Premiere CS5 import.MTS file with no sound.

when I import .MTS file into Premiere CS5, the sound can not be import~
how can I put the video sound into premiere

So ..is yours the 'Trial Version'?
Read Trial Limitations
https://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_pro

Similar Messages

Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
Thanks
Jeff Pulera
Safe Harbor Computers

Import .mts files with FCP 7?

What I want to know is can fcp import/transfer .mts files?
What I have been doing is using HandBrake, which converts the files to MP4 format and then convert them with MPEG StreamClip into .mov files. Everyone keeps telling me I'm doing too many steps and that I can "just do it with fcp." So far, I haven't been able to do that.
So, right now, I have the sd card with the file structure intact. The files are in AVCHD format, filmed with a Sony αNex-5 camera. (from sony: 1080i (1,920 x 1,080), 60i (interlaced) fields/second HD recording in AVCHD format).

I'm a film student and I've taken non-linear editing courses featuring FCP. I'm not an expert, but I do know the basics of file importing/exporting/transfering, etc. I have used a GL2 and have done Log and Capture, Log and Transfer, as well as read the Canon manual and installed the Canon plug in for FCP. Sony has no plug in or support for Mac owners (they refer all fcp questions to this website) for this camera.
I've tried selecting every file at every level and I get the same response.
File structure (plus there are .cpi files in the clipinf folder, etc.) goes:
CARD
PRIVATE, AVF_INFO, DCIM, MISC, MP_ROOT,
AVCHD, SONY
BDMV
STREAM, CLIPINF, INDEX.BDM, MOVIEOBJ.BDM, PLAYLIST
00001.MTS
The camera shoots AVCHD 1920x1080i. I've read that AVCHD Lite cannot record interlace, so I assume this is not AVCHD Lite. Am I wrong?

Can Premiere Pro Import mov files with Dolby E?

Hello,
I'm trying to import mov file containing Dolby E audio. The import operation failed.
Is there a solution to that ?
I just need to playback with the audio in pass through mode, to export in sdi signal as AES data.
Thanks for your help.

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Import .MTS files from Panasonic HDC SD700 ( AVCHD )

Does anyone know how to import .MTS files with FCP7?
I have already tried it via the log and transfer way, that does not work for our .MTS files, even when I do it the same way described on this website for importing AVCHD footage from SDHC cards via the log and transfer.
Is there maybe a codec missing? Adobe Premiere can use the .MTS files natively.
Thanks,
Petra

The SDHC card gives 3 folders: MISC, PRIVATE and DCIM when I keep the original order and don't change anything in the folder it says when I use log and transfer-> adding files ->
"MISC" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
All the properties shown after adding the files are 00:00:00:00 and I cannot play or preview the files in the log and transfer screen

Importing MTS files in Premiere Pro CS5 Trial

I just bought the Master Collection but I am getting the box sent to me via mail so while I am waiting I am using the trial version. Anyways I tried importing MTS files from my hard drive and I am getting the following error - "file has an unsupported compression type." Is this because of the trial version? Will this work as soon as I get my serial number and officially register the product? Thanks in advance.
- Zef

Is this because of the trial version?
Yep; no MPEG-based assets in the trial due to licensing restrictions.
Will this work as soon as I get my serial number and officially register the product?
Yep; be sure to uninstall the trial before you install the Master Collection, though. It's a good idea to run the CS5 Clean Script, too.

Adobe Premiere CC2014 AVCHD mts files no sound restricted Dolby encoder - solution?

I wanted to import mts files from a Sony NEX VG10 Video camera. They are AVCHD files = .mts. This works perfect in premiere Pro CS6. Also in my school in Bruges with Premiere Pro CC version 7 something. But with premiere Pro CC2014 (school in Brussels) I can import the files perfectly for video, but the clips do no have sound. Premiere gives a fault message: Dolby audio decode licensing restricted.
On the forum people say that for CC2014 Adobe doesn't pay licensing to Dolby and this is the reason. But this looks nonsense to me. Suddenly making a program useless?
Of course I can rewrap the files... But then I can as well stay with FCP and would be very much better of with AVID. So.... who can tell me and give a solution to this problem.
Thank you.
Joost.

I forgot to say... We use mac.

Can I import Sony .mts files with seperate audio layer into AE?

I can import .mts files from my Sony SR11 OK but the audio is in the same layer as the video content.
When I go to Edit/Edit in Adobe Audition and Audition opens Audition reports in details box, "Error:File not supported by any currently registered plug-ins."
The Audition Audio Plug-in Manager shows no available plug-ins.
Can I import the .mts file as seperate layers as one can with Premiere Pro? Alteratively perhaps, what plug-ins should I look for to add to Audition?

AE doesn't separate audio. You'll have to do it elsewhere, possibly in Premiere Pro or tools like ffmpeg/MPEGStreamclip. It's odd, though. since these components are the same in all the suite apps, a file that works in AE should just the same open in AU (without showing teh video in teh worst case). .mts is just MPEG2 or AVCHD in disguise, anyway, which the apps should open without a hitch - if it's not out of spec. I'd look into your camera settings, though. maybe you recorded to the wrong channels or an odd audio sampel rate and it's messing things up.
Mylenium

Importing .mts files not nested in original camera folder structure

The short version:
Is there any way to import .mts files already copied to a hard drive, without keeping the camera's folder structure intact, into Premiere Pro CS5.5?
The long version:
I recently purchased an iMac. For years I edited video on Windows using Sony Vegas and Vegas Home Studio. My camera, the Panasonic Lumix TS2, shoots AVCHD video. Vegas has no problem importing and editing AVCHD .mts files from a camera or a hard drive so it wasn't until I attempted to edit some video in Premiere Pro, recieved the "unsupported compressions type" error message and did some searching that I realized folder structure is so critial to working with AVCHD. From what I can tell, the files have to be in the PRIVATE>AVCHD>BDMV>STREAM>xxxxxxx.mts confirguration to be imported via the media browser.
Here is my situation, I have hundreds of .mts files in separate folders, bundled together with photos from the same day or event. I'm on an iMac i7, using an activated version of Premiere Pro CS5.5 from the Master Collection. Is there any way I can import and edit these files natively? And in the future, is there any way around transferring the entire folder structure everytime I want to copy the video files to my hard drive? I use Bridge to import photos and it will just pull the video files off the card and plop them in the same folder. Having to transfer the videos separately seems like a silly work around in our modern age. Thanks for any help you can provide.

Yo! I used to have this problem for about 1 year!! And fixed it about half a year ago and I have never been as happy when I fixed it!
Be sure that your sequence settings are set to the right settings: When you create a new sequence you should be promped with a window asking what settings you want. Open the "AVCHD" folder and there should be 3 folders; 1080p, 1080i, 720p. Pick the one that you filmed at, I film at 1080p, so I open that folder and then you pick the right setting to what you filmed your scene. I film at 24 fps so i pick AVCHD 1080p24 (non-anamorphic). Now there should be a new sequence with the right settings (don't use the same settings as I do unless you have filmed at the same frame rate and that it was filmed at 1080p or 1080i, there is a big difference between "p" and "i"). If you go in to the window in the bottom left corner there should be a tab on that box that says "Media Browser". Click it and the directory to your computer should be shown. If you have your SD card connected there should be something called SD card (or if you have renamed it then it is obvious what you should select). After selecting it there should be a folder called AVCHD and you open it up. This is where it gets tricky... because I don't know what camera you use and don't have any experience with your camera then you will have to go through all the folders that are within the AVCHD folder. They are not so many but in the folder where all the clips are hidden they should be called 00626.mts for example. Then you just select the clips you want to import and import them. This process can also be done by opening Finder (mac) or on PC just open up the same way and select the clips you want and drag them i to your project window
Then if you drag a clip in to the sequence, this is were you see if you did all the steps right (with the sequence settings) then the light above the clip should be yellow, meaning that the playback engine recognizes the format and can play it back without any compression Therefor giving you much better quality videos!
Hope this helps, I know the pain you are going through, don't want it to happen to anyone else

FAQ: How do I troubleshoot audio issues when importing .MTS files?

Hello. The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video. Thanks, Don.

Hi there
Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

I can't import MTS files in premier cc2014

Premiere Pro CC 2014 doesn't import .MTS files? Says unsupported compression type

Move folder to another place on the drive and rename.
See if that will help.
Ingest via the Media Browser.

Unable to import mts files

i just updated my premiere to the latest version (cc 2014) and when i try to import mts files it gives me an error message that the file compression type is not supported.
i have tried to rename the folder as well as deleting the media cache files, i even tried going back to the older version of premiere and now it wouldn't work either.
anyone has a solution?

Rename the folder again and manually empty the media cache database folder. (so that it is really empty).
Where are the mts files stored (what kind of drive).
See if that will help.

Importing MTS Files from Canon HF100

I am unable to import MTS files from my Canon HF100 SD card (or camera with card inserted) into iMovie 08. The files are grayed out. I have no problem importing standard definition files from the SD card. There are conflicting posting on this topic (some people appear to have no problems). Apple support tells me I need to get a conversion program. However, the Canon HF100 is listed as a compatible camcorder. I would appreciate any assistance. Thanks.
Jeremy

It seems like you shouldn't have to convert the files in case there is any loss in quality or file info. If you've only saved the .mts files to your hard drive you might try re-loading them onto the camera using the software that came with the HF100 (i forget was this is called and whether it even works on a Mac - i used a PC). The file structure will be reestablished and then the mac should be able to read it, whether the camera is plugged into the computer via usb, or if you plug the SD card into the usb port.
I haven't tried the whole sequence described above but I've used a variation of it to put movies back on the camera, and also to convert the file structure back onto an SD card that was read by iMovie and a Playstation 3.
In the future remember to download the entire file structure from the SD card if you want to save to a hard drive.
I'm about to install Final Cut Express 4 and work with my HF100 videos so I guess I'll find out soon enough how easily the HF100 files are imported with that.

Why does iMovie '09 not directly import MTS files?

I see lots of posts of people having problems with their HD movies. I have 16GB of movies on my Canon HF100 that I cannot import into iMovie because of some weird iMovie bug where it is looking at the entire file structure on the card. I can reformat the SD card and shoot a few quick movies and iMovie '09 recognizes the card and imports just fine. The million dollar question is why can't iMovie '09 import MTS files directly? What about for people with archived MTS files? To me something is missing here. Either iMovie '09 has a bug importing or there is some super critical folder structure it is looking for before it imports. This is obviously not an isolated issue. BTW, I do not want to and should not have to use a third party file converter. Every conversion means loss in quality. Can someone at Apple address our issues? Is there possible a fix coming?

I have been searching for an answer to this question and no one seemed to have an answer. There is however a very easy work around thanks to the poster RodrigoPoloDOTcom.
http://discussions.apple.com/message.jspa?messageID=10745889#10745889
Basically you can re-encode all of your MTS files very fast with FFMPEG and using the command ffmpeg -i myvideo.m2ts -acodec copy -vcodec copy myvideo.m4v
If you are on a Mac you can instal FFMPEG with RodrigoPoloDOTcom's method. Paste the following entries into the Terminal:
curl -O http://rodrigopolo.com/ffmpeg/binkit/mac/binkit-v1.1.tar.gz
tar xzvf binkit-v1.1.tar.gz
cd binkit-v1.1/
./install.sh
cd ..
rm -rf ./binkit-v1.1
rm binkit-v1.1.tar.gz
Then you can navigate to your directory that contains all of your MTS files and execute the following command from Terminal:
apply 'ffmpeg -i %1 -acodec copy -vcodec copy %1.m4v' *.MTS
I was then able to import my movies into iMovie '09 with ease. I do not understand why iMovie '09 cannot do something like this when trying to import MTS files directly.

How import mts file from sony nx5 in final cut pro

how import mts file from sony nx5 in final cut pro

LOG AND TRANSFER. I have the full workflow here:
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
Make sure you are running FCP 7.0.3. That version deals with files from the NX5 the best. If you are on a previous version, like FCP 6....you will need to use CLIPWRAP2 from Divergentmedia.com. As the specific AVCHD format the NX5 uses is something that FCP 6 cannot really deal with.
Gotta love new camera formats.

Premiere CS5 import.MTS file with no sound.

Similar Messages

Maybe you are looking for