Premiere CS6 MXF problems?

Hi since i installed premiere CS6 i have a lot of problems
THE PC that i have is win 7 pro 64 bits SSD disk for systems and 2 HDD SAta of 2TB each one
Video card envidia GT650 , 8 GB Ram
first problem >> premiere don't start usually i have to press shift + left control in order enter to premiere
also on the timeline the video always freeze
sometimes proyects don't open, i have to create a new one and them import the proyect that didn't work
today i have problem with Error Compiling Movie: Unknown Error
i can't render now
i try to render in little part, but before it get 100% the render increase and decrease and never end to render??? for example 98.5% them 98.1% them 98.7% 98.9% 97.5% and the loop continue
i think could be problem due to MXF fileS?

Hi!! thanks por the quick reply
Yes, the mayority of time i have to acces premiere holding down Shitf+alt
also make a new sequence each time that i have problems fix all but today, i create several sequence but Error Compiling Movie: Unknown Error can't fix so i'm not able to render this proyect

Similar Messages

Music slightly out of sync when exporting in Premiere CS6, format problem?

Hi guys, i have a quick question.
I edited together a promo for a local band and everything is perfect in the sequence as far as being on point with the music at certain beats and such. However when I export it the music is slightly out of sync, which is bad when you edited everything specificly to the song. I am not using ANY audio from the footage but instead layed a music track over everything. I'm not sure what else to do, could it be a format problem? I am using h.264 (see below), but would AVI or anything else work better? any help is appreciated thank you!
I am exporting directly from inside Premiere CS6 using a custom H.264 preset. 24fps, VBR 2 pass encoding. Target 7MB, Max 11MB. (with render at maxium bit depth, and render at highest quaility selected.)
I put the audio settings to high, 320kbs AAC format.
I use a custom built PC with an i7-3770K, 32 GB RAM, and I exported to a 120GB SSD.
Any other info you need just ask.any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!
Also, any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!

Hi,
I dont think that you will really get a problem while exporting in any of the given formats. But i would really like to check if the audio layer is exactly same as of the video. for eg - if my audio is 00:05:30 and my video is 00:05:20 , we might face issue with the sync.
We can try to put more black video to make it a match with the audio and then try to export.
Where do you have the media files , on a internal drive like c: or desktop? In case not , try to move the media files to desktop and then try to export.
Also instead of exporting the files to your 120GB SSD , try to export it on the desktop.
Hope it helps.
Thanks

Premiere CS6 install problem

I just attempted to install Premiere CS6 on a system that already has Premiere CS5 - it meets all minimum requirements. I also installed After Effects with no issues. The installer gave me 24 non-fatal errors - mostly some temp files it could not remove. The installer now indicates that Premiere CS6 is on my computer, but it isn't there. I do have some folders for Premiere CS6 Family and it shows up in my control panel under installed programs, but I am unable to find it in the start menu or even in the program folder (this is a Windows computer running Windows 7), 8 GB memory and a high-end GeForce card, Intel quad-4 processor. Can I uninstall using the control panel and attempt a reinstall?
Update - I uninstalled Premiere CS6 and tried again - still getting the following errors:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DF024, DF059,D ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s)
----------- Payload: Adobe Player for Embedding x64 3.3 3.3.0.0 {9254D539-549A-41DD-A7DA-251766F2B76F} -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\APE\3.3\adbeapecore.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
----------- Payload: DynamiclinkSupport 6.0.0.0 {DE88AA40-6766-43D3-A755-8FC374B3D2C3} -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6\boost_date_time.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1)
----------- Payload: Adobe SwitchBoard 2.0 2.0.0.0 {CFA46C39-C539-4BE9-9364-495003C714AD} -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\SwitchBoard\adobe_caps.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 13)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 13)
ERROR: DF059: ARKServiceControl::StartService failed to start service SwitchBoard. Error: 1053(Seq 1)
However, the Manager indicates these are optional components - still can't locate Premiere CS6 - it simply isn't on my system!

Palm-harbor please make sure you don't have any Adobe Creative Applications running when you are installing. Also the DW063 and DF024 errors can be indications of file permission issues. If you have closed all Adobe Creative applications but continue to receive the same errors then please follow the steps listed in Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html to adjust your file permissions.
Also you will want to review the install log in it's entirety to determine the locations where you are receiving the DF024/DW063 errors. Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret the installation log files.

Premiere CS6 Capture Problem

Hi,
I have a HD Sony Camera output HDSDI to a Blackmagic ATEM 1 switcher. From there I output to a Blackmagic UltraStudio Express via HDSDI. I capture in Premiere CS6. We capture about 1 1/2 - 2 hours of footage every session. A number of times, when I press stop on the capture window, the save box never comes up. I would wait up to half and hour sometimes and it doesn't come up at all. I'm forced to close the capture window and I have a dud file that's about 140gb.
Does anyone know why the save window wouldn't come up after I push stop? Premiere still works fine after I close the capture window. It's like the capture crashes but Premiere is fine.
Thanks for the help!
Clark

I ev been Using Premiere since ages .. Same setup works fine on my other machiene But I custom Made this and put very expensive Quadro6000 in it and now what ever setting I start it only Captures .mp3 formate ... last nite funny thing happened I Played That mp3 File on a Video Conveter's Player and it played all fune with Video and Sound ..
Premiere is creating this File but unable to read it makes me Cry .. I thing there is some Codec missing .. I am ZerO when it comes to Computers Hard and soft wares .. Plz see if you can hel me ..

Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

Hey Volks,
when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
im very thankful for any idea...

Hi Dast Media,
Have you resolve the multi channel export?
I have the same problem...(the export it's ok but i hear only the first two tracks)
i need to export a MXF file with 8 tracks, 6 stereo and 2 mono.
Thank you for help!

Multiple Adobe Premiere CS6 workspace problems Win 7

Here's a screenshot of my workspace [img]http://i.imgur.com/jseNN6c.jpg[/img] to help to describe the problems I'm facing.
1. Why can't I get the top right pane to match the top left's aspect by default?
After madly mouse clicking around the top right pane image crosshairs come up and I've managed to manually adjust the image onto a black background, see this screenshot [img]http://i.imgur.com/m2CccdH.jpg[/img]
And after all this fuss I'm worried my output video quality will not be the crisp resolution of the left hand frame, but the much more blurry right hand pane.
2. I'm trying to insert keyframes with stuff like people's names.
Adobe help keeps on telling me to locate a 'wrench shaped' icon in the bottom timeline frame - I can't find one and continue following the keyframe instructions.
3. If I undock a panel, and say drag it across my extended desktop to my second screen - how do I re-dock it? Can see an undock command but not a re-dock?

Hi,
After looking at the screenshot of the issue you have, I can say that you have not selected the correct sequence settings.
After Import all the clips in Premiere Pro please right click on one of the clips and choose the option "New Sequence from Clip". It will create a new sequence for you with the correct settings and you will have full image on the program monitor as well.
Hope that helps.
Thank you,
Mohd Naseem

Premiere CS6 Interlacing Problem

Hi,
I have some DV widescreen footage that I have captured via a Canon Xl1. I create a new sequence from the DV widescreen format and drop it onto the timeline. I have my Canon Xl1 hooked up to firewire feeding a CRT PAL monitor. The playback flikers on the CRT monitor. If I then reverse the fields the playback is smooth yet the timeline becomes red indicating the footage no longer adheres to the sequence preset. The sequence preset is Lower Field first. The footage is showing as Lower Field First in the Project Panel.
If I then create a DV sequence with a setting of Upper Field First and drop the same footage onto that timeline, Premiere states that the footage is incorrect for the sequence. Very strange, anybody help?

If you open up your media in the Source Monitor and play it back does it flicker? If it does right click the media file in your bin and go to Modify ---> Interpret Footage and go down to where it says Field Order and check if it says Lower Field First in Use Field Order from File. If it does check the Conform To check box and select the reverse field order from there, which would be Upper Field First if the above holds true. Now play back the same video file in the Source Monitor. Does it still flicker?
If it doesen't, select all your media files, right click Modify ---> Interpret Footage go to Field Order and check Conform To and select Upper Field First. This will change the field order for all your media files.
Now drag a video file from your bin into the New Item icon on the lower right of the project panel, this will create a sequence for you with the settings of your file and you should be good to go.
If it still flickered after changing the field order and viewing through the Source Monitor go to preferences and see that your video out settings are set right.
I can't remember if PAL DV 16:9 should actually be upper field first since it's been ages when I last worked with interlaced SD.
Hope this helps
-Oliver

Yellow line premiere cs6 playbeck Problem

hello
I play a video in premiere
And the display is not smooth and i get a choppiest playback.
i use a footage from my sony ex3 (mp4) (and i mach the sequence to the footage).
on the time line there is a yellow line.
So far so good and we can say that the system can not handle the file.
but - i am using the quadro 4000 and the tesla c2047 THE maximus technology of nvidia compeny .
But here is the big question
I stop the QUDA in the project setting (video rendering and playbeck ) and use the mercury playbeck engine software only (red line on the time line) and
Magicly video displays smoothly.
If something has an idea I'd love to hear
moshe

hello Harm
first of all
thank you verey mech for your fast Reply
If I may ask a few more questions
I'd appreciate it if you I will spend a little of your time, so that I wont make an incorrect purchase (like I did earlier)
1. for the GTX 660 Ti you mean this one:http://www.bhphotovideo.com/c/product/970263-REG/evga_02g_p4_3665_kr_geforce_gtx_660_ti.ht ml ?
2. What do I do with the quadro 4000, Will he be able to work with GTX 650 together or I will have to Get rid of it
3. Can you explain more what you meant about improve my disk setup ?
Thanks so much for the help
I appreciate it very much
moshe

Adobe Premiere CS6 'Create new Trimmed Project' Crash with .MXF files

Yesterday I started to back up all our students work, and found that the "Create New Trimmed Project" no longer works in CS6 with .MFX files.
Adobe Premiere CS6.0.3, crashes when I try to "Create New Trimmed Project" under "Project Manager"
This only happens when there are .MXF files in the Sequence.
As we use Panasonic P2 cameras at this university, this is a problem, as this is the format that they shoot in.
As a test I have made a Project with only one .MXF file placed on the sequence, and it crashes.
This happens on my Macs and Windows machines with Adobe Premiere CS6 .
Adobe Premiere CS5.5 works fine, and does not crash.
Unfortunately I cant save a CS6 project as a CS5.5
If you don't have any .MXF files to test this,
You can make your own .MXF files by exporting any video file as "MXF OP1a" or "P2 Movie" Format, (the Preset setting is irrelevant - any preset will cause it)
P.S.
Using "Collect files and Copy to new Location" under "Project Manager" works fine, but does not reduce project size as much.

I also discovered this behavior last summer. Unfortunately the best (lame) answer I could find was that "Some formats, such as Long GOP based media files, cannot trim media, or add handles." Source: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7c72a .html
That's not very specific, but in my case at least (and it sounds like in your case, too) .MXF may be another file type that cannot be trimmed. If I remember correctly, the answers I got from others was that they were able to export fine. My machine (and maybe yours) has an issue that nobody else seems to have encountered. So none of the prescribed remedies allowed me to move forward in this regard.
After much searching, asking and several suggestions from various Premiere communities, I gave up and moved on.
Use Remove Unused and then Collect Files and Copy to New Location. At least that can help you if you have a lot of clips. In my case, it didn't help much, because my very short clips were edited from very long takes, so as Premiere sees it, not much was "unused".
Be aware that "Project Manager does not copy and collect After Effects compositions that are dynamically linked to an Adobe Premiere Pro project. Project Manager does save the Dynamic Link clip in the trimmed project as an offline clip, however."
Wish I could offer you more.

MXF Files won't play in Adobe Premiere CS6

I had a music video shot on Wednesday, the cinematographer downloaded the files from the memory card onto an external hard drive.. Checked the files, they were fine, handed it off to me. Upon trying to open the MXF files in Adobe Premiere CS6, it gives me an error code of "preview in source monitor failure" "the importer reported a generic error". I've tried downloading codec and all sorts of things, and nothing is working. I also tried converting the files to MOV (i paid $30 for a converter) but the converters aren't playing back the audio, (i tried 4 different converters)… I thought it was some type of error in the files, but I checked with the cinematographer, and he even played back his MXF copy of the clips for me and they have the audio in.. I'm getting really frustrated because I HAVE to have the audio in order to sync up the lip syncing with the audio track. The cinematographer said the MXF file is an MPEG2.
Can anyone shed some light on this issue? I had wanted to have the video edited and released by next weekend.

If I double click on the word holiday, it just shows the file folders. In the file folders the mxf files still don't open.

Not able to open canon xf 305 mxf in premiere cs6 but opening in cs5....need help....plsss

am not able to open canon xf 305 mxf in premiere cs6 but opening in cs5. I almost completed my project in cs6 and got this 3 gb footage just now.....help me please

Are you using the Media Browser for importing?
Import assets from file-based sources with Media Browser
http://helpx.adobe.com/content/help/en/premiere-pro/using/importing-assets-tapeless-format s.html#import_assets_from_file_based_sources_with_media_browser

Problem to install pro premiere cs6, i have configuration 32 bits

problem to install pro premiere cs6, i have a configuration 32 bits

Hi alicia220912,
64 bit support is required to install Premier Pro CS6. You will not be able to install it on 32 bit machine as it does not meet the minimum system requirements.
Please check the system requirements at : http://www.adobe.com/in/products/premiere/tech-specs.html

XDCAM-EX problem with .MOV files on Premiere CS6

Hello!
I've been working in a video project on Premiere CS5 with video files .MOV from a JVC camera and from a Sony XDCAM EX. I've installed the Premiere CS6 TRIAL. The project has been converted: I get to watch and edit the .MOV files from the JVC Cam, BUT I can't load the media .MOV from XDCAM EX, It says the codec is missing or unavailable... I got the same problem with some .DV files working before on CS5...
I looked for the codec info and I found this one: MediaCoreQTCodecRulesCS6.xml
It shouldn't be working?
Why if all the files were working with Premiere CS5, They are not with Premiere CS6, being this one the latest version of the software? Is it due to be a trial version of the software?
I would really appreciate your help on this issue!
Have a good day!
Zoila

Officially you need FCP installed to work with XDCAM EX Movs. Are you on a mac or PC?
However, this is an update for quicktime on macs that gives you the XDCAM EX codec:
http://support.apple.com/kb/DL1396
Not sure if there's an equivalent for PCs.

MXF files won't import into Adobe Premiere CS6

I can't get mxf files to open in Adobe Premiere CS6. I'm working on the newest Mac Book Pro- OS X Yosemite 10.10.1. I tried importing the files through the media browser but I can't open them that way either. I see the mxf video icon but when I try to open it I get this error message -"the importer reported a generic error." I ran all the updates for adobe and apple, but still these files don't open. Help please.

If I double click on the word holiday, it just shows the file folders. In the file folders the mxf files still don't open.

Problem with Premiere CS6 download

Hello,
Premiere CS6 is showing as downloaded in my creative cloud apps, but is not on my computer. I can't uninstall it (because its not there) and reinstall and I can't download it again until I've uninstall it (but there's nothing to uninstall). I'm not sure how this has happened but can anyone help, I use CS6 for work.
Cheers.

Use Adobe Cleaner: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Premiere CS6 MXF problems?

Similar Messages

Maybe you are looking for