Premiere elements 11- PitchShifter not working?

Pitch shifter in Premiere elements 11 is not working as good as it was in Premiere elements 7. Here's some of my issues:
When I change the pitch, the end of the audio is cut off/out of sync
When a clip is short, the audio won't play if it has the pitch shifter effect
When I split a clip with pitch shifter applied, the audio skips
I would like it if the pitchshifter would be more like the one that was in premiere elements 7.

Two questions... does your project match your video?
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
And, just what are you editing?
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Similar Messages

  • My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

    My serial number for adobe photoshop elements 12 and premiere elements 12 does not work.  On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9.  I have purchased those products in the past, but just recently upgraded to elements 12.  I can use the the photoshop organizer, but can't open the photoshop editor.

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • Redemption code for Adobe photoshop/premiere elements 11 does not work

    redemption code for Adobe photoshop/premiere elements 11 does not work

    I am having the same issue except that my premiere elements code worked great, but the photoshop elements key failed. Ugh.

  • Premiere Elements 10 Transitions not working

    I have added cross disolve transitions to Premiere Elements 10, and tried increasing duration, but does not seem to work (just vague blurring).  I have recorded to DVD to see if transitions visible, but to no avail.
    I have been successful in Premier Pro 4 and Serif X5, but wish to use Premier Elements as easier to split timeline and make cuts (tedious in PremierPro 4).  Can't afford Premier Prof 5!!
    Downloaded from Canon HV 30 HDV camcorder.  Over 20 hours of video to edit!
    Any suggestions?

    Welcome to the forum.
    There can be several reasons that a Cross-Dissolve (or some other Transitions) might not work.
    One of the most common is that the user just makes a Cut, but does not alter the footage, and when they place the Cross-Dissolve over that Cut, there is not change, as the Frames have not changed.
    The next is when one adds a Cross-Dissolve between Clips, that do not have adequate Handles, extra Frames, that are necessary for the Transition to function properly. This ARTICLE goes into more detail on Handles.
    Do either of those situations have anything to do with what you are experiencing?
    If not, can you post a screen-cap, showing the Clips, to which you are having issues with the Cross-Dissolve Transitions, and tell us exactly what you have done, prior to the addition of the Transition?
    Good luck,
    Hunt

  • Link for Adobe Premiere Elements 11 will not work. Any help please?

    I bought my Premiere Elements package from another seller which gave me a link to download from Adobe. The product key thing is legit but every time I click on the file link for windows, my laptop comes up with this message: "The file archive of Adobe Premiere Elements 11 is missing. You need all parts in the same folder in order to extract Adpbe Premiere Elements 11. Please download all parts."
    What does this mean??? Can anyone help me??? Please!

    it means you only download of the 2 needed files.  there are files 1 of 2, and 2 of 2.  you need both.  try again.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Premiere Elements 12 Download not working

    I downloaded Photoshop Elements and Premiere Elements 12 from Amazon. The Photoshop portion of the download works great, but the Premiere Elements portion doesn't show up as downloaded. I've tried the set-up and it says it needs the 64-bit version; I've tried the adobe set-up, and it only downloads the Photoshop portion. Any ideas what I'm doing wrong?

    Hi fedch,
    Kindly specify OS version that you using so that we can help you appropriately.
    To download please try : http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
    Run Adobe Download Assistant:
    Choose "Video" under "All products"
    Download Premier elements from Product you may like".
    Troubleshoot compatibility mode : Make older programs run in this version of Windows - Windows Help
    Thanks,
    Atul Saini

  • Adobe premiere Elements 12 will not open editor

    I had Adobe Premiere Elements 11 on my laptop and worked fine. Decided to upgrade to Elements 12 and did but version 12 will not open editor, says sign in, I sign in but no editor. Organizer opens and loaded my Photos and videos. I purchased full retail version for download. My laptop runs windows 8.1 and has an Intel Core i5 dual core processor and 4GB ram.

    actll
    Have you gone to Computer/Manager/Event Viewer/Windows Logs/Applications and looked for error entries that appear to be associated with this problem?
    Did you purchase Photoshop Elements 12 as well as Premiere Elements 12, and does Photoshop Elements 12 Full Editor open whereas Premiere Elements 12 will not open to its Expert or Quick workspaces?
    You have probably tried it, but can you open to the Premiere Elements workspaces from the Elements Organizer workspace?
    More later.
    ATR

  • Adobe Premiere Elements 12 Is Not Opening (Need Help ASAP)

    Hello,
    I tried to start up the program and it won't start. Previously, I would have the problem of my software not starting when I clicked on the icon. I found a way to get around that, but now it isn't starting at all. I tried uninstalling and reinstalling the program and nothing has changed. All I get now is a pop-up box that says  that the program has stopped working. I really don't know what to do!
    Computer Information:
    Windows Edition : Windows Vista Home Premium  2007
    Computer Type: Sony Vaio
    Processor: Intel(R) Pentium(R) Dual CPU T3200 @2.00GHz
    Memory (RAM): 3.00GB

    taylor_peterson92
    You realize that you are not using Premiere Elements 12/12.1 optimally on Windows Vista be it 32 or 64 bit. You still have a Premiere Elements 12/12.1 32 bit application which has computer resource issues when trying to get a larger project taken to completion successfully. With the 32 bit system, the maximum supported installed RAM = 4 GB, typically with 3.2 to 3.0 GB or less of that available. And, you appear to have only 3 GB RAM to start with.
    It sounds like it may have worked before from what you wrote. How long ago did it work? And, what was your last activity in a project before you could no longer get the program to open. Are working with a home computer or is this computer part of a company network?  In your present computer environment moving to Premiere Elements 13 is not a choice since Premiere Elements 13 does not support Windows Vista 32 or 64 bit.
    You could go through the usual drill
    a. Latest version of QuickTime installed on your computer with Premiere Elements 12/12.1?
    b. Running program from a User Account with Administrative Privileges?
    c. Video card/graphics card up to date according to web site of the manufacturer of the card?
    d. Does problem exist with and without the antivirus and firewall(s) disabled?
    e. Where do you have the Scratch Disks directed and how much free hard drive space is at that location?
    f. Did you install the program to the default location on the Local Disk C?
    What was your way of getting the program to work previously when problems developed?
    Let us consider the above and then we can decide what next.
    Thank you.
    ATR

  • "Adobe Premiere Elements 13 has stopped working"

    I got a copy of Premiere Elements 13 on "Black Friday" (one month ago).  I am using stabilization and sometimes get "Adobe Premiere Elements 13 has stopped working".  I have been guessing at the problem and run several experiments - one being; stabilize a clip in it's own project and create an MP4 to use in the final project.  The latest clip seems to render fine, but crashes on playback (sometimes this happened on version 12 but not so consistently and often.  I'm running 64 bit Windows 7 Home Premium, with 6GB RAM, 3.30GHz, Intel Core i3 - 4 core processor.  I use two monitors with the built-in video hardware.  Rendering max's out all four cores while stabilization taxes the RAM.  Where can I look to find out more details about this problem (only guessing with anything less)?  Thanks for the help.

    Ray
    Thanks for the reply with further details and results.
    The generalization is that you (manually) or the project (automatically) sets the project preset to match the properties of the source media.
    But, if you have more than one format to import, you can still import that "atypical" format into the project (a project cannot have more than one project preset). But, the Shake Stabilizer will not stabilize it since it's properties do not match the description of the project preset. You can easily understand this by looking at the description of the project preset that has been set for the project and comparing it with specification of your video source. But, I have not yet found that such a situation creates a project/program "stopped working" as in shutting down the project/program.
    I suspect a major factor when you run into a Shake Stabilized induced project/program shutdown is computer resource demands of the feature for the video which is requiring the stabilization. And, I have found that the stabilization times can be long.
    Consequently, if the Shake Stabilizer does not cause the project/program to shutdown when asked to stabilize a video clip (without other effects). I am very guarded in the outcome, especially stabilization times, when the Shake Stabilizer is asked to stabilize a video clip to which other effects have already been applied.
    We will looking forward to your results.
    Thank you.
    ATR

  • Premiere Elements 12 will not allow me to add any more 'Default Text'

    Premiere Elements 12 will not allow me to add any more 'Default Text'. Being using it fine up until today! Created over 80 words so far for subtitles but for some reason it wont allow me today!!!

    Dave
    Thanks for the follow up. Interesting result.
    What is the specific Music Score that you used in the Premiere Elements 12/12.1 Mac Soundtrack that was limiting you in the number of words that could be included as text in the project's opened Titler?
    Please confirm
    a. Working in Expert workspace or Quick workspace?
    and
    b. Was the 12.1 Update in effect before and after you observed that the Music Score soundtrack removal resolved the issue of number of words limit in the Titler?
    and
    c. Did the Titler problem exist if you replace the Music Score soundtrack with a non Music Score music file?
    and
    d. If you moved the Music Score soundtrack to one of the numbered Audio Tracks, did the Titler problem exist?
    If you have no Music Score soundtrack in the project, create your title of 80 plus words in the Titler, close the Titler, and then bring the Music
    Score soundtrack to the project's Soundtrack, does that strategy work for you?
    The above information will help me to think about what happened in your case and give me more insight into how to prevent it happening to
    you in future projects.
    Thanks.
    ATR

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • Adobe premiere elements 13 has stopped working message

    Every time I open adobe premiere elements 13 and download any form of media, in about every 2-3 minutes when i'm editing my video, A message will come up stating that "Adobe Premiere Elements 13 has stopped working." It forces me to close the application. I went to a computer expert and he said that my computer meets all the requirements of the software and even exceeds some of them since it's only 2 years old. Why does this keep on happening to me and how do I fix it?

    senseimike
    Premiere Elements 13 on what computer operating system?
    Have you updated 13 to 13.1 using an opened project's Help Menu/Update? If not, please do so.
    Now the usual drill questions...
    1. Do the problems exist with and without the antivirus and firewall(s) disabled?
    2. Are you running the program as Administrator?
    3. Are you using a pen and tablet device instead of a mouse?
    4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card. According
    to the Device Manager/Display Adapters, how many video cards/graphics cards is your computer using? Are you running
    a multi- monitor system?
    5. Is the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1?
    6. What are the properties of your source media including file extension and duration? Knowing brand/model/settings of the camera that
    recorded the videos is probably the quickest way to get at that needed information. What project preset are you (manually) or the project
    (automatically) setting?
    7. What specific edits are you doing in the project when the program crashes/shuts down? Is there any consistency to the "stopped working"?
    You talk about every 2 or 3 minutes in the workflow. But what is the size of the project by the time the problems set in....2 or 3 minutes
    from the time you started the project or 2 or 3 minutes after you have been working on the project for 10 to 90 minutes?
    Please review and consider the above, and then we will decide what next.
    Thank you.
    ATR

  • Adobe premiere elements 12 will not open keeps crashing

    I am on a mac using osX 10.8.5 and my program will not open. It just keeps crashing. i have tried shutting down my computer several times but it will not work. The Organizer seems to to work but not the Video editor and it shuts down when i click "new project" any ideas anyone?
    i'm on version 12

    Hi Jacquima,
    Welcome to Adobe Forums.
    It seems like Premiere Elements 12 is not activated properly.
    Please open the finder window and click on go and choose computer.
    Navigate to the below path then
    MacHD>Library>Application support>Adobe
    Rename the files SLstore and Slcache to Slstore.old and Slcache.old respectively.
    Launch Premiere elements 12 again it will prompt you to enter your Adobe id and password and then the serial number.
    By following the above steps you will have to reactivate your Adobe products. Make sure you have no other Adobe product.
    If you have any other adobe product installed make sure you have the serial number for that.
    Thanks

  • Premiere Elements 10 has stopped working

    Actually it has not worked yet.
    I just installed the Premiere Elements 10 -  again, followed all the details.
    My laptop is Acer Iconia 6102 dual screen touchbook
    Windows 7, Intel Core i5 CPU M480@ 2.67GHz, sys mem= 4gb
    Toshiba MK6465GSX disk drive, Intel HD Gaphics
    The computer is new.
    The dialogue says that Premiere Elements 10 has stopped working and will shut down.

    This machine has only the one drive listed, nothing hidden. 512 gb free, removed some unecessary files. I did manual updates for the hardware and all software, everything is up to date. Went through the preceeding steps. There was no need to scan suorce files, I have nothing uploaded. The program will not complete its startup. The splash page pops up,dialogue flashes all the drivers and files being loaded, then quits. Does not open. The Organizer opens, but I still cant get PE to open thru it either. My computer wont allow me to change resolution. Could the fact that this machine is touch screen, dual display have anything to do with it? Using up too much resources? The resuorce monitor is idle @ 0. My Windows Movie Maker works fine.

  • Premiere Elements 4.0 stops working when adding a title

    Whenever I add a title, it quickly goes to "Adobe Premiere Elements.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
    What to do? Thank you in advance for any input on the matter.

    Let me premise my responses by, Prem Elem had been working fine and this issue just started not too long ago
    Processor: 3500+ AMD Athlon 64 processor
    RAM: 1GB    Free? Not sure what you mean.
    Defrag space: just analyzed. All ok
    OS: Vista, not sure if fully updated...need to check
    QT: just updated
    Camcorder: Panasonic PV-GS80
    Proj Settings: Not sure what you mean, "New Project?"
    I'll make sure Vista is updated. Thinking about getting more RAM. It does say 1GB for on the "System Reqs" for Prem Elem
    Thanks

Maybe you are looking for