Premiere cs5 mercury engine will it work without any graphic card?

HI there I have core 2quad 6600 processor of 2.4ghz, and intel classic series fb33 motherboard, with only onboard video ram shared with physical ram of 2gb.
I want to install cs5 on 64bit OS and upgrade total ram to 8 gb without buying any graphic cards(right now). Qn is will I be able to edit avchd videos? will the
mercury engine still be enabled? I know its kinda "no budget, want all qn" Right now I dont wanna buy a card as am plannin to buy new system later..
Thanks
Gigarigh

Yes, of course, you are correct, Harm. I was over-simplifying.
I Took the OP's "enabled" to really mean "accelerated", and in that sense, it will not work as without the necessary graphics card there will be no acceleration.
I can certainly support your third paragraph, having just moved from a four-year-old system with a quad 3 GHz processor, 8 GB of RAM and a hacked 460 GTX graphics card, to a Sandy Bridge E system with a 3930 CPU, 32 GB of RAM but the same graphics card and HDD set up (for the moment). Your oft stated "molasses in winter" describes my old system pretty well from my present viewpoint!
The old system coped with the fairly gentle HDV, provided I kept the number of assets down, but threw a hissy fit if I tried 1920 HD, even with the Matrox (I know, I know!) I-frame codec.
Gigarigh,
You would be better off upgrading along my path - motherboard and processor first, using as much as you can of your old system for now, as this allows much better scope for future upgrading.

Similar Messages

My board is not working with any graphic cards except mine(mx400)

Dear friends!
I have sent a message but noone understood!
My problem is simple.
My mainboard is i845 MSI 6528LE!
My graphic card is INCA MX 400 Ge force2!
My mainboard is working good with this graphic card.But it is not working with other cards!For instance Winfast MX440,Asus FX 5200,Ati 9100,Ati 9200SE...
Why!I tried lots of things.Bios update, i845 driver update...
Please is there anyone who understand tis problem in MSI?
Thanks!...
0t is not a power suply or voltage or driver problem okey!!!!

I understand that you are frustrated, but it will help us all to help you if you create a Signature with all the info, and specs of your PC...As this info will keep us from having to guess for example, What Operating system are you running? Windows, Linux?, if Windows what version?, What type and speed Memory are you using? What type of CPU, a P-4, a Celeron, what speed?.ect. What Voltage is the Mem. set to, Voltage of the CPU?...These are all things that we need to know..Otherwise if we do not have this info we have to guess....So please we want to help ..But you have to give us all the info we need ...Sean REILLY875

URGENT: Sorry, Expander will not work without the Stuffit Engine...

hallo,
I want to watch a show of myself on Time Warner Cable TODAY live ONLINE while being in Europe, so it is urgent:
sometimes when I try to install a software I get the following error message:
'Sorry, Expander will not work without the Stuffit Engine. Please reinstall the original installer.'
Just now I wanted to install 'Windows Media Player 9 for Mac OS X' and got that error message. Any suggestions?
THANKS YOU!
1 GHz PowerPC G4 (3.3) Mac OS X (10.4.7)

"Any suggestions? "
Obviously you need to reinstall Stuffit Expander. Download it from Stuffit.com.
Also, forget about Windows Media Player. It's out dated, and not even made anymore. Download the free Flip4Mac QuickTime plugin from Flip4Mac.com
Hope that was urgent enough...

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

Will Xserve work without a rack?

Before I get all these rants about how stupid this question is let me preface it with a short story:
The owner of my company wants a new server. He asked me which I thought was better: tower or rack mount. I said that the PowerMac doesn't have the service warranty we would expect from a server, and as a desktop, is not really designed to run 24/7 the same way Xserve is. So we configured a new Xserve and it is in the process of being made. He then asked me the question: "will it work without a rack?" Being honest, I said "It would power on, but it's not recommended to run that way because it can't cool properly and it's not physically secure."
Now he tells me we aren't ordering a rack for this $6000 server. Can you please list all the reasons this is NOT going to work, so I can go back to him with a huge rebuttal? It just doesn't seem logical to me to not spend a few hundred dollars to properly secure this very expensive piece of equipment, and I don't have any fight left in me to come up with all the answers on my own.
PowerBook G4 12" 1.5GHz Mac OS X (10.4.7) 5th Gen iPod Video, 1st Gen iPod Nano

He then asked me
the question: "will it work without a rack?" Being
honest, I said "It would power on, but it's not
recommended to run that way because it can't cool
properly and it's not physically secure."
Speaking from my limited experience (18 months) with our Xserve G5: The Xserve does not need top and bottom venting; it cools front to back. A risk, though, will be that it gets shoved back against a wall and thus has poor airflow out the back, and you don't realize until you have done it what a mess of cables comes out the back and why you need the cable management arm (as aggravating as it is when you first use one) to manage the cables.
The Xserve is heavy. It's difficult to walk away with one. The enclosure lock will still work without a rack, but it's not real security anyway, just protection against the drives being bumped out by accident. But an unracked Xserve will be prone to injury and falling off a table, etc. They are BIG and HEAVY. The Intel Xserve is even longer than the Xserve G5 (look at the dimensions).
If the concern is the expense, well, you can build your own rack rather cheaply. I suggest Starcase (http://www.starcase.com), which lets you build a rack of any dimensions - you will probably want at least a 3U or 4U rack for your Xserve - 1U for the Xserve, 1U for a UPS (APC has a nice 1U 1000W UPS and a same-size 750W UPS), 1U for a tape drive and autoloader (you will need to back up all that data), and you might need another few rack units of height. The nice thing about the Starcase rack solution is that, as your rack height needs expand, you can simply get the four corner posts of greater height and grow your rack. Starcase also has side panels, top panels, etc. For custom-height solutions (rather than their pre-bundled standard sizes), see:
http://www.starcase.com/customsteel_rackstore.htm
Check the Starcase prices so you can present your boss with a true picture of the cost. They are built like a tank. I STRONGLY advise that you put your Xserve in a rack; otherwise, it will be very difficult to service when the time comes - and you WILL need service, eventually.
However, note that the Xserve is NOISY. If the Xserve is going to be in an office environment, you will need an acoustical enclosure, such as the XRack Pro. See:
http://www.xrackpro.com/
Very nice, very quiet, and a bit pricy.
Hope this helps.
Russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

The pop-up will not work without locking up

Adobe Muse does not work with the Swedish version in Windows 7. The pop-up will not work without locking up.
I have tried by changing the screen resolutions but the problem continues. What to do?

When I try to delete a page in design mode freezes the program.
It is not possible to change tools in the toolbox.

My Ipod 4th gen will not work without the charger.

My ipod nano 4th gen will not work without the charger.

How much it costs depends on who you have replace the battery whether that be Apple or a 3rd party repair company. Here are Apple's prices.
http://www.apple.com/support/ipod/service/prices/
It would likely be much cheaper to have a 3rd party company do it instead. One company I have heard a lot of good things about is iResq. For others, do a simple Google search for "iPod battery repair" and you should get a plethora of results.
http://www.iresq.com/
I don't believe Radio Shack does offer that service. Sorry.
B-rock

How can i get my apple id to work without a credit card?

i try to get it to work without a credit card but it wont let me. it is not fair to me.....

If you have an account that previously had a credit card and you're now trying to remove it, see:
http://support.apple.com/kb/ts5366
If you are trying to set up an iTunes Store account without a credit card, presuming you only want the free apps take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

MyDAQ fails Self-Test and will not work with any software

I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip ‏341 KB

Hi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG ‏40 KB

IChat Video works without any manual port configuration

I'm posting this as a question and a true "discussion" with regards to iChat "video chat" operation with 2 users, both behind their own NAT router. I have seen several cases where iChat (ver3 and ver4) work just fine without any manual intervention. Of course, there are many other cases in these discussions where it seems a lot of complication and little positive result are part of the equation. Isn't iChat designed to work behind NAT routers ? Doesn't it use the SNATMAP server to get external (ie; public) IP and port number mappings ? If both users can login to the AIM server and initiate a Chat request, and contact the SNATMAP server, the next key requirement is to simply establish a point-to-point SIP session to the public IP/port of each endpoint.
It seems the first thing to check is that this is happening correctly. In other words, the iChat debug log for userA should show something similar to;
2008-01-29 18:59:21.739 iChat[2603] IPAndPortList: (
{ip = "x.y.z.w"; port = 63217; },
{ip = "a.b.c.d"; port = 16402; }
...where a.b.c.d represents the internal/private IP of a user (userB on Leopard iChat4 for example with 16402 representing all of the SIP, A/V, and A/V control ports) behind a NAT and x.y.z.w represents the external/public IP of userB. At least I think Leopard uses 16402 for the SIP. This shows that userA has the mapping for the SIP signaling port to send the SIP:invite to userB (ie; 63217).
There is also something like;
185912.819694 Sending SNATMAP heartbeat to 11FAF895:5678
185912.912199 SNATMAP heartbeat resulted in IP change (from: 0 to: mm.nn.kk.pp)
185912.912251 SNATMAP heartbeat resulted in port change (from: 0 to: 64999)
..where mm.nn.kk.pp represent the HEX values for the userA public IP address and the 64999 (in this example only) represents the SIP signaling port for userA
185921.738995 =========== OpenPorts!
185921.832238 Public mapping: m.n.k.p:64998
185921.923213 Public mapping: m.n.k.p:64991
185922.014215 Public mapping: m.n.k.p:65018
185922.104986 Public mapping: m.n.k.p:65098
...where m.n.k.p represents the public IP of userA (Tiger iChat3 in this case), and the 64xxx and 65xxx umbers represent the ports opened for A/V and A/V control. In other words, these are the mappings for the "typical" 16384, 16385, 16386, 16387 ports.
As long as both users have connectivity to the SNATMAP server, these "mappings" should proceed without problems, right ??
If both endpoints/users get these mappings, which appear to happen auto-magically between iChat and the SNATMAP server at "snatmap.mac.com:5678", iChat should move to the next phase which is to simply establish the point-to-point SIP call. Up to this point, I don't see why any port-mapping or for that matter, anything else needs to be done ?
Of course, AFTER this point, one does need to make sure no local computer "application" firewall is blocking 5190, 5060, 5678, 16384-16403 (Tiger) or 5190, 16384(or 16393?)-16402 (Leopard) .
If all is well to this point, and iChat actually sends a valid SIP:invite to the remote public SIP IP/port, with a valid SDP section, it's up to whether the endpoints can agree on the session parameters (ie; video codec, bitrate, frame-rate, etc..etc...)
Of course, there are many other things that could happen outside of iChat, like bad (or even good) installed software causing some weird problems, or running some application like virtualization or Internet Sharing that may have some "interop" issue...and maybe even a Service provider simply blocking the ports that the NAT has used (unlikely since they are probably different for every user and determined by each users NAT router)...but if you look at the iChat errorLogLevel7 debug output (preferably on both ends at the time of the call), you should be able to determine if iChat is sending a valid Invite...which is the prmary key in all of this.
Lastly, I have read about "symmetric" NAT routers which might actually pose a real problem even when using the SNATMAP server. This is because a symmetric NAT router will only allow traffic from the destination port that a source port was opened to...which in iChat's case is usualy the SNATMAP server. So it may not be possible to "open ports" via te SNATMAP server, but then get incoming SIP/video traffic from userB. In this case, then UPnP or NAT-PMP, or port-forwarding/triggering may help.
Just some thoughts for discussion.

Your totally right,
and from al the discussions here it seems that not every body knows that, and might be looking for the wrong answers. I wonder why Apple doesnot tell us how it is meant to work, and how to troubleshoot connections problems!
Ichat uses the SIP protocol and should work without any firewall/NAT configurations, for an explanation see http://en.wikipedia.org/wiki/SessionInitiationProtocol
I have seen it work out of the box for several installations (single iMac, OS X 10.5, behind one ADSL router). In one situation i had to switch of the SIP helper application in the router
My own home network has 2 macs however, and sometimes it works and sometimes not.
1) I found out that for local videochats i have to use the bonjour accounts, is that correct ? It should work with .MAC accounts too?
2) for external communications i found out it is best to to stick to one Mac. When I switch from one to the other, using the same account (after logging out first), it often doesnot work, although it should. Any idea how to troubleshoot this problem? (now I rember I have to check this SIP helper application first
3) when i setup a video chat to my mam who uses autoaccept, i am not able to take over the screen. Without autoaccept it works fine. So it looks like autoaccept won't allow you to share the screen.

Original Cisco GLC-GE-100FX gbics are not working in WS-C3560CG-8PC-S while Third-Party gbics work without any problems

Hi all,
i have a gbic problem with my WS-C3560CG-8PC-S.
My original 100FX gbics are not working
Mar 30 01:28:41.575: %PHY-4-SFP_NOT_SUPPORTED: The SFP in Gi0/10 is not supported
Mar 30 01:28:41.575: %PM-4-ERR_DISABLE: gbic-invalid error detected on Gi0/10, putting Gi0/10 in err-disable state
100FX Third-Party Gbics are working without any problems.
NAME: "GigabitEthernet0/9", DESCR: "100BaseFX-FE SFP"
PID: Unspecified , VID: , SN: AFFxxxxx
What can i do?
I tried different firmware versions (12.2 and 15.2(1)E3)
I also tried the "service unsupported-transceiver" command.
It still does not work with 8 Switches and 16 original gbics :(

GLC-GE-100FX and GLC-T is not supported as documented in the 3560C Data Sheet.
You could try contacting your Cisco SE/AM and request for a Product Enhancement Request (PER).

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why the imsg doesn't work without a sim card with iOS 7???

Why the imsg doesn't work without a sim card with iOS 7???

If it worked for you using iOS 6, then it appears iOS 7 has made some changes. Was it working before?

I have purchased my i phone 5 one month back, unfortunately I have got some hardware problem like some part has been broken from inside, but the phone works without any issue, Did anybody face this issue?

I have purchased my i phone 5 one month back, unfortunately I have got some hardware problem like some part has been broken from inside, but the phone works without any issue, Did anybody face this issue?

If you believe there is a hardware problem, call AppleCare or make an appointment at an Apple Store if there is one nearby.

Premiere cs5 mercury engine will it work without any graphic card?

Similar Messages

Maybe you are looking for