Premiere cs5 and message "not responding"

I Have a brand new i7 system with windows 7 64bit, 6Gb ram, gtx 280 graphic card, one ssd disk 128 gb (main)
and two hard disk 2 TB as raid, proper for video editing (sata II, 7200rpm), i use intensity pro as outpout card.
I am trying to edit with premiere cs5 and I use few AE project.
Unfortunately the programm is unstable, very often i have the message "not responding", especcially when I load
projects and when i try to save my project. Also the programm working very -very slow.
Help, can someone help me? Iam very-very-very dissapointed and iam thinking if i have to try another programm.........
any help is accepted..............

i have installed 3.9.1 version and its seems to work properly.
I restarted the system.
I found that probably small projects (220 min avi ) work better instead
of the bigger projects (220 min avi video+10 AE proj+3 phd proj)
where the system frozen.
I think the problem is the volume of data transfer and the transfer capacity,
probably this is problem with the disk or partition?
Unfortunately I am not the expert about computers, basic electronics and
computers skills.
I wonder why cs5 worked properly when i worked with ouadro fx580 and
1tb hard disk (until 30 ayg 2010) and know -after the changes- with
raid 2 tb hard disk ang grx 285 graphic card the system ia almost
out of order.

Similar Messages

HT201412 My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

E -mail is froze up and will not respond when trying to open a message

Was de
Letting messages from email and app froze up and will not respond to try and open up or delete messages

Try resetting your device. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Adobe Premiere CS5 and Open Directory users - Premiere fails to start

We have several class rooms with desktops that are configured for Open Directory.
When a student logs in he's actually working in his home folder on the server and his user is also managed by the server.
This works fine for all the applications that we're using except for Adobe Premiere CS5 and Adobe After Effects CS5. Whenever a student tries to start one of them the application will hang and only a force quit can stop it. It is impossible to start these applications.
However, it is possible to use Premiere and After Effects using a local standard on the desktops. But I don't want to go that route. I want the managed users to be able to use those applications.
Has anyone found a solution for this?
Are you able to use this applications in a same environment?
I've played a lot with the permissions on the library, system and Adobe folders, but the problem doesn't seem to be related to them.
Setup:
AFP Server: Xserve intel running Mac OS X Server 10.6.5
OD Servers: Mac Mini Servers running Mac OS X Server 10.6.5
Clients: iMacs intel running Mac OS X 10.6.6

Safe Mode disables a lot of drivers and services, like networking. That would seem to indicate that something is running on your system that interferes somehow.
I'm just not sure how you'd go about tracking that down.

My iPod nano, 5th generation is frozen and will not respond. There is a charge, was just used 2 hrs ago, and has a song showing on the face but will not turn off or respond

MMy iPod nano 5th generation is frozen and will not respond. There is a picture of a an artist on it, it has a charge, was used fine 2 hrs ago, won't turn off ?..

Good Afternoon CPilkington1,
If your iPod nano is unresponsive, follow the troubleshooting steps below:
Apple - Support - iPod - iPod nano (5th generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano5gen/
If the issue is not resolved after following the steps outlined in the Troubleshooting Assistant, please reply to this post with additional information or any error messages that may appear.
Regards,
- Judy

Everytime i open a pdf document Adobe stops work by message not responding.

Hallo, I am having problems with Adobe on my computer. Every PDF document I open freezes and a not responding message displays. please assist.

If Adobe Reader stops responding and after a while starts responding again, you might be experiencing the same issues we were. For details check Adobe Reader 11.0.09 stops responding for 30 seconds after start
In short, you will either have allow Adobe Reader to access online services, or set one or more feature lockdown parameters (for the latter, check out the interesting recommendations put out by the NSA, https://www.google.se/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCAQFjA A&url=https%3A%2F%2Fwww.nsa.go…
/Patrik

My IPAD 2 is freezing on the principal internet explorer page. It presents the google home page with a grey filter over it and does not respond to any touch or key. All other internet dependent functions seem to be working (i.e. mail, various APPs etc.)

My IPAD 2 is freezing on the principal internet access page. It comes up through a light grey filter and does not respond to any touch or keys. All other internet dependent functions seem to be working fine (mail, various APPs). How do I "unfreeze"?
thanks
geoff1949

Geoff-
Go to Settings-Safari and Clear History and Clear Cookies and Data.
Another thing you can try is to double-click the Home button. A row of recent Apps will line up along the bottom of the screen. Scroll across and find the Safari icon. Press on it for a couple of seconds until it starts to wiggle. A red minus sign will appear on each icon. Press on Safari's minus sign to remove it. This may clear its memory of the bad Google page.
If this does not help, try resetting (rebooting) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred
Message was edited by: Fred*M.

Keep getting the message not responding when playing Facebook Help

HI,
when I am playing a game in facebook, I keep receiving message not responding and I have to shut the system down and reopen I have tried cleaning history which does not help. I believe the problem might be firefox Is there any way you can check and let me know. I have done most of the little message that show on the first here and still it does not help.
Regards,
Kathy

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Hello. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!!

Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!

Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

PS CS6 64 bit hangs and does not respond

On Windows 7, PS CS6 64bits hangs onto a side of desktop and does not respond as it launches. No error messages. 32 bits works fine. PS5.5 64 bit works fine. Only the regular windows 7 updates (no driver updates or other program updates other than Adobe Acrobat Reader) have been installed since I installed PS CS6 extended. Any idea what is happening? Worked fine for awhile.

It it worked fine for awhile then failed I would reset the preferences.
Start Photoshop and IMMEDIATELY hold down the Ctrl +Alt + Shift keys. You should get a reset window. If you see the splash screen you are too late.

Premiere CS5 and codecs

I have a problem with Premiere CS5 (And all other video software for that matter) and the supported video formats.
What I did was, I installed the Master Collection trial version and when I actually purchased the software I entered the serial and done!... I thought...
I know that in the trial version a lot of the codecs are blocked so I thought something might have gone wrong there so when I received the actual Discs I tried reinstalling Premiere but with the same result:
I wanted to import an IMX 625/50 .mov file but it just wouldn't work, eventhough that should be supported as far as I can tell. Also my export format list was very limited to pretty much the standard codecs from what I can see. So after a bit of trying and reinstalling etc. I installed Final Cut Pro 2 and everything is running fine now, with big lists of export and import possibillities in all the adobe video editing software.
So the question is: Did I miss something when upgrading from the trial version to the full version

Depending on the particular FLV files, they should Import into CS5.
I think that capability was added with the last update of CS4 - CS4.2.1. Before that, one needed something like the Moyea FLV Importer for PrPro, which was a plug-in.
Now, the CODEC used in the FLV might/might not be an issue. I do not know the exact Flash CODEC's that will function properly, but it seems that Todd commented on that in an earlier thread here.
In a worst-case scenario, Moyea does have various Flash utilities and programs, and they might help, if some of your FLV's do not work properly.
Remember, FLV is a delivery format, and is designed primarily for streaming Web content. A great deal of the quality will have been squeezed out of the file, but if the FLV's are all that you have to work with, you are stuck on the quality issue.
Good luck, and let us know what you find out, regarding the various Flash CODEC's and CS5.
Hunt

Photoshop failed to quit and is not responding

I've had a nasty problem for the past few days that seems to be getting gradually worse. ie it now happens within a few minutes of openning Photoshop, whereas before it was happenning after an hour or two of working on an image....
At some point while working on a moderately complex .psd (roughly 70mb with some 15 layers) Photoshop hangs and Force Quit Applications tells me that Photoshop is not responding. I can't identify anything particular that i'm doing that triggers it.... i use a fairly wide variety of tools and filters and the hang doesn't seem to be triggered by anything specific.
I force Photoshop to quit, and it disappears from the Force Quit Application list. However, after quitting, I cannot open .psd or .jpg files from Bridge or from Finder. Raw files open up ok from Bridge into Camera Raw. And, when I try to shut down or restart my machine i get: " Logout has timed out - The application Photoshop failed to quit and is not responding." so the only way to restart is to force a shut down with the power button. After restarting the Mac Photoshop works ok again for a a while and then the problem happens again.
I have repaired my disk permissions and run Diskwarrior over both my Mac HD ad the external Firewire drive where all my images live - which didn't identify anything out or the ordinary.
Any thoughts on what else I can do to eliminate this problem would be v gratefully received
I am working on a Dual-Core Intel MacPro with 9GB memory, running OS 10.4.11 and Photoshop CS3 10.0.1 and Bridge CS3 2.1.1.9

Neil, just for reference the Cron script problem was fixed in 10.4.2 and should be run on boot if they haven't already. This doesn't mean that running cocktail occasionally to make sure doesn't have value or to run the maintance scripts early doesn't help (it wont hurt).
Nick
The 3 Gb limitation is a limitation of 32bit operating systems and software. Photoshop can't address (use) more than 3Gb regardless of how much you have free or installed. OSX 10.4 is kind of 64bit but not completly, it has the ability to remap memory so EACH program can use a max of 3Gb. so in your case with 5ish Gb used PS is using 3Gb, Safari is using a bit and the OS is prob using most of the rest.
Looking at what you posted the only two figures your really interested in is the Used and Free (which add up to approx 9Gb). The fact that the used number doesn't change from the several files open and the liquify filter opening indicates to me that it has already grabbed as much memory as it can( it's using 3Gb of the 5.52, the rest is the OS etc).
Simply put PS IS running out of memory. You can help this by putting the memory allocation in the PS preferences higher (the OS will use other areas of memory so it wont cause a problem) and make sure the scratch disk is set to a drive with plenty of space. But keep in mind the Liquify filter is VERY memory intensive so you may not be able to use it with lots of files open.
BRETT

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation!

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy

Premiere cs5 and message "not responding"

Similar Messages

Maybe you are looking for