Premiere CS6 and CC: any compatibility issues working back and forth between both versions?

Hello,
What are the compatibility issues with Premiere CS6 and CC versions?  Can the user go back and forth?  I run a computer lab at a college and we will be upgrading to CC but many students will still be using the older CS6 version of Premiere until we update all the computers....  Will students run into problems?
Thanks,
dmichael

My concern is going back and forth between the versions...  I read somewhere there are compatibility issues with Premiere....Can the user working in CC go back to premiere CS6? and vice versa?
Thanks,
dmichael

Similar Messages

  • Should I expect any compatibility issues by working partly under Windows and partly under MAC OS?

    Apologies if this point was already raised but could not find the answer.
    I am considering the creative cloud in an environment where the same files will be worked within windows and MAC environment.
    Should I expect any compatibility issues or difference with such a setup.
    thanks in advance.

    Hi JLCbac,
    Files do support cross platform workflow, however, there are certain limitations to it.
    Kindly refer the below mentioned links for more info.
    Link 1 : Adobe Premiere Pro Help | Cross-platform workflow
    Link 2 : Re: Mac-made PSD can't open on Windows
    Thanks,
    Atul Saini

  • I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

    I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

    Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

  • Are there any compatibility issues with Captivate and OS X Yosemite?

    Has anyone noted any compatibility issues with Captivate and Yosemite?

    I had the same issue. Updating resolved this as well.
    I tested with Captivate 7 and almost everything seemed to work fine. I tested with an existing project file containing TEB's, Motion recording, a third party drag 'n drop widget, and a playbar with a TOC. This all seemed to work fine both in preview mode as after publishing. I also tested with Captivate 6 although I didn't publish anything. Here, everything seemed to work fine as well. However this was only SWF.
    As jpm226 described for 8, previewing HTML5 doesn't seem to work with Captivate 6 and 7 either. Chrome gives a "This webpage is not available" notification. Publishing however, does seems to work.
    Fortunately, the client we work for that asks us to use Captivate 7, also asks for SWF output. So I'll continue to use Yosemite for now.

  • Is there any Compatibility issues between Yosemite 10.10.2 and Adobe Elements 12 editor 12.0 or adobe DNG converter 8.1 ?

    Is there any Compatibility issues between Yosemite 10.10.2 and Adobe Elements 12 editor 12.0 or adobe DNG converter 8.1

    A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

  • I am frequently unable to join the internet or it runs very slowly.  I have a Time Capsule in my LAN. Are there any compatibility issues with Time Capsules and any ISPs?

    I am frequently unable to join the internet or, if I can, it is exceptionally slow. The ISP says nothing is wrong ontheir end.  Are there any compatibility issues with any ISPs when using Time Capsule and/or iMacs?

    Tried this several times to no avail.  I believe it is the ISP causing the problem...Time Warner.

  • Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.

    Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.  I'm on Mavericks 10.9.5.

    one obstacle, quickly removed. thank you.
    nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
    i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

  • Are there any compatibility issues with Sonos and Airport extreme??

    are there any compatibility issues with Sonos and Airport extreme??

    Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
    On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
    In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
    These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
    In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

  • Seagate ST8000AS0002 8TB 5900RPM 128MB Cache SATA3 - for Backup Data Only. Are there any compatibility issues with an older  3,1 Apple Mac Pro 8-Core 2.8GHz (4-Core x 2) ?

    Finally mass storage drives are being released. The Seagate ST8000AS0002 8.0 TB 5900RPM has just been released in Australia and I was advised to check on any compatibility issues, being that my 3,1 Mac Pro is an old, but working fine machine.
    I have read there are possible issues with using HDs greater than 2TB with the MP 3,1 . But checking with OWC, they say the Seagate 4.0 TB Solid State Hybrid Drive is compatible for use with the MP 3,1.
    So can the hardware and operating system handle an 8.0 TB of this sort ?

    The problem is with formatting the large disk. The Mac can see and use them if formatted for a Mac
    Format large disks
    That bug appeared in 10.8.4, and has not yet been fixed.
    using a Disk Utility from any older Mac OS X, including the 10.6 DVD (if your Mac can boot from it) or any saved Installer DVD or thumb drive will work.
    Another work-around is to move that drive to an external enclosure and Erase it there (provided your enclosure is modern enough to deal with drives over 2.2TB.

  • Using premiere cs6 and cant see video in source or program monitor only can hear audio

    using premiere cs6 and cant see video in source or program monitor only can hear audio

    More information needed for someone to help... please click below and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Can I easily upgrade my 2.4 GHz Intel Core 2 Duo to the new quad intel i7? any compatibility issues?

    Can I easily upgrade my 2.4 GHz Intel Core 2 Duo to the new Quad intel i7 processor? any compatibility issues?

    Not only can it not be done easily... it can't be done at all.  For starters, the processor is soldered to the logic board and it is not replaceable.  However, even if the processor were removable, the new quad core i7 processor is not compatible with the chipset used in your current system.  The new processors use an entirely new chipset.  The new processors also have an integrated GPU on the processor.  Your current chipset wouldn't have any idea how to deal with that.  Basically... apart from the fact that you just can't remove the processor, there are a significant number of hardware incompatibilites between the new processors and the logic board in your current machine.

  • EVGA nForce 680i SLI / X-FI Xtreme Gamer Fatality...any compatibility issu

    Recently ordered a system with these components and was wondering if there were any compatibility issues. Seems like this card has a lot of problems...should have done more research...

    In all seriousness, return the card. Do it NOW because you still have the chance to. Don't wait until it's too late.
    Then after that, if you are curious why I say that, do some searches about other issues everyone is having and Creative not being very responsi've.
    Search (either here or use Google for external websites) for "ha20x2k.sys" and "BSOD" (or a combination of both). "Crash" and "BF242" or even other games such as WoW and CoH - just be (pun not intended) creative.
    Don't be like the others here (like myself), who own a very expensi've paper weight. Sure you can continue to use it for listening to music, but that's like buying a sports car and just being able to use the stereo.Message Edited by naddie on 04-2-200706:54 AM

  • I can't update premiere cs6 and Encore crash

    Hi, i have creative cloud and i have installed previous version of premiere pro for use Encore but i can't update premiere cs6 and encore crash when i edit new project.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • Hello - I have done  a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version  - thank you

    hello - I have done  a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version  - thank you

    >I have managed to download the footage onto Picture Motion Browser
    Isn't Picture Motion Browser available for Windows only?  If so, why are you posting in an Final Cut Express forum?  My apologies if I'm incorrect.
    -DH

  • Do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

    do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

    do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

Maybe you are looking for

  • WaaS Central Manager - device serial number report available?

    Hi folks, just wondering if anyone knows a quick/easy way to talk to the WAAS database to pull serial number information for all of my WAE's installed.  i have 35 devices scattered around 7 states and I'm hoping for an easy way to collect serial numb

  • Flash Player Crashes in FF 28

    Repeated messages that Adobe Flash Player 12.0.0r isn't working in Firefox 28 and it doesn't let me use the browser.

  • Is it possible to display the variable 'Sell Price 3:' from volume pricing?

    We use volume pricing on all of our products. I would like to be able to display 'Sell Price 3:' on its own so we can use that as a 'from' price. As it stands the system uses the sell price which is actually more expensive than the volume discount pr

  • Mail password issues

    Before, in Lion and previous version of OSX, I could leave my password "blank" in my email accounts under Mail preferences so that when I sign in I have to type in my password for my email account.  I do this for security purposes as other people use

  • Remove video, and keep audio track.

    Is it possible to delete video, yet keep the sound, in order to add voice over