Premiere elements 10

Hello,
a film made in adobe premiere elements 10.0 , can not be transported= exported to tape (digital video) ,
i can well import a video from tape to PC
i'm working with firewire( with texas instruments chip ) unther windows 7 64 bit
camera : Sony DCR HC-1000E
It well works fine with premiere elementens 3.0 !!
Can you help ??
Best regards,
Frans Bryon
[email protected]

fransbryon
My comments on your issue come from what I have read. Based on that, I have searched online and have not come across any Premiere Elements 10 Windows Share/Tape problems.
If you have not already, you might want to compare what you were doing in this regard using Premiere Elements 3.0/3.0.2 (where you say it works) with the details for Premiere Elements 10 Share/Tape in the Premiere Elements 10 Help PDF.
1. Have you reviewed the Adobe details for the Share/Tape (Record to DV tape, described in depth in the Premiere Elements 10 Help PDF (around page 279 of 309)?
http://help.adobe.com/en_US/premiereelements/using/premiereelements_10_help.pdf
2. Have you checked your Premiere Elements 10 project settings against the camera setting?
Just some thoughts for now.
ATR

Similar Messages

Is there a way to create and edit a video in portrait mode / 9:16 in Premiere Elements 12 or 13. Playback on an iPhone in portrait position.

I'm editing iPhone app video for posting as the first screen in the Apple app store. Required size for the video is 750:1334, 9:16. I there a way to setup the initial video in portrait mode? Many posts for how to rotate a specific clip, but I need the whole video in portrait position. How to accomplish this? I'm using Windows 7 and Premiere Elements 12 and now 13.

LaurieFrick
Thanks for giving this portrait Edit area monitor shape a look.
I have Windows 7 64 bit and Windows 8.1 64 bit and have done the work using Premiere Elements 12/12.1 on Windows 7 64 bit.
Here is a step by step
Find the DSLR [email protected] file
Local Disk C\Program Files\Adobe\Adobe Premiere Elements 12\Settings\SequencePresets\NTSC\DSLR\1080p\
And, in that 1080p Folder is the DSLR 1080p30@ 29.97.sqpreset file that you seek.
1. Copy the
DSLR 1080p30@ 29.9.sqpreset fileI
and paste it to the computer desktop in a newly created folder named 1920p.
2. Open the 1920p Folder and edit the ..sqpreset file in Notepad.
To do that right click the .sqpreset, and, from the pop up, select Open With and then Notepad.
3. In the Notepad document, you are going to edit in only 2 places for now, switching 1920 and 1080 to 1080 and 1920 at the top and bottom
sections of the Notepad document.
Then go specifically File Menu/Save of the Notepad document and hit Save.
4. At this point, you have the edited.sqpreset file in the 1920p Folder on the computer desktop.
(Change the name of the edited .sqpreset file so that it = DSLR [email protected])
Move the 1920p Folder from there to add it to the 1080p Folder, the location where you found the original .sqpreset file that you edited.
Close out of there.
5. Back in the Premiere Elements 12/12.1, manually set the project preset to the new project preset
6. When you import your 1080 x 1920 9:16 video file into the project and drag it into the Timeline, you should see
Note that there is no orange line over that Timeline content, indicating that you are seeing
the best possible preview of the image.
7. As I wrote before,
But, here is the hang up. If I render the Timeline content to get the best possible preview at the Edit level, the video in the Edit area monitor
squeezes in resulting in black borders to the left and right of the video image on screen.
But, otherwise I found I had no problems editing or exporting, just had to keep away from Timeline rendering for previewing after an edit. Need to find the missing ingredient for 100%.
I will be writing this up in my blog in a more organized fashion including how I got the project preset description in Change Settings to agree with the changes. Probably I will do that in the morning.
ATR

Error message when downloading Adobe Premiere Elements 11

When attempting to download the Adobe Premiere Elements 11 from the cd, I'm getting an error message that reads: "The installation process has encountered an error while installing Shared Technologies. Please restart your system and try again".I'm using a Windows 7 Operating System. When I attempt the download again, I get the same error message.

Curtis Baughman
Many of us have encounted this issue. The problem is not confined to a particular version or computer operating. Many homemade remedies and scientific ones have worked for some and not others. The most recent fix was offered by an ID by the name of Maud Barbara and seems to have been the answer for that user and at least one more.
Maud Barbara's fix can be found at the end of the very long thread on the subject found
http://forums.adobe.com/thread/1121947?start=40&tstart=0
The rough Google Translate went
Hello
I had the same problem as you and I just d have the solution:
go to C / program files (86) / common files/OOBE
Rename OOBE by OLDOOBE
and your problem is resolved
You can reinstall the software
What worked for me in this case was none of the above. How I and others navigated this installation problem is documented in the thread cited.
We look forward to your results to see what turned out to work for you.
Thanks.
ATR

No Disk error in Premiere Elements 13

I am getting the following error: "There is no disk in the drive. Please insert a disk into drive\Device\Harddisk1\DR1." If i click continue about 5 times the box disappears & I can continue working. The same thing occurs at random when i am attempting to do different operations with the same result. I can work within the program, however the constant error message is annoying. I have searched these forums & tried the different methods of uninstalling & reinstalling, deleting the recommended files, & running a Ccleaner. I can't find any other recommendations on this problem. Please help!

Geewiz1955
Premiere Elements 13 on what computer operating system? For now, assuming Windows 7, 8, or 8.1 64 bit.
What is your computer drives arrangement? How many removable drives do you have, and what are their drive letters?
See Computer/Manage/Disc Management.
Reports of the problem that you are describing can be found for Premiere Elements many versions.
Back in 2012, the word was to use Cancel and wait for an answer from Adobe who was working on the problem.
In 2013, the cause and effect seem to target the SmartSound feature....SmartSound feature is gone in Premiere Elements 12 and 13.
Microsoft and some visitors to this forum suggest getting to the core of the problem through drive letter changes for some removable drives.
Did you install Premiere Elements 13 from installation disc or from installation files from online download? I favor the uninstall/ccleaner run through/reinstall with antivirus and firewall(s) approach to getting rid of the issue. But, problems with the same symptoms can (often do) have different causes.
More later.
ATR

No Disk Error for Adobe Premiere Elements 12

I installed Adobe Premiere Elements 12 to my PC. Everytime I load the software, I get this annoying alert saying that there is no disk located error. I can get it to go away if I click on try again a bunch of times, but I want to get rid of this problem. It should NOT be happening. SOME BODY TELL ME WHAT TO DO PLEEAASE!

Blue Mask
Please check out recent thread which sought to solve the disc error message that appears to be similar to what you are reporting
http://forums.adobe.com/message/6246049#6246049
There was no definitive answer. Still waiting for follow up to the latest line of questions in that thread.
Suggestions about this being a long time issue are a bit misleading. In versions of Premiere Elements earlier than 12, there was a SmartSound/Sonicfire Pro 5 feature which appeared to be linked to the disc error message. And, updating SmartSound/Sonicfire Pro 5 was claimed to be the cause and remedy for the disc error message.
http://forums.adobe.com/thread/1300410
However, SmartSound/Sonicfire Pro 5 is no longer a feature in Premiere Elements 12. Premiere Elements 12 does have a Music Score feature, similar in principle to SmartSound soundtracks, but the SmartSound feature is gone in version 12.
Please review that information in the link above and let us know if any of it works for you.
Thank you.
ATR

"No Disk" Error (premiere elements 11)

I have successfully installed Adobe Premiere Elements 11 on my PC:
     Dell XPS 8300
     Intel Core i7-2600 Quad Core (3.4 GHz, 8MB Cache)
     • 1GB Radeon HD 6450 Graphics
     • 16GB DDR3 1333 RAM
     • 1TB 7,200RPM Hard Drive (2 x 500GB RAID 0)
     • Windows 7 Home Premium 64-Bit
When I open the application and click "New Project" I get the following error message:
AdobePremiereElements.exe - No Disk
There is no disk in the drive. Please insert a disk into drive
     \Devices\harddisk2\DR3
I can "cancel", "try again", or "continue". The only thing that works is to hit "cancel" (several times). Premiere Elements will then open, but the error message will keep recurring.   Adobe Support (Chat) has not been much help.
Anyone else come across this? This seems to be a common error in earlier versions (version 9), but I can't seem to find any good solution to it.   HELP!!!!
UPDATE:   Just as an FYI..while it's possible (but doubtful) there is preloaded software interfering, there is no other software (or viruses) installed on this computer.
Message was edited by: [email protected]

Boomps, I installed from here and it worked fine:     http://helpx.adobe.com/premiere-elements/kb/installing-smartsound.html There are even step-by-step instructions. Good luck.
Date: Mon, 7 Jan 2013 04:46:21 -0700
From: [email protected]
To: [email protected]
Subject: "No Disk" Error (premiere elements 11)
    Re: "No Disk" Error (premiere elements 11)
    created by BoompsXXX in Premiere Elements - View the full discussion
Not an answer!! I am new to this. I get the same error message and from what I can gather reading the traffic, I have to reinstall Smart sound. Can anyone help a simpleton. I searched the DVD for all files referencing Smart sount, there is plenty. I don't really understand how I reinstall and what??Any help would be great!!ThanksTara
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4973936#4973936
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4973936#4973936
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4973936#4973936. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

No disk error in Premiere Elements 12 - Smartsound plug-in?

I have a fresh install of Premiere Elements 12 (with 12.1 update) on a new computer and receive the error "There is no disk in the drive. Please insert a disk into drive E:" whenever the program is opened or closed. I can bypass this message by repeatedly clicking "cancel". Windows application logs in event viewer lists a corresponding error message "Activation context generation failed for C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\SmartSoundAdobePlugin64.prm". I confirmed that this file does not exist.
A forum search indicates that installing Smartsound resolves this no-disk error for PrE 11 and earlier but that Smartsound is no longer a feature in PrE 12:
Re: No Disk Error for Adobe Premiere Elements 12
But another other user reported that the no-disk problem went away in PrE 12 after installing Smartsound:
Re: "No Disk" Error (premiere elements 12)
And my event viewer error message indicates that PrE 12 is looking for a Smartsound plug-in which was not included in the installation. (PrE 12 was installed via Dell Digital Delivery and did not include an installation disk.)
So why is PrE 12 looking for a Smartsound plug-in if it is no longer a feature? Any suggestions for suppressing the no-disk error other than installing Smartsound? I'm just getting started in PrE and don't need it right now.
Thanks,
Greg

Thank you for the advice. I tried Han's suggestion of installing Smartsound SonicFire first since it was much quicker than completely reinstalling PrE (which entails many hours of re-downloading on a DSL line for the program & cloud content).
After installing Smartsound, the "SmartSoundAdobePlugin64.prm" file did appear in the C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\ folder. However, it did not resolve the "No Disk" error or the application error logged in Event Viewer. The source of that error is listed as "SideBySide" and Event ID is 33. The full text of the message is as follows:
Activation context generation failed for "C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\SmartSoundAdobePlugin64.prm". Dependent Assembly Microsoft.VC90.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type=" win32",version="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.
I did a bit of research and this answer suggests that the error is the result of an incompatibility between the installed version of Microsoft Visual C++ and the version used by the program:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/event-id-33-so urce-side-by-side/ef67e34f-07b2-4d52-a807-f9f81a7c32f8?auth=1
Based on this Microsoft article, it appears that the missing C++ 2008 version 9.0.201022.8 is an IA-64 version while the 9.0.30729.x versions on my machine are x64 versions:
http://support.microsoft.com/kb/973552
This is all way over my head and I may leave well enough alone until I have more time to spare, given that the "no disk" error (which could even be entirely unrelated) is annoying but not crippling.
FWIW, the machine is a Dell XPS8700, Windows 8.1, 64-bit, and PrE was sold by Dell it, bundled with Photoshop Elements.
Greg

"No Disk" Error (premiere elements 12)

When making an Auto Movie in pre12, as soon as i click the next button having selected the theme that I want, I get (No disk in drive D:), but if I eject the empty tray and leave it open all works fine.

Han
It does not make sense.
The SmartSound/Sonicfire Pro 5 feature is gone in Premiere Elements 12 and has been replaced by Music Scores which is in concept like SmartSound but is not SmartSound.
I think that your happening was by chance.
Recently I had a strange No disc situation. Never had one as long as I have been working with Premiere Elements products 4 to 12 over more than 10 years.
I decided to install CONTENT for Premiere Elements 10 on Windows 7 64 bit. After all was done apparently successfully. I started to use the program and went to apply a disc menu. That is when I got hit with the No disc message. I could not get rid of it. The only thing that would allow me to continue in the disc menu location was to insert the Premiere Elements 10 CONTENT disc which seemed unreasonable since all the CONTENT could be seen saved to the computer hard drive where it was supposed to be.
I decided to restart the computer for one reason or another. Immediately after the restart, there was no problem applying the disc menu in Premiere Elements 10. I did not have to work with the Premiere Elements 10 CONTENT disc in the burner tray to get my Premiere Elements 10 disc menus applied.
This one computer before and after this incident had SmartSound programs on it related to many earlier Premiere Elements versions that are on this same computer. So, SmartSound features or files did not appear to be implicated here in this No disc matter.
So I would caution you about a jump to judgment on
but somehow still looking for those smart sound files...
Please consider if there are any alternative explanations for your results.
Thank you.
ATR

Runtime error in Premiere elements?

runtime error in premiere elements

uvagreg11
You will need to supply a lot more information than just "runtime error in premiere elements" in order for us to help you.
1. What version of Premiere Elements are you using and on what computer operating system is it running?
2. What are you using a the project preset for your project? And, what are the properties of the source media that are being used on the Timeline?
3. Is this a "it worked before but now" or "it never worked before" type of problem?
4. What is the description of your computer and its resources?
5. What troubleshooting have you done so far...
a. flushing preferences
b. deactivation, uninstall, reinstall
c. other
The following is an Adobe document on run time error troubleshooting.
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Let us start here and then decide what next based on your details.
Thanks.
ATR
Add On..I did not see SG's post until after I had posted mine.

Installation problem with Adobe Premiere Elements 10

I recently purchased a copy of Premiere Elements 10 (With photoshop elements) and I have come to brick wall in the installation. First off, I have already installed photoshop and its working fine, however when i try install Premiere i get the following message:
"This installation package is not supported by this processor type"
I can confirm that my processor does infact meet the system requirements. It is faster than 2.0 GhZ and does support SSE2.
My exact model is: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06 GhZ. I can can see from the following link that it supports sse2
http://www.cpu-world.com/CPUs/Core_2/Intel-Core%202%20Duo%20E7600%20AT80571PH0833ML%20%28B X80571E7600%20-%20BXC80571E7600%29.html
I am also running Visata 32bit with about 4 GB of ram.
Any Help would be great.
Many Thanks
Chris

This software came with hardware that was other than a PC. Therefore they cant really help me, however i'm trying to download the trial version but my internet connection is less reliable than a plumbers estimate. It may take sometime, if that fails ill have to call T/S, i have a UK based number to call if the trial fails to work. Thank you all for your suggestions so far

Problem with Adobe Premiere Elements 11

Hello
Need your advice .
Problem Description:
Adobe Premiere Elements 11 (BOX)
After adding any the timeline material ( pictures or music or video) , 2-3 seconds hanging.
Then closes without any notification.
This program gave me a friend, not for need. He used it to me.
By not knowing at first I installed a Pr, and then my friend temporarily deactivate the license .
In the "Help" menu is available only " Deactivate" ...
It is a problem with the activation or something else?
Hardware:
Operating system Windows XP 32bit sp3
3GB RAM
Processor Intel Q8300 ( 4 cores )
motherboard Asus P5P41TD
video card nVidia GT220 - Latest drivers
Direct X 9.0c
Software:
last QuickTime
microsoft visual c + + 2008 redistributable
microsoft visual c + + 2010 redistributable
net framework 4
net framework 3.5
net framework 3.5 language pack
k-lite codec pack full
Help please .

-What model of camcordder is your video coming from and what format and resolution is it?
I tried to add a video with the two devices.
Samsung HMX-H300
Video settings added to the project:
Video: MPEG4 Video (H264) 1280x720 50fps 12009kbps [V:
HMX-H300 [eng] (h264 main L4.1, yuv420p, 1280x720, 12009 kb / s)]
Audio: AAC 48000Hz stereo 127kbps [A:
HMX-H300 [eng] (aac, 48000 Hz, stereo, 127 kb / s)]
Used settings:
PAL-AVCHD-AVCHD LITE 720p50
The same thing happens and another video.
Sony DSC-H5
Video settings:
Video: MPEG1 Video 640x480 30fps 104857kbps [V: mpeg1video, yuv420p, 640x480, 104857 kb / s]
Audio: MPEG Audio 32000Hz mono 64kbps [A: mp2, 32000 Hz, mono, 64 kb / s]
Used settings:
DSLR-480p-DSLR 640x480p50
the same result.
-How did you get the video from this camcorder to your computer?
Files are copied to the flash card to the HDD.
-Have you ensured that a video clip from this camcorder is the first clip on your timeline so that the program can match its project settings to your video specs?
Yes. Video clip from this camcorder is the first clip in the timeline.
Parameters of the project and the video above.
-When your project settings match your video specs, you will NOT see a yellow orange line along the top of the timeline, above your video clips, in Expert mode. Is this the case with your project?
No. I suspect that the problem occurs in the video is displayed on the timeline.
Because the assets of the project and put the video thumbnail is displayed on this video.
at the time of the drop on the timeline displays only rectangular frame that meets the duration of the video itself. let go of the mouse button. Displays only the blue rectangle.
Thumbnails of the first and last frames do not appear. takes 2-3 seconds and Pr closed.
I believe that until you see the yellow line is not reached.
-Have you ensured that any photos you use are sized to no larger than 2000x1500 pixels in size?
Yes, size is not more than 2000x1500
- You're using a somewhat antiquated 32-bit operating system that can make limited use of your RAM load (which may explain why you only have 3 gigs of RAM), so you'll need to optimize your workflow by matching project settings to your video as closely as possible in order for the program to work effectively and stably.
yes, you're right. need to upgrade to 64bit. so I put 4GB of RAM, but I can not install 64bit Vindovs. no time. and available only 3.25 GB.
I would add, I hope it will help isolate the problem.
I've been tracking work in process monitor Pr. the very moment when it closes when you move the video on the timeline.
begins after the closing lines
Registry
RegOpenKey
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ContentAnalysisData.dll
Before doing so, refer to
File System
C:\Documents and Settings\All Users\Application Data\Adobe\Premiere Elements\11.0\Online\DVD Templates\All_Lang\General\(A) Fun\it_IT_FUN_PAL_S_SM_OUTPUT_s_prv_sm.png
and the like ...
I turned drvatson. now the error appears as a window.
System disk, and on which stands Pr error checking. there are no errors.drive on which stands Pr error checking. There are no errors.

Adobe Premiere Elements 10 with Photoshop Elements 9

Is it possible to use both Adobe Premiere Elements 10 with Adobe Photoshop Elements 9?
I don't want to upgrade Adobe Photoshop Elements 9 because has not enought new functions but need new Premiere with Organizer.
Does Adobe Photoshop Elements 9 will work correctly with Organizer of Premiere 10?

Hi,
It is possible to use both of them, seperately though. If you wish to do use some interoperable feature, that wont be possible, since, as Steve said, they both use thier respective organizer.

Adobe Premiere Elements 9 has encountered a problem and needs to close.

Adobe Premiere Elements 9 has encountered a problem and needs to close. Asked to be debugged no response an then the program don not respond.
If i Run an old project direct from the file PE 9 it works and then go to a new project it works but from the start up it just closes down.
Bridge is also starting to do it

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Premiere elements 12 won't run

Hello.
I have an issue with my Adobe Premiere Elements 12.
Purchased bundle Photoshop Elements and Premiere Elements year ago and installed with no problems.
Did not use Elements till now and when run it, it requested log in to Adobe account which I did, asked for my incense which I added but after that it started from the very beginning asking for logging in etc.
So I un-installed it and re-installed. No issues whatsoever. Then asked to provide license detail, everything ok. When pressed Accept T&C the Premiere shuts down.
When restarted the same thing happens - it asks for license then shuts down. I can't make it run.
-PremiereElements_12_LS26_win64
-Win 7 Home Premium 64bit.
Can anyone comment on this one?

reset your preferences -
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if you reset and that fails, uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.

Photoshop/Premiere Elements 10 installed but won't run past Welcome screen

I bought and downloaded Photoshop Elements 10 and Premiere Elements 10 for Windows 7 - 64 bit on Dec.31/11. There were no error messages in the download, although the Akamai downloader screen didn't seem to show 100% before proceeding to the next step. Everything appeared to install correctly (it's a long process!).
At first, clicking on the desktop icons or the Start Menu list would bring up the Welcome splash screen, where the broad options (Organize, Edit, New Project) were shown. However, clicking on these options had no effect at all. Eventually even the Welcome screen wouldn't appear. I checked the Windows task manager and no applications were running.
I checked the shortcut properties and noticed that there was a separate executable in the target directory (eg. existing link was to "Adobe Premiere Elements 10.exe", but there was also a file called "Adobe Premiere Elements.exe"), which did run...however, I couldn't launch the Organizer from that program, and the "Home" link to the Welcome screen didn't function either.
With thousands of these programs being downloaded, I'm surprised that this serious glitch hasn't surfaced before. Any ideas?
Thanks!

There are three different programs -- Photoshop Elements (PSE) which is for editing bitmaps, Premiere Elements which is for video editing, and the PSE Organizer which is for cataloging your media.
I don't like the sound of that Akamai downloader not registering 100%.
Uninstall all the Adobe products, reboot, and download the installation package again. Check the Properties on that downloaded file and "Unblock" it if Windows has flagged it as "possibley harmful and coming from another computer" before starting the installation.
Ken

Newly installed Premiere Element 13 won't run.

I just installed Premiere Element13. The program launches but when I select either "New" or "Existing" project, a pop-up will show with the message"Adobe Premiere Element.exe - No Disk" "Please insert disk in drive D". The pop-up cannot be dismissed and the program is stuck there and won't even close. I have to go to Task Manager to end it! I am running Windows 8.1, i5 4670K CPU, 8G RAM, 1T HD with DVD burner. Any suggestion?

Heliossss
I just installed the purchased version of Premiere Elements 13 on Windows 7 and 8.1 64 bit. Interesting....
1. Beyond the usual, there seems to be a problem with this version's Interpret Footage and Properties readings for the .mod widescreen 16:9 file
Premiere Elements 13 Major .MOD Widescreen Concerns
2. With the Sept 2014 tryout there was a video transition named Funnel which is not there now in December 2014 in the
purchased version.
3. In the Sept. 2014 tryout, there were 2 new Movie Menu themes in the Kid's Corner category (Recital and Back to School). They
are not there in my December 2014 purchased Premiere Elements 13.
4. There are some reports about some .m2ts files having no sound only in the Elements Organizer 13 player. More news on that.
This just might be a problem with AC-3 (Dolby Digital) support in this particular user file in the Elements Organizer 13 player. If you run into this type of issue, please let us know.
But, right now all is moving along nicely. Hope all is going well there.
Best wishes
ATR

Premiere elements 10

Similar Messages

Maybe you are looking for