Premiere Elements 11 wont render work area???

Hi, I'm having an issue with Premiere Elements 11. I'm workng on a video project, and I need to render my timeline for smooth preview playback, but everytime I hit render, it just plays the timeline, without rendering anything. That little box doesn't come up or anything.

For the couple that do have the orange line and rendered, that is normal. And, you are saying there are those with orange line over content, that will not? And, they are all supposed to be the same footage?
No, the ones that have the orange line as normal WILL render as normal.
There are several clips for this video, all recorded with the same settings with the same camera, but only 1 or 2 that will render properly. The others have no orange bar at the top like they should.
There are gray tabs in the WorkArea Bar above the Timeline. They should be spanning the content on the Timeline. Is any of your Timeline content no being spanned by the setting of these gray tabs of the WorkArea Bar?.
I'm afraid you lost me there. I'm not sure what you mean by "spanning'".
As for your workaround, what is your export choice and settings so that you get footage for a subsequent project, footage that performed better than the original?
720P 29.97, H.264, AAC 48kHz in quicktime format.
It renderd pretty much lossless (or if there is loss its so subtle that I can't see it) But apperantly my system can handle it better that way then it can footage right off the iphone.
Have you taken the time to look at the properties that you are putting on the Timeline, such as, video and audio compression, frame size, frame rate, progressive or interlaced, file extension, pixel aspect ratio and such? Your App needs some looking at. Does that iPhone have a variable frame rate? Lots of questions that may or may not have anything to do with this specific rendering issue, but probably do as regards the prognosis for your overall project.
The setting on my app is "1280x720" resolution, and 30 fps. I can adjust fps down all the way to 1fps if I want to (idk why I'd want to do that, lol) but I normaly shoot at 30, and thats what these where shot at.
If you have a screenshot of the Timeline track content that will not render (with the orange line over them), please post in your next post. It would be helpful to review your overall Timeline setup.
http://imageshack.com/a/img545/1383/eb68.jpg
http://imageshack.com/a/img266/6277/94g3.jpg
Hope that helps.
Iphone won't edit easily because it uses a variable frame rate
- A possible fix in message #22
Well, the app is set for 30fps. Besides, that fix wont work cuz I don't have quicktime pro.

Similar Messages

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

Hitting enter key or choosing "render work area" no rendering occurs

I recently migratated all my pictures and projects from one computer to another, new one.
Working with PE12.
I'm trying to render a project that I have created, but when I hit the enter key, or even select "Render Work Area" from the Timeline menu, instead of rendering, it plays back the project.
Anyone knows what is going on?! please?

ATR,
I'm very glad you jumped back in. So, thank you.
I've done everything you have suggested, and I'm getting the same issue. However, there is one observation that could help you further narrow it down.
I'm going to respond to all your suggestions, point-by-point below in order to help you - help me- the best I can
1. I am assuming that you are working in the Expert workspace of Premiere Elements 12. If so, the go to the Quick workspace and try each of the following [ Correct]
a. Hit the Render button above the Filmstrip there [done]
b. Go to Timeline Menu/click on Render Work Area [done]
c. Press Enter key of the computer main keyboard [done]
Did the rendering dialog come up at any time? [YES, (and this has been happening all along), when I try to render, in any of the 3 ways above, I do see a window pop up for a millisecond and then it disappears. I hightly suspect that it is the "render" window that is attempting to open, but just goes away for some reason.
When you went back to the Expert workspace, was there now a green line instead of an orange line over the TImeline content spanned by the gray tabs of the Work Area Bar? [no, still orange coolor]
2. Make a copy of the problem project (File Menu/Save A Copy and renaming it). Open the copy and determine if you can render the Expert workspace Timeline content of that of the Quick workspace Filmstrip.
3. Have you cleared out the preview files in the Adobe Premiere Elements Previews FIle Folder for this problem project? [YES, manually went inside the Adobe Premiere E Previews File and deleted everything] Double check on that. How much free space is there at the location where you have this Adobe Premiere Elements Previews Files Folder? [Plenty of space is left ~ 230GB] Next, go to Edit Menu/Preferences/Media and its Media Cache Datebase and hit the Clean button there to get rid of conformed video files. [Hit the clean button, twice]
4. Next, delete the Premiere Elements 12's settings file named Adobe Premiere Elements Prefs. The route to it in Windows 7, 8, or 8.1 64 bit is
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the path cited. [Wend all the way inside the 12.0 folder, but did not see any file called Adobe Premiere Elements Prefs, so deleted the whole 12.0 folder instead as you suggested]
Just starting my day. We will be watching for further developments. I will be thinking about this some more.
Thanks.
ATR
Add On...Leaving the whys behind can lead to more of the same. So, unless you are in a time crunch to get this project out, let us not give up just yet [ I am not in any rush to get this out, and I not giving up if you aren't . I can tell you like to solve puzzles and I thank you for it.]

Render Work Area/Warp Stabilizer Changes Video Duration

Hi everyone,
I'm quite new to Premiere Pro and I have no doubt this question has a simple answer.
I've put in a small video, say 5 seconds into my timeline. I then for example apply the warp stabiliser effect. I think select Sequence - Render Work Area.
But every time I do it, the full video is no longer showing. It's like it has kept the same amount of frames, but because warp stablizer (I'm assuming) has inserted frames to smooth it out, I'm only seeing a fraction of the total clip length.
So video length is still 5 seconds, but I'm now only seeing say, 60% of what was shown before.
Just for further info, I'm using a 720HD 30fps sequence, but the video in question is a 120fps from a GoPro. I wonder if that's causing the issue?
Any help would be greatly appreciated.

Hi Jonathan,
I hope you get a good answer from the gurus at ADOBE on this one. I use ProDADS Mercalli V2+ Stablizer in Cs5.5.2 with 4 cores Xeon processor, i suggest you trial it as I have had no issues with the exception of cutting the clip after stablization, do it befor hand. I was thinking of upgrading to 6.1 ?
Good luck

Render Work Area only partially completes?

Hello everyone,
I have searched the Forum but not found an answer or discussion on this problem.
My problem is that Render Work Area only partially completes, i.e. if I have several clips in the work area (all showing yellow in the status area) and I apply transitions or effects to several of them, such that the modified segments show red in the status area, I expect to be able to Render Work Area [ENTER] and have it render all the segments that are red. But it doesn't. It renders the first few red segments then stops. I have to manually hit ENTER several times to get it to render all the pieces.
I'm pretty sure this is not how it is supposed to work. In previous versions of Premiere, it would render all red segments in one go.
Does anyone know what I need to do to make it render everything in one pass?
I did find this post on a different forum:
http://www.dvxuser.com/V6/showthread.php?211157-Annoying-Premiere-Pro-CS5-Preview-Render-I ssue
But no solution was ever reported. The person just re-installed on a new machine and the problem did not appear on the new machine. But I don't have another machine to try this on. My machine is a Windows 7 64-bit i7. I am running Premiere Pro CS5 5.0.0. My footage is from a Canon 5D Mark II, 1080p, 29.97fps. The footage natively displays and previews fine.
Thank you very much in advance for any help you can give.
Best wishes,
Lloyd

> I am running Premiere Pro CS5 5.0.0.
You should install the Premiere Pro CS5 (5.0.3) update. The recent updates fix a lot of problems.

Adobe Premiere Elements 13 stops working trying to add media via videos from camera

When I try to add media selecting videos from camera or flip, Adobe Premiere Elements 13 stops working and closes. What might be the problem?

elizabethmeow
On what computer operating system is your Premiere Elements 13 running? Have you had the opportunity to update 13 to 13.1 using an opened projects Help Menu/Update?
What are the full properties of your source media and how are you importing them that you are trying to import into the project? A quick way to get that information, if you do not know that information, is for you to post the brand/model/settings for the camera that recorded the video.
Do you have the latest version of QuickTime installed on your computer with Premiere Element 13, and are you running the program as Administrator?
Lots of additional questions, but the answers to the above may give us the answer that you need to resolve you issue.
Thank you.
ATR

I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.

I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.

goldstein
Please define what you mean by
I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.
Can you not install the program? If you cannot, how are you installing it, from an installation disc or installation files from Adobe? Are you looking at the tryout or a purchased product? At what stage of the installation are you blocked and with what messages? Do you have the anti-virus and firewalls turned off? Do you have another other computer protective software installed such as NetNanny?
If you are getting through the installation OK, are you able to Sign In after the installation and restart of the computer?
If you get into the opened project, when does the problem first manifest itself? Is the problem in a new project or in an existing one?
Is the problem in one of the editing features?
Is the problem in one of the export choices?
Other?
The answers will be in the details which allow us to help you.
Thanks.
ATR

During app load, Premiere elements 11 stopped working all of a sudden. Why?

Premiere elements 11 stopped working all of a sudden. Says "A problem caused the program to stop working correctly" I re-installed it but still the same.
I haven't installed any other apps except adobe reader and there were a few Windows updates but that was it. Some history - I had defraged my hard drive when this started to happen. Wouldn't the re-install have fixed it if the de-frag caused this problem? What is causing elements to stop loading at the splash screen?

DFMA
Thanks for the follow up with the very helpful information.
If this is one of those Importer QuickTime type issues, the answers are few if any.
If you have not already tried
Have you attempted to delete the Adobe Premiere Elements Prefs file and, if necessary,
the whole 11.0 Folder in which it exists.
then, please try the following...
My expectations for the following are not high, but worth the time -
1 uninstall the usual Control Panel way - you might want to uninstall QuickTime at the same time.
2. free ccleaner run through (regular and registry parts)
CCleaner - Download
3. reinstall QuickTime and then Premiere Elements with anti-virus and firewall(s) disabled.
Others on the list...
1. Create a new User Account with Administrative Privileges and install and run Premiere Elements
from there.
2. Use a new set of installation files either from Adobe if you purchased the program from it as an online
download, or get tryout installation files for 11 into which you can insert your purchased serial number.
Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
If the latter, read and carry out carefully the Note: Very Important Instructions in order to avoid an Access
Denied message.
We will be watching for your progress.
Thanks.
ATR

Why does Adobe Premiere Elements 12 render only audio?

I have a brand new laptop with all required specs to run Adobe Premiere. I only have the trial version of PRE12 at the moment. The program itself actually runs great, but I can't seem to get it to render correctly. I film on a GoPro Hero 3 White Edition camera and have been unable to get it to render any video filmed on it. I am rendering MPEGS at 1920X1080i 30fps ( which is the exact video the gorpo is said to record). This may even be a problem with wiindows media player, which II am attempting to view rendered videos on. I don't know what else to try!

ilikepike7
Premiere Elements 12 on what computer operating system?
There are two types of rendering in Premiere Elements - Timeline render which is a preview thing to get the best possible preview of the Timeline content as viewed in the Edit area monitor AND render in the export sense of the word.
I am assuming that you are asking about render in the export sense of the word.
1. Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 12? If not, please do so.
Also go to Publish+Share/Computer/QuickTime and see if you have presets there for QuickTime.
2. Are you running Premiere Elements 12 from a User Account with Administrative Privileges and also with Run As Administrator applied via the desktop icon for the program.
Lots and lots more questions I could ask, but for now please see if we can find the solution in the above.
Thanks.
ATR

Render work area

Have we lost 'render work area' in Premiere CC?

You can also achieve the same thing using sequence In/Out points, which I find even easier than the WAB.

I can't see the "Render work area"

Gentlemen !
I work with
Adobe CS4 AE fully updated
Ram 6GB
Footage 1920x1080 24fps
Windows 7 Ultimate
Well, if I am not mistaking , there was something called " Render work area" as well as " Render effect area"
Evertime I wanna sync a part of a song with the lip syncing , the audio is off a bit, but I remember there was a way to render just a part of the video before rendering the entire clip or there was a short cut such as space bar or enter, but seems like that don't work either , any help will be appreciated greatly thanks.

Hehehe,
It is a piece of software that you buy. The site has several plug ins that we find usefull, and with all the different types of Lip-synching out there (using phenomes with static mouths etc) this one just looks the most natural to me. It is also highly customizable and nice to work with.
Since it is midnight there, in a few hours time, the rest of the regulars will be up and about - I am sure they can shed some more light on the "Render work area" question you still have.
Good luck.
here is a link to a really good tutorial on using built in After Effects tools (no extra cost) I find this is perfect for cartoon type animation lip-synching. The reason Auto-lip synch is better for us, is that we want our characters to look more real and alive.
http://library.creativecow.net/articles/rabinowitz_aharon/lip_synch.php
Pierre

Photoshop/Premiere Elements 13...are either capable of making time lapse movies from still images?

Photoshop/Premiere Elements 13...are either capable of making time lapse movies from still images? I heard this feature was removed from Premiere 13, after I purchased it =(

jorgeavanza
It am not understanding clearly what program is not closing
Photoshop Elements
or
Premiere Elements
There is the AdobePremiereElements.exe for Premiere Elements (video editing) and the PhotoshopElementsEditor.exe for Photoshop Elements (photo editing).
Right now you keep mentioning Premiere Elements, but I am seeing your description more like Photoshop Elements.
Please clarify so that we can focus on the correct program and try to resolve its problems.
Thank you.
ATR

Adobe Premiere Elements 10 not working on both my Computer

I just bought Adobe Premiere Elements 10 to use with my Sony Handycam HDR-XR160 but it just dont work
I first try to install on my PC: Intel Quad Q6600 with 8 Gig of Ram and a 500 Go WD Black Edition and a GeForce 9800 GT with 1 Gig of Video Memory .... really jerky video editing interface and the play back is really bad a lot of pixellization all over and also really realy jerky
then I tried with My Mac Pro 2008 2XQuad Core Xeon 10 Gig of Ram 2 x 1TB WD Black Edition (Scratch Folder on second HD) and a ATI Radeon HD 3870 same problem but now the video play back just stop every 5 seconde it s also hard just to drag the video in the time line at the botom of the screen
This is computer I use for My Recording Studio and it's working like a DREAM. I did the same manipulation with other program like IMovie and so on with NO PROBLEM AT ALL .... and the interface was responsive unlike Premiere
I bought your programe thinking I was going for a upgrade from what I was using before and now I can't take it back cause the box is open so please tell me you have a fix or someting cause at the moment ... i'm really not to impress
Thanks for the help

Hello Steve
Thanks for a your help
I still have the same problem I did change the recording from 60p to 60i but the video are still jerky , I know i'm probably the one who's got the problems but I just don't see it !!!
This is the setting I have on my Camera:       Image Quality/Size
                                                                  Image Quality = HD
                                                                  Frame Rate = 60i
                                                                  Recording mode = High Quality FH
                                                                  x.v.Color = On
                                                                 Connection
                                                                 TV Type = 16:9
                                                                 Component = 1080p/480i
                                                                 HDMI Resolution = Auto
                                                                 CTRL FOR HDMI = On
From thoes Info can you tell me what's the Best Preset in Premiere or if someone is using premiere with a Sony Handycam HDR-XR160 can you tell me your exact settings for both the Cam and Premiere
Thanks

Adobe Premiere Elements 9 Stopped Working

When I launch Adobe Premiere Elements 9 the only menu options that are available are to create a new Project or open a previous one, all other menu options are greyed out. Creating a new project has no effect. If I attempt to open a previous project I get a message saying a serious error has occurred and Premiere must close. This product had been working fine for the past two years.

Hi There,
I'm having a similar issue, having not used Premiere Elements 9 for a few months, which I'm only discovering now.
My issue seems to be only with the "Instant Movie" option.
When i select "Create/Instant Movie" The PE window opens and loads to a grey screen only.
I installed the 9.01 Update - Same.
I deleted the Prefs file - Same.
I deleted the whole 9.0 folder - Same
So i decided to do a full uninstall/reinstall and the same issue occurred. Again i tried the update, deleting the prefs file and the 9.0 file and I'm still in the same situation.
BTW i have also tried setting compatibility mode to (XP Service pack 2 and 3, Vista SP 1 and 2 and Win7)
Do you have any ideas on what might be causing this?
I'm running Windows 7 and currently running the Premiere Elements 9.01 update.
Any help appreciated.
Thanks.

Green pixels in clips cause 'premiere elements.exe stopped working error.'

I have a jvc everio camcorder - PAL. I have copied files from the camcorder to my computer. My computer is running Vista SP1 with 2Gb ram.
The files appear to import to PElements 4 however when playing or rendering the clips I get an error adobe premiere elements.exe has stopped working.
I have noticed that the clips have green pixels appear at the point where PE crashes. All clips seem to have this problem.
I have followed the suggestions from the knowledge base re: updating codecs, disabling startup items, updating video driver.
I don't have the cyberlink software that came with the jvc. I bought premiere elements as I had read that it would be able to read the jvc files.
Has anyone got any other suggestions?

Thanks for the redirect. The solution to my problem was to follow this suggestion from that thread:
I was having the same JVC Everio/Elements 7 problem. I tried renaming the .mod extensions to .mpg and .avi, but still had the green artifacts. After an hour on the phone with Ronald, a VERY helpful Adobe Service Tech, I seem to have a solution that is working on my 5 edit stations here in my AV Lab.
Go to the Adobe Elements 7 folder in your "Program Files" folder and open the "Plug Ins" and "en_US" folders. Find a file called ImporterFastMPEG.prm and remove it. I moved it to the desktop until I test the software totally and make sure this doesn't cause other problems. If you are a brave, go ahead and delete it.
This is working for me, and avoids all that renaming - reprocessing the .mod files. So far, so good!

Premiere Elements 11 wont render work area???

Similar Messages

Maybe you are looking for