce gt540m 1 gb di ram premiere cs4 versione 4.0.0 non gira - va in blocco - aiuto

con il pc portatile asus k73s processore intel core i7 2.2 ghz ram 6 gb -scheda video nvidia geoforce gt540m 1 gb di ram premiere cs4 versione 4.0.0 non gira - va in blocco - aiuto

Premiere CS4: Befehl "Videoüberblendungen anwenden"

Similar Messages

Maybe you are looking for