Premiere Elements 10 has stopped recording narrative.

I have used Premiere Elements 10 to make a number of home videos on my 2013 Dell XPS 8500.  Never had a problem.  This time I am unable to record/insert Narrative into the Narrative Track.  The program recognizes the mic (which I have always used).  I check the "enable" box.  The Record Voice Narrative  box recognizes the mic and the volume meter flashes indicating it is picking up sound....but when I hit the red record button and commence to narrate....nothing shows in the Narration track and nothing is recorded in the Media.  Is there a fix?   I can add a soundtrack and the Audio from the clips work as they should.  I can see nothing amis there.  

Clearwater1950
I will think about this in the morning.
Please check to determine if any of the following applies to your situation at any time.
http://www.atr935.blogspot.com/2013/07/pe-narration-recording-stops-after-30.html
The narration is not going to turn up on the Narration track until you have hit Stop in the Narration dialog. Is that what you are
saying? At one point it sounded like you were expecting to see the narration clip in the Narration track while recording it was still in
progress.
What happens if you start a new project and create narration with the Narration Tool? Still the same narration issue?
More later.
ATR

Similar Messages

  • Adobe Premiere Elements has stopped working

    I have had APE 9 for about a year and recently bought a new computer.  I re-downloaded it, using the original serial numbers and everything was fine.  I loaded up a video successfully and everything seemed fine.  I have a Sony HDR CX115 camera and use APE to edit the videos.  The new computer runs Windows 7, the older one was XP.  During the editing process, which normally takes a couple of hours, the machine crashed about 30 times and the message above was displayed.  I resorted to saving everying minute or so, and eventually got the job done.  Anyone any ideas?  Have I got one of the settings wrong.  Assume there's no problem about re-using the original software?
    Thank you
    Mel Jones
    Birds with Bottle

    Very little data for anyone to help... need DETAILS about your hardware and the files you are using
    Most of these links are for Premiere Pro, but the IDEAS show the kind of information
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    More information needed for someone to help http://forums.adobe.com/thread/416679
    Some is general about your computer and OS, some is specific to video editing
    Build a Configuration file http://www.piriform.com/speccy
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
    Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

  • Premiere elements has encountered an error.  [..\..\Src\Core\Preferences.cpp-338] (while launching video editor)

    Getting an error while launching Video Editor (either New project or Existing project). However i can launch "Organizer" with no issue.
    windows 7 -64bit Core i7
    Premiere elements has encountered an error.  [..\..\Src\Core\Preferences.cpp-338]
    then
    -Runtime Error!  Program C:\Program Files|A...  This application has requested the Runtime to terminate it in an unusual way.  Please contact the applications suport team for more information.
    then
    -Adobe Premiere Elements 11 has stopped working  A problem caused the program to stop working correctly, please close the program.

    School Board
    Thanks for the replies.
    I was almost sure the uninstall, ccleaner, reinstall would resolve the problem. But, onward....
    Are you working from a school or company network or from an individual home computer?
    From your ID and some comments, I think school network.
    I suspect the issue is more than resetting the preferences, but let us give that a try to rule it out (or in).
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    11.0
    and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then
    you delete the whole 11.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working
    with Folder Option Show Hidden Files, Folders, and Drives enabled so that you can see the complete path cited.
    Is the Owner designation in the above path named correctly?
    Also, look at disabling the SLCache Folder if you find one as described for 12 in the following
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    To be continued....
    ATR

  • Adobe Premiere Elements 13 stops working trying to add media via videos from camera

    When I try to add media selecting videos from camera or flip, Adobe Premiere Elements 13 stops working and closes. What might be the problem?

    elizabethmeow
    On what computer operating system is your Premiere Elements 13 running? Have you had the opportunity to update 13 to 13.1 using an opened projects Help Menu/Update?
    What are the full properties of your source media and how are you importing them that you are trying to import into the project? A quick way to get that information, if you do not know that information, is for you to post the brand/model/settings for the camera that recorded the video.
    Do you have the latest version of QuickTime installed on your computer with Premiere Element 13, and are you running the program as Administrator?
    Lots of additional questions, but the answers to the above may give us the answer that you need to resolve you issue.
    Thank you.
    ATR

  • "Adobe elements has stopped working."

    I've received the error "Adobe elements has stopped working" and then the program closes.  It has happened numerous times and now happens more and more often.  Does anyone have any fixes for this?

    I've been having the same problem.
    Win7 64bit 8GB RAM, 500GB free hard drive space.  All Win updates in place on a regular basis (last time was 2 days ago).
    I often get the "stopped working" popup message on my desktop right after I close the program (well, yeah, I would hope it would stop working when I close it) and also increasingly get it on the desktop when I open the program (before the PE12 screen opens).  This latter popup "stopped working" message will persist until I close the popup window, even though the program is working just fine.
    The most occurrences of actual crashes seem to be when doing a lot of titles (new or editing existing), when saving, and when exporting.
    For awhile it seemed (very subjectively) that rendering the project before saving or exporting possibly helped reduce the number of occurrences, but just now the "stopped working" message popped up and the program quit while I was rendering (got about 80% through).
    This time I checked the "check online for a solution" box, but to no avail--there was a brief period while Windows searched online, and then the program shut down anyway.
    I've tried rebooting, making sure other programs were closed, etc. but nothing really seems to have much effect.  The same project will save or export just fine on one occasion, then if I so much as change a word in a title it will become unstable.  The entire project is 26 minutes long.  One video track (2) with titles, one main video track (1), one audio track (mostly empty) of ambient sound with the video, one sound track.
    I will try Steve's suggestion of Ctrl-Alt-Shift for awhile on opening.  (This helps when PSE tools freeze up.)  Thanks for the tip!

  • Premiere elements has encountered an error (preferences.cpp-353)

    Hi guys, trying to get Adobe premiere elements working on a windows domain, will only run for local administrator, logged onto machine locally, not even a full domain administrator.
    Any ideas?
    Any help would be very very appreciated.

    Hi ATR,
    I really appreciate you taking the time to reply, sorry for the lack of info in my previous message was pulling hairs out when i wrote that!! I really do appreciate any help you could give with this at all.
    Here are the answers to those questions.
    1. What version of Premiere Elements are you using and on what computer operating system is it running?
         It is the latest version of Premiere Elements 13, we are trying to get it to install on Win 7 32bit.
    2. Are you running the program from a User Account with Administrative Privileges and have you applied Run As
    Administrator to the program's desktop icon?
         They are domain based machines, if you log on as local administrator on the machine the software will run, but if you log on as a domain user or even full domain admin it still doesn't load properly we get the error "Premiere Elements has encountered an error. [..\..\Src\Core\Preferences.cpp -353]
    3. Is this a "it worked before but not now" or "it never worked before" issue?
         It is new software we have never ran on our network before.
    4. Have you deleted the Adobe Premiere Elements Prefs file or the whole Folder in which it exists?
         I did a search of the entire C drive of the machines for the preferences file and couldn't find it to try deleting it.    
    5. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
         Yes i have tried installing the new version of quicktime on the machines, even though the version we already had installed met the recommendations.
    6. Does the problem exist with or without the antivirus and firewall(s) disabled?
         Firewall is disabled across the domain, i've tried disabling the AV and it didn't make any difference.
    7. Are you using the program with a mouse or one of those pen and tablet devices?
         Just a normal mouse and keyboard.

  • Premiere Elements has encountered an error (Preferences.cpp-347)

    Hi all
    System: Windows 7 x64, Adobe Premier Elements 12.0
    We are getting the following error when attempting to start a new project under one specific user.
    Premiere Elements has encountered an error [..\..\Src\Core\Preferences.cpp-347]
    I have read in other threads network installations can cause this.
    This is a network installations and we do redirect my documents to a network drive.
    I have tested this under Administrator and test accounts where my documents were not redirected and it started a new project fine.
    Other threads have mentioned that there is a possible fix and to contact customer support. I have tried to do this by logging in to this Adobe account but the only option was to Ask the Community.
    Has anybody been provided with the solution to this?
    I have tried the following but to no avail:
    -deleting the preferences file
    -deleting the 12.0 folder
    -adding access rights of the user to all adobe premiere related folders
    -looking through the registry for elements related entries and looking for related paths
    Thanks in advance

    I have searched the net for trying to find a solution but cant find any. Im sure Adobe must find a solution to this problem.

  • I have just got this error on my Windows 8.1 PC in Adobe Premiere Elements 13:"Premiere Elements has encountered an error" -- [c:\adobe\pre\main\mediacore\mediafoundation\api\inc\Keyframe/Keyframe.h-142]

    I have just got this error on my Windows 8.1 PC in Adobe Premiere Elements 13:"Premiere Elements has encountered an error" --> [c:\adobe\pre\main\mediacore\mediafoundation\api\inc\Keyframe/Keyframe.h-142]. I have found different solution on how to fix it, but it's still hard to find where to change "," to ".". When I try to change my .prel file to a .xml it all shows symbols, letters and numbers, not only numbers like a have seen others. I have a LLOOONNNGGG movie to fix. Can anyone help?

    Hoerup
    Thanks for the update. Sorry that the news was not better.
    There are several cases of keyframe error 142 being reporting, some for version 12 and some for version 13.
    In your case, we may be able to get some help from Adobe via its Adobe Chat since you have purchased, registered, latest version
    Premiere Elements.13. Let us see what Adobe Chat can do for us. Please click on the following link
    Contact Customer Care
    Premiere Elements
    Premiere Elements
    Adobe ID, Signing In
    Adobe ID, Sign In, Account Help
    Chat Panel
    If the link does not hold its set, then you will need to navigate to Chat Panel using the above links.
    As of a moment ago, the Chat Panel was seen to be active. The titles are not ideal, but they do lead
    to an active Chat Panel. I am hoping that the representative whom you reach can answer your question more
    fully or transfer you to an Adobe group which can.
    We will be watching for further developments.
    Best wishes
    ATR

  • 99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

    I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

    Thanks, I'm a bit new to asking for help!
    Version : Premiere Pro CC 2014.2 (8.2)
    It is up to date
    I'm using Windows 8.1 build 9600
    My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
    After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
    I have never had such a problem with the program which makes me think it might have something to do with a recent update.
    No other notable software was running during the export.
    I don't have any third-party effects or codecs installed.
    I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
    Unless it was installed in the trial, I do not have the Mercury Playback Engine.
    And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
    Thank you for the help! Any suggestions?

  • During app load, Premiere elements 11 stopped working all of a sudden. Why?

    Premiere elements 11 stopped working all of a sudden. Says "A problem caused the program to stop working correctly" I re-installed it but still the same.
    I haven't installed any other apps except adobe reader and there were a few Windows updates but that was it. Some history - I had defraged my hard drive when this started to happen. Wouldn't the re-install have fixed it if the de-frag caused this problem? What is causing elements to stop loading at the splash screen?

    DFMA
    Thanks for the follow up with the very helpful information.
    If this is one of those Importer QuickTime type issues, the answers are few if any.
    If you have not already tried
    Have you attempted to delete the Adobe Premiere Elements Prefs file and, if necessary,
    the whole 11.0 Folder in which it exists.
    then, please try the following...
    My expectations for the following are not high, but worth the time -
    1 uninstall the usual Control Panel way - you might want to uninstall QuickTime at the same time.
    2. free ccleaner run through (regular and registry parts)
    CCleaner - Download
    3. reinstall QuickTime and then Premiere Elements with anti-virus and firewall(s) disabled.
    Others on the list...
    1. Create a new User Account with Administrative Privileges and install and run Premiere Elements
    from there.
    2. Use a new set of installation files either from Adobe if you purchased the program from it as an online
    download, or get tryout installation files for 11 into which you can insert your purchased serial number.
    Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
    If the latter, read and carry out carefully the Note: Very Important Instructions in order to avoid an Access
    Denied message.
    We will be watching for your progress.
    Thanks.
    ATR

  • Premiere Pro has stopped working. Windows can't open it

    Hi
    When I lauch Premiere Pro, I get this error message: "Premiere Pro has stopped working" Then I get this one: " A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    I even uninstalled and re-install the program. but I get the same error. I'm sure this must be an easy-fix for somebody out there. Please help.

    There is much more help in that forum http://forums.adobe.com/community/premiere?view=discussions
    When you go to the program forum for help, you need to provide a LOT more information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
    IF NO, read below
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Premiere Pro has stopped working

    Premiere Pro has been working fine everyday since Christmas.
    I have made no changes to anything on the Computer, but suddenly this evening I get message every time I try to enter Premire Pro.  that Premiere Pro has stopped working and windows is checking for solution, and I am unable to open any of my projects.
    I have checked all drivers and gedt messages they are all working correctly.
    David Wells

    Thank you John for your help
    I have a AMD Radeon HD 7570 Driver Version 13.152.0.0
    I had already been to their site and run AMD Driver AutoDetect without any luck
    I have been  using Adobe Creative Cloud for the year since I first purchased this computer, and every programme except Premiere Pro is working OK.  I had a similar problem a few months ago after I upgraded from Windows 8 to Windows 8.1 and I then uninstalled Premiere Pro,  and deleted the AMD Beta Drivers which I had installed from AMD Catalyst following a recommendation on the Forum, and when I reloaded Premiere Pro everything worked OK  without the Beta Drivers, .and although I still received messages Premiere Pro has stopped working some times, until yesterday I had always opened  Premiere Pro after a couple of tries.  
    I was going to uninstall Premiere Pro this morning, but  following your E Mail I went back to AMD and thought I would try downloading Beta Drivers from AMD Catalyst and  Premiere Pro opened first time of asking.
    The joys of Computers, Lets hope it keeps working now
    Thanks a lot
    David

  • Premiere Elements has encountered an error: MasterClipFactory

    The windows version of my plug-in (developed using AE CS3 SDK) works fine in AE CS4, CS3 7.0, 6.5 and 6.0 as well as Premiere Pro CS4,CS3, 2.0, 1.5 and 1.0 and in Premiere Elements 3 and 4.
    In Premiere Elements 8 I get the error...
    Premiere Elements has encountered an error. [..\..Src\Clip\MasterClipFactory.cpp-361]
    when I move the mouse over my plug-in icon int he Edit panel.
    This happens before my GlobalSetup procedure is called, so I can't debug.
    Is it a PIPL problem? Any ideas?

    This happens with the Skeleton Effect example too. There must be something about After Effect filters that Premiere Elements doesn't like.

  • Premiere Elements has encountered an error - CPP-610

    Hi,
    I have a member of staff using Premiere Elements 8 that crashes the moment they select Timeline within a project.
    The error is as follows;
    Premiere Elements has encountered an error. ..\..\SRC\WIN\WINPATHUTILS.CPP-610
    Once you OK this the program exits.
    Elements is fully updated running on Windows XP SP3
    Could anyone suggest how to decode the error, it seems pretty specific but I can't pin down where/why it is failing.
    Thanks in advance

    Specific error codes mean little in this case. But a good computer tune-up can make a big difference.
    First, manually go to Windows Update and select Custom to ensure you have even the non-critical updates for your operating system. Then go to Apple.com and get the latest version of Quicktime, per the program's requirements.
    After that, I always recommend that you run Advanced System Care to clean up and defrag your system. (The program is free -- but pay attention to the installation screens or you'll also add an annoying toolbar to your browser.)
    http://www.iobit.com/advancedsystemcareper.html
    After that, go to the Help menu on Premiere Elements (or any Adobe program, even Acrobat Reader) and select Check for Updates. This will update all of the Adobe programs on your computer and add the 8.01 update for Premiere Elements.
    If you are still having problems, list your hardware specs, including the speed of your processor, how much RAM you have and how much free space is on your C drive. To run this program you'll need at least 20-30 gigs of free, clean, defragmented space on your C drive as well as additional space on your second or external drive for your media files.
    Also, list the model of camcorder your video is coming from and which project settings you selected when you set up your Premiere Elements project.

  • (..\..\Src\Timecode.ccp-995) Premiere Elements has encountered an error

    When I try to import a DV movie from my camera the Following error occurs: >Premiere Elements has encountered an error: (..\..\Src\Timecode.ccp-995)> I have no idea how to fix it, please help??

    It could be any of a number of things.
    Are you capturing from a miniDV camcorder over a FireWire connection?
    What are your system specs? What operating system are you running? Have you gone to Windows Update and manually downloaded even the non-critical updates? Have you got the latest version of Quicktime?
    Which version of Premiere Elements are you using? If version 8, do you have the latest update, per the announcement at the top of this forum?

Maybe you are looking for