Premiere CS4 effect switch for each video channel

Premiere CS4
Windows
Gentlemen !
Does anyone know if there is a Master Effect Switch for each individual video channel
What I am saying is, is there any way to turn Off or On the effect for each individual video channel
Let's say I wanna turn Off all video effects for video channel 1
Just similar to the icon of the eye or lock for each channel
I have about 40 clips on channel one's timeline , I wanna turn all effect Off for a minute, check something the turn it back On !
Thanks

With the Nested Sequences, turning thing OFF for performance would be easy, but Nesting does take some additional Resources.
For a Feature Request, see this LINK.
Good luck,
Hunt
BTW - some Effects hardly seem to slow things down, while some are quite resource heavy. For playback, Rendering the Timeline normally makes things very smooth, at the expense of the time to Render.

Similar Messages

  • Monitors for each video track?

    Is there a way to have seperate Monitor windows for each video track, so as I scrub through a Sequence I can have a preview of what is on each  track all at the same time (without using the Multi Camera editor)

    What I do is find a sync point in the first clip and add a numbered clip marker to that point (for example, a camera flash or a music hit), and then edit it into the sequence. I do the same for the next clip(s), using the same numbered marker, and add those into the sequence. When I've added all the clips, select them all, and go to Clip > Synchronize > Numbered Marker, selecting the numbered marker that is common to all of the files. Once you hit OK, all of the clips will be synced around that point.
    Definitely easier than looking at a four-up display and trying to figure out which one is which, IMO.

  • How can I combine 3 bitmaps? However, it should be each bitmap for each color channel, RGB

    How can I combine 3 bitmaps? However, it should be each bitmap for each color channel. RGB
    How can i do it by AS3 ?

    bitmap1 will supply the red for the final bitmap, bitmap2 will supply the green value for the final bitmap etc?
    if so, loop through the final bitmaps pixels and assign values using setColor() or setColor32 and the bitwise operators to extract and add rgb values.

  • Video Playlist with description for each video

    Hi all,
    I'm trying to create a page for one of my clients where I will store a bunch of videos. I came up with something like this.
    http://www.relationsmith.com/gunnery/media/gunnery-media.html
    You click on each button and you watch different videos. Pretty simple! Now my challenge is this:
    I would like to display different descriptions for each video whenever the viewer clicks on one of the buttons with the video names. If anybody could give me any clues about this I'd really appreciate it.
    Veli

    kglag,
    Thank you so much for your answer.
    I am very new to xml. Could you give me an example of supplying the data to the SWF.
    Regards,
    Veli

  • Premiere CS4 "Save As" for Avid or FCP

    Hello,
    Is there a way to save my composition or sequence for Avid or FCP .
    My buddy works with Avid and FCP and he wants me to send him my composition or sequence so can work on it.
    I use Premiere CS4.
    Thanks

    Ex Malterra,
    > I'm curious as to which versions CS4 can save an FLA as.
    Flash CS4 can save FLAs as CS4- and CS3-compatible files.
    (By
    comparison, Flash CS3 is able to save CS3- and 8-compatible
    files. Flash 8
    can save 8- and MX 2004-compatible files, and so on, back.
    Always the
    current version and the version before.)
    > some customers require the version to be 8. For this and
    > other reasons we need to be mindful when considering
    > upgrading.
    It can get tedious, but if you're using CS4 and want to save
    for Flash
    8, you'll have to Save As CS3, then open that file in CS3 and
    Save As 8.
    Keep in mind -- and this isn't new to CS4 -- you always risk
    losing features
    when you save to a previous version of Flash. For example,
    Flash 8
    introduced blend modes. If you use those and try to save your
    file as an MX
    2004 file, you'll lose that particular feature.
    > Also, will CS4 allow us to create files as either AS2
    (gotta
    > have that Tree component!) or AS3 in the same way that
    > CS3 does?
    Yes. Flash CS4 supports all the versions of ActionScript as
    Flash CS3.
    That said, you can always use 3rd party components to meed
    your needs, if it
    comes to that. The Yahoo! Developer Network features free
    (BSD license) AS3
    UI components for Flash here, including a Tree:
    http://developer.yahoo.com/flash/astra-flash/
    David Stiller
    Co-author, Foundation Flash CS4 for Designers
    http://tinyurl.com/5j55cv
    "Luck is the residue of good design."

  • CS4 Premiere Pro EXPORT settings for embedding videos in PDF

    I am trying to embed a few short videos into a PDF ebook and my PDF file size is massive.  I want the videos to still look good quality as I put a lot of effort into making high quality videos for my ebook. 
    Does anybody have any advice for export settings in Premiere Pro for the use in PDF documents?  I've played around with the various preloaded export settings but I'm wondering if I can customize the settings to look good in a PDF. 
    (I realize Acrobat will convert the video into flash for consistent play-black)
    (And not sure if this matters but my current videos are 60fps 1280 x 720 HD shot with a Canon 7D)
    All advice would be greatly appreciated!!

    Unfortunately, you have posted to the Pr (the precursor to PrPro) forum, so you'll likely not get as much traffic for your thread, as you would in the PrPro forum. Maybe our tireless MOD's can move it out for you, so you'll get more "eyes." Here is the Adobe Premiere Pro Forum.
    Good luck,
    Hunt
    Oops! It looks like Adobe has changed the forum structure on me. Ignore my reference, as things changed overnight. Mea culpa, mea culpa.
    Message was edited by: Bill Hunt - Added last line.

  • Adding Audio from a Premiere Layer into AE for music video

    Hello All,  My situation is this.
    I'm doing a Dance remix Music video.  The original song was a ballad. The footage used for the Dance Mix consists of both the ballad clips sped up (ballad music was at 61 beats per minute) and footage shot to the dance track (127 BPM) all of which is Green screen. 
    The way that I approached it was to put the .wav song on one track in Pre Pro and then I synced up the rough mix edit clips to the main music track, time stretching the Ballad clips, making the mouth movements match and body movements move in rhythm.  After I got all my rough edits done I discarded their audio tracks as I thought that I would not need them further, and it was too many tracks to look at (Pre Pre could use a Shy switch).  So I ended up with one Audio track and 12 Video tracks, each track containing one pass of the filming.
    Then I selected each rough edited clip and used "Replace with an AE composition".  In AE I then did my green screen keying.  One Scene I created was a composited club scene in AE where the artist is on a stage and there are flashing lights behind her using several instances of CC Light Sweep on a Solid Layer.  When I Dymically Linked back to Premiere the light sweeps were not in rhythm with the music as I had no audio to listen to in AE.
    Its a lot of render time tweaking in AE and then going to Pr Pro and having to wait for more rendering to see the results.
    My Question is how would I go about  putting the audio track into the AE Linked comp.  The song is over 5 minutes and most of the clips are a few frames to a couple of seconds long.
    I think my approach was wrong in the first place and that I should have made an AE project the length of the song and done all my editing and compositing in that one Comp instead of putting things in Pr Pro first, which now makes sense, since I don't see any benefit of being in Pre Pro at this time.  And I don't see any way of including part of the audio track when making the AE Linked comp.
    Thanks

    I don't really get the problem, I must admit. If the final audio exists and the clips have been mangled correctly in Premiere, the timing should match in any case. Why would you even need the clip's source audio? The way to work in AE is to simply create an audio preview and place markers on important cues by hitting the multiply key on the numpad while the sound plays... Everything else shouldn't matter.
    Mylenium

  • Premiere CS4 effects problem

    i have recently upgraded from CS3 to 4 and have been experiencing lots of issues with a project that begun life in CS3, the first of these were a problem with AEP files (with keylight) not appearing or rendering from Premiere. So I rendered off all teh AEP files as quicktime with alpha and used these files in the project instead.
    Now I am applying sharpen and contrast and brightness effects to these Movs and they appear to go all blurred in the Project, CS3 used to do this, but on the final render all appeared OK. It new seems that when I render in CS4 the blurriness is taken into the render and the final movies look awful.
    Any ideas? It took me 60 hours to render all these quicktime files out of After effects and I'd rather not go down the route of having to do all that again.
    Many thanks in advance
    Paul

    assuming the problem is only in adobe apps and not anything else right?
    Hmm...
    Well, you can try some of these things
    trash the prefs and clean media cache, though I doubt it will help you in this case
    try with a new project and see if the problem persists
    uninstall ALL plugins and see if that corrects the issue (clearly HFX5 was never meant for CS4 at a minimum and I'm not a fan of old boris stuff - very buggy)
    uninstall and reinstall the Adobe apps and see if that fixes the issue.  If it does add back in CS4 compatible plugins only one at a time and see if the problem returns.
    also what os are you using and how much memory do you have?  could you be running out of memory on a 32bit os?
    Dennis

  • Premiere CS4 won't play any video - Overlay?

    Hi, since installing Prem CS4 on Windows 7 when I try to play video through premiere the audio is fine but the video won't stays at a frozen frame. If I scroll the timeline the video moves through but doesn't play at all in the preview bin or in the main source window. All clips play in media player perfect and before with XP. It feels like an graphics overlay sort of problem, I have a Nvidia quadro FX 500 witht the latest drivers upgraded by Windows 7 but don't see any overlay settings in or out of premiere. Any suggestions?
    thanks guys

    Magic Hat,
    Glad that you got it sorted. I've found that sometimes just asking a question immediately leads me to the answer - even before a response. I saw this all of the time in civil engineering. Just walking into another office to ask the question, often lit the lightbulb.
    Good luck, and unfortunately, you can't award yourself "points" for the correct answer.
    Hunt

  • Premiere CS4 - how to duplicate left audio channel to right

    I am editing old footage in which the audio signal is on the left channel only - the right channel is empty. I want to duplicate the left channel on the right so the sound comes out of both speakers. In Premiere 2.0 this was easy: right-click on a clip, choose audio options, then 'Duplicate left', and that was it. I can't figure out how to do the same thing in CS4.

    FAQ:How do I create mono/stereo out of stereo/mono audio?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Adobe Premiere Pro CS6, format for exporting video to web.

    On the Adobe Premiere Pro CS5.5 I used the format "H.264" and preset "Apple Ipad 400x224, 16x9, 29.97, 400kbps." That preset isn't available in the Adobe Premiere Pro CS6 edition. What would you recommend that would be comparable and good for exporting a one-hour video for use on the web (Vimeo, to be specific)?

    You're in the wrong forum.

  • Premiere cs4 trail version for MAC - no HDV options

    Hi, I've seen this same problem for PC, but not for Macs.  I've just installed a trial version of Premier onto my mac OS X (or what ever the most recent OS is)  that has never had a previous version on it. 
    When I make a new project, there is no HDV presets.  When I open an older project made on my PC, it opens but I can't import the files and get this error "unsupported format or damaged file".
    I origionaly thought the files were no usable in the Mac version of premiere because I captured them on the PC, but seeing that I can't even create a HDV project, I think the problem is the software.
    Any ideas of the fix on a mac?
    thanks, eli

    I apologize for not seeing that you are new here and that my tone was not welcoming. It has however been told over and over again and I overlooked that it was your first post here. Sorry. Nevertheless, my message I hope was clear, due to licensing issues, there is no MPEG support in the trial version. Your only option is to get the full version.

  • Cs4 extended looking for shortcuts video layers

    So,  let's say I have downloaded a  QT video, when I import the video (less  than 500 frames) and convert to  video to layers I would then take a  bunch of the layers and make them a  group. Okay, here's where I need  the help, I would like to take this  group convert them all to a group  of same color channels, after which I  would like to take the group all  to the same % gausian/lens blur. My  problem is doing them one at a time  is so time consuming. I would really  appreciate any shortcuts.
    Tks Gary
    ps I have mac but, this is not about photoshop vs pc situations it's totally photoshop

    Aahh the simplicity of it! I'll work on it this weekend.
    Ich bedanke mich!
    all the best
    Gary

  • Problems with Premiere CS4 video

    Just purchased Premiere CS4.  When I import video (avi or mpeg), what appears in the preview monitor or the timeline monitor is greatly distorted.  Audio is great, it's just the video that I'm having trouble with.  Running it on XP with 3.4 GB of memory.  Any advise would be greatly appreciated.

    So would some information. AVI and MPEG mean nothing, they are just containers that can hold anything from scrap metal, toxic chemicals, food, clothing, electronics, spare car parts, tapestry or God knows what. Unfortunately PR can only handle certain contents, so you need to know what codec is used.
    Look here and answer at least the 16 questions at the end of the Wiki article: Some suggestions

  • How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

    I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain.  Also the same problem with input coupling
    Does anyone know how to set the gain and input coupling for each individual channel?
    Thanks,
    Hector
    LabView 8.5 Windows XP

    Hey Hector,
    http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
    This has a few examples of how to do that.  Let me know if you have further questions.
    Have fun!
    -gaving

Maybe you are looking for