Premiere CS5 system - any ideas on this?
Firstly hello to the forum users as this is my 1st ever question!
I am about to purchase a new PC, i need to step up into the 64bit world. Basically I cannot afford exactly what I was planning so as a step towards the right kind of set up I have found this place on eBay and wanted to ask some of the forum users if they can spot any problems with it, I originally planned to get this pc with a GTX 580 card and the i7-980x chip, but simply cannot afford it at the moment! bugger....
Anyway, here is what my compromise will be in the link below...
eBay link: .http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=400208735460&ssPageName=STRK:MEWAX:IT
I will be using this machine for a lot of video editing of mainly AVCHD 1080p footage includng GreenScreen footage, also a fair bit of animations in After Effects and also multiple GreenScreen video sequences and these will be used via Dynamic Link directly in the Premiere timeline. I will also be creating some animated DVD menus in Encore, a lot of work in Lightroom 3.3 managing lots of 5D photos and footag too. Then a little work here and there in Cinema 4D or 3d Studio, purely for creating elements to use within After Effects.
Graphics Card-wise, I know this comes with a useless (for Premiere Pro) ATI card, so that is going to be swapped out for a GTX 460 (unless anyone else can advise me an alternative for similar kind of money)
I will be adding in another 3 HDDs to get this running as best I can for Premiere, and I also want to buy the Black Magic Intensity Shuttle to enable me have a real time HDMI output monitor, and also to skip the video cameras compression and I know that this means the Mother Board needs changing, but this I know but may help the system not having to deal with the AVCHD footage? Anyone had any good/bad experience with this kit? Any advice here would be appreciated!
Thanks for your time to anyone who can help, no matter how little
Bradley
I agree, Harm -- as long as the OP makes the promised substitutions and additions as soon as he receives the system. As the OP noted, a single hard drive and an HD 5450 are practically useless in CS5.x.
To the OP:
I recommend downloading and running the PPBM5 benchmark, available from the PPBM5 Web site. Although the Gigabyte GA-X58A-UD3R motherboard the Easy PC system uses allows overclocking, you don't need to overclock the CPU until you get the system working correctly at stock speeds. With the 24 GB of RAM and Windows 7 Pro 64-bit, and after you make the promised hardware upgrades, you should be getting a result in the 240-ish second range in total time at stock speeds. Much longer than that and you'll need to tweak the system further (most likely because the software configuration is incorrect or there are way too many Windows processes going on).
Similar Messages
-
The new maverick system does not allow me to watch Sky - Any ideas when this is going to be resolved?
Press the escape (esc) key to exit full-screen mode.
-
I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?
Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?
Hi,
Please give this a try: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
Thanks,
Rameez -
hi ERROR U41M1C212 for Update Elements 9 and PS CS5. Any Idea what it is? Thanks for Help.
If you look at the bottom/right of this screen you have a list of links in 'More information like this'.
Have a look at them. -
i just upgraded my software to OS X 10.9.2 (13C64) and i can no longer use my printer (epsun stylus sx235w). any ideas why this would happen?
Mavericks is the name of your operating system. It is otherwise known as OSX 10.9.
The previous versions were indeed "cat things".
The way you would know if you need to download new software from Epson is to go the Epson website and search for your printer there, look for downloads, and see if they have new software listed for 10.9.
You can revert your system back to what it was two weeks ago. This would be easier to do if you have a backup that you made prior to installing Mavericks (like with Time Machine). If you don't have a backup (sounds like you probably don't), you can look here for some directions about how to go back to the "Cat Thing" that you had prior to installing Mavericks: How to revert OS X back from Mavericks: Apple Support Communities
If all of this is too hard for you, you could take your Mac in to your Apple store and ask them to help you. -
my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.
Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian
-
The output sound was somehow muted and grayed so that I can't uncheck it. Any idea how this happened and how it can be undone?
Hi, and welcome to Apple Support Communities.
Which exact iBook model is it?
You can choose from this list:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
You could try resetting the PRAM and see if that helps. -
I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?
I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?
-
When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox openedtry
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?
I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.
-
Problem tranferring old iPhone 3GS (ios 6.1.6) to new iPhone 5S (ios 8.1.2) through iTunes on my iMac computer (OSX 10.5.8) . I have backed up the 3GS this way since purchase of 3GS. The computer does not seem to recognize the 5S is there -- no setup assist is appearing on screen. Any ideas welcome.
this may not be your problem my according to the tech specs on apple.com the 5s requires:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 8; Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 11.1 or later (free download -
Before i ran the software update i had to iphoto icons in the launch pad, both had exactlly the same content so i just ignored it for a wile till i needed to update my photos, which i was hoping to do after the update.
However when i restarted both iphoto icons had gone and iphoto seems to have been wiped off my mac completelly, I have got a back up of all my pic and videos so this is not a problem of recovering them.
i have then tryed to instal iphoto from the app store, resulting in there being a perminant downloading icon making no progress over the last two hours.
If any body has any idea why this happened and what i can do to provent it happening again as well as getting iphoto back the help wil be much apricated.In addition to Larry's questions what software update did you apply? Do you still have an iPhoto Library in your Pictures folder? If you do what happens if you double click on it?
OT -
When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?
See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
i am getting an "error -5000" message when I try to backup my iphone 4 to itunes. Any ideas what this means?
Take a look at this link, http://support.apple.com/kb/ts1424
Maybe you are looking for
-
I have a CS4 and would like to install Camera Raw 8.6. How do i do it?
I have a CS4 and would like to install Camera Raw 8.6. How do i do it? The reason being in LR5 when I want to edit the images in Photoshop Layers, the message comes that I need to install Camera Raw 8.6 for compatibility. Even After installing Camer
-
MOVED: A75MA-G55 and memory Problem
This topic has been moved to Overclockers & Undervolting & Modding Corner. https://forum-en.msi.com/index.php?topic=152324.0
-
So, Apple is making this special offer that when you buy a mac and a printer at the same time, you get up to $100 back via rebate. And I saw this printer that costs $99.95 (Epson Stylus Nx420). So, I'd like to know that if I buy mac + epson printer,
-
Importing a PDF comes out blank
When I import a PDF into a flowable form it comes out blank. It works if I import it static though. I did some editing on the form in photoshop, the old version (Before Editing) works fine. The edited version will not load. Thanks Rab
-
XPath expression test possibilities in Fault Policy file
Hi All, It would be a great help if someone can show me a way to implement the next case: I have the next scenario, in a fault policies file I have different actions to execute for the same fault andI have to choose what action will be executed check