Premiere Elements 11 -- Visual C++ Runtime Error when trying to add Movie Menus

Premiere Elements seems to be working fine in all reapects, except when I try to add Movie Menus, nothing shows up in the Movie Menu area, and eventually I get a Visual C++ Run time error as shown in the attached image. When I click OK, the program crashes. This is repeatable.
I am running Windows 7 with latest Service Pack. I am running dual GeForce cards, with the latest drivers. No other software is giving me any issues.
Any suggestions?
Thanks,
Nick

Steve,
Thanks for the reply.
I have my two graphics cards SLI sttings properly configured, and they have been working correctly for every other Premiere unctionality, as well as all of the rest of CS6 applications (and Lightroom). I have double-checked that I do have the latest drivers from nVidia's site.
I do have the latest QuickTime software.
I have gone in and updated all of the optional Windows updates.
I keep getting the same error, but I think I can describe it better.
When I go into the Movie Menu panel, the "Add a theme" link in the panel does not respond. When I click the Menu Theme button in the upper right corner of the Movie Menu panel, I do get the library of themes to select from, but when I select one, it does not load in to the panel. (It does download the content from online, though it doesn't show on the screen. I just see the "Add a theme" link in the middle of the page.) The Adjustments panel on the right is completely blank.
I can click the "Done" button to close the Movie Menu panel. But when I try to open the Movie Menu panel a second time, it crashes immediately and I get the error message from my last post in this thread.
I have repeatedly re-booted my computer, but I get the identical behavior. All of the other functionality of Premiere Elements still work.
If the next receommendation is to re-install the software, do I have to move my projects anywhere? Or do I just leave them and re-install?
Thanks,
Nick

Similar Messages

Portal runtime error when trying to create new Iviews in EP

Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AM

Krishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi

Runtime error when trying to use Thinkvantage system updater

I get a runtime error when trying to use the Thinkvantage system updater.Have tried it numerous times and this is the exact message:
"Runtime error!
Program:C:\Program Files\Lenovo\System Update\tvsu.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
Can somebody please help me to get the Thinkvantage system updater working properly?
Thanks-George
This issue has since been resolved.Thanks-G

I'm getting the same error. I tried reinstalling system updater but it didn't help.

I am getting a runtime error when trying to download itunes

I keep bgetting a runtime error when trying to download itunes

Not there aren't any special settings for this. You just use the Open In feature to save the document into Pages. You could have a font in the document that Pages doesn't like, maybe something that you copied and pasted from somewhere into the document that went corrupt. But there is nothing special about the way that you save a Word document into Pages. You save it like you save any document or file into a compatible app.

Has anyone got a "runtime error" when trying to search in itunes store?

has anyone got a "runtime error" when trying to search itunes store?

I assume since you are posting in the iTunes U for iOS forum that you are having issues with the IOS version of the app. What is the exact error message?
Can you participate in a course's discussion from iTunes U's Course Manager (https://itunesu.itunes.apple.com/coursemanager/)?

Ora 12154 error when trying to add a database to VS Server Explorer

Hi Everyone,
I get the Ora 12154 error when trying to add a database to VS Server Explorer.
How do I get around this problem.
The database service is running and I can connect to the database with pl/sql.
I can also tnsping the database and that is also ok.
Looks like a problem with the odp.net software.
I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
I am new to this stuff so please help me step by step.
Thanks.
Emad

Hi J. B.
I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
Anyway here is the VB coding I used. I'm new to this and still learning:
Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
Public Class Form1
' String to connect to the database.
Dim strConnectionString As String = _
"Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
' Associate the connection string with a connection object.
Dim objOracleConnection As New OracleConnection(strConnectionString)
' SQL query for returning data rows.
Dim strSqlQuery As String = _
"Select dname, deptno " & _
"From dept " & _
"Where deptno = 10" '
' Command object to make this query work.
Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' Identify what type of command is being used.
objOracleCommand.CommandType = CommandType.Text
Try
objOracleConnection.Open()
' Set up a Data Reader and load it with data.
Dim objOracleDataReader As OracleDataReader = _
objOracleCommand.ExecuteReader()
objOracleDataReader.Read()
' Convert the department number to a string.
lblDepartmentNumberFromOracle.Text = _
CStr(objOracleDataReader.Item("deptno"))
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
End Try
End Sub
End Class
I still want to thank you for the help you are providing.
Truly,
Emad

I am getting an error when trying to add a caption.

I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.
If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.

I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

8008 Error when trying to download movies from iTunes

I've searched Google and the discussion boards but no one seems to have a fix for the 8008 error when trying to download movies in iTunes. I have the latest version of iTunes, my Mac Mini is up to date with all of it's patches, I've tried deleting the movie in the download folder and redownload the movie but I still get nothing. Does anyone have any suggestions for a fix?
Thanks,

Morning pettis360,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Hope this helps,
Mario

Fatal error when trying to add derived table

Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

Hi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

TS3694 Hello, I have an error while trying to add move music into my itunes library. 'The itunes library file cannot be saved. You do not have enough previledges for this operaion? help - what does this mean?

Hello, I have an error while trying to add move music into my itunes library. 'The itunes library file cannot be saved. You do not have enough previledges for this operaion? help - what does this mean?

Hi luxmi01,
Here is some information and troubleshooting on the permissions issues you are seeing:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Cheers!
- Ari

Why do I get Microsoft Visual C++ Runtime error when I open Premiere Elements 11 on my windows 8 ?

Why, when I open Premiere Elements 11 on my windows 8, do I get"Microsoft Visual C++ Runtime error. This application has requested runtime to terminate it in an unusual way.Please contact the application support team for more information."
Any solutions, thanks, Jim B.'

jimmymega
We will follow up when you have time.
I am not sure if there is a misunderstanding in the communications. Please see
but how do I identify the "http://forums.adobe.com/message/5129399 ? Is there somewhere where there is the number 51229399?
When you click on that link, it should open to a thread with a discussion on troubleshooting the Microsoft Visual C++ Runtime Error situation. Did the link not open. It seems to be working. Please try clicking the link again and let us know the outcome.
Thanks.
ATR

Runtime error when trying to open photoshop elements

I need help getting into my photoshop elements. Purchased several weeks ago. Worked fine, then all of a sudden I'm getting "runtime error" when I try to open. Any thoughts?

Try re-generating the media database by renaming MediaDatabase.db3
See this link for further information:
http://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.html

I receive a Runtime Error when trying to go from Organizer to Editor. It reads: Microsoft Visual C Runtime Error....Runtime Error....Program c:/ (x....

When trying to go from Organizer to Editor, I receive a Ryntime Error. It reads: Microsoft Visual C++ Runtime Error. Runrime Error Program c:\(x....

I kept getting the same error message too! Thank goodness I'm not alone in this!

Microsoft Visual C++ runtime error when building installer

I'm trying to build an installer for a very simple VI I've created in 8.2. Before the build is complete I get a Microsoft Visual C++ runtime error message pointing towards the labview.exe file. I've already tried re-installing LabVIEW and deleting older versions of the LabVIEW Runtime engines with no luck. I recently upgraded my system from LabVIEW 6.1 and I'm using Windows XP. Any suggestions?
Thanks.
LabVIEW 2012 - Windows 7
CLAD

I included waveform storage, runtime engine 8.2, ni-visa-runtime and ni-serial3.1. I tried to create a setup.exe by installer on an other pc. But it's completely the same behavior afterwards. I attached the error message. This message appears after I choose the path and continue the setup. It's the question which file is meaning.
I tried to create a setup.exe by installer without any additional.
The strange thing is it was unsuccessful with following message. Maybe this will be helpful to find the problem.
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_BuildDevPart.vi >> NI_MDF.lvlib:MDFBuildDevPart_Open.vi
Attachments:
missing file message.JPG ‏15 KB

Premiere Elements 11 -- Visual C++ Runtime Error when trying to add Movie Menus

Similar Messages

Maybe you are looking for