Premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?

premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?

Hi, Ken -
Since you have a new install of OSX, you may be missing Stuffit Expander, needed to expand downloads encrypted/archived in a Stuffit format. That problem confronted me with a new machine running OSX 10.6; a download and install of Stuffit Expander fixed it.
You can download Stuffit Expander from this webpage -
http://www.stuffit.com/mac-expander-download.html
Note - be sure to get the version that matches your OSX version.

Similar Messages

  • My PC has itunes in downloads but will not open or run

    I have a windows oper sys, Vista. I am trying to download Itunes. It shows in my download menu, but will not open or run. Any ideas how to fix?

    Hi, rvrguy. 
    You may find this article helpful when troubleshooting the issue you experiencing.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    Jason H.

  • ITunes downloads but will not open.

    I have downloaded the latest version of iTunes with QuickTime but it will not open up on my computer. I had QuickTime before, and that works fine, I can use that program normally. But my iTunes just doesn't open. When I click on it, the hourglass appears for a few seconds then nothing happens. I have tried the suggested problem solvers that are already on the apple site, but they haven't fixed my problem. I was wondering if there is anything else I could do?

    I helped a friend today with his new iPod. He had not updated since I installed version 6. When the installation of QuickTime/iTunes 7 was done, I rebooted the computer. I ran into the same issue as you each time I tried to launch iTunes. The screen would flash once, the hourglass cursor would appear for a few seconds, then nothing. Then I realized I was using an old shortcut from the Windows Start menu. Oops. Once I found the newly installed iTunes application and double-clicked on it, iTunes launched and we were good to go. Created a new iTunes account, redeemed the gift card I gave him, imported some CDs and sync'd the new iPod so he was happy. I went home happy knowing that he is going to be an iTunes addict just like me.

  • Premiere Elements 11 application will not open!!

    I just bought the combo PSE11 and PE11 and installed them both.  PSE11 works great but PE11 will not open at all.  I tried several uninstalls and installs, disabling windows essentials, defender, all spyware on my machine and everytime get the same result.  PE11 appears to install fine but when you go to open application there is no response.  I am using a Dell xps with intel i7 12 gig RAM running windows 7.  Any help?

    Welcome to the forum.
    John T. has mentioned the #1 cause of PrE not launching - the video driver.
    His questions are very important, and would be where I would start.
    To restate:
    What is the video card in your computer, both make and model?
    What is the version of the installed video driver?
    Is that the latest one? Note: with many computers from major mfgrs., such as Dell, HP, Lenovo, etc., the computer company will re-wrap the latest drivers from nVidia, or AMD/ATI, so the user needs to go to the computer site, and get/check the latest available driver.
    PrE must interface more intensely with the video driver, than does PSE, so it is common for PSE to run fine, but PrE to hang on an obsolete video driver. Even simple OS updates can render a video driver obsolete, and that is why video card mfgrs. will issue updates almost monthly. One little caveat here - there have been some noted issues with a few of the more recent AMD/ATI video drivers, the Catalyst drivers, and in some cases, users have had to roll-back their Catalyst drivers, to get things to work.
    Good luck,
    Hunt

  • Updated Nvidia display driver now my premiere elements 7.5 will not open.

    I have loaded the update for NVIDIA graphic card (Display Driver 257.21) and PE 7.5 will not open.  I have been using the programs with no problems except the usual crashes, and never could burn to disc.  The Photoshop will load OK.  Any suggestions?  Cindy

    >not having the ability to burn to disc
    Things and Software to AVOID when authoring/burning a DVD
    Read all links/sub-links to create a "best" burned disc
    Start --> http://forums.adobe.com/thread/608660?tstart=0
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus a Microsoft note http://support.microsoft.com/kb/314060
    And another note http://support.microsoft.com/kb/982116

  • Premiere Elements 9.0 will not open

    In August 2011 I purchased Adobe Premiere Elements 9.0 with a new Dell PC using Windows 7 64-bit. Since then I have used Premiere Elements many times for video editing without problems. The last time I used it was about 3 months ago. This week I tried to use Premiere Elements, but was unable to load it. The software would start to load up to the point of displaying the full screen with task bar, but without showing the individual “panes”, at which point it appeared to freeze. If I then tried to use the drop down menus (File/New/Project or Files/Open Project) an error message would pop up saying “Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project.” after which the program would shut down. I have tried unistalling and reinstalling Premiere Elements, but it has not solved the problem. Any ideas how to fix it?

    DavidBrum
    If the Premiere Elements 9.0/9.0.1 problem set in after the installs of any one of the programs installed, then you should rule that factor in or out for each systematically. Each would be a prime candidate for troubleshooting exploration.
    But, before you do that, let us try deleting the Premiere Elements 9.0/9.0.1 settings file. In Windows 7, 8, or 8.1 64 bit, it can be found in the path
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements Folder
    9.0 Folder
    and in the 9.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not correct the problem, then deleted the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists.
    IMPORTANT
    a. Make sure you are working with Folder Option Show Hidden Files, Folders, and Drives active so you can see the complete path.
    b. Do not detour or get lured into a Premiere Elements 9.0 Folder instead of the Premiere Elements Folder/then 9.0 Folder.
    Please let us know the outcome.
    Thank you.
    ATR

  • Version 3.6.8 is downloaded but will not open unless i restart my comp, i take this action but gives ame reason ad nauseum, also cannot delete it for same reason given.

    I have downloaded ver. [3.6.8] which is on my desktop. when I click on it it says to reboot to start this programme which I have done but it comes up with the same thing ad nauseum. It will not allow me to delete this programme citing the same reason .. ie., reboot
    == This happened ==
    Every time Firefox opened
    == I downloaded the new version and it will not execute. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; FunWebProducts; GTB6.3; .NET CLR 2.0.50727; InfoPath.1; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

    I have downloaded ver. [3.6.8] which is on my desktop. when I click on it it says to reboot to start this programme which I have done but it comes up with the same thing ad nauseum. It will not allow me to delete this programme citing the same reason .. ie., reboot
    == This happened ==
    Every time Firefox opened
    == I downloaded the new version and it will not execute. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; FunWebProducts; GTB6.3; .NET CLR 2.0.50727; InfoPath.1; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

  • HT3281 on ipad ,itunes movies download but will not open

    can't get downloaded itune movies to open.any tips?

    I have three computers that are practicably clones of each other and the new itunes update failed on two of them but one worrked fine. Here is fix that worked for me. This fix was suggested by another member but I cannot recall or find his post. My system is WinXP sp3 with all the latest patches.
    1. Download AirPort Utility 5.5.1 for Windows http://support.apple.com/downloads/
    2. Open task Manager and stop the mdnsresponder process. The corrupted mdnsresponder will be using 50% of your cpu.
    3. Open control panel / add remove programs. Find the bonjour app and click on it.
    4. Note the corrupted version of bonjour 2.0.0.34 by clicking on the support link.
    5. Uninstall bonjour
    6. Restart Windows.
    7. Install the AirPort Utility. This will install a good working version of mdnsresponder. Restart windows again.
    8. Upon restart you will see a new the airport icon in your task tray. You can also find mdnsresponder.exe running under process in task manger with little or no cpu usage. Your bonjour app under add remove panel will now be version 1.0.106

  • Itunes downloaded but will not open

    i have just downloaded itunes and when the download was complete i tried to open the software and nothing happened, i have never had a virus or anything on my computer so i am just comfused, how do i get it to open?

    hi stubbs!
    let's start off with the three usual suspects with an "error-message-free" itunes launch failure:
    if you don't see anything but a two-second-hourglass AND you've got Norton Internet Security 2005 on that PC
    ... let's start you off with the trusty Lorraine M technique:
    Lorraine M: NIS/itunes problem rectified
    (other symptoms people sometimes see with the NIS 2005 one include looooong slooooow PC shutdown times, a ccApp.exe end program dialog box during the shutdowns, and a end program dialog box where the name of the program is apparently a long string of non-printing or random Asian characters ...)
    if you don't see anything but a two-second-hourglass but you DON'T have NIS 2005 on that PC
    ... quickly check to see if you've got an unstable itunes configuration file:
    iTunes for Windows doesn't open after upgrading
    if you see a brief flash of the itunes license screen when you try to launch itunes AND you see similar behavior when you try to open your QuickTime
    ... your PC is probably infested by Qoologic adware. the free trial version of the EWIDO malware removal software has been cleaning that up for most folks:
    http://www.ewido.net/en/
    if no joy with any of those possibilities, we'll try checking on some of the rarer possibilities. (actually the configuration file thing is pretty rare too, but we've got a troubleshooting document on it so i throw it out there anyway early on in proceedings.)
    if, on the other hand, you're getting an error message when you try to launch itunes, post back to let us know what it says. the treatments for those are generally different from the treatments for the error-message-free itunes launch failures.
    love, b

  • Adobe Premiere Elements 4.0 will not open

    I have been working with 4.0 for several years now and have really enjoyed it. I have been working on several large projects at the same time. Yesterday the program started to appear to be opening but only to close to a blank screen. I have tried reinstalling the program but nothing seems to help. Can anybody help me because this is over a years worth of work within that program.

    Have you tried this?
    http://forums.adobe.com/thread/542377?tstart=30
    Also try launching the program while holding down the Ctrl+Al+Shift keys on the left side of your keyboard.
    If that doesn't work, please tell us more about your hardware, operating system, etc.

  • Purchased photoshop elements 11, worked after downloading but will not open now.

    I purchased photoshop elements 11and it worked after the intial download, however when I click on the icon now nothing happens.

    What OS you are on?
    If it is Windows then please ensure there is no PhotoshopElements process running in the background.
    Launch Task Manager > Processes tab and stop if there is any process running for Photoshop Elements.
    Restart the application again.

  • Itunes is downloaded, but will not open

    Itunes and quicktime was successfully installed on my computer and while quicktime is running, itunes is not. I've tried everything; installing and uninstalling, but to no avail. I have no idea what to do anymore. I have windows xp service pack 2, an ipod nano, windows firewall....yada yada.If anyone had this problem and had it solved, please help me out.

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Elements 12 (Editor) will not open?

    I have Adobe Photoshop Elements 12 installed on my Windows 7 computer.
    I am no longer able to open the Editor portion of the program. The Organizer seems to be working but every time I try to switch to the Editor, I get the following error message.
    "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close program.
    Thanking you in advance for any help regarding the above problem.

    boogboog2
    Please review and consider and do not be put off my the Premiere Elements in the title.
    See mention of my experiences with getting Photoshop Elements 12 to finally work.
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    Thanks.
    ATR

  • HT201272 A lot of my songs, once put on the iCloud, will not download to my iPod.  They are on my iTunes, already downloaded, but will not appear in my library on my iPod.  Before I started using iCloud, all music in my iTunes library was on my iPod.

    A lot of my songs, once put on the iCloud, will not download to my iPod.  They are in my iTunes library, already downloaded, but will not appear in my library on my iPod.  There is no common thread for the origin of the songs--many were ripped from CD's, others purchased in the iTunes store.  Before I started using iCloud, all music in my iTunes library was on my iPod without any issues.

    - Are you saying that they are not listed in your Purchased section?
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    - Are they listed in your Puchases history when you log into your account on your computer?
    - Are they still available now for purchase? If not then you are out of luck
    If they are still available and listed in your Puchase History then contact iTunes
    http://www.apple.com/support/itunes/

  • Adobe premier elements 11 downloaded but will not install

    adobe premier elements 11 downloaded but will not install?

    Hunt
    What you just wrote may have revealed the Photoshop Elements Premiere Elements integration consideration. If you have Premiere Elements 11, you need Photoshop Elements 11 for the integration between the programs to produce the DVD version of the Photoshop Elements Slideshow.
    All along I was picturing Meyerswalter already in Premiere Elements 11/Publish+Share/Disc/DVD and being told to install Premiere Elements to get the burn to disc accomplished.
    But, if Meyerswalter is using Premiere Elements 11 and a non integrated version of Photoshop Elements for this matter, that could very well fit.
    So, Meyeswalter, so that we can dispel those thoughts
    a. What versions of Photoshop Elements are you using with Premiere Elements 11? And, are you in the Photoshop Elements Slideslide Show Editor using the Output of Burn to Disc DVD or Edit with Premiere Elements Editor and getting the load software message somewhere along the line?
    b. To prove this point, if you have not already, what happens if you take Photoshop Elements out of the equation. Import some media into Premiere Elements 11 and try to burn to disc from there Publish+Share/Disc/DVD?
    If that is the core of the issue, I will post a list of Photoshop Elements Premiere Elements integrated combos as a guideline for you.
    If this is the core of the issue, you could always keep the non Photoshop Elements 11 version that you have, output the slideshow to a wmv file sized for DVD and then import that into Premiere Elements 11 via its Add Media. More on that later if necessary since right now I am speculating on an explanation for what you are encountering.
    Thanks.
    ATR

Maybe you are looking for

  • Installation of Dreamweaver CC 2014 - Problem with Adobe Application Manager

    Hi I have recently installed the Adobe Dreamweaver CC2014 as a trial, and I received this message: Adobe Application Manager, necesario para iniciar la versión de prueba, falta o está dañado. Descargue Adobe Application Manager de nuevo de http://www

  • Retrieving Hierarchical Position Information

    I was wondering if it was possible to retrieve hierarchical position information with BI Beans. So for example, let's say I have only one tile on the column edge (let's say it has three values). I now want information about a 2nd value (i.e. slice 1)

  • Transport for ESS / MSS

    Hi, We have installed ECC 6.0 and we are tring to install WAS Java 7.0 and EP 7.0 ( NW 04s SR1 ). We also wanted to go for ESS / MSS version which is compatible with NW 04 SR1 .We have Dev/ QA / PROd environments . My questions are 1) Once we install

  • Mdls + grep + output

    Hi Folks, I have a large directory of images whose dimensions and filename I need to output to a text file. Using the following from the command line, I can get the results of one of the fields: #mdls filename.jpg | grep kMDItemPixelHeight > ~/Deskto

  • Internal order field Suppress

    Dear Experts, Please guide me how to suppress G/L account field in MB1A tansaction code,  I have created one new movement type with copy of 201 and 202 in T.code OMJJ for movement type 903 i have deleted gl account field KONTO even though field is di