Premiere CS5 constantly freezing & unfreezing

I've been using Adobe Premiere Pro CS5 for about 1 year now and I've never had problems with my hardware not being fast enough to handle my projects. I am editing 1920x1080 24p video from my 7D. I only have two video tracks and three audio tracks and the program constantly freezes and unfreezes only to freeze again moments later. The length of the project is approximately 1 hour and 45 minutes long. Does anyone know of any known issues inside of premiere that I might try to speed things up?
Here are my computer’s specs:
Windows 7 Pro 64bit
Intel Core 2 Quad 6600 2.4GHz
8GB of DDR2 ram
Separate 7200rpm hard drive for video files
NVIDIA Geforce 9600GT
I know my video car is not combatable with the mercury playback engine, but I feel like the software shouldn’t be freezing with two videos layered.
I have antivirus software turned off, indexing turned off, internet disabled, and no other programs running. It seems as though I can open other Premiere projects without the program freezing. Is it possible one of the video files is causing the program to perform poorly?

Thank you all for your answers. I think I have a combination of issues.
1. Outdated computer. I will be purchasing a completely new computer in
2012. I'd like to hear you suggestions for a windows 64bit set up. Is
16GB of ram enough? I was going to get a Intel i7 3.4GHz processor. Which
video card should I get? Trying to spend about $1,000 on the mother board,
video card, ram, and processor. Should I use a RAID configuration?
2. I was trying to edit 23.997 fps footage in a 29.997 timeline... oops.
I restarted and used the correct frame rate in my project to match my
footage and everything works fine.
3. I installed all of the recent updates yesterday. Seems to be helping a
little.
Has anyone tried to force Premiere to utilize an NVIDIA Geforce 9600GT for
the mercury playback engine?
Thanks for all your help...

Similar Messages

Premiere CS5 Constantly Crashing

Have you tried exporting anything yet? I've tried exporting things over & over. Tried using different formats (uncompressed avi, flv/f4v, mpeg4, mpeg2, etc.), qeuing in Media Encoder (CS5) and forget it. So yeah, that's why I'm here. It'll crash every time you export. Then if you've qeued it to Media Encoder, it'll show errors. Every other program in the package works fine. Premiere exports? Forget it.

>HD 7200rpm, Nvidia Video card
Only one hard drive is not NEARLY enough! (I have 3 drives)
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
- you need AT LEAST 2 drives for video editing, 3 is better
- some HD formats work better with (require) RAID
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Which model nVidia card, and what is the driver number?

Premiere CS5 Constantly Crashing -- NOT

It hasn't crashed once since we installed it. Is this thing stable or what?

I have had it crash a couple of times during very long edit sessions and using AE
with dynamic linking.
Well, I don't think it was Premiere's fault - was trying to export to AME and it gave an error trying to establish the link - I found that I had 5 instances of Premiere Pro headless running - I don't know what caused that though.
Otherwise, I've found it to be pretty stable so far during extensive use
Very large projects can take some time switching between apps - but Adobe know about that.
Paul.

Premiere CS5 post alt-tab freeze

Hi all
I have this problem with Premiere CS5 (but I had it with ALL previous versions...)
If I import a lot of clips (let's say 100, a normal amount for a normal edit) - in this case P2 clips, but images or other format is the same, everything works fine.
Whenever I try to switch back and forth from/to PPRO CS5 using ALT-TAB or mouse click on windows app bar, Premiere "freezes" for many seconds, sometimes MINUTES, I would say in proportion with the number of clips in my project. It seems like every time I switch back to Premiere, it loads all the clips again, or check them or something like that.
Since going to Photoshop or another app is very frequent during editing, this is really frustrating.
I tried on many different machines, all Quad cores with 8 gigs of RAM, so in general powerful systems, but the problem remains.
It is not a disk read problem because Premiere SHOULD NOT READ anything switching back to it, and anyway I have fast disks and a 100 MB/S NAS.
Something I am missing? Some hidden switch...?
Or a terrible BUG, that continues from the beginning of the creation of Premiere?
By the way, Windows system, at the moment Win 7 64bits, but this bug was there with Vista, XP32... etc.
Thanks
Valerio Oss
PIXEL CARTOON

Add my name to the list of having the "Not Responding" message come up every time I click anywhere outside Premier Pro. It takes 10 seconds (sometimes longer) before Premier Pro CS5 becomes available again and attempting to work before this delay is completed causes the screen to become a white tranlucent which will change back to normal after the 10 second delay. The Not Responding message is displayed after about 5 seconds
The computer in question is Win7 x64 with an i950 processor, 24 GB of ram and a four drive RAID 5 configuration.
On the good side, from what has been written here it looks like in PP CS5.5 this issue is resolved.
This makes having acquired PP CS5.5 a little easier to swallow. Now if only Adobe would deliver the DVDs... Yes I know it can be downloaded, but I really don't want to download the Master Suite trial version this time while I'm waiting for the DVDs
Cheers,
Michael
Ps. when editing with a file from an external RAID volume, connected via Silicon Image Sil 3132 SATALink Controller, the "Not Responding" message takes more than 13 seconds to get back to normal.

Long load times normal for Adobe Media Encoder from Premiere CS5?

When I export a sequence from Adobe Premiere CS5 using Adobe Media Encoder, the system freezes for several minutes before giving me the exporter screen. Then, when I've loaded my settings and clicked "export," the system again freezes for several minutes before beginning to encode. I'm using a system with an Intel I7 CPU 930 @ 2.80Ghz 2.80 Ghz., 24 GB of ram, Windows 7 Ultimate 64 bit operating system and an Nvidia quadro FX4800 graphics card.. Everything else is fast, but AME is slow. Is this normal? Should I reinstall AME?

Not sure what you mean about the process. From Premiere CS5, I click on "export" which brings up a menu. I select "media" from the menu which brings up the Adobe Media Encoder. I adjust my settings and click "export" from the bottom of the screen to immediately render the Premiere file. Clicking "Queue" would put the program into the AME Queue. Am I missing something? On the slowness issue, looks like I need to reinstall AME. I've been reluctant to do that, partially because I'm using some Matrox hardware and I'll have to reinstall the Matrox softare to populate the matrox settings into the media encoder. Looks like it may be worth it.
Thanks.

Iphone 6 -- iOS 8.1.3 -- screen constantly freezing, Apps instantly crashing, Photos not deleting, iMessages disappearing, iCloud not reflecting correct backups

Ever since downloading iOS 8.1.3 on my iPhone 6, I've been experiencing quite a few issues (I am assuming all are related to the update, but not sure)
I apologize in advance for the lengthy post! Here goes:
     • Screen constantly freezes--sometimes it freezes on the home screen (no apps open), other times when I am in Settings, Photos or any of my downloaded apps. Each time this happens I have to restart the phone by holding the home and lock buttons in order to unfreeze the screen...this happens approximately 4-5x per day.
     • All of my apps either freeze or crash upon opening, and my Mail app either refuses to stay open or it will show an empty inbox with 'no mail' --even though my email has always been synced to the phone.
     • I am not receiving a lot of iMessages or incoming calls to my iPhone, but most of the missing iMessages will appear on my MacBook Pro. And when I do receive iMessages normally, entire portions of certain conversations--both sent & received--keep disappearing (whether my iphone is on all day or if I have to restart it). *the convo that has gone MIA on my iPhone will still appear on the other persons phone.
     • When I open Messages or Recent Call logs, the contact names do not appear..only 10-digit phone numbers. (Even though all of the #s are saved by name in Contacts).*This has only happened a few times so far.*
     • Furthermore--and most frustrating!--my camera and photos are practically inaccessible. Almost every time I open 'Photos', the app crashes.. I have no available storage to use the camera so when I try to select photos and hit 'delete' the app crashes instead of deleting the photos.
     • I have considered performing a factory reset... however, my iCloud states I have 4.6gb available (w/ 5gb plan) even though my photos are turned on in iCloud, and should be taking up most of the 5gb storage space..they appear 'On,' but do not show up under 'Manage Storage'...the only apps/documents/data shown are WhatsApp and Mail so I am afraid to reset the phone as I have no idea if the photos are actually backed up or not.   (Screenshots are attached)
If anybody has been experiencing any of the same issues I would greatly appreciate your insight or advice for how to fix this! I'm hoping it is just a bug with the new iOS software and not an issue with my phone itself as it is only 3 months old.. Thank you in advance!

**Adding to the final photo in my original post... When I select the 'Kendall Anderson's...This iPhone' using 324.2MB, Photo Library is turned 'On', but has 'No Data'....I know this is not possible because my photos that were previously backed up used up ~3.5GB of storage.
Either I am doing something wrong here, or my iPhone just has a mind of its own with this new update!

Thumbnails not loading, crashing in Premiere CS5.5

I'm working with a ton of Apple XDCAM EX 1920x1080 files. It was shot over the course of five days, organized by day and then each day has folders for each card. I'm importing all the footage into Premiere CS5.5. Because there is so much footage I like to look at things in thumbnail view to quickly see what's what. But, starting in Day four and going into Day 5, the clips stop loading thumbnails. When I click on some of these "blank" clips, Premiere freezes up and crashes.
I have an older build of CS6 (my company has yet to actually BUY CS6) and the problem doesn't happen. All the clips have thumbnails. Any thoughts? Thanks in advance for your help.

I'm working on a 2010 Mac Pro, OSX 10.6.8, with Premiere 5.5.2. The issue is happening in the Project panel. Nothing has been added to the timeline (but the Sequence settings are Sony XDCAM HD 1080p, 23.976fps). The crash is indeed from a corrupt file, but it was only one. The rest play back fine in the Source monitor, no crashing, just no thumbnails.
For testing, I opened a new project in FCP and all the thumbnails show up and it even plays back the corrupt file. And, as I said, they show up in an older CS6 build of Premiere.
It's not THAT big of a deal, just a minor frustration. Wanted to see if its happened to anyone else. Thanks guys!

Premiere Pro CS3 Freezes MBP

We've been discussing this on Adobe's forum, but thought I'd throw it out here as well: Premiere Pro CS3 constantly freezes (beachball) the MacBook Pro, like every five or ten minutes or so. No solution over there yet. Trash prefs, plist, run Disk Utility, reload software, even logging in as root (that works for a little while longer than usual, but still freezes). Premiere CS3 seems to run fine on a tower, just does not run on MBP. Any ideas? We're desperate!

Usually happens in 5 or 10 minutes, never takes any longer than that. Scrubbing timeline fast will do it every time, i.e., you can force a freeze by scrubbing very fast, which is what I did to answer your questions. It only took 10 seconds to freeze:
There is 2.95GB free RAM at time of freeze. FYI, sometimes (like this time) activity log shows that PhotoShopServer stops responding before Premiere does.
Nothing else needs to be running to freeze Premiere.
I'm not good at reading the logs, I'll admit, but really, I can't find a log that says anything went wrong. What exactly am I looking for?
Here is a link to topic on Adobe's forum:
http://www.adobeforums.com/cgi-bin/webx/.3bc478c1
Thanks for your help, we really need it.

Premiere CS5 crash in new Mac Pro 2010

I have two problems:
1. Sometimes when I make double cick in premiere icon, the program don't start. I see the previous premiere window with the 4 last projects, but I can not select anything, because the pointer mouse become a beach ball. I have to turn off the program with Alt+Cmd+esc.
2. The big problem. Premiere CS5 5.0.0 crash editing while I'm making marks In and Out in Source window or playing the timeline. The 3 monitors became black or freeze, mouse disapears, sounds freeze and I have to restart with power button.
I have last Mac Pro 2010, 2,8GHz Quad-Core Intel Xeon, Mac OS X 10.6.4, 8GB RAM, ATi Radeon 5870, 3 x Hard disk 2 TB, 3 monitors connected trought DVI double chanel, and two minidisplayport-DVI double chanel.
Sorry for my english.
Any help or doubt about my explanation?

Thanks Todd!
I install Premiere Pro CS5 (5.0.2) update, and the graphics update from apple but the problem persists. I disconnected two monitors, too.
It's very extrange because I had a configuration system running ok, premiere running ok, everything good, but the system hard disk crashes.
The problem is when I reinstall a backup copy of that system in a new hard disk, then Premiere don't start, and when start then crashes editing. All of the programs are running well, and other adobe CS5 applications, too.
The old hard disk is a Hitachi 2TB (originally from apple), and the new hard disk is a Western Digital caviar black 1TB.
I make the backup system from a *.dmg file. I tried with time machine, with disk utilities and with Carbon Copy Cloner. The result is always the same. Premiere won't start.
I think I have small ghosts inside my computer =)
Maybe is question of a bad clone but this is not a complicated task.
Maybe is question of permits. But I resolve the permits question with disk utilities.
Do you think is question of the clone image?
Now I'm reinstalling a new copy of Leopard SO after formatting the new hard drive western digital 1TB. I will install only the CS5 adobe master collection, to tried in a clean system.

Premiere CS5 & GTX470, 2.5Ghz quad performance ?

Hi All,
Thanks for the great contributions in this forum.
I am having trouble with a multicam project with 5 video layers of HD (2 layers 1440 x 1080 HDV and 3 layers 1920 x 1080 from Canon DSLR's) at 29.97.
The playback performance is stuttering and freezing but the sound keeps going. The sequence is setup as HDV 1080i30 (60i).
I wanted to know if my system specs. up to scratch to handle this multicam edit? Should I expect a smooth uninterupted edit or are my expectations too high?
Has anyone else have similar issues and how did they reslove them.
GPU is definitely enabled as the renderer, but the processor is maxing out.
The overall computer RAM usage is 2.8 Gb, but watching the processes in the task manager, Premiere seems to not use more the 2Gb RAM.
I have distributed the video across 3 hard drives plus a separate OS drive.
I have just upgraded my videocard to a Gigabyte GTX470 hoping take advantage of the mercury engine.
Computer specs as follows:
I am running Premiere CS5 version 5.0.2 on freshly installed W7.
Motherboard P5K; CPU Q9300 2.5Ghz quad
4 gig ram
Gigabyte GTX470
750Watt Antec Truepower
4 x various 7200 drives

Thanks Baz and Harm for your recommendations,
I will start with a RAM increase then try the CPU. I don't normally have this many heavy layers at once. It is a one-off job.
Otherwise will go for the full upgrade.
Best wishes

Problems with premiere Cs5.5

I am having more and more problems with premiere CS5.5... I am running it on a windows base system. It freezes all the time and now I am not able to render... can someone, please, enlight me why? I am not using creative cloud, just the old set up... thank

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Upgraded to Firefox 4.0.1 for Mac, constantly freezes and crashes, have to force quit, bad bugs. Switching to Safari.

I upgraded to Firefox 4.0.1, and it now constantly freezes, won't respond at all, and has to be force quit and restarted. Within less than 5 minutes of use, over and over and over... I'm assuming it is a bug in the Mac version.... Am switching to Safari as I can't waste this much time constantly quitting and restarting and getting my tabs all back up. Any suggestions on ways to let Firefox know about the bug would be greatly appreciated. It worked fine until I upgraded :( Am running Mac OS X 10.6.7

This article should be helpful-
https://support.mozilla.com/en-US/kb/Firefox%20hangs

Screen goes black for 3 seconds in premiere CS5 every time I click

This is the first time I run Premiere CS5... On a fresh system install.
I suspect it's not playing well with my video card, a Radeon HD 4870 with 1GB Ram... Very standard stuff. I am running window 7 64 bit with 12 gb RAM, a week old build. I have all the updates and latest drivers, sigh. After Effects CS5 runs fine, Maya 2010 runs fine, Quicktime runs fine... What gives.
Here's what happens: I only need to launch Premiere, right away I get the problem. The screen goes black 3 seconds before the prompt to create a new project. Once I create the project, the application workspace comes in, but if I click any menu, drag a tool window (whatever they are called), the screen goes black 3 seconds then comes back. Its basically impossible to work...Huge drag.
Update:
The problem stopped after I went into the 'device settings' in preferences and set the device to 'none'....When I clicked on the device settings panel, my monitor went black, and there was a 'no signal' warning that came up, as if the DVI-D signal was dead. I was able to restore the signal by hitting ctrl-alt-del which switched me out of Premiere onto the desktop. Clearly, there is some issue with video. I switched back into Premiere and was able then to set to no devices.
I'm not doing any capture at the moment, but I can only pray that it's some sort of bug related to not having a device connected? I plan on bringing footage from a RED in the next month. I upgraded to CS5 specifically so that I could use more than 4 gigs of RAM and for the new features.

THank you for sending this.
I followed the benchmark directions, and I get an error at the final step
when I run the script:
line 99
Error: path not found
I tried for an hour different things, namely to re run the whole test
procedure, deleting the output files, etc... he script is looking for
something in the preview files that it is not finding. I think the procedure
was written for a previous version, because the metadata settings are
different in my version of AME, and I don't know how much that affects it.
Also, AME increments the file names when it renders them so that I did not
get the right output file names at the first render. I had to turn off
incrementing and manually name each clip before rendering. The vb scricpt
looks for these names, so I understand it is important. I can't figure out,
however, what the script is looking for in the preview folder and not
finding.
After spending almost two hours trying to troubleshoot the script, I gave
up. I can tell you tho that it takes about 6-7 minutes on my box to encode
all the videos.

I downloaded the new Firefox but it constantly freezes, doing absolutely nothing, and I can't even close it from my Mac dock bar, I have to turn off my laptop using the power button as Firefox won't let me shut down. What can I do?

Hi
I recently downloaded the new Firefox (Firefox 4, I think - you can tell I'm very tech savvy!) and it constantly freezes, I can't do anything with it at all - I can't even close it from the icon in my Mac dock bar.
I have tried restarting my computer - though I have to turn it off by using the power button as as Firefox is open and totally unresponsive it won't let me shut down. About a minute after re-starting Firefox, restoring my tabs or starting afresh, it freezes again.
This is obviously very annoying and I'm not sure what I can do about it. Firefox is my preferred browser, and I'd really like to be able to use it again!

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

Mac Book pro Retina (15 inch early 2013) is constantly freezing.

Problem description:
My Mac is constantly freezing, for (how it looks like) no good reason. Sometimes it occurs when I load League of Legends, sometimes it does not, also it just froze when I opened Iphoto, so I am not sure why this happens. So when I shut the Mac down, which is, or so it seems the only thing I can do, at the time of the freeze, it tells me, I have a graphic problem, but I am never able to see the report. Yea this is my problem right now with the mac, thanks for reading.
EtreCheck version: 2.1.6 (109)
Report generated 26. Januar 2015 22:04:32 MEZ
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Early 2013) (Technical Specifications)
MacBook Pro - model: MacBookPro10,1
1 2.7 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery Health: Check Battery - Cycle count 669
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD spdisplays_2880x1800Retina
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10 (14A389) - Time since boot: 0:13:2
Disk Information: ℹ️
APPLE SSD SD512E disk0 : (500,28 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 499.05 GB (65.20 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hotspot Shield.app
[not loaded] com.anchorfree.tun (1.0)
/System/Library/Extensions
[loaded] com.Cycling74.driver.WondershareAudioDevice (1.5.2)
[not loaded] com.ZTE.driver.ZTEUSBCDCACMControl (1.1.7)
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.2.19)
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.2.19)
[not loaded] com.novatelwireless.driver.3G (3.0.7)
[not loaded] com.novatelwireless.driver.DisableAutoInstall (2.0.6)
[not loaded] com.option.driver.Option72 (2.15.0)
[not loaded] com.option.driver.OptionHS (3.26.0)
[not loaded] com.option.driver.OptionMSD (1.21.0)
[not loaded] com.option.driver.OptionQC (1.11.0)
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.38)
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.38)
[not loaded] com.vodafone.driver (3.0.5)
[not loaded] de.novamedia.driver.NMLGEDriver (3.2.10)
[not loaded] de.novamedia.driver.NMSamsung (0.0.2)
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1)
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2)
/System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6)
/System/Library/Extensions/NMHuaweiPhonesVTPCDC_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMControl (3.2.12)
/System/Library/Extensions/NMLGEDriver.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMLGEUSBCDCACMControl (3.1.9)
[not loaded] de.novamedia.driver.NMLGEUSBCDCACMData (3.1.9)
/System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMData (3.2.12)
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (3.0.7)
/System/Library/Extensions/Vodafone.kext/Contents/PlugIns
[not loaded] com.vodafone.driver.Data (3.0.5)
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist
[running] com.rim.BBLaunchAgent.plist
[running] com.wondershare.AllMyMusic.Agent.plist
[running] de.novamedia.VodafoneDeviceObserver.plist
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist
[loaded] com.oracle.java.Helper-Tool.plist
[running] com.rim.BBDaemon.plist
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
Skype UNKNOWN (missing value)
VMCStatusMenu Programm (/Applications/Vodafone Mobile Broadband.app/Contents/Resources/VMCStatusMenu.app)
Vodafone Mobile Broadband Programm (/Applications/Vodafone Mobile Broadband.app)
Internet Plug-ins: ℹ️
iPhotoPhotocast: Version: 7.0
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.235 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.287
NP_2020Player_IKEA: Version: 5.0.7.0
QuickTime Plugin: Version: 7.7.3
Google Earth Web Plug-in: Version: 6.1
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4
JavaAppletPlugin: Version: Java 8 Update 25
User internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: Unknown
Safari Extensions: ℹ️
Adblock Plus [Installed]
3rd Party Preference Panes: ℹ️
Flash Player
Java
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.05 GB Disk used: 433.85 GB
Destinations:
forward to the past [Local]
Total size: 999.86 GB
Total number of backups: 8
Oldest backup: 2013-08-09 22:16:33 +0000
Last backup: 2015-01-05 14:31:03 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 433.85 GB X 3)
Top Processes by CPU: ℹ️
      5% mds
      5% WindowServer
      2% launchd
      2% Pages
      1% loginwindow
Top Processes by Memory: ℹ️
550 MB Safari
429 MB Pages
309 MB WindowServer
172 MB Dock
155 MB iTunes
Virtual Memory Information: ℹ️
5.30 GB Free RAM
8.60 GB Active RAM
1.87 GB Inactive RAM
1.41 GB Wired RAM
2.68 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 26, 2015, 09:52:40 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Vodafone Mobile Broadband_2015-01-26-215240_[redacted].crash
Jan 26, 2015, 09:52:05 PM Self test - passed
Jan 26, 2015, 01:26:23 AM /Users/[redacted]/Library/Logs/DiagnosticReports/UserKernel_2015-01-26-012623_[ redacted].crash
Jan 25, 2015, 11:48:24 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Vodafone Mobile Broadband_2015-01-25-234824_[redacted].crash
Jan 25, 2015, 10:53:45 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Vodafone Mobile Broadband_2015-01-25-105345_[redacted].crash
Jan 25, 2015, 12:59:04 AM /Users/[redacted]/Library/Logs/DiagnosticReports/UserKernel_2015-01-25-005904_[ redacted].crash
Jan 24, 2015, 08:54:12 PM /Users/[redacted]/Library/Logs/DiagnosticReports/UserKernel_2015-01-24-205412_[ redacted].crash
Jan 24, 2015, 06:49:56 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Vodafone Mobile Broadband_2015-01-24-184956_[redacted].crash

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Premiere CS5 constantly freezing & unfreezing

Similar Messages

Maybe you are looking for