Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x  720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x  720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

Similar Messages

  • How can I open a document with applescript without the doc. window opening.

    How can I open a document with applescript without opening the document window and speak the text of the document?  I can get it to open the file but the doc window always opens up. 

    try
              set pathToMyFolderOnDesktop to ("Macintosh HD:Users:jodyconnor:Desktop:") & "Dsource:" as alias
              set rnd to (random number from 1 to 6)
              set rndFileName to (rnd as text) & ".scpt"
              set FullPath to pathToMyFolderOnDesktop & rndFileName as text
              set myScript to load script (FullPath as alias)
      run script myScript
    on error the error_message number the error_number
              display dialog "Error: " & the error_number & ". " & the error_message buttons {"OK"} default button 1
              return
    end try
    This code answered my question:  Hats off to Digimonk from stackoverflow and Darrick Herewe from stackoverflow.

  • How can I restore my iphone with icloud without the setup assistant?

    How can I restore my iphone with icloud without using the setup assistant? If this is not possible, how do open the setup assistant?

    Settings, general, reset, erase all contenet and settings, then you will restore from icloud.

  • How can I cancel my contract with Verizon without any fees because Verizon has failed to provide me with a workable phone for over 2 months despite many hours talking to tech support and several replacement phones, batteries, power cord, and sim card etc

    How can I contact a representative of Verizon to help me cancel my contract so I can switch carriers to get a phone that is reliable and a Co. that supports its products?  Verizon seems to have many blocking scripts or dead ends when trying tio contact someone  who can help the customer. How can I get around the blocks and get to someone who can directly answer my questions? I have one of those "hot" phones that were recently seen on the news, yet no one seems to be able to help me resolve the issue. I have no idea where this comment goes, or who reads it?
    Jim R

    The phone is your responsibility, if it's before the 1 year warranty you can get defects fixed by the Manufacturer  of the phone. If you want to leave pay your termination fee, or find a carrier who claims they will do it but don't really expect it to happen either.

  • How can i sync my iphone with itunes without erasing its data?

    my computer crashed and i had to reinstall my windows,now i want to sync my iphone with the new itunes(with the same apple id) but it says all data should be erased from the device....is there some way to sync the iphone without the data being erased?

    Hello, I had this problem A few times. But there isn't A way I know. Keep the music on your computer and add them back after is what I do.

  • HT1103 How can I burn a slideshow (with sound) to a DVD.  I have an imac desktop.

    Does anyone know how to burn a slideshow to a dvd disc.  It has pictures, video and music.  LLaBant

    To create a video DVD disk that can be played in set top DVD players and shown on a TV set you need a DVD video authoring application, like iDVD.  If you do not have iDVD on your Mac you'll have to purchse it by bying a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com.
    Why iLife 09 and not 11:
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    1 - once you have iDVD installed export the slideshow out of iPhoto at Size = Medium or Large:
    2 - 0pen iDVD, select your theme and drag the exported movie file into the menu window being careful to avoid any drop zones.
    3 - follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • How can I use Smart Print with IE10 without using the Bing bar.

    I have used Smart Print for a long time but after upgrading to Windows 8-64bit it seems that the only way to get it now is with the Bing Bar. I like windows but I have no use for Bing.

    Are you launching IE 10 from the Start screen, or from the desktop? Smart Print will only work if you launch IE 10 from the desktop.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can I synchronise my Iphone with Itune without losing all my contacts in my Iphone?

    I am working for someone who has more than one computer with Itune installed.
    I have been asked to synchronise an Iphone with one of them.
    Before doing, I would like to make sure that I will not lose all the contacts on the Iphone.
    Can anybody help me?
    Thank you!

    Remember that your iPhone will be able to sync with only one computer/iTunes Library. If your boss is insisting that you sync with one of his computers, I do hope he is at least paying your monthly cell bill, and preferably the initial cost of the phone itself.
    You can copy your own computer's iTunes Library to your boss's computer first. You will then get all your apps and media back during the first wipe-and-sync with the new computer. You can also copy the Address Book data from your computer to your boss's computer to preserve your Contacts data.
    An easier way to preserve your Contacts data is to sync it "over the air" using an email service. MobileMe, Google, and Yahoo are all easy to use for Contacts syncing. This is a very good method to use, since your Contacts are always "in the cloud" and available from anywhere, including from any computer with a web browser connected to the internet.
    Read the Contacts section in this document:
    http://support.apple.com/kb/ht1296

  • How can I import MP3 audio files into premiere pro cs5?

    Can any one help?
    How can I import MP3 audio files into premiere pro cs5?

    It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
    fifa 14 coins
    cheap fifa coins

  • How can I add photos to a video without interrupting the sound of the original video?

    In PE11, How can I add photos to a video without interrupting the sound of the original video?

    RLHeflin
    Thanks for getting your details posted. Good job.
    You further explained
    I am simply wanting to “overlay” a new visual element without disturbing the underlying audio.
    A classical way to do a Premiere Elements Overlay is to hold down the Ctrl key of the computer main keyboard and drag the new clip over the area of the one you want to replace on the Timeline. That should not do anything but replace one portion of the video on the Timeline. No change in duration video or audio track if you are dealing with video linked to audio.
    If you hold down the Alt key of the computer main keyboard, I am envising a scenario where you want to add to (not replace) some Timeline content.
    A just in case note, if you have video on Video 1 and 2 and the video in 2 does not have transparent areas in it, then all you will see is the Video 2 content. I believe that Hunt eluded to that concept as a possible technique for what you might be doing.
    Another just in case, if you have not seen the following Adobe documentation on arranging clips, you might be interested in the following link
    http://help.adobe.com/en_US/premiereelements/using/WS9B8F8208-EAE8-4b49-A79B-9479B46A8981. html
    Please update us on your progress when you get a chance.
    Thank you.
    ATR

  • I have many of those lost photos on my iPod.  How can I import those to my MacBook Pro without the iTunes synchronization kicking in and removing them?

    I lost rather a lot of photos on a corrupted external storage device.  I have many of those photos on my iPod.  How can I import those
    photos into my MacBook Pro without the iTunes synchronization function kicking in and effectively deleting those photos I want to
    import from that iPod?  Any assistance would be greatly appreciated as those photos now only reside on that iPod...

    The photos you synced to your iPod through iTunes are no longer in their full resolution, but instead are scaled down thumbnails of those photos.  So if you do manage to get them off your iPod, they will be quite small in size compared to the original ones you lost.
    In order to get them off of your iPod, you'll need the help of some sort of 3rd party software. Here is one option.
    http://www.macroplant.com/podtopc/
    B-rock

  • How can i import an mp3 to a Notification Ringtone under the "Sound Settings"?

    how can i import an mp3 to a Notification Ringtone under the "Sound Settings"? (i can do it to "Phone Ringtones" easy, but not Notifactions)

    This might work as well and will allow drag and drop of mp3 files. This is written as if the phone is connected to the computer.
    In the sd card, check if there is a folder called media. In the media folder verify or create a folder called audio. Within the audio folder create the following folders: alarms, notifications, and ringtones. These should be typed exactly as written. Copy or move the files into the folder you want them in. Disconnect the phone from the computer and let the remount the sd card. Now go into your notification or ringtones list. The files you put into the individual folders should automatically be there.
    I know that this works on the Eris and I got the method back when only the eris and droid 1 was available. I just can't remember exactly where I got it. Hopefully it also works for the Droid 1.
    @Ron
    Be nice please.

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • How can i import a music CD including all sounds from 5Hz to 30KHz?

    In order to be really lossless what configuration must be used?

    +"how can i import a music CD including all sounds from 5Hz to 30KHz?"+
    +"In order to be really lossless what configuration must be used?"+
    That is two different questions. If you want "lossless," which is defined as being sonically equivalent to the source CD, iTunes has 3 choices, as thicks noted.
    However, that does not provide frequency content as high as 30 kHz, since normal CD encoding is based on 44/16 PCM, and rolls off well before that. If you want all those frequencies, you have to use studio quality masters based on 192/24 encoding, which is far beyond iTunes's capabilities to handle.

  • I figured out how to snap a still photo of a movie clip, but where then does it go, and how can I import it into my iPhoto library?

    I was working in iMovie and discovered how to take a still photo of a movie clip.  Now I can't find that still photo!  Where did it go, and how can I import it to my iPhoto library?

    Just found out and it is simple.  When you find a frame in your video/movie of which you want a still photo or screen shot, just go to the frame and click on command, shift and the #3 in quick succession.  You will hear a "click" like a camera taking a photo.  The screen shot will then go to your desktop where you can drag it to iPhoto or an e-mail, or anywhere you like.  Also you can rename the screen shot by double clicking on the wording under the screen shot on your desk top. Whew!

Maybe you are looking for