Premiere CS5.01 stops playback..why??

Hello,
I looked into search forums first but couldnt find my problem solved unfortunately:
I edit 5D material on Premiere  CS5.01 .
Quadcore 64bit Win 7 Ultimate 8GB RAM, extra 2x 2TB HDDs, Blackmagic Decklink 3D Extreme
I could edit and playback, but what keeps happening more and more is:
I play the timeline and it just stops when at the cut from one clip to another.
If I hit play again it goes again for a clip or two or three then it stops again at the cut of a clip
( in fact if I go back in the timeline it seems to keep the playback until a not played clip, then it stops again...)
I checked the audio But i cannot change ASIO if Blackmagic Audio is set standard.
I tried "Premiere Pro WDM sound"  instead as a standard and checked 32bit on in- and output, but that didnt do anything...
This is really frustrating. Any ideas?
Thanks!!
Christian

Hi,
I'm having a similar issue with my Blackmagic Decklink card in PPro CS5. I have checked the "Turn Off Dropped Frame Warning" and the video does play continously, but now lags behind/plays slowly compared to the audio, did you ever have this problem? also did you get an answer with regards to being able to change the resolution?
Cheers
Dave

Similar Messages

  • Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

    PROBLEM: Premiere CS5 - Project Monitor playback is jerky
    This had NOT been an issue prior to reinstalling the operating system and all software.  I have read numerous articles on the forums and have tried everything I can find...with no results.
    STEPS TAKEN TO RESOLVE THE PROBLEM:
    I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
    I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
    I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
    I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
    I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
    I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back. 
    Since I have 96 GB of RAM, I don't use a pagefile.  A zero MB page file is the same setting I had prior to rebuilding the C:  Regardless of whether I have a pagefile or not, the problem persists.
    I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project  - the problem persists.
    Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up.  I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me.  Keep in mind that the System drive is a solid state drive.  Anyhow, I had no choice but to dive in and reinstall everything.  I wiped the system partition of the SSD using quick format and started installing the operating system.  Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr.  Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
    SYSTEM CONFIGURATION:
    The Operating system and all software is installed on C:
    All data files and most profile related folders are stored on D:
    C:\ (one Intel Solid State Drive - SYSTEM DRIVE)  Used Space: 57.5 GB  Free Space: 388 GB
    D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
    Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
    Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
    System Manufacturer    Intel Corporation
    System Model    S5520SC
    System Type    x64-based PC
    Video    NVIDIA Quadro FX 4800 driver v.320.78
    Display        Dell 27" LCD (DisplayPort)
    Display        Dell 27" LCD (DisplayPort)
    Processor    Intel(R) Xeon(R) CPU           X5680  @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
    Processor    Intel(R) Xeon(R) CPU           X5680  @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
    Installed Physical Memory (RAM)    96.0 GB
    Page File Space    0 bytes
    PREMIERE PRO CS5 SETTINGS:
    Monitor PLAYBACK RESOLUTION: Full
    Monitor PAUSE RESOLUTION: Full
    (regardless of this setting, the problem persists)
    PREFERENCES:
    MEMORY:
    Installed RAM: 95.9 GB
    RAM reserved for other applications: 10 GB
    Optimize rendering for: Performance
    (Changing this setting to 'memory' does not resolve the problem)
    MEDIA:
    Media Cache Files
    X - Save Media Cached files next to originals when possible
    LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
    (User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab.  This is the same configureation I had prior to rebuilding the C:\drive.  Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
    Media Cache Database
    LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
    PROJECT SETTINGS:
    Scratch Disks
    Path: D:\Users...\My Documents\
    General
    Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
    (Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
    If any of y'all have any other suggestions, I'm all ears.
    Thank you.

    I'VE RESOLVED THE PROBLEM!
    PREFACE:
    OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too). 
    If you've read my post above, you've seen all the steps I've taken to resolve the problem.  I've read many posts, some of which have mentioned  hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem.  I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe.  Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle). 
    In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM.  bla bla bla, puke...whatever.  Bottom line is this:
    It's not a software issue.  It's not and Adobe issue; and Gawd no!  It's NOT a PC vs. Mac issue!  HA HA.  The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
    SOLUTION FOR ME:
    Download and install the updated drivers for the motherboard.  Mine is an Intel Workstation Board S5520SC.  Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating.  A very handy, time-saving tool!!!  Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
    The scan revealed two Intel drivers needing an update:
    Intel Chipset
    Wired Networking
    and one non-intel driver:
    Creative Labs Sound Blaster X-fi
    I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
    If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard. 
    ROOT CAUSE:
    While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
    Peace

  • Playback in CS5.5 stops after a fraction of a second-why?

    Just tried using Premiere CS5.5. I opened a CS5 project, but when I try to play any of the videos, either in the Source Monitor or Program monitor, the playback stops after a fraction of a second. It doesn't matter what point in what video I'm at. On the other had, scrubbing through the videos is no problem.
    Does anyone have an idea what could be going on here? Needless to say, it's impossible to do any work within Premiere under these circumstances.

    Try what I recommended on this thread about this issue:
    http://forums.adobe.com/message/2949759#2949759

  • Premiere CS5 Video playback problems

    Dear All,
    I hope someone can help me out!
    I have finally managed to get the 64-bit upgrade sorted out. However, most of the time I try to start my trial version of Premiere, I get an error message saying "CS5 has stopped working". No explanation. Nothing. It just doesn't open.
    However, if I persevere long enough, after four or five attempts to start the program, it will inexplicably do so. My problem THEN is that a project I saved in CS4 seems to load OK but then I cannot get the video footage (unrendered) to appear in the preview window. Which makes the whole thing useless really.
    If I then click in the preview window, the footage WILL appear but only as a still on whatever frame it happened to be on. Again, making the entire shebang useless.
    So, if anyone has any brilliant tips on why these things are happening, do let me know. I feel like shooting someone! LOL
    I am quite happy to buy a copy of this thing IF I can be sure it will work. But I fail to see why Adobe are pretending these problems don't exist. No help from the support team via phone at all.
    Thanks
    Mark Birkett

    Bill
    Thanks for the welcome. I'm no expert on this subject so I'm not even sure I would know where to check the video-card driver. LOL.
    All I can say is that the trial version of Premiere CS4 had no such problems on this laptop. I'm now using Windows Vista, Home Premium, 64 bit. The CS4 trial ran fine on Windows Vista 32-bit (as it was before I upgraded) so I'm unsure why Adobe would have moved the goalposts in that regard?
    Thanks for your help.
    Mark Birkett
    Manchester England

  • Why when i run magic bullet with adobe premiere CS5 then adobe premiere CS5 does not run ?

    Hi there,
    I would like to ask you why when i am using magic bullet and then i am going to open the premiere CS5 , then the adobe premiere CS5 does not run ?

    First of all , I would like to thank you for the help.
    Secondly , I would like to inform you that I used to have the Adobe CS4 but one friend of mine change it into CS5 , but nothing worked properly after it. e
    I download the Adobe CS5.5 Master Collection (as trial) from the official site of the Adobe. Then , I download the MB http://www.redgiantsoftware.com/support/faq/product-specific/magic-bullet-looks/226/ from here but when i am going to use the filters , one X shows on the screen and i cant work... Any help ?

  • Premiere Pro CS5.5 mercury playback engine will be supported on GTX 680

    Could someone please confirm if Premiere Pro CS5.5 mercury playback engine will be supported on GTX 680.
    thanks

    Jim,
    Your comment was based upon results from the 560 Ti 448 card and that is € 240 or more. The 680 is € 440. That is 45% difference: € 440 - (0.45x440) = € 440 - € 198 = € 242
    Your comparison is based on a € 200 GTX 560 model, which only achieves a score of around 120 seconds, which is 55% less expensive (€ 440 - (0.55x440) = € 440 - € 242 = € 198) and more than 225% slower (120 / 53 = 2.26)
    So for 55% less expenditure, you lose more than 225% performance. That is very disappointing and would rank in the 'penny-wise-pound-foolish' savings. (But that is how your system can be ranked, at least in the past). There is another major flaw in your reasoning, you are only considering number of CUDA cores, nothing else. You are disregarding all the other aspects of the new architecture and that makes your argument very weak and flawed. You have to consider the number of cores AND the memory bus in combination. Something you obviously overlooked, but although the number of cores tripled in comparison to the 580, the memory bus was reduced to 256 bits width, a 50% reduction. That means that at best the expected performance gain could be 0.5 (memory bus) x 3 (number of cores) = 1.5 and not your 300%.
    To summarize:
    Now if you want to go the other way, with the 680 as the baseline, you'd say that for 60% less money, you still get 80% of the performance.
    For 55% less money, you get 44% of the performance on this test.

  • Premiere CS5 SN entered - asking for earlier product - earlier product SN is [removed] this is not accepted.  Why?

    My Premiere CS5 started asking for its serial number.  I entered it and was then asked for a qualifying product SN.   My earlier product is Premiere Pro - SN****-**** etc.  This is not accepted.  Can you tell me why?
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]

    Online Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • During app load, Premiere elements 11 stopped working all of a sudden. Why?

    Premiere elements 11 stopped working all of a sudden. Says "A problem caused the program to stop working correctly" I re-installed it but still the same.
    I haven't installed any other apps except adobe reader and there were a few Windows updates but that was it. Some history - I had defraged my hard drive when this started to happen. Wouldn't the re-install have fixed it if the de-frag caused this problem? What is causing elements to stop loading at the splash screen?

    DFMA
    Thanks for the follow up with the very helpful information.
    If this is one of those Importer QuickTime type issues, the answers are few if any.
    If you have not already tried
    Have you attempted to delete the Adobe Premiere Elements Prefs file and, if necessary,
    the whole 11.0 Folder in which it exists.
    then, please try the following...
    My expectations for the following are not high, but worth the time -
    1 uninstall the usual Control Panel way - you might want to uninstall QuickTime at the same time.
    2. free ccleaner run through (regular and registry parts)
    CCleaner - Download
    3. reinstall QuickTime and then Premiere Elements with anti-virus and firewall(s) disabled.
    Others on the list...
    1. Create a new User Account with Administrative Privileges and install and run Premiere Elements
    from there.
    2. Use a new set of installation files either from Adobe if you purchased the program from it as an online
    download, or get tryout installation files for 11 into which you can insert your purchased serial number.
    Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
    If the latter, read and carry out carefully the Note: Very Important Instructions in order to avoid an Access
    Denied message.
    We will be watching for your progress.
    Thanks.
    ATR

  • Can I run Adobe Premiere CS5.5 on MacbookPro with Lion??

    For the love of GOD!! Can someone please explain to me why I cannot effectively use Adobe Premiere CS5.5 on my MacBook Pro (Lion OS)??? I've tried getting all updates from both Adobe and Apple, still no luck. Playback is horribly choppy, resolution is diminished and the program appears to be useless...no one at Apple seems to know anything about Adobe. Sorry if this quesiton has already been proposed, but is their a basic overall solution to get Premiere to run on lion???

    CS5x will not use Cuda with any ATI graphics adapter
    Go to http://forums.adobe.com/thread/773101 and click on the link to the current list to see the (two?) ATI cards that work with CS6 for hardware Cuda
    For the OP... I am Windows... is a "Macbook" a notebook/laptop computer?
    If yes, read http://forums.adobe.com/message/4578948 for ideas on the "power" needed for laptop editing

  • 'Easing' in Premiere CS5

    I'm wondering if there is a way to use 'easing' (like in Flash CS5) when I'm moving and/or zooming into or out of an object.
    I've got a jpeg that I imported and put on a layer in Premiere CS5 and I start them zoomed way in and am zooming out over about 10 seconds. It seems to start to zoom out very slowly, but as it goes more zoomed out, it appears to speed up. I understand why this happening logically, but can't seem to figure out a way to stop it from happening. I'd like it to zoom out at the same pace no matter how small the image gets. In Flash, I would use easing or something like that. Since it's a still image, not footage, I can't use time re-mapping.
    I'm hoping the solution is easy and is staring me in the face...
    Thanks for any help!

    This explanes exactly how keyframing and keyframe interpolation is done.
    http://help.adobe.com/en_US/premierepro/cs/using/WS2A48F48C-8A53-4ef4-988A-58A122C2FCC2a.h tml

  • Premiere cs5 crash.

    Idk if its my Mac or Premiere Cs5. I have the pro master collection. And this only happens with premiere. Every 1 out of 3 times I have it open. For about an hour and Im working. The entire computer crashes.My work is saved because  save often. but Idk know why it dose this please help?

    When people report crashing on the Win side, there are generally 2 reasons
    Software crashes (PPro stops working) due to outdated or corrupt device drivers, especially the graphics adapter (video display) card, so the advice is to go to the vendor (nVidia or ATI or ???) and update drivers
    Some rare PPro crashes have been caused by having a USB device attached... scanner, flash drive, etc
    Hardware crashes (entire computer quits) are due to the computer working HARD for video editing, and a (usually) heat buildup due to lack of cooling or improperly mounted CPU cooling fan
    Both software and hardware crashes are fairly rare
    So... check your computer for updated device drivers and heat

  • Premiere pro crashes on playback but works fine in safe mode

    hey i installed premiere cs5 and updated with the latest update and when i playback footage the program crashes, i've tried safe mode and the program works fine & the video does wonderful and i can edit no problem, but of course there'e no sound so i can't edit like that, any suggestions?
    System specs: windows 7 professional 64 bit
    processor:         intel(R) core(TM) i7 cpu  860 @ 2.80GHz 2.79 GHz
    intalled ram:      8 GB
    op sys:  64 bit
    i get this
    problem event name:             APPCRASH
    application name:                 adobe premiere pro.exe
    application version:               5.0.1.0
    application timestamp:          4bf119d2
    fault module name:               display.dll
    and the list goes on...
    if anybody has a fix please let me know thanks

    Have you updated your video driver? If not, that could well be the issue. Go to the nVidia, or ATI Web site, and get the latest version for your video card.
    Now, something else to consider is that during boot up, something is loading, that is getting in the way. This ARTICLE will give you tips. In Safe Mode, those problem programs and processes are not loaded.
    Good luck,
    Hunt

  • Screen goes black for 3 seconds in premiere CS5 every time I click

    This is the first time I run Premiere CS5... On a fresh system install.
    I suspect it's not playing well with my video card, a Radeon HD 4870 with 1GB Ram... Very standard stuff.  I am running window 7 64 bit with 12 gb RAM, a week old build. I have all the updates and latest drivers, sigh. After Effects CS5 runs fine, Maya 2010 runs fine, Quicktime runs fine... What gives.
    Here's what happens: I only need to launch Premiere, right away I get the problem. The screen goes black 3 seconds before the prompt to create a new project. Once I create the project, the application workspace comes in, but if I click any menu, drag a tool window (whatever they are called), the screen goes black 3 seconds then comes back. Its basically impossible to work...Huge drag.
    Update:
    The problem stopped after I went into the 'device settings' in preferences and set the device to 'none'....When I clicked on the device settings panel, my monitor went black, and there was a 'no signal' warning that came up, as if the DVI-D  signal was dead. I was able to restore the signal by hitting ctrl-alt-del which switched me out of Premiere onto the desktop. Clearly, there is some issue with video. I switched back into Premiere and was able then to set to no devices.
    I'm not doing any capture at the moment, but I can only pray that it's some sort of bug related to not having a device connected? I plan on bringing footage from a RED in the next month. I upgraded to CS5 specifically so that I could use more than 4 gigs of RAM and for the new features.

    THank you for sending this.
    I followed the benchmark directions, and I get an error at the final step
    when I run the script:
    line 99
    Error: path not found
    I tried for an hour different things, namely to re run the whole test
    procedure, deleting the output files, etc... he script is looking for
    something in the preview files that it is not finding. I think the procedure
    was written for a previous version, because the metadata settings are
    different in my version of AME, and I don't know how much that affects it.
    Also, AME increments the file names when it renders them so that I did not
    get the right output file names at the first render. I had to turn off
    incrementing and manually name each clip before rendering. The vb scricpt
    looks for these names, so I understand it is important. I can't figure out,
    however, what the script is looking for in the preview folder and not
    finding.
    After spending almost two hours trying to troubleshoot the script, I gave
    up. I can tell you tho that it takes about 6-7 minutes on my box to encode
    all the videos.

  • PC Recognizes HV20 but no frames are captured in Premiere CS5? (Or HDVSplit)

    Hi there.
    Recently upgraded my laptop to a nice Sager NP8130 as a mobile editing workstation, and when I went to begin capturing HDV footage the other day, I wasn't able to!
    My PC detects the camera (Canon HV20) fine, it shows up in device manager as functioning. In Adobe Premiere CS5, and HDVSplit I can use the playback controls to shuttle the tape around, and I even get timecode feedback correctly on the PC.
    But no matter what, I can't get any dang video to capture!
    Camera and cable are definitely working fine; I dug out my old laptop and captured the footage I needed with no problem.
    If anyone has any ideas, or any experience with this error, I would dearly appreciate any input,
    Thanks!

    Unfortunately, with no success, I also tried that method of switching to the Legacy firewire driver, as it used to be a common suggestion back in the vista days.

  • Adobe Premiere CC"has stopped working error"

    Ran an update on Adobe Premiere CC last night. Now this error occurs. I did a system restore to 1 hour before the update. Adobe worked fine this morning. After I closed the program and logged in tonight the "has stopped working error" displays. Also Adobe will not import and .MOV files and the .MOV files that are already on the timeline are no longer there. Any help would be appreciated thanks.

    I have just had the same thing happen to me too. Everything has been working fine but today, Premiere has crashed/stopped working twice. I have managed to get back into it now, but it won't playback either the Source or Program Monitors, saying there is a 'Low-level exception in Adobe Player (Player)'.

Maybe you are looking for