Premiere CS6 Interlacing Problem

Hi,
I have some DV widescreen footage that I have captured via a Canon Xl1. I create a new sequence from the DV widescreen format and drop it onto the timeline. I have my Canon Xl1 hooked up to firewire feeding a CRT PAL monitor. The playback flikers on the CRT monitor. If I then reverse the fields the playback is smooth yet the timeline becomes red indicating the footage no longer adheres to the sequence preset. The sequence preset is Lower Field first. The footage is showing as Lower Field First in the Project Panel.
If I then create a DV sequence with a setting of Upper Field First and drop the same footage onto that timeline, Premiere states that the footage is incorrect for the sequence. Very strange, anybody help?

If you open up your media in the Source Monitor and play it back does it flicker? If it does right click the media file in your bin and go to Modify ---> Interpret Footage and go down to where it says Field Order and check if it says Lower Field First in Use Field Order from File. If it does check the Conform To check box and select the reverse field order from there, which would be Upper Field First if the above holds true. Now play back the same video file in the Source Monitor. Does it still flicker?
If it doesen't, select all your media files, right click Modify ---> Interpret Footage go to Field Order and check Conform To and select Upper Field First. This will change the field order for all your media files.
Now drag a video file from your bin into the New Item icon on the lower right of the project panel, this will create a sequence for you with the settings of your file and you should be good to go.
If it still flickered after changing the field order and viewing through the Source Monitor go to preferences and see that your video out settings are set right.
I can't remember if PAL DV 16:9 should actually be upper field first since it's been ages when I last worked with interlaced SD.
Hope this helps
-Oliver

Similar Messages

Music slightly out of sync when exporting in Premiere CS6, format problem?

Hi guys, i have a quick question.
I edited together a promo for a local band and everything is perfect in the sequence as far as being on point with the music at certain beats and such. However when I export it the music is slightly out of sync, which is bad when you edited everything specificly to the song. I am not using ANY audio from the footage but instead layed a music track over everything. I'm not sure what else to do, could it be a format problem? I am using h.264 (see below), but would AVI or anything else work better? any help is appreciated thank you!
I am exporting directly from inside Premiere CS6 using a custom H.264 preset. 24fps, VBR 2 pass encoding. Target 7MB, Max 11MB. (with render at maxium bit depth, and render at highest quaility selected.)
I put the audio settings to high, 320kbs AAC format.
I use a custom built PC with an i7-3770K, 32 GB RAM, and I exported to a 120GB SSD.
Any other info you need just ask.any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!
Also, any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!

Hi,
I dont think that you will really get a problem while exporting in any of the given formats. But i would really like to check if the audio layer is exactly same as of the video. for eg - if my audio is 00:05:30 and my video is 00:05:20 , we might face issue with the sync.
We can try to put more black video to make it a match with the audio and then try to export.
Where do you have the media files , on a internal drive like c: or desktop? In case not , try to move the media files to desktop and then try to export.
Also instead of exporting the files to your 120GB SSD , try to export it on the desktop.
Hope it helps.
Thanks

Premiere CS6 MXF problems?

Hi since i installed premiere CS6 i have a lot of problems
THE PC that i have is win 7 pro 64 bits SSD disk for systems and 2 HDD SAta of 2TB each one
Video card envidia GT650 , 8 GB Ram
first problem >> premiere don't start usually i have to press shift + left control in order enter to premiere
also on the timeline the video always freeze
sometimes proyects don't open, i have to create a new one and them import the proyect that didn't work
today i have problem with Error Compiling Movie: Unknown Error
i can't render now
i try to render in little part, but before it get 100% the render increase and decrease and never end to render??? for example 98.5% them 98.1% them 98.7% 98.9% 97.5% and the loop continue
i think could be problem due to MXF fileS?

Hi!! thanks por the quick reply
Yes, the mayority of time i have to acces premiere holding down Shitf+alt
also make a new sequence each time that i have problems fix all but today, i create several sequence but Error Compiling Movie: Unknown Error can't fix so i'm not able to render this proyect

Premiere CS6 install problem

I just attempted to install Premiere CS6 on a system that already has Premiere CS5 - it meets all minimum requirements. I also installed After Effects with no issues. The installer gave me 24 non-fatal errors - mostly some temp files it could not remove. The installer now indicates that Premiere CS6 is on my computer, but it isn't there. I do have some folders for Premiere CS6 Family and it shows up in my control panel under installed programs, but I am unable to find it in the start menu or even in the program folder (this is a Windows computer running Windows 7), 8 GB memory and a high-end GeForce card, Intel quad-4 processor. Can I uninstall using the control panel and attempt a reinstall?
Update - I uninstalled Premiere CS6 and tried again - still getting the following errors:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DF024, DF059,D ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s)
----------- Payload: Adobe Player for Embedding x64 3.3 3.3.0.0 {9254D539-549A-41DD-A7DA-251766F2B76F} -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\APE\3.3\adbeapecore.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
----------- Payload: DynamiclinkSupport 6.0.0.0 {DE88AA40-6766-43D3-A755-8FC374B3D2C3} -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6\boost_date_time.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1)
----------- Payload: Adobe SwitchBoard 2.0 2.0.0.0 {CFA46C39-C539-4BE9-9364-495003C714AD} -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\SwitchBoard\adobe_caps.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 13)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 13)
ERROR: DF059: ARKServiceControl::StartService failed to start service SwitchBoard. Error: 1053(Seq 1)
However, the Manager indicates these are optional components - still can't locate Premiere CS6 - it simply isn't on my system!

Palm-harbor please make sure you don't have any Adobe Creative Applications running when you are installing. Also the DW063 and DF024 errors can be indications of file permission issues. If you have closed all Adobe Creative applications but continue to receive the same errors then please follow the steps listed in Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html to adjust your file permissions.
Also you will want to review the install log in it's entirety to determine the locations where you are receiving the DF024/DW063 errors. Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret the installation log files.

Premiere CS6 Capture Problem

Hi,
I have a HD Sony Camera output HDSDI to a Blackmagic ATEM 1 switcher. From there I output to a Blackmagic UltraStudio Express via HDSDI. I capture in Premiere CS6. We capture about 1 1/2 - 2 hours of footage every session. A number of times, when I press stop on the capture window, the save box never comes up. I would wait up to half and hour sometimes and it doesn't come up at all. I'm forced to close the capture window and I have a dud file that's about 140gb.
Does anyone know why the save window wouldn't come up after I push stop? Premiere still works fine after I close the capture window. It's like the capture crashes but Premiere is fine.
Thanks for the help!
Clark

I ev been Using Premiere since ages .. Same setup works fine on my other machiene But I custom Made this and put very expensive Quadro6000 in it and now what ever setting I start it only Captures .mp3 formate ... last nite funny thing happened I Played That mp3 File on a Video Conveter's Player and it played all fune with Video and Sound ..
Premiere is creating this File but unable to read it makes me Cry .. I thing there is some Codec missing .. I am ZerO when it comes to Computers Hard and soft wares .. Plz see if you can hel me ..

Multiple Adobe Premiere CS6 workspace problems Win 7

Here's a screenshot of my workspace [img]http://i.imgur.com/jseNN6c.jpg[/img] to help to describe the problems I'm facing.
1. Why can't I get the top right pane to match the top left's aspect by default?
After madly mouse clicking around the top right pane image crosshairs come up and I've managed to manually adjust the image onto a black background, see this screenshot [img]http://i.imgur.com/m2CccdH.jpg[/img]
And after all this fuss I'm worried my output video quality will not be the crisp resolution of the left hand frame, but the much more blurry right hand pane.
2. I'm trying to insert keyframes with stuff like people's names.
Adobe help keeps on telling me to locate a 'wrench shaped' icon in the bottom timeline frame - I can't find one and continue following the keyframe instructions.
3. If I undock a panel, and say drag it across my extended desktop to my second screen - how do I re-dock it? Can see an undock command but not a re-dock?

Hi,
After looking at the screenshot of the issue you have, I can say that you have not selected the correct sequence settings.
After Import all the clips in Premiere Pro please right click on one of the clips and choose the option "New Sequence from Clip". It will create a new sequence for you with the correct settings and you will have full image on the program monitor as well.
Hope that helps.
Thank you,
Mohd Naseem

Yellow line premiere cs6 playbeck Problem

hello
I play a video in premiere
And the display is not smooth and i get a choppiest playback.
i use a footage from my sony ex3 (mp4) (and i mach the sequence to the footage).
on the time line there is a yellow line.
So far so good and we can say that the system can not handle the file.
but - i am using the quadro 4000 and the tesla c2047 THE maximus technology of nvidia compeny .
But here is the big question
I stop the QUDA in the project setting (video rendering and playbeck ) and use the mercury playbeck engine software only (red line on the time line) and
Magicly video displays smoothly.
If something has an idea I'd love to hear
moshe

hello Harm
first of all
thank you verey mech for your fast Reply
If I may ask a few more questions
I'd appreciate it if you I will spend a little of your time, so that I wont make an incorrect purchase (like I did earlier)
1. for the GTX 660 Ti you mean this one:http://www.bhphotovideo.com/c/product/970263-REG/evga_02g_p4_3665_kr_geforce_gtx_660_ti.ht ml ?
2. What do I do with the quadro 4000, Will he be able to work with GTX 650 together or I will have to Get rid of it
3. Can you explain more what you meant about improve my disk setup ?
Thanks so much for the help
I appreciate it very much
moshe

Problem to install pro premiere cs6, i have configuration 32 bits

problem to install pro premiere cs6, i have a configuration 32 bits

Hi alicia220912,
64 bit support is required to install Premier Pro CS6. You will not be able to install it on 32 bit machine as it does not meet the minimum system requirements.
Please check the system requirements at : http://www.adobe.com/in/products/premiere/tech-specs.html

XDCAM-EX problem with .MOV files on Premiere CS6

Hello!
I've been working in a video project on Premiere CS5 with video files .MOV from a JVC camera and from a Sony XDCAM EX. I've installed the Premiere CS6 TRIAL. The project has been converted: I get to watch and edit the .MOV files from the JVC Cam, BUT I can't load the media .MOV from XDCAM EX, It says the codec is missing or unavailable... I got the same problem with some .DV files working before on CS5...
I looked for the codec info and I found this one: MediaCoreQTCodecRulesCS6.xml
It shouldn't be working?
Why if all the files were working with Premiere CS5, They are not with Premiere CS6, being this one the latest version of the software? Is it due to be a trial version of the software?
I would really appreciate your help on this issue!
Have a good day!
Zoila

Officially you need FCP installed to work with XDCAM EX Movs. Are you on a mac or PC?
However, this is an update for quicktime on macs that gives you the XDCAM EX codec:
http://support.apple.com/kb/DL1396
Not sure if there's an equivalent for PCs.

Progressive to Interlaced: Give Premiere (CS6) Double-Framerate?

Given some available footage at say 50p, can Premiere make use of all those frames in the logical way to render "25fps interlaced" meaning 50 fields per second, even and odd, by taking alternating fields from alternating frames of the 50p?
I see from http://library.creativecow.net/articles/solorio_marco/interlacing_progressive_footage.php that After Effects does that exact thing.
But can Premiere CS6 do the same? Like if a 50p clip is placed on timeline of a "25fps-interlaced" Sequence?

I don't know the internal workings of how PP would make the conversion, whether it takes one field from each frame, or drops every other frame and takes both fields from the same frame. Certainly the former would make more sense.

Problem with Premiere CS6 download

Hello,
Premiere CS6 is showing as downloaded in my creative cloud apps, but is not on my computer. I can't uninstall it (because its not there) and reinstall and I can't download it again until I've uninstall it (but there's nothing to uninstall). I'm not sure how this has happened but can anyone help, I use CS6 for work.
Cheers.

Use Adobe Cleaner: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Has the clip marker problem been resolved in Premiere cs6?

Has the clip marker problem been resolved in Premiere CS6. As of early July, it was not! Navigating, synchronizing clips seems impossible.

Explain your problems with markers in this feature request form: http://www.adobe.com/go/wish
Sorry, that's all I can offer you.
TrueFriction wrote:
I'd just like to add my voice to the chorus here - namely that Marker functionality for CS6 is extremely lacking, and has made my workflow for various tasks much longer and more tedious.
In my case I'm trying to match professional footage of a concert with audience-submitted cell phone footage. The pro footage can't be synced with the non-pro footage via Pluraleyes because the cell phone audio is way too high to be analyzed properly. Hence I need to manually sync, which I can't do efficiently because I can't put clip markers on the pro footage once it's synced in pluraleyes and sent back into Premiere, because it only exists in a sequence.
I have no idea why Adobe would remove a function used daily by its editors, one that was simple and reliable, for no reason.
And what's puzzling is that there's been not even an acknowledgement of the issue from anyone at Adobe for 8 months.
This doesn't make any sense. Usually customer service from Adobe is much better than this. Why no action on this one issue?
BTW, if you want to add Clip Markers to clips in the Timeline, you can set a keyboard shortcut for that.

Problems installing Premiere CS6 - OpenGL error

Hello,
I'm having trouble setting up Premiere CS6 and would really appreaciate any help or advice!
I have just built a workstation to run CS6, however I have run into problems whereby CS6 will crash within the first few minutes of use. I'm not entirely sure what triggers it but just simple use like scrubbing or importing media will cause the crash. The error message I get is
'The NVIDIA Open GL driver detected a problem with the display driver and is unable to continue. ERROR CODE 3'
I have installed the latest updates for windows, CS6 and the graphics card but the problem still continues.
The video card is a Ge-Force GTX 580
Hope someone out there can help!
Thanks,
John

I was having the exact same issue (Vista, but different NVIDIA graphics card, and CS5), and I was able to fix it by adding a registry value.
Here the solution that worked for me:
1) open your vista registry editor (Start -> Run -> type "REGEDIT" w/o quotes)
2) go to the key : HKey_Local_Machine\System\CurrentControlSet\Control\GraphicsDrivers\
3) right click on the "GraphicsDrivers" key
4) Add DWORD "TdrDelay" w/o quotes
5) Set value of TdrDelay to 8
Restart Computer
Here's a link to the other forum where the solution was posted. Turnes out it has nothing to do with the drivers at all. It's a Windows thing. Another guy found that the problem was the TDR time limit (a value in one of the registry for the graphics card), which either does not exist (my case), or is not set high enough to render Premiere graphics properly.
http://www.sevenforums.com/crashes-debugging/51028-help-me-configure-registry-correctly-so lve-tdr-issue.html

Premiere CS6 Clip Marker problem

Hi everyone,
I work with a director based 200km away from me. So we need to exchange our work via mail.
When I mail her a project containing masterclips with clip markers she can't see them at all.
When I use merged clips this happens: when she selects the clip in the browser the markers show up,
but when she loads it in the source monitor, they disappear completely. E.g. when she selects
the clip in the browser again, they don't show up again. They are lost completely.
What is the problem? How can we exchange our clip markers?
We work with Premiere CS6(Mac).
Thanks in advance.

Clip Markers are stored with the media file, not the project file. This allows multiple Adobe programs to read the same markers. You'll have to exchange the media as well as the project file.

Problem on download premiere cs6

helo... I am download adobe application manager because i wont to download adobe premiere cs6, when the download was finish. I received an error: The application was unable to start correctly (oxc000007b). Click OK to close the application/
i check the system requirements,
i receive the error after I open the Adobe Application Manager and download premiere then I open the premiere after the download was completed. and I
receive the error
i dont no what to do.. Thanks in advance

A common cause of a Memory Address issue, is that some process, or program has either mis-reported its used memory addresses, or has told the OS that it has released them, when it has not.
Are you on a PC?
If so, at Start>Run, type MSCONFIG. Then, look in your Services and Startup Tabs, to see just what is loading at bootup. Post a screencap of both Tabs, and someone might be able to see processes, or programs, that are totally unnecessary, and can be the cause.
It might be helpful to see this article, on what info (especially your system) is necessary for others to help you: http://forums.adobe.com/thread/961741?tstart=0
Good luck,
Hunt

Premiere CS6 Interlacing Problem

Similar Messages

Maybe you are looking for