Premiere CS4: How to Set/Disable Snap Area?

I'd like to shorten one of my clips only a few frames. But if I use the Delete and Fill Gaps tool (my translation from German version) I can only shorten my clip for a minimum of, say, 20 frames because there seems some kind of snapping functionality enabled.
This snapping mechanism clings my selection to the clip's current end until I've left a certain area around that clip's end.
How can I set the width of this snapping area? Can I disable it temporarily, e.g. by pressing something like a <SHIFT> key?
Your help is appreciated.

Thanks, Jeff!
Do you perhaps know where I can find a menu item on this? I guess I might forget this shortcut after a while. But my motor memory will better remember menu items.
Is there also a way to just temporarily disable snapping? When I'm already dragging I wouldn't want to release the mouse when I'm already at the destination position.

Similar Messages

[Q]How to setting Disable-Enable Virtualization on MSI NB GE620

[Q]How to setting Disable-Enable Virtualization on MSI NB GE620 AMI BIOS Version E16G5IMS V.10A
I test from securable program, Display this below.
But I used insatall MAC OSX in VMWare Workstation or Virtual Box , I can't install it. Display message popup for enable VT on BIOS.
I'm try to looking in BIOS . I can't find it for setting enable or disable. Because I has ever see other products can changeable. Please answer this question. Because it important for me. Thank you for the future.

I do not work for MSI and this is private service, if you look for official stuffs go to: http://msi.com
Quote from: iti11 on 28-April-11, 23:40:06
You can send this answer for me in email or not?
i will make a custom bios for you and will email to you,
to able to turn on and off the requested feature

Premiere CS4 - How can you import QuickTime (.mov) videos and which settings for the sequence?

Premiere CS4
How can you import QuickTime (.mov) videos and which settings for the sequence?
Please reply in plain English or if possible in German
Greetings from Vienna, Peter

I have not installed Quicktime.
I got a few scenes (.mov) from a Canon Eos 70d.
I want to create a short film (in Premiere CS4) with these scenes, mixed with photos and MP3 music.

Premiere CS4 export Mpeg2 setting

i use Premiere CS4 and i am a leisure user.
1. when i export mpeg2, the video is 800m file sze
    if i export to DVD, the files (video + audio) are 240m
   as i know DVD is mpeg2, what's wrong with the setting on huge file size difference?
   i need a small size mpeg2 file.
2. can i edit vob directly? it is very time-consuming to convert vob to avi and then edit.
3. when i used premiere pro before, it has function to export DVD directly at premiere.
    but now CS4 need to revert to Encore. Any fast track?
4. i alway have corrupted cache when importing avi files. i need to remove cache and import again until it is ok
   any way i can do it better or less error.
5. any fast method to simply cut the movie, not do any change of resolution, codec....
Thanks a lot in advance. i have lots of question.
Tony

Unfortunately, you've posted to the Premiere, and not the Premiere Pro forum. This is for a program that predates the "Pro" designation. Maybe the MOD's will move this for you, so you'll get more traffic.
Now, let's see if I can address some of your questions:
As for the MPEG-2, it is most likely that the larger file has a much higher bit-rate. What are the settings between your Exported MPEG-2 and those in the Transcoded file? That is the common difference.
As for editing .VOB's, if they are 100% DVD-compliant (very important), then CS4.1 can Import and edit. These still have the MPEG-2 compression, but should work fine. If those .VOB's were created by Encore, then changes are almost 100% certain, that you can edit them. If not, then the odds go down, and quickly. See this ARTICLE on .VOB's.
Export to DVD directly, went away with CS3. The included Encore is much, much better, and is the way to go. There is also a forum for it.
I've never had a corrupted cache, and cannot help here.
If you have DV-AVI Type II material as source, you can edit until the cows come home, and Export to DV-AVI Type II with no noticable degredation. Other formats/COCE's not so much. Here, it just depends.
Good luck,
Hunt

How can we disable info area when we're opening query ??

Dear All,
It's regarding authorization in query designer.
I've already created roles .. So if user's opening the query, they can see their authorized query in roles group.
But ..
When they're opening the query, they also can search the query by info-area. When they search the query by info-area, they can see all query.
My question is:
1. How can we disable the feature to seek the report by info-area ??
2. Do you know what the authorization is for maintaining part ??
Regards,
Niel.

Hi Niel
You can try the S_RS_FOLD authorization object.
Definition
With this authorization object, you can deactivate the general view of the 'InfoArea' folder. Then only the favorites and roles appear in the BEx open dialog for queries. The view of the InfoAreas is hidden.
Defined fields
The object contains a field:
SUP_FOLDER: Hide the file view if the field is set to 'True' ('X'). If both 'True' and 'False' is selected ('All Values'), the value 'False' is valid, meaning that the 'InfoAreas' file is not hidden.
Hope this helps.
Regards
Gaurav
Edited by: Gaurav on Oct 13, 2008 6:01 AM

How to set disable screen-capture-recorder when us...

i did a skype call w/someone some months back; i don't have a webcam, but the person saw that i was on their fb page and it totally threw me off, it felt like i was stalkign that person the way he came at me with it. some how screen sharing was on and it was showing my desktop which showed that i had fb open to this person's page. I felt so violated, i did not want this nor did i set it up. AT the time i had windows 7, now i have 8.1 and have forgotten how i was able to turn it off, anyone know of how i can disable this in 8.1??

Hi,
The ME2xN transactions reads the user settings from table ESDUS using function module ES_READ_USER_SETTINGS, and save them at the end of the transaction using function module ES_APPEND_USER_SETTINGS.
You need to overwrite the displayed header tab number using ES_APPEND_USER_SETTINGS just at the beginning of the transaction. I think that a godd point to do this is in the subroutine INIT_TRANSACTION of report RM_MEPO_GUI. You can do this using the enhacement framework. I have tested it and it works for me. This is the code you should insert:
FORM init_transaction CHANGING ch_document        TYPE mepo_document
                               ch_exit            TYPE mmpur_bool
                               ch_requisitions    TYPE mereq_t_eban_mem
                               ch_requisition_acc TYPE mereq_t_ebkn.
"""""""""""""""""""""""""""""$"$\SE:(1 ) Forma INIT_TRANSACTION, Inicio                                                                                D
*$*$-Start: (1 )-----------------------------$*$*
ENHANCEMENT 1 ZTEST.    "active version
*Expand header------
    CALL FUNCTION 'ES_APPEND_USER_SETTINGS'
      EXPORTING
        iaction = 'PurchaseOrder'
        ielement = 'DYN_4000-BUTTON     TOGGLE_STATE'
        iactive = '2'.
*Move to 2nd tab ----
    CALL FUNCTION 'ES_APPEND_USER_SETTINGS'
      EXPORTING
        iaction = 'PurchaseOrder'
        ielement = 'HEADER-TABSTRIP     SUBVIEW_INDEX'
        iactive = '2'.
ENDENHANCEMENT.
*$*$-End:   (1 )-----------------------------$*$*
DATA: l_ebeln TYPE ekko-ebeln,
        l_ebelp TYPE ekpo-ebelp,

How to set a print area in Numbers

This one should be easy: set print range for the cells that require to be printed. There does not to be a way to do it, or is it so obvious that I missed it?

Okay, I've been following this conversation, can't keep my mouth shut.
For what it's worth, I spend about 90% of my work day in excel and while I'm no power user by any means, I'm reasonably competent in it. I think in spreadsheets. It's a curse. I've used every spreadsheet there is that will run on a Mac, and none has even come close to excel's usefulness. Yes, that includes all the third-party attempts that claim to be business-ready. They're just not, and neither is Numbers.
Crazierthanu, I think excel can at least manage all of the issues you listed. For global settings you can select all the tabs you want to change and any change you make on one will be made on all of the selected tabs. So if you set Portrait and Fit to Page in page setup, all the tabs will print in Portrait and the data fitted to a single sheet. The downside to this is when there are different "sizes" of data on the various tabs; that can result in varying font sizes, another problem. Again in excel (I choose not to capitalize microsoft product names, call it a personal quirk born of extreme disgust with the company), in print view one can, with a few keyboard shortcuts, select the area to be printed and set print area from the context menu. It's very straightforward. And you can select any part of the data to print, eschewing all else. This is how you'd print non-rectangular areas. You can use this function to print discontinuous areas also, though they'll print on separate pages. To print multiple tabs at one time, select each tab you wish to print while holding down Ctnl or Shift.
Anyway. I sure don't want to sound like an excel supporter because I've put myself through a lot of suffering to avoid having to buy it. And I still haven't. I'll go a long way to keep M$ from getting any of my money. But excel is a good spreadsheet, the best there is so far. Printing should be simple. Maybe M$ patented excel's printing paradigm and no one else can use any of it. That would be par.
Many of these items are possible in Numbers. What's so frustrating is the screwy slider that makes you print the whole sheet and everything on it. I don't want to print everything on a sheet, and I want to easily select paper orientation (I think someone mentioned how to do that and I'd bet it would work globally by selecting multiple sheets in the left column).
I too think Nick hit it on the head when he said that you have to compromise sheet layout to fit within Numbers' print paradigm. That's just ridiculous. The application needs to bend to my will just a bit more than that.
Because I've invested a great deal of hope and what to me is not an insignificant amount of money, I'll learn to use Numbers. But Apple sure missed the boat with this one if they hoped to get excel users to switch. Unless they have a serious personal vendetta against microsoft, pretty much any spreadsheet user in the world will scoff at this first generation attempt and continue using excel. You can sure make "pretty" spreadsheets with Numbers, but it's awful hard to get any work out of it.
I've printed the Numbers manual and maybe I'll learn what I need to know from reading it. Heaven knows I've read enough excel books! Maybe that's what the first version of Numbers needs - someone to figure out how to use it and write a book for the rest of us. Hey, maybe that can be my retirement fund!

How to set a viewable area with scrollbar?

Hi,
I am using a VI front panel to display an image. The VI loads an image dynamically and shows it in a picture control. The width of the panel and the picture control are set identically to match the image width, and a vertical scroll bar takes care of the difference in height.
My question is, how can I make the user unable to scroll beyond the image area? For example, I place the picture control at the top-left of the panel, then when I run the VI it shows the image correctly so that you can see the upper part of the image in the window, but you can also scroll up or down all the way to see a gray area that is not occupied by any controls. Is there any way to show just the area I want, even if the user scrolls all the way? Thank you.
Message Edited by ondal on 08-12-2008 11:02 AM

The easiest way to do this is to remove the scroll bars.
If you want access to other controls as well, you should create a seperate pane for the picture control and hide the scroll bars on that single pane.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to set Disabled Text field's Background color

We have an Applet application which we are running with Java Plug-in 1.5.0_11. We have Grey back ground for all the pages. When the text fields are in editable mode the text color is in black. When they are in non editable mode the text color changes to opaque green (with grey background page color) which is hard to read.
The same application with Java Plug-in 1.4.2_13 did not had this color problem. When text fields were disabled they appeared as dark grey which was easy to read.
We are using
import javax.swing.JTextField;
Is it a bug in newer Java Plug-in? Is there a work around for this?
Thanks for any help and suggestions

Solved this myself by writing a programmatic skin and set it to LinkButton's disabledSkin.

Broadcast safe blacks and whites - Premiere CS4 - How to get?

Hi. I recently had a fellow editor over and he saw some of my footage and mentioned that my whites were too bright and to make sure that they were broadcast safe before exporting them. He didn't know how to do it in Premiere as he uses Final Cut. He said that Final Cut does it automatically. Does Premiere Pro do it Automatically?
After mentionng it to me, I did notice that my whites were quite bright. Below are some examples.
These are two frames taken from the timeline of a sequnce which had already been exported as an AVI.
Here is some information about the system I use:
Once I found out how to do it, is there a way I could quickly apply this to a whole sequence of clips? Do i need to play around with it for each individual clip?

yes, the tv and computer monitor will look different...probably why you thought the whites were OK when editing on computer.
I use CS3 so your version may be slightly different ....
im gonna put up some images to illustrate...
you can use broadcast colors (effect )...drag onto clip ...and see if that works OK for you ...
export a small sample of product ( shrink work area to do small sample ), burn dvd and look on TV...only way to see if its working...can use dvd RW if you want and your dvd player can play dvd rw.
if broadcast colors doesnt work well for you, you can also use the OUTPUT on levels...which is normally 0 and 255...black and white...
after you click "OK" on the levels menu you see in sample is when you see change in program monitor...( in my version cs3 )..you wont see change until you click OK, except for in the little tiny window of the levels box....
I personally use the levels adjustment (output only ) more often than the broadcast safe colors for WHITES...

Premiere CS4 - how to duplicate left audio channel to right

I am editing old footage in which the audio signal is on the left channel only - the right channel is empty. I want to duplicate the left channel on the right so the sound comes out of both speakers. In Premiere 2.0 this was easy: right-click on a clip, choose audio options, then 'Duplicate left', and that was it. I can't figure out how to do the same thing in CS4.

FAQ:How do I create mono/stereo out of stereo/mono audio?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

How to set disabled foreground color of JCheckBox?

How do I set the disabled foreground color of JCheckBox? To clarify, I want to choose the color that is used to paint the component's foreground when it is disabled.
thanks.

Check out this thread:
http://forum.java.sun.com/thread.jsp?forum=57&thread=122112

How do you disable snap to grid?

This featured was listed as being added with the update to version 1.4, but I cannot find how to turn it off. I have looked all through the app, and the separate Settings app, but I haven't been able to find the option anywhere or any updated documentation that describes where the option is. Does anyone know where it is; maybe I am overlooking something obvious. Thanks.

This is the label that will be displayed in the TImeline once you are zoomed in all the way to indicate the new snap status. BTW affects also the manually moving of the Playhead.
This is the article on Apple's website that explains the details
http://support.apple.com/kb/HT5670?viewlocale=en_US&locale=en_US
To turn off "Snap to Grid," pinch-zoom to the maximum level in Tracks view or when editing notes in regions. Pinch-zoom again and "Snap to Grid off" will appear on top of the Tracks area.To turn "Snap to Grid" back on, pinch-zoom out.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

CS4: How to set up landscape orientation doc with dual page setup vertical not horizontal

I'm an InDesign newbie and am trying to set up document presets for a landscape-oriented document that will have binding at the top and bottom edges of the page, not the default left and right edges. So when I open up my spread of pages 2 and 3 I want to see page 2 ABOVE page 3 not to the left of it.
I can't see any way to do this. Am I missing something or is this just not possible in InDesign CS4 (v6.0.6)?

The closest you can come out of the box is to set up a facing pages document using portrait orientation, then select the spreads in the Pages panel and Rotate Spread View 90 degrees Counter-Clockwise before you begin the layout.
This will allow you to work "as if" your pages were landscape and bound on the long edges, but things like x and y coordinates will be swapped bcause you are really still working on rotated pages.

Struts: How to set 'disabled' attribute name using a property in ActionForm

I have the following struts tag:
<nested:select property="someProperty" disabled="<nested:write property="screenReadOnly"/>">
<html:options .../>
</nested:select>
where 'screenReadOnly' is a boolean variable in the ActionForm.
However this does not work. Is there a way to use this technique in a struts way (without using any scriplets) for attribute names instead of having duplicate struts tags where the only difference is, in this case, the disabled value?
For those that are interested, I get the following thrown exception:
weblogic.servlet.jsp.JspException: (line 120): Non-matching extension tags //[ null;
Line: 120]
at weblogic.servlet.jsp.JspLexer.jspException(JspLexer.java:856)
at weblogic.servlet.jsp.JspLexer.mCLOSE_EXTENSION_TAG(JspLexer.java:2674)
at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:1987)
at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1860)
at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java:1100)
at weblogic.servlet.jsp.JspParser.doit(JspParser.java:89)
at weblogic.servlet.jsp.JspParser.parse(JspParser.java:192)
at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:119)
at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:255)
Cheers.
Normie.

Rule of thumb: You can't use tags for attribute values.

Premiere CS4: How to Set/Disable Snap Area?

Similar Messages

Maybe you are looking for