Premiere Elements 10 Video Preview Not Working

I have all my project setting correct but when I import a clip and try to preview it all I see is a white screen. The audio plays but the video does not.
System Specs:
Quicktime 7.7
Windows 8.1 64-bit
EVGA GeForce 780 Ti
ASUS Rampage IV Black Edition
I've updated all my drivers but I can't seem to figure out what wrong in any of the other threads.
Can I please get some help with a solution?

dobilia
There is an Announcement at the top of this forum which goes to the core of this type of issue. Please check Announcement at top of this forum.
The odds are that you will need to roll back your NVIDIA GeForce 780 Ti driver version as far back as necessary to get your Premiere Elements 10 Windows working again. All the details are in the Announcement at the top of this forum. But, if you have questions or need clarification on any of this, please do not hesitate to let me know.
Again, the answer to this issue targeted at the Premiere Elements 10 NVIDIA user is not to update the driver to the latest version, but instead to roll it back.
Thank you.
ATR
Add On...for your convenience...this is a copy paste of the Announcement at the top of this forum.
Announcement: Premiere Elements 10 NVIDIA Video Card Driver Roll Back
Hide Details
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.ht ml

Similar Messages

Premiere elements 11- PitchShifter not working?

Pitch shifter in Premiere elements 11 is not working as good as it was in Premiere elements 7. Here's some of my issues:
When I change the pitch, the end of the audio is cut off/out of sync
When a clip is short, the audio won't play if it has the pitch shifter effect
When I split a clip with pitch shifter applied, the audio skips
I would like it if the pitchshifter would be more like the one that was in premiere elements 7.

Two questions... does your project match your video?
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
And, just what are you editing?
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

My serial number for adobe photoshop elements 12 and premiere elements 12 does not work. On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9. I have purchased those products in the past, but just recently upgraded to elements 12. I can use the the photoshop organizer, but can't open the photoshop editor.

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Redemption code for Adobe photoshop/premiere elements 11 does not work

redemption code for Adobe photoshop/premiere elements 11 does not work

I am having the same issue except that my premiere elements code worked great, but the photoshop elements key failed. Ugh.

Video preview not working

When working on a project, the video preview is no longer working, neither for individual video preview or for overall preview of the project video composite. I have no idea what to do. It worked before. I am on Windows 7 64 bit with Premiere Elements 10.

jhughthomas
Since you are a Premiere Elements 10 user with a display problem, the first order of business is to determine if your computer uses a NVIDIA GeForce video card/graphic card. The Announcement at the top of this forum tells it all, the problem and the how to fix. For your convenience, the following is a copy/paste of that Announcement.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are
experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of
troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained
workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce
video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card
driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as
March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any
corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for
the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
If you fall into the Premiere Elements 10 NVIDIA GeForce display problem, then your answer is to roll back your card driver
(typically that has been requiring roll back to about May 2013). This factor needs to be ruled in or out at the onset of the
troubleshooting plan.
Equally important questions include:
a. If you start a new project, do you have the same problem?
b. If you use the same source video in the project with or without going to a new project, do you have the same problem?
We will be watching for your progress. Please do not hesitate to say if you need clarification on anything written.
Thank you.
ATR

Video preview not working, I can see only white screen.

Hello, I have been using Adobe Premiere on my Vista64 for a while, but few days ago I started having problems with previewing video. I can see only white screen, which doesnt react on anything I do in premiere (trying to preview movie, add grids etc.) I tried to reinstall many times but only thing I managed after one reinstall was that it started showing me what is on the timeline when I clicked on a timeline, but when I wanted to play preview it was frozen and then it turned white again. Since that it is still white.
Playback in other adobe programs (such as After Effects) works fine on my computer.
Would you please help me to find out what causes this problem and how to fix it? (I doubt it is codecs because it worked fine before and then it suddenly stopped working without any change in codecs...)

It may or may not be possible to verify the usage of such a technology device. And where did you get the idea that it costs $10 to manufacture and sell an iPad? I think the parts cost alone was $260, not counting manufacturing, shipping, storage, retail space, salespersons, helpdesk support, all the other overhead costs, etc. etc.
With so many people out there trying to scam the system, it will be an uphill battle to try to convince anyone that you bought it and didn't open the box for 14 months. That's very unusual.
At some point, the store you bought something from (in this case it was Apple) has to say no. What if it had been unopened for 2 years, or five years, or 20 years? This is what the warranty period is all about. It starts on the day you buy it and ends at the end of the warranty period, regardless of usage.
I am sympathetic to your plight but if you are able to get a new iPad (refurbished would be more likely), it will be through the kindness of Apple going above and beyond. If you do not get one, it is not Apple's fault you waited this long and there is no requirement for them to replace it.

Premiere Elements 10 Transitions not working

I have added cross disolve transitions to Premiere Elements 10, and tried increasing duration, but does not seem to work (just vague blurring). I have recorded to DVD to see if transitions visible, but to no avail.
I have been successful in Premier Pro 4 and Serif X5, but wish to use Premier Elements as easier to split timeline and make cuts (tedious in PremierPro 4). Can't afford Premier Prof 5!!
Downloaded from Canon HV 30 HDV camcorder. Over 20 hours of video to edit!
Any suggestions?

Welcome to the forum.
There can be several reasons that a Cross-Dissolve (or some other Transitions) might not work.
One of the most common is that the user just makes a Cut, but does not alter the footage, and when they place the Cross-Dissolve over that Cut, there is not change, as the Frames have not changed.
The next is when one adds a Cross-Dissolve between Clips, that do not have adequate Handles, extra Frames, that are necessary for the Transition to function properly. This ARTICLE goes into more detail on Handles.
Do either of those situations have anything to do with what you are experiencing?
If not, can you post a screen-cap, showing the Clips, to which you are having issues with the Cross-Dissolve Transitions, and tell us exactly what you have done, prior to the addition of the Transition?
Good luck,
Hunt

Video Preview not Working in CS6

Before AE CS6, I was using AE CS 5.5 on my MacBook Pro (model 8,3) and I could always go to AE Preferences:Video Preview and choose my additional monitor for previewing. I was previewing my Stereo 3d comps perfectly on my 3D hdtv through a HDMI to Mini Display Port cable.
I now have a Mac Pro and AE CS6 and in that preference, the "Output Device" dropdown only lists Firewire and Computer Monitor Only. With my old setup, I could choose my TV and everything was great. But this new setup won't allow me to see or choose my TV.
Please help! Has anyone else had this problem? Has something in AE CS6 changed for external monitors? I can't tell if it is CS6 or the fact that I have a new Mac Pro and it's video card might be different...

That's a great lead. I realized that Final Cut Cut Studio 6 was on my laptop before but it is not on my new Mac Pro. FC Studio 6 includes a bunch of codecs as I recall. So I went to install it on my new Mac Pro and I got an error message that said my Mac cant install Power PC architecture (or something like that) and wouldnt let me install it. Any Idea how I can get those codecs without installing FC Pro 6?
PS: I tried AE CS6 on my TV and it worked like a charm. There were lots more option in the Video Preview Preference.

Video previews not working in iTunes

Hi all,
I've seen this posted a few different ways without any resolution to the problem so I thought I would give it a shot.
Video previews are not working properly for me. When in the iTunes Store and I click on a "View Trailer" for a movie or preview for a music video, a pop-up window appears in iTunes with a white background. The audio will kick in but the video never starts. I am using iTunes 9.2 (61).
Has anyone uncovered a solution to this?
Thanks!

Just to clean this unresolved issue up, seemingly the problem disappeared after upgrading to iTunes 9.2.1 (5).
Thanks!

ITMS Video Previews not working

I have updated both my Macintosh computers to QT7.03 and iTunes 6. On my Mac Mini everything works great. On my PM G4 Quicksilver however, the iTunes Music Store doesn't quite work as expected.
For some reason I can not preview videos available for purchase. When I click the "Preview" button the image in the top left of the screen turns solid black and all I get is the audio of the video for 30 seconds. For some reason the video refuses to preview. That being said, if I import standalone video into iTunes it plays fine and if I go to the Trailers section of the iTMS they also play fine. It's just the previews of videos available for sale. On the Mac Mini these previews work fine so at least I know what is supposed to happen.
Can anyone recommend any solutions? I have tried reinstalling iTunes 6 and have repaired permissions to no avail.
Thanks,
Jason.

Still not working with iTMS 6.01, QT 7.03 and Tiger 10.4.2.
Can anyone help?
Please?
Thanks,
Jason.

Premiere Elements 12 Download not working

I downloaded Photoshop Elements and Premiere Elements 12 from Amazon. The Photoshop portion of the download works great, but the Premiere Elements portion doesn't show up as downloaded. I've tried the set-up and it says it needs the 64-bit version; I've tried the adobe set-up, and it only downloads the Photoshop portion. Any ideas what I'm doing wrong?

Hi fedch,
Kindly specify OS version that you using so that we can help you appropriately.
To download please try : http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
Run Adobe Download Assistant:
Choose "Video" under "All products"
Download Premier elements from Product you may like".
Troubleshoot compatibility mode : Make older programs run in this version of Windows - Windows Help
Thanks,
Atul Saini

Link for Adobe Premiere Elements 11 will not work. Any help please?

I bought my Premiere Elements package from another seller which gave me a link to download from Adobe. The product key thing is legit but every time I click on the file link for windows, my laptop comes up with this message: "The file archive of Adobe Premiere Elements 11 is missing. You need all parts in the same folder in order to extract Adpbe Premiere Elements 11. Please download all parts."
What does this mean??? Can anyone help me??? Please!

it means you only download of the 2 needed files. there are files 1 of 2, and 2 of 2. you need both. try again.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Ichat video preview not working in FCP

I am attempting to work with a client utilizing the iChat Theater preview in Final Cut Pro. His Mobile.Me address is in my buddy list. I initiate the preview in FCP and it says that I need to invite a buddy, yet when the chat box pops up and I attempt to initiate a chat by selecting "video chat" it will immediately grey out (the video chat line) when I enter any name at the bottom, leaving only "text chat" selectable. Does the "buddy" need to be logged into their MobileMe account beforehand for this to work?

Hi,
Yes the Buddy needs to be Logged in.
In fact I would do it the other way round.
I would have FCP launched.
Start A Video Chat.
Select iChat Theatre from the File Menu of iChat.
Choose FCP in the Navigation thingy it should then go to the open item.
With smaller files and something that does not take to Launch you can drag the file over the Video Chat you are having.
Two white dotted line boxes appear giving tow option of Share with iChat Theatre or Send File.
10:02 PM Wednesday; February 3, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Store video preview not working. Blank/grey pop-up preview

I use the preview often before a purchase. And as of today my preview no longer works. The window pops open but never starts the video. Just a grey screen. I searched for an answer and found nothing. Any help? I'm sure it's a simple solution. Thanks in advance.
Message was edited by: theBman
Message was edited by: theBman

I had the same issue today and I was able to resolve it.
My current setup included the Altona - USB to HDMI converter. I use this for a 3rd display setup. To use that I used some software called "Display Link". Once I removed that software and rebooted it fixed my issue. If you do not have the same setup as me, try to remember any software that you may have installed or tweaked that plays with your video display card(s) and or with Quicktime. Yeah even though it may have worked when you set that up it may now work weird due to any Apple updates.
Look for :
DisplayLink Software
WMVA player stuff
Quicktime PLugins
Hope this helps out in anyway

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Premiere Elements 10 Video Preview Not Working

Similar Messages

Maybe you are looking for