Premiere Elements 10 reinstalled in windows 8 the monitor give no picture during editing play of avchd video 1020x1080i 25. Have worked OK before in win 8.

I have reinstalled premiere elements 10 in win 8 and after reinstallation it is not possible to edit the video because the monitor does not show the pictures when I play the video, only sound comes OK. What can I do?

toresak91
Are you saying that all you did was to reinstall Premiere Elements 10 on the same computer? The video card/graphics card was the same before and after the reinstall? There is a serious Premiere Elements 10/NVIDIA GeForce issue, and I just want to make sure that you are not caught up in that issue. See the fullest details and information on this in the Announcement at the top of this forum.
What worked before the reinstall of Premiere Elements 10
a. Premiere Elements 10 as a whole
or
b. The playback of this specific AVCHD file in Premiere Elements 10?
If you are using this never before used AVCHD file in the reinstalled Premiere Elements 10, there is always that possibility that you are now using AVCHD.avi which is not supported by Premiere Elements. AVCHD video compression is supported but not the specific combo of AVCHD.avi.
Please review, consider, and clarify and then we will customize a troubleshooting to get to the core of the matter.
Thank you.
ATR

Similar Messages

  • Premiere Elements 13, on Windows 7 64 bit, Problem fading to black at end of video.

    With Premiere Elements 13, on Windows 7 64 bit, I am attempting to end a video with a fade to black transition.  For whatever reason, it is fading to black then returning.  Yes, I have tried it all three ways right, left and in between, but the it keeps fading out then in.  And yes the transition is at the very end of the clip.

    morrisst
    I have Premiere Elements 13 on Windows 7 64 bit.
    When I apply the Dip to Black video transition to the last Timeline clip, the Alignment is Left Clip. You have been there and done that.
    Can you post a screenshot of what you are seeing when the Dip to Black transitions stops on your Timeline?
    When I do as you have suggested I see this
    Have you expanded the Timeline with the -+ slider above the Timeline and inspect the end of the clip as well as
    other track content above or below, do you detect an fragments that might be a factor in what you are seeing?
    If you start a new project, do you get the same result?
    Could you post a screenshot displaying what you are seeing with the Dip to Black video transition placed at the end
    of the last clip on your Timeline (Alignment: Left Clip)?
    Thank you.
    ATR
    Add On..I posted this reply earlier today but somehow the last part was not included in the thread. So I am adding that now to the original content.

  • My Premiere Elements 9 on Windows 7 no longer opens (it always did before); now at the welcome scree

    My Premiere Elements 9 on Windows 7 no longer opens (it always did before); now at the welcome screen it "blinks" once then hangs, without any of the components initializing- please help

    If that does not work, then I would see this FAQ Entry: http://forums.adobe.com/thread/792580?tstart=0
    It starts with a general checklist for getting PrE set up properly, then goes into some links on tuning up one's system and OS, and finally has links to many troubleshooting articles, plus tools to help one troubleshoot issues.
    Good luck,
    Hunt

  • I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number?

    I bought the Mac version of Premiere Elements, can I get the Windows version for free or cheap with my serial number? I'm about to migrate back to PC soon and I'd love to not have to buy the program again since I just bought it. Under my order history though it only shows it for Mac so I wanted to make sure.

    ihavea4
    The boxed packaging is not sold by Adobe direct. If you want to explore that type of purchase which offers the perk of a Windows and a Mac installation disc, you need to purchase from an authorized reseller who is not going to offer you "upgraded pricing". The seller would be its own entity with its own pricing and own return/refund policy. Sometimes the authorized reseller price may be less than the Adobe"upgraded pricing".
    Did you purchase your Premiere Elements 13 Mac from Adobe direct and are within 30 days of purchase? If so, you can contact Adobe Chat Orders to ask for return/refund. And, then you can explore the authorized resellers for pricing and availability of the box packaging. Maybe check out the pricing all around before making any final decisions.
    Please review and consider.
    Thank you.
    ATR

  • Transferring Premiere Elements 11 from Windows 7 to Windows 8 computer question

    Do i have to use my backups to reinstall Premiere Elements correctly, or can i simply add the internal drive i used in Windows 7 strictly for Premiere, move it to the new Windows 8 computer, reinstall the Elements program, and direct it to the proper hard drive?  I have current incremental backups on a NAS drive, but it seems like i should just be able to use the internal drive that already has everything on it.
    Thanks,

    awgriffey2013
    What do you have -  purchased installation files/serial number from an online purchase from Adobe direct or installation disc with serial number purchased in boxed packaging from an authorized reseller.
    If you do not plan on using 11 on Windows 7 thereafter,
    Deactivate 11 on 7, Help Menu/Deactivate - close out of there
    Uninstall Control Panel Route
    Deactivate and uninstall are not the same thing. Depending on your plans, you may not want to uninstall, just deactivate.
    You are simply going to install Premiere Elements 11 to Windows 8 computer, using installation files or installation disc.
    Do you have Premiere Elements 11 Windows 7 projects that you want to salvage? If so, how many? I would archive them
    File Menu/Project Archiver/Copy Project and transfer the Copied Folder via USB to the Windows 8 computer.
    For Elements Organizer considerations, please review the following
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
    At this time I have no comments on your backups on NAS and how it might relate to your end goal.
    Please review the above and then let us know if any of the above works for you.
    Thanks.
    ATR
    Add On...Just in case note, Adobe allows you to install/activate the purchase serial number for a given product on no more than
    2 of your computers.  Then use these same products with the same activated serial number one at a time.

  • Adobe Premiere Elements 4 Crash - Windows Vista

    After approximately 14 to 16 seconds of viewing any .mod video file recorded from my JVC Everio camcorder a Windows error message appears and Adobe Premiere Elements 4 immediately crashes. Is there a patch or fix for such a problem? I have checked that my computer system meets the system requirements and I am unsure what else to do other than returning the software?
    Error message in full reads:
    "Adobe Premiere Elements.exe has stopped working. A problem causeed the program to stop working correctly. Windows will closs the program and notify you if a solution is available"
    My new HP Pavillion (m8075a) computer system includes:
    Intel Pentium D CPU 3.2GHz
    3070 MB (RAM)
    210 GB Free Space C:Drive
    Windows Vista O/S 32-bit
    RealTek HD Audio
    NVIDIA GeForce 7500 Le
    Samsung Monitor SyncMaster 226BW(Digital)
    Any assistance would be appreciated.
    Regards,
    Kim

    My objective is to handle MOD files from a JVC Everio Hard Drive Camcorder with Adobe Premiere Elements 4.0 (PE4) as PE4 crashes after a little while when using MOD or MPG files.
    Sorry Steve but I dont want to use the software that came with the JVC Everio camcorder. I bought PE4 (in euros ...) to use it. By the way MOV files used by QuickTime have nothing to do with MOD files from JVC Everio camcorder! Yes I know, it's confusing.
    After some months of useless forums, reading, hardworking and frustration, I finally found a solution to the problem!! PE5 works quite well and no crashes have occurred so far....
    Here it is. It's not straightforward as you have to use two different free programs but the method is simple to follow.
    1. Transfer MOD video files from the JVC Everio camcorder to the PC.
    2. Convert MOD files into MPEG2 files with the help of a freeware program (I used Converio)
    3. Convert MPG files into DV-AVI files using Free Video Converter.
    This free program is very simple to use and DV-avi files output is compatible with PE4 which is not the case with some other conversion programs.
    As DV-AVI files are not compressed, they are more easily handled by video programs.
    I havent been able to directly transform JVC MOD files into files fully compatible with PE4. If someone knows how to do this, please tell me.
    In conclusion, I feel it is unacceptable that neither JVC nor Adobe offer the compatibility of their products. The information provided by these reputable companies is deceitful for unaware users and sometimes wrong.

  • Premiere Elements 12 I get the error ..\..\Src\Core\Preferences.cpp-347

    When I try to run Premiere Elements 12 I get the error ..\..\Src\Core\Preferences.cpp-347, I've uninstalled and reinstalled as an admin, tried running as an administrator, and every single time I open the program I click on video editor and then new project, I get the black and purple candy cane loading bar, shortly (sometimes instantly) after I get the error message.
    Any help is much appreciated

    James Neston
    Since your duplicate thread has been closed and all replies directed to this one, I wanted to make sure that you did not miss my message going between threads.
    The following is a copy/paste of what I wrote in your now closed thread:
    James Neston
    Please avoid duplicate posts since they tend to confuse the person writing them as well as the people trying to respond to the question.
    I have seen the error that you present appear often, but I have not seen an agreed on the resolution, if a resolution at all.
    What I would do first is to update your Premiere Elements 12 to 12.1. See the opened project's Help Menu/Updates. If the problem persists after the update to 12.1, then let us look at the Scratch Disk set up and situation.
    When you go to Expert workspace, Edit Menu/Preferences/Scratch Disks, where are all the categories directed to on the computer hard drive and how much free space is at the location(s)?
    Did you install Premiere Elements 12 to its default location or other. If other, where?
    There are a lot of Troubleshooting avenues to go down (some old, some new, some questionable), but let us start with the above and then decide what next.
    But before all that, please respond to the questions already asked you by SG.
    Thanks.
    ATR

  • Trying to install Premiere Elements 10 on Windows 7 but keep getting error message 'A reduced set of content has been installed' - help!

    We bought Premiere Elements 10/Photoshop Element 10 a while ago and it worked brilliantly on our Window XP machine, but since we moved to Windows 7 last year we can't get Premiere Elements 10 to work properly and always get the error message 'A reduced set of content (Instant Movie Themes, Title and Menu templates, etc) has been installed. You can install the full content by inserting your Content DVD or downloading it. Do you want to install now?'. So I've tried reinserting the DVDs and installing them. I've uninstalled all the software and started again, but each time I get the same message at the end of the process. I've spoken to the computer shop I bought the computer from and they say Windows 7 is incompatible, but that doesn't seem to be what the Adobe web site says. Please, any advice welcome as I've got a year's worth of videos I need to edit.
    Thank you!
    Adobe Premiere Elements 10.0 
    Windows 
    2 GHz or faster processor with SSE2 support; dual-core processor required for HDV or AVCHD editing and Blu-ray or AVCHD export.
    Microsoft Windows XP with Service Pack 2, Windows Media Center, Windows Vista® (all applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems), or Windows 7 (Adobe® Premiere® Elements Editor runs native on 32-bit and 64-bit operating systems; all other applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems)

    cathyj
    Are you working with Windows 7 32 bit or 64 bit? What video card/graphics card does your computer use? NVIDIA GeForce? And, are you doing your download and installing with antivirus and firewall(s) disabled?
    Premiere Elements 12 is compatible with Windows 7, 8, or 8.1 64 bit.
    If you have tried to obtain the Premiere Elements 10 Content from the installation disc labelled for Content for your version and operating system and that is not working, then can try downloading and installing the Content from the following Adobe link if you do not decide to click on the message to initiate the content download from within the program.
    http://www.adobe.com/special/premiereel/downloads/
    We will be watching for your progress.
    ATR

  • Premiere Elements 4 on Windows 7 shuts down when I try to create disk folder

    Loaded Premiere Elements 4 on a new computer running on Windows 7.  Previously used this software on Windows XP with no issues other than slow.  After creating a project and going to Share/Burn Disc I receive a message that Adobe Premiere Elements.exe has stopped working.  

    Dolly Jeane
    Are you getting any message about MPEG2 Activation?
    What are you trying to do....burn to folder Folder (4.7 GB) or burn to disc? There seems to be a conflict between your thread title "create disk folder" and body of reply "going to Share/Burn Disc".
    I have Premiere Elements 4 on Windows 7 64 bit, and it has been running OK for Share/Disc/DVD disc with the standard or widescreen presets.
    Are you having problems with the burn to folder as well as burn to disc? If you have not tried burn to folder, please try that and let us know how that works.
    Also, please tell us what the burn dialog shows in its Quality area for Space Required and Bitrate (with check mark next to Fit Contents to Available Space.
    Thanks.
    ATR
    Add On....
    What is your project preset?
    What are the properties of your source media?
    Do you have menu markers on the Timeline?

  • Premiere Elements 8/9 Windows 7 64bit

    History....
    I was running Premiere Elements 8 on Windows 7 32 bit with little to no problems.
    I recently Upgraded my system primarily for more RAM to use with video editing and upgraded to the 64 bit version of Windows 7.
    I re-installed elements 8 and the same format of video that was fine on the 32 bit now showed up as a red screen in playback through elements with audio.
    This wasn't the only problem.  Sometimes when starting up elements the home screen was just blank and would not show the timeline or any other boxes for that matter.
    I decided to purchase elements 9.0 and so didn't try too hard to iron out the above details.
    However I'm now experiencing the very same problems with version 9.
    When the program starts up (no error messages) the screen just shows me the shell  and no other boxes show including the timeline!!!
    Everything is greyed out other than starting new project again which throws up the same scenario.
    PLEASE HELP!!!!!
    PS I have also tried changing the project settings but to no avail

    Hey Bill and thanks for your answer.
    Without changing a thing (to my knowledge) Prem 9 is now starting up properly.
    Well 5 out of 6 start ups have been successful!!
    Not sure why this is, but project editing and manipulation all seem to working fine and have even exported an end product!!
    I guess I'll just have to see how things go.
    Thanks again for your suggestions and Happy New Year!!!!

  • Adobe Photoshop Elements 10 & Premiere Elements 10 for Windows 7 64 bit install

    I have Adobe Photoshop Elements 10 & Premiere Elements 10 for Windows & Mac - Full Bundle Version.  It comes with 5 disk, to install on win 7 64 bit you use disk 2, what is disk #4 used for?
      No instuctions found with software and Adobe chat does not know.  Thank you

    It is the content disc for Windows.  You can find additional details at Install Premiere Elements, Photoshop Elements - http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html.

  • Complete uninstall of Photoshop Elements & Premiere Elements 9 from Windows 7 64 bit

    I purchased Photoshop Elements 11 and Primere Elements 11.  I am manually uninstalling Photoshop and Primere Elements 9 before installing ver 11.
    I went through the Control Panel - Add/Remove Programs to do this.  The process completed, but the following problems remain:
    1. Entries for Photoshop Elements 9 and Primere Elements 9 are still in the list in CP - Add/Remove Programs.  Re-uninstalling from there brings up Windows Installer msg " This action is valid for products that are currentlly installed"
    2. Entries for Photoshop Elements 9 and Primere Elements 9 are still in the Start Button - All Programs.
    3. The entries for the uninstalled programs are not listed at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
    3. I could delete the folders pertaining to Photoshop Elements 9 from where the files were installed originally.  However, when I try to do that I get a msg saying that I need permission from SYSTEM to do that and the delete fails.
    A gazillion folders and files remain in D:\Program Files (x86)\Adobe\Adobe Premiere Elements 9
    4. The only entries in Services.msc for Adobe are for Acrobat Update Service and Flash Player Update Service.
    So, obviously, the uninstall did not complete properly.
    How do I manually remove all traces of Photoshop Elements 9 and Primere Elements 9 from my system?  Does Adobe have any automated tool to do this?
    Thanks.
    Aloke Prasad

    There is a "clean script" for CS products that you might look at, but I have NO idea if it works for Elements products
    CS5 Clean Script http://kb2.adobe.com/cps/829/cpsid_82947.html
    or http://www.adobe.com/support/contact/cs5clean.html

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • Loading & running Premiere Elements 9 in Windows 8

    Can I load and run Premiere Elements 9 in Windows 8???

    Hi John,
    Premiere Elements 9 has not been tested and is incompatible with Windows 8
    Please consider purchasing the latest version 12.

  • Question: Installation of Premiere Elements 10 in Windows 8.1.

    Hello!
    I have installed Premiere Elements 10 on my new PC with Windows 8.1.
    But I didn´t get any Icon to start the program with? At the same time I
    installed Photoshop Elements 10. Then I got an Icon to start that program with.
    How shall I get an Icon for  Premiere Elements 10?
    Best regards
    Gunnar

    Gunnar
    Go to
    Local Disk C
    Program Files
    Adobe
    Adobe Premiere Elements 10
    then, in the Adobe Premiere Element 10 Folder, scroll down to see the files
    Adobe Premiere Elements 10.exe  (will open to Welcome Screen)
    and
    Adobe Premiere Elements.exe (will open and bypass the Welcome Screen)
    Right click the one you want, select Sent to: from the pop up list, and then select "Desktop (create shortcut)".
    Please let us know if you are OK with the information.
    Thank you.
    ATR

Maybe you are looking for