Premiere CS5 has started running really slow!
Hi, this is probably an old question, but does anyone know who to rectify the problem whereby Premiere Pro CS5 begins to become very sluggish to the point where even adding a transition takes forever. Yesterday the programme was running fine - after a few renders, adding titles, clips etc, it has become extremely slow. It's only a 6 minute video. Many thanks.
More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Similar Messages
-
My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.
Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
Mac OS X 10.6 Help: Reinstalling Mac OS X -
My Macbook has started running really slow, help!
Hello, my Macbook has started to run at a far slower pace than usual. I have had my macbook since December of 2010 and for the past few weeks I have noticed that the rainbow wheel would appear when I would try to do even the most simplest of things (i.g. open Microsoft Word). Using the terminal's top command I would notice that the fc-cache would use a high percent of the system. However that ceased using the command "fc-cache -f -r -v", and it seemed as if the font fc-cache stopped. However that did not stop the problem.
I then decided to run a EtreCheck run and the following came out:
EtreCheck version: 1.9.13 (49)
Report generated August 15, 2014 at 1:23:55 PM CDT
Hardware Information: ?
MacBook (13-inch, Mid 2010) (Verified)
MacBook - model: MacBook7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 34 days 11:23:11
Disk Information: ?
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 249.2 GB (205.4 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5970H
USB Information: ?
SanDisk SanDisk USB 8 GB
S.M.A.R.T. Status: Verified
ANGEL'S USB (disk1s1) /Volumes/ANGEL'S USB: 8 GB (4.63 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ?
Anywhere
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents: ?
[running] org.macosforge.xquartz.startx.plist Support
User Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
DirectorShockwave: Version: 12.0.9r149 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ?
Omnibar (Disabled)
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
7% Google Chrome
5% WindowServer
1% hidd
0% X11.bin
0% Activity Monitor
Top Processes by Memory: ?
54 MB Google Chrome
43 MB com.apple.quicklook.satellite
41 MB Finder
41 MB Mail
35 MB Google Chrome Helper
Virtual Memory Information: ?
86 MB Free RAM
563 MB Active RAM
510 MB Inactive RAM
343 MB Wired RAM
14.06 GB Page-ins
487 MB Page-outs
If someone could please help that would be amazing.
Thank you very much!I'll take a wild guess that the most noticeable slowdown began after you installed OS X Mavericks.
1. You have plenty of hard disk space, 205GB available of 250GB, but you have only 2GB system RAM installed. 2GB RAM was adequate for acceptable performance using OS X 10.6 Snow Leopard.
Technically, Apple specs say that OS X 10.9 Mavericks REQUIRES just 2GB RAM, but realistically, 2GB is not nearly enough to run it with decent performance, especially if you run both a browser and other application programs simultaneously. Your system can hold a maximum of 16GB RAM. Upgrading to 4GB RAM would absolutely help performance. Upgrading to 8GB might provide additional performance with OS X Mavericks. I won't speculate on the benefits of 16GB.
Disclaimer: I use OS X 10.8 Mountain Lion as my primary operating system, about 8 hours every day. I run Mavericks once a week or less for a couple of hours, and for only one application, so my experience with Mavericks is limited, and your use is likely considerably different. I use OS X Mavericks to run Windows 7 using Parallels 9, in order to use my licensed copy of Windows MS-Office 2011. I didn't like Windows 7 performance with Parallels 9 running in Mavericks with just 4GB installed on my mid-2011 2.5Ghz iMac, so I upgraded to 8GB.
Macs are notoriously picky about system RAM, and not all RAM vendors are the same when it comes to Mac. I recommend purchasing your Mac RAM upgrade from Apple, Crucial.com, or Other World Computing http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_Whi te
Depending upon where you purchase the RAM and whether you are confident to install it yourself, a 4GB RAM upgrade will likely cost well under US$100. 8GB would likely cost around $100. Your Mac can use up to 16GB, at a cost over $200. Before spending any money to upgrade an older computer, always consider how much you're willing to spend on a 4-year-old computer, versus saving that money, if you have plans to purchase a new(er) Mac in the near future.
Recent generations of Mac computers seem to be highly reliable. My son has a mid-2009 aluminum MacBook Pro that easily survived 4 years of college and is still going strong. We just recently upgraded his system to 8GB RAM so he can try out Mavericks on a spare external drive before he decides whether or not to upgrade.
2. You're running Google Chrome browser. I don't use it based on advice in several discussion threads within Apple Support Communities from users who are far more knowledgable that I am about such things. They say the Chrome browser does not use RAM very efficiently, and that Firefox and Safari are better.
3. You haven't rebooted your computer in 34 days. With such limited RAM, until you upgrade, rebooting the computer at least every few days could increase performance a little bit. Some programs, particularly web browsers, often take huge amounts of available RAM and open dozens or even hundreds of links, then don't release RAM properly when you close browser windows. -
My MacBook Air just started running really slow
I have a MacBook Air and Safari started running really slow and I'm not sure why. I'm not very tech savy, so I'm having a hard time figuring out what's going on.
Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
Select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference? -
Hi. I tried using Pinterest tonight and got a message that I have a bot in my network..what is this, and how do I get rid of it? My phone has been running really slow too on Safari (but not on Google Chrome)
Google changed their menu bar. Firefox hasn't used Google for the default homepage since the Firefox 3.6 versions. Firefox 4+ versions use '''about:home'''.<br />
http://www.theverge.com/2011/11/29/2598717/google-bar-redesign-rethinks-the-navigation-bar -
I am using Mac OS 10.7.5. During the last week, it has started running very slow. Any thoughts?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
My macbook pro is 18 months old and has started running v slow. When I start it up it takes 5 minutes to load etc? Is there anything I can do to fix it?
try some suggestions from this article: http://www.maclife.com/article/feature/25_ways_speed_your_mac
-
My Macbook Pro started running really slow
This week my Macbook Pro started running super slow, taking ages to open programs and giving me the color wheel alllll the time. I've never had problems like this before! I'm not running many applications or doing anything unusual but it's just running extra slow. Once or twice it has also totally gone to sleep while I was in the middle of using it, and I had to wake it back up. It has also been getting really hot and the battery life seems worse...! This is all new, I'm using my computer just as I always have but it suddenly has issues.
The only thing it has been doing for a while is sometimes the screen will go blue - this either corrects itself within a few seconds or if I close my Macbook and then reopen it, the screen is back to normal. This is very rare though and I don't know if it's related to the slowness problem.
What can I do to fix this??
Mac OS X 10.6.8
2 GHz Intel Core i7
4 GB 133 MHz DDR3
I just ran EtreCheck -
Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6490M - VRAM: 256 MB
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 1 day 3:59:13
Disk Information:
Hitachi HTS725050A9A362 disk0 : (465.76 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) / [Startup]: 465.44 GB (235.1 GB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple, Inc. MacBook Pro
Kernel Extensions:
com.digidesign.iokit.DigiDal (8.0.3f1)
com.paceap.kext.pacesupport.snowleopard (5.7.2)
Startup Items:
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
M-AudioFastTrack: Path: /Library/StartupItems/M-AudioFastTrack
PACESupport: Path: /Library/StartupItems/PACESupport
Problem System Launch Daemons:
[System] org.samba.winbindd.plist 3rd-Party support link
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] org.eyebeam.SelfControl.plist 3rd-Party support link
[System] PACESupport.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.hp.help.tocgenerator.plist 3rd-Party support link
[System] com.m-audio.mobilepremkii.helper.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
Flux
iTunesHelper
RescueTime
Internet Plug-ins:
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
Unity Web Player: Version: UnityPlayer version 3.5.2f2 - SDK 10.6 3rd-Party support link
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.6.6
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 10.1.1 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.7
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Growl 3rd-Party support link
M-AudioFastTrack 3rd-Party support link
M-Audio MobilePre 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU:
7% firefox
3% WindowServer
3% EtreCheck
2% hidd
0% coreservicesd
Top Processes by Memory:
397 MB firefox
106 MB mds
82 MB WindowServer
82 MB Mail
49 MB quicklookd
Virtual Memory Information:
1.04 GB Free RAM
1.04 GB Active RAM
1.03 GB Inactive RAM
907 MB Wired RAM
467 MB Page-ins
0 B Page-outsThe startup drive is failing, or there is some other internal hardware fault. The "etrecheck" output is irrelevant.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
My macbook pro has been running really slow out of nowhere
Problem description:
Macbook pro is all of a sudden being extremely slow. Anytime I click anywhere and even whenever I start typing something, the spinning rainbow beachball appears for like 15 seconds before anything happens. And even loading applications and internet webpages also takes a long time. After the problem arose, I upgraded to Yosemite thinking that it would resolve the problem, but it’s still hasn’t changed anything. Just a few months ago I changed my HDD to an SSD, and my mac was working perfectly fine until a few days ago. What’s going on and how can my mac work like normal again? Thanks.
Below is my EtreCheck report
EtreCheck version: 2.1.6 (109)
Report generated January 16, 2015 at 3:26:40 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 323
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:25:35
Disk Information: ℹ️
Samsung SSD 840 EVO 250GB disk0 : (250.06 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Samsung 840 EVO (disk1) / : 248.83 GB (232.13 GB free)
Core Storage: disk0s2 249.20 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.pharos.notify.plist [Support]
[running] com.pharos.popup.plist [Support]
Launch Daemons: ℹ️
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
Caffeine Application (/Applications/Caffeine.app)
Spotify Application (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Support]
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
7% mds
5% WindowServer
0% fontd
0% AppleSpell
0% opendirectoryd
Top Processes by Memory: ℹ️
155 MB loginwindow
146 MB Google Chrome
129 MB mds_stores
103 MB Spotify
94 MB Spotify Helper
Virtual Memory Information: ℹ️
5.20 GB Free RAM
1.99 GB Active RAM
446 MB Inactive RAM
945 MB Wired RAM
1.16 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 16, 2015, 03:02:08 PM Self test - passedCheck that your third-party software is compatible with Yosemite: See App Compatibility Table - RoaringApps.
If you have anti-malware software installed please uninstall it.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
MacbookPro started running really slow. Please help...
I tried some random cleanups with no results. Here is my EtreCheck report:
EtreCheck version: 1.9.15 (52)
Report generated September 7, 2014 at 8:36:05 PM MDT
Hardware Information: ?
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 1:27:15
Disk Information: ?
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (202.97 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Configuration files: ?
/etc/hosts - Count: 15
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) Support
Startup Items: ?
ProTec6: Path: /Library/StartupItems/ProTec6
Launch Daemons: ?
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[invalid] com.oracle.java.Java-Updater.plist
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[running] com.codecm.uploader.plist Support
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
OVSHelper: Version: 1.1 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 11.1.102.55 Support
AdobePDFViewerNPAPI: Version: 11.0.03 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.2 Support
Flash Player: Version: 11.1.102.55 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.03 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ?
AdBlock
DivXHTML5
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
Perian Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
7% firefox
2% WindowServer
0% Creative Cloud
0% fontd
0% System Events
Top Processes by Memory: ?
434 MB firefox
213 MB Finder
139 MB com.apple.IconServicesAgent
115 MB mds_stores
74 MB WindowServer
Virtual Memory Information: ?
4.56 GB Free RAM
1.49 GB Active RAM
896 MB Inactive RAM
1.07 GB Wired RAM
599 MB Page-ins
0 B Page-outs
Thank you!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Its not jailbroken, does anyone know whats wrong?
Did you try to reset the device by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
If this does not work, set it up as new device, explained here:
How to back up your data and set up as a new device -
I Have an ipad 2 and it has started running really slow. Is there something I can do to fix this
PPlease helpYou may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
Why has my iMac started running very slow?
In the last week my imac has started running extremely slow especially in safari. Nothing I know of has changed.why?
Besides what Allan is asking, make sure your drive isn't failing. Get the free demo of Smart Utiity to check its health.
http://www.volitans-software.com/smart_utility.php -
Over the past couple of weeks, I've noticed that my MB (10.5.2, 2.2/1GB/60GB) has been running really slow. For instance, I just tried to open a Finder window, and waited almost ten seconds for it to show up.
On average, I have six to seven apps open at a time (Safari, Mail, iCal, iTunes, Stickies, BOINC, Adium, etc.) but usually only half or so are doing anything (i.e. playing music, browsing the web, etc).
According to iStat and the Activity Monitor, I usually have ~250 MB of RAM either Inactive or Free, so I wouldn't think it would be a memory bottleneck.
Any thoughts? Anyone else ever have a similar experience?Maybe I should have looked up "BOINC" before I responded. I think that is the culprit. It is one of those things that won't be doing anything if you are looking at it. That is how it is designed to work. But if it thinks you are idle, it could be doing things and gobbling up your RAM. Then, when you start to do something, there could be quite a bit of effort to switch over. If you had more RAM, it wouldn't be a big deal.
Also, "inactive RAM" isn't free. It could be slowing your system due to swapping. Here is more info.
I would say either stop running BOINC or get more RAM or both. -
MacBook Pro suddenly runs really slow
I have a mid-2012 13" non-retina macbook pro that I bought September 22, 2013 and Friday it started running really slow, like it takes 5 minutes for it to startup and two minutes to log in. I opened up the console and I get all these errors and I've reset the SMC and PRAM and I've also restored from time capsule backup and still no use. What do I do? I don't care if I have to wipe my hard drive since all my stuff is backed up to iCloud and my Time Capsule. Here's what comes up in the console: 4/6/14 12:03:54.000 PM kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff801e1fd000
4/6/14 12:03:43.189 PM awacsd[63]: InnerStore GetWakeInfoForZone: no external port for 1980574548.members.btmm.icloud.com.
And they're a continuous string of errors. I've also performed a disk utility and nothing came up in red.Well you're helpful lol. I contacted them twice and they weren't of much help. I found out what was causing the issue. I had the program MacFanControl installed and when I went to uninstall it, I just dragged it to the trash can and emptied it. I went to the website where I got it and followed the instructions on how to remove it and now its running like it did before.
Maybe you are looking for
-
My parents bought it for me and I really don't have the money to buy a new one, andit's sort of my life. Is there a place in apple that I could send it or does anyone know of any shops e.g PC world that would fix it? Thanks x
-
I keep receiving this message when trying to use http://www.exodus-chats.org/DolTerias . it uses a java based chat system, and won't allow me to open the application. I've tried checking through my options menus, but I've found no reason as to why th
-
Digitize resolutions offline workflow without rendering
Hello Guys, one more question with offline resolutions: we are trying to digitize miniDV material over SDI or DigiBeta over SDI (blackmagic decklink and the other workstation is equiped with Kona LH) in OfflineRT. Whatever we do to store our material
-
Adding texture to a drawing in photoshop
I have a drawing that I did on Illustrator, that I want to change the texture on the drawing (in photoshop) to make it look like webbing (adding a weave pattern) I was told that I need to do this through the paintbrush, but I need a little more expla
-
Display Java documentation as Tooltip
Hi! I have a table displaying class attributes with their runtime value; I like to display as tooltip (when the mouse points at the attribute name) the java documentation for that attribute (if it exists). Has anybody tried this and can give me a hin