Premiere CS6 suddenly not supporting .VOB files

Hey guys...
Been working on a reel on Premiere Pro CS6, wherin most of the footage comes straight from ripped DVD footage. Was working FINE for weeks, could drag and drop the VOB files and preview/edit them in premiere NO problem...
However, one day I noticed that the vast majority of my footage had gone offline. I tried to link the media back up, but to my suprise, whenever I try to link media or drag and drop new VOB files into the Project Panel, I get this message:
Error Message
     File format not supported.
Premiere suddenly no longer accepts, previews or lets me cut VOB files. I have no idea what went wrong...I vaguely recall accidentally disconnecting my harddrive while the project was open one time, and that seemed to be around the time the problem started. But I'm not sure, and even further still I'm not sure that an event like this would cause such a drastic change in the program. It's like the codec got erased or something.
I've tried uninstalling Premiere completely and re-installing again, probably 4 times now but to no avail. Today I caved in and wiped CS6 Master Collection COMPLETELY from my computer, even going so far as to erase any remaining folders w/ the word 'Adobe' on it, and re-installed everything fresh. Unfortunately, same result. When I open the project, all of the VOB files on the timeline are still dead and it still wont let me drag new VOB media into the Project Panel. I have no idea what is causing this.
The closest thing I found to someone else having this problem is here: http://forums.adobe.com/message/4648006
It seems his problem suddenly--an inexplicably fixed itself. Discouraging...
I read somewhere else of someone's VOB files not working, and someone recommended using Encore to rip the DVD's and it should work. I used MacTheRipper, but those files were working GREAT in the beginning, so I don't see why now suddenly they would shut off like that. Im not against trying encore, but I've already returned some of the DVD's to the guy who shot the footage, and it will be a pain to get them all back and re-burn them in encore.
Can anyone think of a solution for this? I would worship you for eternity, even build a statue in  my closet and feed it every night.
-Raptor

My sequence pre-sets are the same exact as this image:
(stole this image from this thread: http://forums.adobe.com/message/4508635)
Does this look like some presets are missing, and could this be the cause of my problem?

Similar Messages

  • CS4 Premiere is not recognizing .vob files as supported

    How do I get and what do I do to get CS4 Premiere to import a .vob file? ...it says it is not supported, but I know that it is.  Need I do a wipe and re-install?  I re-installed (over top) with no better success. ([email protected])

    Not all vob files are created the same
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

    In the PPro CS 5.5 Help file  under, "Recording audio", it says:
    "Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
    "Premiere Pro does not support audio-only capture for some formats, such as HDV."
    I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
    The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
    My DV setting is PCM audio, which I think is a better quality format, right?
    Would there be any noticeable difference?
    Thanks.

    Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

  • Premiere CS6 will not close

    Premiere CS6 will not shut down except by using task manager. This is a new problem. Is there something I may have accidentally deleted or changed, and is there a way to restore this function other than be reinstalling the whole program?

    Hi Joe,
    Thanks so much for taking an interest!
    The program is only a couple months old. I am running the same version on 5 computers, and the others all close just fine. This one closed fine too until I cleared out the media cache files which, to my surprise, I discovered buried in the c drive and pushing my c drive into the red over-full zone. i don't see how anything I deleted in the media cache folder could have caused this, but the problem started at the same time.

  • I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

    I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

    Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
    You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

  • Photoshop CS6 will not open raw files even after I downloaded a DNG converter help please!

    Photoshop CS6 will not open raw files even after I downloaded a DNG converter help please!

    We are pleased to announce the Adobe Camera Raw 8.7 RC is now live on Labs! See the links below.
    Technology pages:
    CC - http://labs.adobe.com/technologies/cameraraw8-7-cc/
    CS6 - http://labs.adobe.com/technologies/cameraraw8-7/
    Download pages:
    CC - http://labs.adobe.com/downloads/cameraraw8-7-cc.html
    CS6 - http://labs.adobe.com/downloads/cameraraw8-7.html

  • Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

    How to fix this problem
    "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

    When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
    The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
    I believe your problem will be something like that.

  • Nokia E75 does not support sis files

    I've been trying to upgrade the Ovi maps on my E75, because navigation has kept me saying that I need to renew the license. I went to Nokia web site and found out that I need to upgrade Ovi maps in order to get the free navigation. I have a 202.12.01 firmware and I installed it once again when I had unsuccessfully tried to upgrade Ovi maps. I have Ovi maps v3.01 09wk44b01 (MW OpenGL LM MN) and Map version 0.1.24.114 (OpenBitLM 6.22.5). I've deleted all old maps and started to download new ones successfully over Nokia Ovi Suite. I've downloaded Nokia Ovi Suite and followed the instructions for downloading and installing the newest version of Ovi maps application (I suppose it must be newer than the one I have on now, because navigation still wants me to buy license, I guess it must be 3.03 or higher). I've tried it several times from the scratch, just to make sure I did it right. Of course I've also chosen the right E75 phone from the drop down menu and I downloaded the file nokia_maps_3.01_09wk44_b01_s60_3.2_lm_rom.sis. I double-clicked it and everything seems to be right, but when action on the phone should be required the installation guide says "Nokia E75 does not support sis files". From the sis file name I can only now see that I have this version already installed.
    Does this mean I can not use navigation for free on E75?
    Can anybody help me ASAP, because I need the navigation evey day very badly?

    I'v followed the directions of chanchan05 "Just uninstall the maps app, delete the folder and file I mentioned, then reboot your phone. Open the maps app, and it should recreate the qf file and cities folder in a version compatible to 3.03." on /t5/Maps-Navigation-and-GPS/Wasn-t-it-supposed-to-be-quot-Navigation-on-your-Nokia-Free/m-p/668305#M...
    Afterwards I installed the sis file you pointed me to and it worked. The maps on the phone were deleted, so I downloaded new ones over Nokia Ovi Suite and tried the navigation. Unfortunately it stills demands buying the licence for the navigation.
    I guess this is because the recommended sis file is v3.01 and not v3.03? Is that right?
    Any other solution?

  • Since Flash CS6 Is not supported for OSX 10.8, can cloud members have Flash CS5?

    Since Flash CS6 Is not supported for OSX 10.8, can cloud members have Flash CS5?
    I see that Flash CS6 is not supported (http://helpx.adobe.com/flash/kb/mountain-lion-support-flash-professional.html ) . My coworkers and I are not able to see some fonts and the colorpickers are not working properly as mentioned at the URL.
    Can you make the previous version of Flash available for download and use with cloud membership just for this OS X 10.8 issue.
    It'd be more of a hassle for us to revert back to an older OS then to just get an extra older version of Flash on our system.
    Thanks ahead,
    -Line

    flash looks like the only adobe victim: http://www.adobe.com/products/creativesuite/faq.html#lion-os

  • InDesign may not support this file format message?

    What do I do when I get a Adobe InDesign may not support this file format, a plug-in that supports this file format may be missing message?

    Do you understand the difference between embedded (all of the image data is stored within the file) and linked (what happens when you use File > Place.... where a pointer to the file stored in the file along with a screen preview)? You must deliberately embed images -- there's no way to do it automatically. Pasted graphics are also stored internally.
    As to why it no longer works? Probably a write error while saving, especially if this is saved on a network drive. Writing 9 gb takes some time, if the file was really that big and isn't cross-linked to something else.
    To keep ID file sizes down always Place images and graphics rather than pasting, and do a periodic Save As to remove old change data that will become useless file bloat when you close the file. I tend to add a version suffix when doing the Save As at any major change point, rather than overwriting the original, as it gives me an automatic backup chain and a way to go back to a previous version if I need to move in a different direction.
    Do you have a backup?

  • How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

    How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

    Shouldn't the CC version be able to open any file created in an older version on InDesign?
    Yes, it ought to.
    If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
    The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

  • After effects cs6 will not import swf files...

    after effects cs6 will not import swf files...keeps saying it's unsupported. why would this be? what do i need to change?

    What SWF file? What source? How was it generated? SWF generated by Flex/ Flash Server may contain constructs that are incompatible and SWFs that render all their elements dynamically using Flash drawing primitives and use lots of ActionScript may also not work...
    Mylenium

  • Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file

    Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
    How do I fix this?

    That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
    Regards.

  • IMAQ ClipboardToImage IMAQ Vision does not support the file type you specified.

    Hi.
    I have been trying out the inventeering INVENTvisionIMAQexample.vi. But i always encoutered
    an error in the INVENTvisionVFWcopy.vi of "IMAQ ClipboardToImage IMAQ Vision
    does not support the file type you specified." And the video window does not
    appear full size with real-time capture image. Does anyone encountered this problem as well? Please enlightened me. Thank you.

    What error it is throwing ? if you could attach the vi then it will be easy to find out the problem

Maybe you are looking for