Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M

Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M?
I do not see this card listed on the Adobe products page http://kb2.adobe.com/cps/873/cpsid_87347.html but am hoping someone who is more computer savy at Adobe or Nvidia or somewhere else can advise me.
I'm looking to purchase a laptop with the subject graphics card.
Rob

>Will CS5.5
http://forums.adobe.com/community/premiere/premierepro_current
See link in my answer yesterday... also...
For a list of supported nVidia CUDA cards go to the FAQ
First read http://forums.adobe.com/thread/773101
PPro Video FAQ http://www.video2brain.com/en/products-118.htm
http://forums.adobe.com/community/premiere/premierepro_current/cs5_faq_sheet
Quadro cards compared http://forums.adobe.com/thread/910140

Similar Messages

Will card nVidia geforce GTx 760 work with premiere pro?

Will card nVidia geforce GTx 760 work with premiere pro?

Yes, the GTX 760 will work nicely with Premiere on the PC. What version? With CS6, you may need to delete the "cuda_supported_cards.txt" file from the Adobe folder.
Thanks
Jeff Pulera
Safe Harbor Computers

Problem with Matrox Mini, NVIDIA GeForce GTX 570, Premiere 5.5.2 and After Effects CS5.5

Hello,
We have a couple video workstation PC's in our office.
Premiere and After Effects have been crashing lately with increasing frequency - about every two minutes now.
Here is the setup:
Hardware
Matrox Mini - Matrox Utility release 5.5.1
Nvidia GeForce GTX 570 - Driver release 275.33
Intel Xeon X5660 2.8 GHz processors
24 GB Ram
Software
Adobe CS5.5, specifically...
After Effects 10.5.0.253
Premiere 5.5.2
Windows 7 64-bit
We have two 21" LCD monitors in dual display running from the computer, and the Matrox Mini outputs a preview signal to a 15" CRT.
The crashes occur when I have After Effects and Premiere open at the same time. I am editing in a Matrox 720p29.97 timeline in Premiere. I imported several compositions from AE into Premiere through Dynamic Link and am matching audio with the animations in comps. When I switch back to AE to make an edit in the comp, After Effects generates a crash warning and then gives me the opportunity to save the project under a new name. After saving, it closes down completely. The Matrox WYSIWYG Control Panel in the system tray crashes during AE's crash, disabling the preview to the CRT from Premiere and AE. Since the Premiere sequence is a Matrox preset - in order to have output to the CRT - this freezes the timeline; the video and audio no longer play. When I save and then try to close Premiere, Premiere freezes and will not close without a force quit via the Task Manager.
In order to deal with this temporarily, I am editing in an AVCHD 720p30 sequence preset in Premiere, which doesn't send a preview feed to the CRT, obviously, since it's not a Matrox preset and the CRT is connected via the Matrox Mini. It's more than a minor inconvenience, since I use the CRT for color accuracy.
It is frustrating, since we did not have this problem until the recent CS5.5.2 update. We have tried changing drivers for the GTX 570 and changing the Matrox utility software to other versions, but no luck.
Is there a combination of GTX 570 drivers, Matrox software releases, and AE/Premiere settings that will make this work? I know there are "Known Issue" posts with Nvidia cards on Matrox's website, which include the GTX 570, but, again, this problem started with the Adobe CS5.5.2 update.
Any help here would be great, and I am willing to provide more information about the system and our crashes if it helps find a solution for the community, as I know this is not an isolated problem after reading Nvidia's, Matrox's, and Adobe's forums. I just can't find a hollistic solution on any of the individual manufacturer's forums.
Thank You.
Jordan

I've been running with Matrox for years, starting with the Axio LE. I do 75% broadcast work and find that the Matrox works very well with my kind of workflow. Monitoring is critical and since we have to deal with 3rd. party solutions, Matrox was my pick dating way back to 2006. Sure I've had frustrations with it, but I've made far more money off Matrox than frustration.
   Here's my nearly crash-free setup:
Gigabyte GZ-X58A-OC moboard
Intel 990X (only overclocking to 4.0)
24Gb of Kingston HyperX Ram
GTX580 Graphics Card
Matrox MXO2-LE w/Max
Crucial 240Gb Sata III drive (the one that has a nearly perfect score on Newegg's site)
2 x 2Tb WD Blacks Raid 0
2 x 1Tb WD Blacks Raid 0
Win 7 Ultimatte (it's a high-end version of Windows that's great for keying!)
CS5.5 Suite
Boris Red 5
Boris Continuum Complete 8
Trapcode Shine, Form, 3d Stroke, Starglow, and Particular
Optical Flares by Video CoPilot
   The reason I list all of that software, is that it all seems to get along together, including with Matrox! So, I can't say I highly endorse Matrox because I've never tried Black Magic or running an external monitor off of my video card.
    I use After Effects with all sorts of plug ins and rarely have crashes. If I put in a long day I'll have the usual crashes here and there (mainly with PremierePro), but nothing that has required evan a soft reboot of the computer.
   My frustration with Matrox is mainly the delay that often comes with Adobe coming out with a new release and Matrox taking 2 or 3 months to catch up, though when Adobe went from 5 to 5.5, there was no delay at all.
   I think that a lot of the people who trash Matrox probably haven't used a Matrox product in years. But before you listen to me, I must confess that I was an early adopter (and advocate) of SSDs and even today, many people on this forum think they're still a waste of money!
   I'll close by simply saying that I've not left Matrox after 5+ years, but keep in mind I haven't had the bad experiences that so many others seem to have had, but again, perhaps they had those bad experiences long ago.

Mercury CUDA not enabling when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks install

Been using the same setup since CS5 with the Mercury CUDA running perfectly. After recent upgrade of OS X to 10.9 Mercury CUDA is no longer available and only lets me run with the OpenGL or software options. Im using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the GPUSniffer program in the latest Premiere Pro 7.1.0 files. The LAST line make me chucle because it the first on the list of supported card in the "cuda_supported_cards.txt" file. Anybody else seen this?
--- OpenGL Info ---
Vendor: NVIDIA Corporation
Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
OpenGL Version: 2.1 NVIDIA-8.18.27 310.40.05f01
GLSL Version: 1.20
Monitors: 1
Monitor 0 properties -
   Size: (0, 0, 1920, 1080)
   Max texture size: 8192
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
--- GPU Computation Info ---
Found 1 devices supporting GPU computation.
OpenCL Device 0 -
   Name: GeForce GTX 285
   Vendor: NVIDIA (Apple platform)
   Capability: 1.2
   Driver: 1
   Total Video Memory: 1024MB
   * Not enabled by default because it did not match the named list of cards.

found a link from a couple of days ago on a creative cow forum post one of the poster saying they are from adobe stating this
Re: Mercury Playback Engine MacPro
by Peter Garaway on Nov 12, 2013 at 9:49:16 am
Hi Wendell,
Sorry for the inconvenience. NVIDIA is currently working on drivers that support CUDA on Mavericks 10.9 with some of the older NVIDIA cards such as the GTX 285 and the Quadro 4800.
For others interested, the Quadro 4000, K5000 and GTX 680 ect... work with CUDA in 10.9.
Best,
Peter Garaway
Adobe
Premiere Pro
I have latest CUDA drivers, so i guess i am just waiting till a proper update that have the fixes to support my card.

NVIDIA GeForce GTX 775M compatibility with Adobe CC?

It seems really odd that a late 2013 iMac wouldn't be able to run Adobe CC on it - or, at least, wouldn't be able to support Adobe CC with its Graphics card. The graphics card is GeForce GTX 775M, and I've just been told that the software can't be supported by it. Will there ever be support, or an updates that will allow this?

Which program, and have you asked for help in a specific program forum?
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
I do know that "will this card work" questions are common in the Premiere video editing forum, with the answer generally being "yes, if you have a driver that works"
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Mac & nVidia Driver http://forums.adobe.com/thread/1075592
-and http://www.nvidia.com/object/mac-driver-archive.html

Imac 2012 NVIDIA GeForce GTX 680MX will it work with adobe Mercury playback Engine?

imac 2012, 28" 16 gigs ram
NVIDIA GeForce GTX 680MX 2 gigs ram, will it work with adobe Mercury playback Engine for accelerated rendering in Premiere Pro & After Effects

One would certainly think so, since earlier, lesser GTX cards were supported...
http://www.adobe.com/products/premiere/tech-specs.html
Supported NVIDIA graphics cards for GPU acceleration
GeForce GTX 285 (Windows and Mac OS)
GeForce GTX 470 (Windows)
GeForce GTX 570 (Windows)
GeForce GTX 580 (Windows)

Is Photoshop Elements v. 8.0 compatible with OSX 10.10.3?

Is Photoshop Elements v. 8.0 compatible with OSX 10.10.3?

It would be best if you contacted ProTools technical support or their web based forums/support.
Good luck,
x

NVIDIA GeForce GTX 680MX 2 gigs ram, will it work with Mercury playback Engine for accelerate

NVIDIA GeForce GTX 680MX 2 gigs ram, will it work with adobe Mercury playback Engine for accelerated rendering for Premeire Pro cs6?

I am a PC guy but, I have 6 work stations with CS6 but the wife wants a Mac so I am getting her an imac with the NVIDIA GeForce GTX 680MX 2 gigs ram. Do you think this video card in the mac will still be able to utilize the Adobe CS6 MPE?
It's not formally supported by Adobe for GPU acceleration; however judging from the fact that the lesser GTX-650M is (with 6.02 update), and the end-user ability to enable support for unsupported cards in Adobe apps, it should work.

Looking for a for an all-in-one printer that is compatible with greeting card programs...

looking for a for an all-in-one printer that is compatible with greeting card programs...my original one was an HP PSC 1510...replaced it with a Deskjet 1050 & it does not work...any suggestions?

I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.

Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Will Premiere Pro CC work OK with Nvidia GeForce GTX 765M?

Will Premiere Pro CC work OK with Nvidia GeForce GTX 765M?

This laptop I am on right vnow has a n nVidai GTX 765M and it works beautifully on Premiere CS6, CC and CC 2014. You do have to add it to the Adobe file "cuda_supported_cards.txt file or simp[ly delete it. I hope you know that you have to be plugged in to the AC line to successfully what to edit with a laptop. Also you can improve the GPU performance if you reset the memory clock on the GPU to 1500 MHz from the default 1000 MHz. It is because nVidia.slows down the clock to conserve battery. If you register on the site you can see my results on our Premiere Pro BenchMark (PPBM) site.

Is nvidia geforce gtx 675mx card compatible with fcpx

Is the Nvidia geforce gtx 675mx comes with the new iMac 27" compatible with fcpx?
I could not find it on Apple's list of cards required or fcpx

It should be.
I have only heard about issues with the 640mx card..
But FCPX uses OpebCL and other system API's to use the GPU, so if someting is not working, it should be the OS having issues..

Problems with graphics card with Windows 8 bootcamp on new imac

I just purchased a new 2013 imac (27inch, with the nvidia geforce gtx 680mx 2gb).
I partitioned the drive using bootcamp and successfully installed windows 8 pro 64bit as well as the support softward from Apple for the drivers.
My problem is that the display in windows says it is being run by a Microsoft basic display adapter and only using 256mb of memory and doesn't seem to be an Nvidia card at all, let alone the 2gb of video memory I am supposed to have.
I have tried downloading drivers directly from Nvidia, but when I run them it says I don't have compatible hardware.
I'm hoping someone can shed some light on this issue.
Please help.

After I read other discussions on the same topic, I found out that the problem is that when you install the drivers via the Bootcamp "windows support software" USB key, for some reason the NVIDIA drivers are not installed, although they are present in the Bootcamp folder.
How I solved the issue: Starting from the Peripherals Manager window (the one that shows all what is inside your machine), I opened the Graphic card "folder" and double-clicked on the "VGA standard card" line.
Then I clicked on a "install driver" button, browse through files, and selected the NVIDIA folder within the Bootcamp folder on the USB key.
It took some time but after that it had fully recognized the GTX 680 MX card.
I rebooted and the system itself set up to the 2560 x 1440 resolution.

Please help with graphic card

hey guy i have a problem picking a graphics card that is compatible with my computer i have a pavilion a6030n specs are
Chipset
GeForce 6150SE nForce 430
Motherboard
Manufacturer: ECS
Motherboard Name: MCP61PM-HM
HP/Compaq motherboard name: Nettle-GL8E
my psu is only a 300 watt i only want a card to make my desktop like a home theater hd/bluray movies no gaming i want it to support 1080p full hd and have a hdmi output. is there any card like this that i can just install with out upgrading my psu please help thanks

Please help. I am confused. I have the same specs as the original poster and am also looking to upgrade my system, but i'm confused. The video card you recommended appears to be 512MB, however, HP's specs for the motherboard state:
Integrated graphics using nVidia GeForce 6150SE
Up to 256MB (with 512MB or more system memory)
Also supports PCI Express x16 graphics cards*
So, if it says it supports up to 256MB, should i limit my search for a new video card to only ones that have 256MB, or will a 512MB one, like the one you recommened, also work?
Thanks.

I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB CUDA grayed out Can somone help?

I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB I downloaded the CUDA Driver Version: 6.5.46 but I still dont have the option in after efects to use the CUDA for beter permance ? Can somone help?

Hi Nick,
Nick Politis wrote:
I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB I downloaded the CUDA Driver Version: 6.5.46 but I still dont have the option in after efects to use the CUDA for beter permance ? Can somone help?
After Effects uses your CPU and RAM Primarily, not the GPU.
You only need NVIDIA CUDA for one function: the acceleration of ray-traced 3D compositions. Your newer Maxwell NVIDIA GPU does not contain the OptiX Library necessary for this function so it will not ever work for accelerating ray-traced 3D compositions. Sorry.
The After Effects team is no longer working on this feature and suggests that you use Cinema 4D Lite (bundled) for your 3D work instead. There are also some great third party options for adding 3D elements to After Effects compositions like Invigorator Pro and Video Copilot Element 3D.
Hope that clears things up.
Thanks,
Kevin

Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M

Similar Messages

Maybe you are looking for