Premiere Elements 11 won't start anymore ...

... after chashing the system, software asks to update the display driver - haven't change anything (Lenovo T500, win7). Windows say that the proper driver is used. Do I still have to change the driver? How to proceed? uninstall/reinstall the software?
wishes,
velimatti

This appears to be the same post, as this thread: http://forums.adobe.com/thread/1302335?tstart=0
To keep everyone from getting confused, I will Lock this one, and Copy Steve's Reply to the other one. Do see the FAQ Entry, that he links to.
Good luck,
Hunt
[Thread Locked - Duplicate Post]

Similar Messages

Premiere elements 11 won't start

I downloaded photoshop and premiere lements 11 in 64bit version for windows 7 without problem
photoshops runs fine
premiere will not start at all.
reinstalled and downloaded it again.
no action, no error, not vissible in the tasks
how to proceed

It is 64bit version
Met vriendelijke groet,
Kees Menken
Verstuurd vanaf GSM
Op 25 dec. 2012 om 16:53 heeft Bill Hunt <[email protected]> het volgende geschreven:
Re: Premiere elements 11 won't start
created by Bill Hunt in Premiere Elements - View the full discussion
From nVidia's Web site: http://www.geforce.com/drivers/results/54530
It appears that the GT 610 for Win7-32 (did not find if you have the 32-bit, or 64-bit version of Win7), there is one dated 12/17/2012.
Good luck,
Hunt
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4944266#4944266
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4944266#4944266
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4944266#4944266. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

My Premiere Elements 9 won´t start, it stars loading and then it stops.

After replacing two drivers (as Adobe told me to because wasn´t showing the preview of vids, just sound) my premiere elements won´t start. I replaced the files and didn´t start. Then I replaced those files with the originals that I saved just in case, but the same issue. Does anyone know how to start the program again?
Thank you.

More information needed for someone to help... please click below and provide the requested information
-Premiere Elements FAQ http://forums.adobe.com/thread/1042180
This is a user to user forum, not Adobe support... so nobody here knows what Adobe told you to do... you need to provide details
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
-If Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Adobe Premiere elements 8 won't start new project; crash reports

I just bought Premiere elements 8 and downloaded it, twice, because every time i try to start a new project a crash report comes up and the program closes. Can anyone tell me how to fix this?
Thanks!

Hi Alondra,
there is a separate forum for Premiere Elements at
http://forums.adobe.com/community/premiere/premiere_elements
I suggest that you look over there. They have a Premiere Elements FAQs section posted over on the right hand side of the thread listing. So I suggest that you look at those FAQs and if you don't find your answer there, then post in the main section of the Premiere Elements forum.
Also if your computer has a Nvidia video card there is a banner at the top of the forum with specific info.
Good luck.

Premiere elements 7 won't start

newbie here.not computer savvy. i have just purchased pe7. i have successfully loaded the file but when i go back to start program i get an error message and it must shut down. i've done everything according to instructions i.e. no anti virus or other programs running. i noticed that one of the requirements is windows xp service pack 2, i have servicew pack 3, could this be problem. any help would be appreciated.

I'm with John. The main reasons the program won't launch are:
1) Inadequate hardware. You should have at least double what Adobe lists as minimums. In particular, you'll not only need room on your hard drive to install the program but at least 20 gigs of free, defragmented space just to open it. (It's not that the program itself requires that much. But your operating system needs lots of paging space to run more intensive programs.) You'll also need two or three times that free space to do any video editing.
2) Outdated firmware. In particular, and outdated version of Quicktime. Your Windows Update doesn't always load all the necessary updates. Secunia's program can help you find out what else you need, per the FAQs to the right of this forum.
http://forums.adobe.com/thread/416585?tstart=0
3) Finally, there is the possibility the program didn't take on the first installation. Occasionally, when your system is updated and you have adequate hardware, you may need to uninstall the program and reinstall it to get it to run right.

Photoshop Elements 4 won't start anymore

I have been running Photoshop Elements 4 on my MacBook Pro since I purchased it in April. Just recently is stopped launching and I have tried all of the solutions I could find in the discussion groups with no success. I've deleted everything, repaired permissions and reinstalled both from my directory and from root with no success. Other users on this computer have the same problem. The console log shows the following repeatedly before it stops trying to launch.
2007-07-14 18:42:54.486 Photoshop Elements 4.0[256] CFLog (21): dyld returns 2 when trying to load /System/Library/TextEncodings/Chinese Encodings.bundle/Contents/MacOS/Chinese Encodings
2007-07-14 18:42:54.493 Photoshop Elements 4.0[256] CFLog (21): dyld returns 2 when trying to load /System/Library/TextEncodings/Japanese Encodings.bundle/Contents/MacOS/Japanese Encodings
2007-07-14 18:42:54.496 Photoshop Elements 4.0[256] CFLog (21): dyld returns 2 when trying to load /System/Library/TextEncodings/Korean Encodings.bundle/Contents/MacOS/Korean Encodings
2007-07-14 18:42:54.505 Photoshop Elements 4.0[256] CFLog (21): dyld returns 2 when trying to load /System/Library/TextEncodings/Unicode Encodings.bundle/Contents/MacOS/Unicode Encodings
Can someone help?
MacBook Pro 15 inch Mac OS X (10.4.10)

The only other thing I can think of (I tend to agree that the problem is with the font bundles, not with PE) would be to try deleting the font caches with a utility like Onyx. While you're in there, you might want to force run the maintenance scripts as well, but I wouldn't mess with other things OnyX can do, at least not yet. You can get it (free) from versiontracker or macupdate.com.

Premiere Elements 11 won't launch

G'day,
I downloaded the trial version of PRE11 a few weeks ago, but I couldn't get it to run. Upon launch I get the welcome screen with two choices, to launch the Organizer or the Video Editor, but neither of these actually start. It seems as it is trying though, as I see a scrolling line below my choice after clicking it. No error code or anything like it, it simply won't start (and I don't see any process starting either).
Nevertheless, a few days ago I bought PRE11 (Win/Mac DVD, English) and installed it. Exactly the same behaviour as with the trial, apart from one thing. When I try to lanuch the Video Editor I get the licence agreement. After agreeing, it's the same thing though, nothing happens.
I've read this thread (http://forums.adobe.com/message/4773135) and tried to see if I had any of the symptoms described, or if any of the suggested solutions worked. So far, no luck. I tried Large_Donkey's solution (http://forums.adobe.com/message/4893868#4893868) with the msvcr80.dll and msvcr100.dll files, but it didn't make any difference. Same thing with VDOsurfer's reply (http://forums.adobe.com/message/4903592#4903592) I also tried primarykeytech's suggestion (http://forums.adobe.com/message/4905283#4905283) and downloaded Dependency Walker and ran both Premiere Elements 11.exe and Premiere Elements.exe. At first, it reported that IEShims.dll and gpscv.dll was missing/couldn't be loaded, so I added these to the Premiere Elements folder. Then I got a message (still while running Premiere Elements.exe in Dependency Walker) saying that sysntfy.dll was missing, so I added this one as well to the Premiere Elements folder. After this, I still get three messages in Dependency Walker, but no further description on which files it can't find:
"Error: At least one module has an unresolved import due to a missing export function in an implicitly dependent module.
Error: Modules with different CPU types were found.
Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module."
And none of these changes made any difference, I tried to launch the Video Editor and/or Organizer, but it's the same thing; won't launch, no error message. I've now resetted everything back to the way it was on installation, and tried to continue finding any solution.
Some specs, even if maybe not all of these are relevant. If any other specs are needed, just inform me.
Motherboard: Asus P6T Deluxe V2
CPU: Intel i7 950 3,06GHz
PSU: Corsair HX 650W
RAM: Corsair XMS 12GB DDR3 2000MHz
Graphics: Nvidia/Gigabyte GTX 460
Sound: M-Audio Delta 1010LT
Drives: 2x500GB WD Black HDD (programs and data), 1x120GB Intel X25-M SSD (OS)
OS: Windows 7 Ultimate 64-bit
Monitor: Dell U2711
Thanks in advance for any help.

Well, I tried the blacklist approach by adding a "blacklist.txt" file to the VST plugins folders I have, but to no avail. I also read the last post you made in the "Failure of Premiere to Launch - One Possibility VST's" thread, with the answers from Adobe Engineering. As that post was made almost 2 years ago, I somehow think this wouldn't be an issue in PrE 11 anymore?
Anyway, while trying to launch Premiere Elements.exe ~200 times the last 24h, I've not noticed anything strange in Event Viewer, no errors or warnings connected to the launch of PrE (or, for that matter, no errors or warnings at all during the time I try to launch the program). One thing I did notice, though, is that the process Premiere Elements 11.exe actually starts (I chose not to display the welcome screen every time, but to launch the Video Editor right away) but then quickly terminates. Utually it manage to get between 15-20MB of memory before it crashes and terminate the process, only takes 1 or 2 seconds from launch to termination.
Slowly losing my hope to actually discover the cause, as I'm shooting in the dark evey time (not getting any error messages or hints on what actually fails). Really needed to use PrE this week, maybe have to find some free alternative on the interwebs.
Regards Henrik
Edit: Searching deeper on the Adobe forums regarding VST scanning issues with PrPro/E, and it baffles me how long this error seems to have been going on, even if it's not 100% certain that is the error in my case.
Edit2: Once again a shot in the dark, but I'm thinking my troubles may be due to multiple hard drives? As things are scattered over 3 discs (OS on one, programs on the second one and personal data on the third one) this might cause some path/reference issues? I was thinking this since Depencency Walker gives me the following error messages:
"Error: At least one module has an unresolved import due to a missing export function in an implicitly dependent module.
Error: Modules with different CPU types were found.
Warning: At least one delay-load dependency module was not found.
Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module."
And it also states that it can't find IESHIMS.DLL and GPSVC.DLL (a road I already have been down earlier). This got me thinking PrE can't find the correct files from where it is installed (E:\Program Files\Adobe\Premiere Elements 11). On the other hand, I'm getting the exact same error messages on Photoshop CS5 (which runs fine), and the same two dll files seems to be missing. Even tried running a few other programs that work, such as games, though Depencency Walker, and even they seems to miss these dll files.

X11 won't start anymore!

Hello,
this is a desperate call: I am at a conference with my MBP, (10.6.7, all updates done). I need Matlab for my presentation, which needs X11.
X11 (and XQuartz) decided that they won't start anymore: the icon bounces in the dock for a while, then sits there without the little light underneath, and X11 is "non responding".
The logs show something like this.
I have googled and searched: similar problems once in a while appear but no posted solution.
I tried:
1) reinstalling XQuartz (I would reinstall X11, but how? I do not have the disks with me, I am away!)
2) from an admin account
3) create a new account.
4) repair permissions.
5) reinstall the font update from Apple that was recently issued.
HELP PLEASE!!!
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: DISPLAY ("/tmp/launch-bHvQen/org.macosforge.xquartz:0") does not match our id ("org.x"), unsetting.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: main(): argc=2
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -psn_0_278596
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Waiting for startup parameters via Mach IPC.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Could not connect to server (DISPLAY is not set). Starting X server.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Launching /usr/X11/bin/startx:
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /bin/sh
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -c
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[2] = /usr/X11/bin/startx
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Scanning user font directories to generate X11 font caches
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Updating FC cache
11-05-16 5:02:01 PM     org.x.privileged_startx[20781]     font_cache: Scanning system font directories to generate X11 font caches
11-05-16 5:02:01 PM     defaults[20791]
The domain/default pair of (org.x.X11, dpi) does not exist
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Couldn't create cookie
11-05-16 5:02:02 PM     org.x.privileged_startx[20781]     font_cache: Updating FC cache
11-05-16 5:02:04 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Done
11-05-16 5:02:04 PM     org.x.privileged_startx[20781]     font_cache: Done

Here is the solution: there was nothing wrong with x11 per se!
The problem was that about 30 files in /usr/bin (like gzip, egrep, hexdump etc) had been hosed (they had 0 file size). The puzzling messages was due to the fact that startx uses hexdump, which was simply silently doing nothing (since it had 0 size!).
I do not know what or when these files were zeroed: I suspect a recent OSX update which did not complete and I had to forcefully reboot.
I have fixed it enough to work (copying those files from another mac), but who knows what else lurks beneath the surface of apparent serenity!
I am actually surprised that the whole system did not stop functioning completely.
MORALE: if something looks strange in the logs with x11 or other apps, check the file sizes in your /usr/bin, you may be surprised too!

Photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I jus

photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I just uninstal and then re-instal (without losing my spare licence that I want to use elsewhere) It is a PC not a Mac

See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows

Adobe bridge won't start anymore. Icon is hopping and then it shuts down..

Could someone help me with this. After trying to install output module in bridge cc, bridge won't start anymore. The icon is hopping for a few seconds and then the appllication is shut down.

Oh ok - Thankyou for that. I will be ringing them tomorrow and I will not be happy ! And I'm hoping they can suggest what I'm suppose to do about getting it back to them as I can't take it in myself. SO so angry!!! Does people getting it back in a worse state happen often? :| do read these discussion boards? I hope they do!!!

Mega Player 538 won't start anymore

I just flashed the firmware of my mega player 538 to the latest 1.11.03.
The prosedure went ok but now the player won't start anymore.
When I press "Power On" -button nothing happens.
Is there anything that I can do or is the player gone...?
Can I reset the player to solve the problem?

I contacted MSI support, but no answer from them yet.
Unfortunately I didn't have time to wait because I had a very important affair where I needed the device.
So, I returned the player to the shop. Of course the shop didn't have replacement on the stock but they gave me my money back. So, I went to another shop and bought a creative player instead and I was able to complete my affair.
It would have been nice to have the problem solved because the player was perfect for my needs and was very cheap as well (only 20 euros). The new player was three times more expensive and only 512Mb storage.
If MSI will return with a solution I can post it here in case somebody else has a same kind of a problem.

My 3Gs won't start anymore, how can I get it to?

I plugged in my 3Gs for the night last week and I woke up with the battery at 80%, so I just thought that maybe it came unplugged or something. I plugged in my charger and nothing happened, I got the "Charging is not supported with this accessory" error, even though I was using the white wire that came with it. I took it out of the wall adapter and tried it on my computer, nothing. I try my brothers wire, my mom's wire, car chargers, everything. Now I'm not sure if my battery is just done, or if my phone just won't start anymore, it's out of warranty so I'm up for any type of fixes, thanks.

Clean the iPhone dock port with a clean dry toothbrush. See if it helped. If not, clean dock port very carefully with lint free cloth moistened with Isopropyll Alcohol, especially clean the pins which are on top of the dock mid rib. You can even use the toothbrush with a bit of Isopropyll Alcohol here too. Let it dry, usually 30 seconds time. See if this helped.

Ultra 10 won't start anymore

Hello,
I have an Ultra 10 box with an extra video card inside. Everything was working fine, and then I got curious and decided to open it up to see what's inside. Now it won't start anymore. I turn the computer on, the fans start spinning, but nothing gets displayed on screen. I can hear the hard disk turning too, and the CD drive is powered, but I don't think anything is going on.
The only thing I touched when I opened it was the extra graphics card, but I was very careful and I am pretty sure I did not fry it. I get nothing displayed on screen when I plug the monitor in the original video card either.
Is there anything I can do to find out what the problem is? Is there some special switch inside the box that I may have turned off without noticing?
Thanks for the help...

Hello,
when you removed the ATI Radeon (XVR-100) and powered-on, the long card (Creator3D or Elite3D) with the weird connector (13W3) became the default output device. It takes precedence over the integrated video.
Remove the long card (if you don't own a 13W3-HD15 adapter or monitor with 13W3 connector) and insert the XVR-100 (attach the monitor to the integrated video). If you power-on the integrated video becomes the default. You should see the output on the monitor.
Enter show-displays at the ok-prompt. If only a single entry is displayed, power-down and check if the card is properly seated.
Otherwise press the letter of the entry that doesn't contain /pci@1f,0/pci@1,1/SUNW,m64B@2.
This a sample output of an Ultra 10 with Creator3D as add-in board.
ok show-displays
a) /SUNW,ffb@1e,0
b) /pci@1f,0/pci@1,1/SUNW,m64B@2
q) NO SELECTION
Enter Selection, q to quit: b
/pci@1f,0/pci@1,1/SUNW,m64B@2 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci@1f,0/pci@1,1/SUNW,m64B@2
nvalias mydev ^Y
The above sets the output-device to the integrated video even if a Creator3D is installed.
Then enter setenv output-device mydev (if you used this name) and reset-all. Attach the monitor to the XVR-100.
Michael

CVI program won't start anymore

Our measurement application worked well on several PC's (Win7 32Bit, WinXp 32Bit).
But on 2 newer PC's (Win7 32Bit) the application won't start anymore.
The attached Error with the code R6030 shows up.
We found a workaround for the problem: run the application as administrator.
But after we installed a USB-driver, this workaround doesn't help anymore,
and the Error shows up every time.
We installed the environment (cvi-rt, etc...) with an distributed setup.
So the Versions of the components are the same on every PC.
Any ideas?
Solved!
Go to Solution.
Attachments:
Untitled2.png ‏25 KB

Okay we solved the problem,
the cause was, the HP-Software, which was preinstalled on the PC's (the others were Dells)
After uninstalling the HP Security Suite our application works perfect.
I hope this helps other poor guys

NSM3 service won't start anymore

Hi,
NSM AD 3.0.4 on W2008R2
has been running fine for months, now engine service won't start anymore.
engine.log from todays start:
01 2012-12-13 11:19:19 7200 1 0001 1452 1480 ML: Failed to initialize 1
or more components and/or subsystems. Engine is switching to
stop-pending state.
ideas?
sk

Sami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Premiere Elements 11 won't start anymore ...

Similar Messages

Maybe you are looking for