Premiere CS4 HD to SD

Windows 7 Ultimate
Premiere CS4
Video Card Nvidia9800GT
Footage: 1920x1080, 23.976fps (used a Canon 7D)
Ram 6GB
Gentlemen !
Before posting this thread, I went through some older threads regarding converting HD footage to SD I found few including the one from Jeff Bellune's
Link :
http://bellunevideo.com/tutlist.php
I followed his procedures and created my final AVI 720x420 NTSC
But I noticed the quality of the output video was not all that great compare to my original footage , which is a 1920x1080, 23.976fps (used a Canon 7D)
Then I went and selected the MPEG4 as format and the output video file looks great
But the Frame width is only 176 and the frame height is 144.
It would not be a problem if I burn it on DVD which I believe makes it 720x480 ?
Any exporting suggession for the bst quality, which finally goes on to a DVD.
Many Thanks !

If the final output is dvd dont make an avi but go straight to mpeg2-dvd.
Don't forget to set Render Maximum Quality on.
If i am correct Jeff also covers that.

Similar Messages

Media Encoder error about activation when exporting in activated version of Premiere CS4

I get the following error when I try to export media in Premiere CS4 (Note: I have a legal and activated copy of CS4 Master Collection). In Premiere, it appears to go through (the loading progress bar fills and then disappears) but when I check the folder, it's empty. And then I notice that there's another icon in my taskbar and oh hey, it says "AMT Subsystem Error: Thank you for using Adobe Media Encoder CS5. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continuing to use Media Encoder."
I'm using Windows 7 x64 (8gb of RAM). I tried installing the patch as suggested in this thread: http://forums.adobe.com/thread/719451 but it only claimed to not have the corresponding program installed. I tried checking to see if there were any updates - there weren't.
A quick check on my computer reveals that both Media Encoder CS4 and CS5 are installed. I looked to see if there was a way to uninstall the CS5 version but didn't see it. The only way I think I could have gotten it was though some sort of Adobe update.
Any ideas of how to fix this?

Hi: I have the same problem, but it happened very suddenly and after very specific updates. I successfully encoded a file using the CS6 encoder. Then, I allowed updates to Adobe Media Player and Adobe Air. I tried to encode with CS6 again and it had stopped working - all in the space of 5 minutes. A reboot did not help. I also have CS4 and CS 5.5 installed and have had all along (which means that you can have them and use the CS6 encoder). Since I can no longer use the CS6 encoder, but am able to launch an older one, I am using that for the moment. I hope that this reply will be of some help in finding a solution.

Adobe Premiere CS4 Projekte archivieren.

Hilfe- ich verzweifle: Ich arbeite mit Adobe Premiere CS4 (Windows). Grosse Probleme habe ich einzig beim Archivieren fertiger Projekte. Kann mir da jemand helfen? Ich lege meine Projekte so an, dass sämtliche Footage-Dateien (AVI,MFX.JPF,WAV,MP3, verbundene Aftereffects-Kompositionen etc.) im selben Stammverzeichnis (mit mehreren Unterverzeichnissen) sind. Wenn ich nun die Festplatte mit dem entsprechenden Projekt an einen anderen Computer anschliesse und das Premiere-Projekt wieder öffnen möchte, findet Premiere die Footage-Dateien nicht mehr. In stundenlanger Handarbeit muss ich die dann jede einzelne Footagedatei wieder zuordnen (Medien verbinden). Das kanns doch nicht sein!!! Was mache ich falsch? Wo zum Teufel speichert Premiere die Dateizuordnungen ab? Das Löschen der Common-Cachedateien führt übrigens auch nicht zum gewünschten Resultat. Mit der Funktion "Projektmanager" komme ich auch nicht weiter, da dann verbundene Aftereffects-Kompositionen und MXF-Filmdateien (von meiner EX1) NICHT archiviert werden, d.h. die fehlen dann im Projekt. Ich habe sämtliche möglichen Einstellungen durchprobiert. Es funzt nicht!!! Also-hier nochmals meine einfache Frage in Kurzform: Wie kann man komplexe Premiere-Projekte archivieren, um sie später auf einem anderen Computer (auf welchem die CS4 Suite installiert ist) wieder problemlos zu öffnen.

Christoph,
Glad to see your English is good, because it makes for a broader audience for your questions.
It is a make or break condition that drive letter and directory structure are absolutely identical on both systems.
Let us know if that helped.

How do I get Vio Pov.1 (helmetcam) footage to work with Premiere CS4?

Hi.
I'm having the same problems as this guy: http://www.adobeforums.com/webx/.59b78c2b/7 with video from the Vio Pov.1 not playing in premiere. Although his topic is already there I made a new topic to get some fresh hits and try to resolve this once and for all. Also because I make some reference to Canon Ixus video files.
I have run the codec-analyzer g-spot on one of the pov.1 video files and it states that I have the proper codec installed.
Codecs in video clip:
Video: XviD ISO MPEG-4 @ 3101kbps 720*480
Audio: 0x0050 MPEG-1 Layer 2 @ 32000Hz 64 kb/s , Monophonic
Still no luck playing/editing them in Premiere CS4. Audio plays fine, video shows but frame is only updated every 4-5 seconds and not the actual frame that corresponds to that point in the audio but actually the next frame from the first one. It continues like that.
Specs:
Running Vista 32 bit and Adobe Master Collection CS4
Quad-core 2,4GHz
4GB ram (i know, only about 3 to 3,5GB utilized in 32 bit OS.)
Nvidia 8800GT 512mb
74GB WD Raptor as system/adobe software drive.
500GB Samsung spinpoint throuch E-sata as project drive.
The wierd thing is this:
I have a separate system drive with windows xp installed, Adobe Master collection CS3 fully updated and NO other software. (same computer)
Differance between CS3 and CS4:
CS3,no codec pack:
- Canon ixus video files WORK
- Vio Pov.1 reported as audio only, not even thumbs showing FAIL
CS3, ffdshow codec pack installed(ffdshow-rev2180_20081004_xxl)
- Canon ixus: WORKS
- Vio Pov.1: WORKS
CS4 on vista, relatively fresh install, fully updated, no codes packs.
- Canon ixus: FAIL
- Vio Pov.1: FAIL (video)
CS4, same as above with ffdshow installed:
- Canon ixus: FAIL
- Vio Pov.1: FAIL (video)
CS4, same as above with morgan mjpeg codec installed:
- Canon ixus: WORKS (yay!)
- Vio Pov.1: FAIL (obviously as it's not mjpeg)
Someone with some insight into these things, please point me in the right direction. Does anyone have experience with managing video settings within the ffdshow interface? I'm not experienced enough to tweak all the settings.
The current project Im working on is a small web clip shot with a Panasonic HDC-SD100 and the Vio Pov.1. It's a short rally on ice clip I'm looking to produce the panasonic video files are NOT supportet in CS3 even with codec packs.
CS3=
panasonic: no!
vio-pov1: yes!
CS4:
Panasonic: yes!
Vio-pov1: no!
See my problem?
I added the Canon ixus comparison since I previously had problems with it but have now solved them. Also to show that Adobe seem to have cut support for certain formats when moving on to CS4. It has taken me a looong time figuring out how to get ixus working in premiere because I'm not used to this stuff.
The ideal solution is not having to convert clips before using them so I would like to focus on that avenue. After all it finally worked with the ixus clips so I have hopes that eventually a solution can be found for the Pov.1 clips which is also more widely spread and used in proper productions.
Im very sorry for the format of this post, and the length. I just had to get it out there to see if someone can help me.
/ Johannes

Thank you Stanley and Bill for your input.
Sorry for checking the topics progress so late.
Bill, could I ask what specific software you are using for this batch conversion task?
Like I stated in my first post I am able to edit the Pov.1 material when plugging in my secondary HD with Xp and CS3 on it. So I can fiddle about with that as well but if you could supply me with the name of your software it would save me all that time swapping harddrives back and fourth. There are so many out there, would like to eliminate risk of malware and such by using the software you have.
(reminder, cs3 does not do AVCHD, #1 of many reasons why I prefer cs4)
I'm still testing various xvid/mpeg4 settings with ffdshow and other codecs, I'm still determined to find a solution, for everyone. After all, it CAN run under CS3.
I have also submitted the case to Adobe. Hoping to hear from them soon. Anyone else care to throw some thoughts in?
Thanks again for the input so far,
Johannes

Can you help me with this Premiere CS4 error? (picture included)

Hello
I have Adobe Premiere CS4 and when I recently updated to 4.2.1 many of my videos now do not have playback in the source or edit windows. Some are black screens, and some are turquiose during playback. If I click on the edit window to select the video frame and move it within the edit window (say to the left side) it will play back with a turquoise overlay and show the video behind it enlarged. This ONLY happened when I did the update. I am running Windows 7 64bit. When it was at 4.0.0 everything ran just fine. The video I have been working on is a 1080p .MOV file. Has anyone else seen this? There is a picture of the problem below.
Thanks for any help!
James Poremba

Updates, whether with a program, or the OS from MS (or Apple), can cause all sorts of driver issues. These are most often seen with video and audio drivers. Just a simple OS hot-fix can render these obsolete instantly. Also, some recent nVidia drivers contained some "gamer-only" modules for things like 3D rendering and 3D stereovision for use with nVidia goggles. These seem to have been updated, so that these modules do not bring Adobe programs to their knees.
A couple of XP-Pro hot-fixes messed up my nVidia Quadro in PS. A simple driver update fixed those. I had gone more than 6 mos. with not one problem, and then installed the hot-fixes and BOOM!
Good luck,
Hunt

How can i open .mts files in premiere cs4?

Hi all,
I am using premiere cs4.
when i import .mts file in cs4 it says file format is not supported.
could any one please tell me how can i open .mts file in premiere cs4.
Thanks
Murali.

What kind of audio did the camera record? For example, the Sony NX5U can be set to record linear PCM audio, which will not import into CS4. If the same camera is set to record AC3 audio, then the clips should import and play as expected. This thread may help:
Adobe Community: AVCHD audio
Jeff

Camtasia Poor Quality in Premiere CS4 Export

I am a PC user. One of my clients uses Mac and Camtasia to screen capture his software program, which I need to integrate into a video I am making for his company. The MP4 Camptasia file he sends me looks good. I bring the file into Premiere to edit it, but when I export it, the clip done with Camtasia has very poor quality, while the footage I shot with my video camera looks great.
Specs:
Camera: HMC40, PH mode 1080/60i (MPEG-4 AVC/H.264 compression).
PC: i7 quad-core 64-bit running Windows 7 Professional 64-bit, 8 GB RAM.
Editor: Premiere CS4 in the Adobe CS4 Master Collection .
New Sequence setup in Premiere: AVCHD > 1080i > AVCHD 1080i30 (60i) Anamorphic.
Premiere’s export settings:
Format: MPEG2
Preset: HDTV 1080p 29.97 High Quality
Multiplexer tab > Bitrate and Buffering Details: Variable
Video Tab > Basic Video Settings > Quality: 5
Field Order > None (progressive)
Profile > Main
Bitrate Settings: Bitrate Encoding: VBR 2Pass
Minimum Bitrate: 4 (default)
Target Bitrate: 15 (default)
Maximum Bitrate: 18.5 (default)
GOP Settings > M Frames: 3 (default)
N Frames: 15 (default)
Output summary: NTSC, 1920X1080, 29.97 drop frame (fps), Progressive, Quality 5.0
Note in general: I found that if I set the Bitrate Encoding at VBR 1Pass, I got glitches sporadically.Using VBR 2Pass has solved this.
My question about the Camtasia clip:
1) How can I get the Camtasia footage to be as sharp in the export as in the original?
Other questions in general:
2) Are my New Sequence setting in Premiere correct? AVCHD > 1080i > AVCHD 1080i30 (60i) Anamorphic
3) Is my choice to export as MPEG2, HDTV 1080p 29.97 High Quality preset, the best for the footage I shoot?
4) Is my choice to set the Multiplexer tab > Bitrate and Buffering Details at ‘Variable’ the best?
5) Do my Bitrate and GOP settings need adjustment?
6) Should my Export field order be Upper instead of Progressive?

function(){return A.apply(null,[this].concat($A(arguments)))}
The frame rate is 1038 X 882
That is a very odd frame size, and one that probably won't work well no matter what workflow you use. You asked:
function(){return A.apply(null,[this].concat($A(arguments)))}
how could he better capture and export to match my workflow?
Have him capture and export to match your desired export frame size for the finished project.
function(){return A.apply(null,[this].concat($A(arguments)))}
How would you suggest I change my workflow to handle the interlaced and progressive issue?
I can't answer that until I know exactly how you intend to deliver your finished video. Any answers to your other questions will also likely depend on your intended delivery format and media.
-Jeff

Premiere CS4 Does Not Correctly Export Quicktime

Hello,
When CS4 initially came out, all of the Quicktime exports were messed up. Now after several patches it still seems that it is not completely correct. I have rendered out of a 3d app sequential images with a white background and an alpha channel. When I import these into Premiere, when the alpha channel is disabled for the clip, it correctly shows a white background in the monitor. But when I export this clip to Quicktime Animation and turn on 32 bit depth, it creates the clip with an alpha channel, but when the alpha channel is disabled on the clip, it renders the background still as black, but with no alpha. It should render it as white. Quicktime Animation clips created this way with other Quicktime exporting software does not do this, and so I believe this is a bug. Where can this be logged?
thx

It's not a problem with Quicktime, but rather Premiere CS4 because other apps can create the same thing correctly, using the Quicktime Animation codec.
thx

Slow down issue with Premiere CS4 on a Mac pro

I am having a similar slow down issue with Premiere CS4 on a Mac pro, but I don't have bloated prproj file size.
Here is what I am working with:
Mac Pro intel quad core 2.8ghz
OSX 10.6.7 Snow Leopard
6Gigs RAM
3TB storage between 4 drives, each drive with about 50% free space
I am editing a 10 minute HD video from avchd files. The edited video is very heavy in photoshop files with a variety of different fx including green screen. The system has slowed down to almost a standstill. Anytime I move the playcurser, or try to do any action, it displays the spinning top "thinking" icon and takes 15 seconds to several minutes to unfreeze. I am often forced to force quit and I have gotten unexpected quits several times. The program also freezes on startup frequently.
No other programs are running. When I export with media encoder, it took about 4 hours to complete. The last 4 or so photoshop images I added seemed to tip the program over the edge. It had been slowing down some, but those last few really dropped the processing speed. Before those additions, export took 30 min to 1hr.
I did delete the render files (did not check if the file size was bloated beforehand, oops) but it has not significantly affected my performance.

Do you need all of those extra pixels in the stills? Are you panning the full 4976?
Two things to consider are that if you using, say a 1920 x 1080 Sequence Frame Size, you can only see that at any time, regardless of how large the images are in pixels. If there are extra pixels, i.e. the Pan is not using all 4976 pxls., I would Scale to just what you need in PS, prior to Import.
If you are doing any Scale in PrPro, its Scaling algorithms are not as efficient, as those in PS. [Note: CS5 and 5.5 are a major improvement on that statement.]
With many large stills (the max for CS4 is 4096 x 4096, if there ARE extra pixels, pushing those around will use up resources, and quickly. As a test, some years back, I was working on a "photo wall," and was using 4000 x 4000 images. The workstation had no issues with slowness, until I got to the 5th large still. By the 8th, the Project was too slow to edit. I had to wait for everything. Luckily, I have AE, and it handles large stills much more efficiently, and much differently, than PrPro. I just moved to an AE Comp, and completed the Project, finishing up n PrPro, after I Exported from AE.
Just something to think about. With Scaling in PrPro, this is one time, where bigger is not necessarily better.
Good luck,
Hunt

Can't open Premiere CS4 project in CS5

Having issues opening a premiere cs4 project in cs5. The machine I was using with Cs4 has died, so I'm trying to continue the project with CS5.
Whenever I open the project I get a message saying "this project contained a sequence that could not be opened, No sequence preview preset or file or codec could be associated with this sequence type."
I have the latest version of premiere cs5 installed, and quicktime. The footage I was using was from a Canon 7D.
Thank you!
Patrick

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en

Premiere CS4 to Encore CS4 Export Quality Problems

I recently purchased a non-linear editing machine with an RTX2 Matrox Card and CS4 Professional. After six or seven projects, I finally noticed that all my imported .avi files exported through Adobe Media Encoder and burned through Encore CS4 are not as crisp, sharp, or look like the original high quality SD footage after the DVD is burned like it always used to look in CS2. ( jumped from CS2 to CS4)
These DVDs were of plays, football, and basketball games. It seems that when the camera shoots a close up, the video looks fine but after you shoot from a distance, there is a considerable difference in the footage. ( alomost blurry) I just caught this and nobody has complained but I watched one of my older DVDs I produced with CS2 and it had no quality loss whatsoever. There is a night and day difference
For the sequences, I am using Matrox SD, NTSC, Standard, 720 x 486 and capturing with firewire through the Matrox card. The raw footage is beautiful. The Video Preview Option is NTSC Standard and the Codec is NTSC Matrox DV/DV Cam.
I can playback a timeline from the Matrox card and burn directly to a DVD burner and the footage is perfect, but when I export, I have chosen Microsoft .avi file, Matrox DV/DV Cam/ MPEG2, and MPEG2DVD.
I have even changed the sequences codec to Matrox MPEG-2 I-Frame and tried exporting using that out of Adobe Media Encoder and am getting the same results.
None of my customers have complained yet, but I definitely do not want to continue producing almost blurry DVDs.
I am using Adobe Premiere CS4 Version 4.1.0 and Encore CS4 Version 4.0.1.048 and Matrox Version 4.1.0.23
Can this problem be related to and eliminated by updating my CS4 Production Suite and my Matrox Software.
I was wondering if anyone had experienced this same issue and what solution they came up with or if anyone knew if the updates would correct this important issue. I just filmed a lengthy play that I have to author through Encore CS4 and I cannot release any more of my productions until this problem is solved. This is a big dollar production and I need some assistance on this matter as soon as possible. Thanks Jimi White

Thanks for taking the time to help me out. I just purchased my non-linear with CS4 Production Suite and the Matrox RTX2. I have several projects that I am working on right now and I was advised by Adobe, Matrox, and my non-linear vendor, 1 Beyond, to finish those projects before performing updates.
I also found out that If I export using the MPEG2 8Mbps, it cleared up the video dramatically. We had to go through a number of export presets in order to find out what worked best in Encore. I am going to try to finish the project now and will advise on the results.
This is a basketball highlight DVD and that's when I noticed the problem. My other productions were photos to music, and non sporting events and I didn't notice any problems with those DVDs ( they actually looked decent. Worst part about it was, I finished the project once and burned 18 DVDs, and then reviewed one of them and found the problem. I have to start over and just eat the DVDs printed and all.
Thanks again, it was nice of you to get back to me.
Jimi

Premiere Cs4 handle CPU...performance...and idiot questions

Ok, i tried to read as much as i could, performance threads about Premiere Cs4...but couldn't help it.
So i upgraded to Production Premium Cs4 before 2 weeks...
I've noticed all the problems that were mentioned...what i can't understand is the LOW PERFOMANCE in export or preview
my system runs a QUAD 6600 with 8gbs RAM, NVIDIA 8800GT and XP64...
after effects runs fine in almost maximum CPU (if you adjust it in preferences), but premiere (that means and ABOBE MEDIA encoder) exports in 5-20% of the CPU...if you try to encode with TMPGEnc processes go much faster and cpu is quite high...
question 1) (yes i know i am dumb...)
exporting speed has to do with footage, type of media that is being exporting and GPU??????
2)is my system, just not enough???
3)Premiere CS4 cannot handle multicore anyway...and every user here has the same problems??????
Sometimes...i think that i will do BAD things in my PC when PREMIERE is SO SLOW and i am in such hurry...Someone...coould answer? before i start taking drugs????????????????
A Straight answer 1) ,2) ,3) would be really nice for my emotional condition...

Roger thank you very much!
It is now starting to make sense. I have only run it once and not tried any other tricks yet (like trying to use the Source from the RAID array rather than from the C: drive)
Now rather than taking 130 seconds for encoding it is down to 25 seconds versus 8 seconds for CS3. I suspect that at least some of that is because they are using the C: drive for the source.
MPEG encoding has also a major improvement by using the rendered preview files and as matter of fact it reduced the MPEG encoding time from 75 seconds (CS3) to 57 seconds (CS4)! Maybe we will have to go back to suggesting rendering the timeline before any encoding.
One other plus for CS4 is that the rendering is much smarter in that any duplicate segments are rendered only one time.
Why do they hide these menus with such tiny hard to find icons? I had a similar problem finding a playback option for my second monitor.

Premiere CS4 Audio Effects Only Work On Latter Half Of Each Audio Clip

I'm currently working with Premiere CS4 on a Windows 7 PC and running into some audio issues when exporting the video. In the timeline when I playback the preview the audio sounds fine but when I export it the audio effects I applied in Premiere only work half the time. Each audio clip will play in it's raw form for a few seconds and then halfway through playing the Premiere audio effects will turn on. I have two audio tracks in my timeline, one for music and the other for narration. There are 10 video tracks in total for various masks, overlays, title, etc.
The sequence has 18 audio clips in total and each one has a separate EQ, Highpass, Volume, and Denoiser effect on it (most are similar but are fine tuned for each clip). So far I've tried exporting as an AVI, MP4, and WMV but each has the same issue. I've also tried exporting with and without the "Use Preview Files" option on the Adobe Media Encoder to no avail.
Has anyone else ever encountered this type of issue before or have any ideas on how to fix it?

Posting for anyone else who comes across this issue:
I was able to fix this by taking all of my audio clips and nesting them in a new sequence, which was then moved to the main sequence. I kept all the effects on their individual clips.

Premiere CS4 exporting to MPEG2, changes timeline??

I've been using Premiere CS4 to edit my videos. Once the video is complete I do a file > export > media to use Media Encoder to save the media in various formats, one of them being MPEG2. In the timeline for each video I have 3 seconds of black at the start and 10 seconds at the end. I just noticed today that when I export to MPEG2, the created MPG file has the black trimmed off both ends, and it apparently stretches the video to fill the full time length somehow. So if my show should fade to black at 28:00 normally (as it does on the timeline), with 10 seconds of black until 28:10, when I view the created MPG file the video start immediately instad of waiting 3 seconds, and it will fade out the video at 28:10 and not have my 10 seconds of trailing black. So it must be stretching the whole video to fill in that extra 10 seconds. It only does this with exporting to an MPEG2 file, the AVI and WMV files I export into using the same timeline are fine.
I had never noticed this before on the 20+ shows I've previously exported, I never even thought about going back and checking out the actual end time for the MPG versions because it was fine on other formats. Apparently this is something not isolated to this computer I'm using because I went back to my old laptop and did an export the same way on an old video and it did the same thing. I'm stumped.
Any help on how to be able to export to an MPEG2 file exactly what I have on the timeline like the other formats do would be appreciated.
Thanks.

Hi Ann,
The sequence length is the same in Premiere as it is when I play it in media player. They both clock in at 28:10, but the exported mpg plays differently somehow. When I play it on the sequence my show fades to black at exactly 28:00, and then I have 10 seconds of black, that’s how I want it to be. When I play the exported mpg file in media player it doesn’t fade out the show until 28:10, and there’s no 10 seconds of black at the end, it just ends after the fade out. The software appears to be stretching the video to make 28:00 of video fit into a 28:10 length file, but since 10 seconds over 28 minutes isn’t that much it’s not noticeable when I watch it.
I just tried what you said to do… I took the exported MPG and pulled it back into Premiere and played it on the timeline, and it is playing it properly in there with the 10 sec of black at the end and timing it correctly. I don’t get it! It only shows up correct in Premiere, I’ve tried in both WMP and Real player and they’re doing the same thing. But my avi and wmv version exports all play properly in WMP. Very strange!
Thanks for your help.
Chris

Premiere CS4 Media Encoder AVIs and Encore Encoding Errors

For some reason, I'm having trouble creating DVD's in Encore from AVI's exported from Premiere CS4. When encoding starts, Encore immediately pops up with an "encoding error". I now, all of a sudden get this identical error on two of our systems.
Most of the time Encore works if I export an "MP2" file from the Premiere CS4 timeline.
Any of you guys having trouble with Encore CS4? To me it has been a lot more buggy and unreliable than any previous version. The program also seems sluggish on our Q6600 4gGB RAM computers! Kind of like the program is straining just to open its windows.
Another thing that is annoying. Earlier in the day, I exported a Flash Web video for a client's review. A few hours later I had to make a 1 hour and 46 minute DVD with chapters for a client that had to be Fed Ex'd overnight. It took forever to complete and I soon realized that Encore defaulted back to the last export...FLASH! cr@p. I would prefer that the program defaulted to standard DVD creation. After all it is Encore DVD.

I'm having major problems with Media Encoder CS4.
When I try to create an AVI file (for example) from a section of my Premiere Pro CS4 timeline, the encoder opens, takes forever to load the project, and then, after I hit start queue button, it again takes forever to load the project in the small window at the bottom of the display.
Finally the "waiting" message in the queue list turns to an orange exclamation mark with the message that encoder "could not read from the source. PLease check if it has been moved or deleted." Which of course it has not been. THis happens even if I preview the section in advance in Premiere. material.
If at any point I hit the settings button it simply reloads the project

Clip notes with reader 9 and premiere cs4

After upgrading reader to version 9 clip notes no longer works from Premiere CS3. It does work with premiere CS4 but a modification to reader by the reviewer is required to view the clip notes. Otherwise the video play/rewind etc buttons will be missing. This modification is detailed here www.alserver.co.uk/clipnotesreadme.pdf.
I have discovered this after many hours of trial and error and have posted the workaround here for anyone else with the same problem. Adobe support have been as much use as a chocolate tea pot! why do they ruin such great feature of premiere.
If anyone knows of a better workaround then please advise.

...real-time playback works fine in other high-load editing programs, as in the 2-series version of Avid Media Composer (which, by the way, played back just fine on my GeForce card and CPU/RAM configuration.) I wanted to go to Premiere because of my other CS programs. That said, I'd like to take a different approach other than simply throwing money and horsepower at a problem that might simply be a configuration issue.
Thanks!
Alan Staats

Premiere CS4 HD to SD

Similar Messages

Maybe you are looking for