Premiere Elements 12, Ausgabedatei auf der Bluray viel zu klein
Hallo,
nachdem ich das Problem mit dem Brennen auf Bluray gelöst hatte, bemerkte ich, dass die Ausgabedatei auf der Bluray entschieden zu klein ist.
Meine Daten belaufen sich auf 12 GB. Nach Fertigstellung auf die Bluray sind es nur noch 5,7 GB und das Ergebnis ist auf der Bluray erschreckend. Das kann man sich absolut nicht anschauen.
Sofern ich die Ausgabe mit der gleichen Auflösung in ein Datei Format ändere (m2t) ist alles super. Brenne ich diese Datei dann mit einen anderen Brennerprogramm zur Bluray ist auch alles optimal. Die Dateigröße bleibt erhalten. Über Premiere Elements wird diese Datei entschieden kleiner auf die Bluray geschrieben, obwohl genügend Platz ist. Ich habe schon den
Punkt "Speicherplatz an das Medium anpassen" angeklickt. Bringt auch nichts. Wo kann ich denn die Komprimierungseinstellung ändern?
Habe nichts gefunden.
So, wie es jetzt ist, kann man es vergessen.
Gibt es eine Möglichkeit den Encoder manuell einzustellen, damit die Ausgabedatei für Bluray nicht groß geändert wird?
Habe es jetzt noch einmal versucht. Die Datenmenge liegt bei 15 GB. Wenn ich die Ausgabe in ein Dateiformat erstelle, ist diese Datei (m2t) ca 16 GB groß. Als gerenderte Bluray nur 6 GB.
Die Qualität ist Müll.
Woran liegt denn das nur?
Similar Messages
-
Premiere elements 8 projekte auf Mac öffnen
Hallo,
ich versuche verzeifelt einen Weg zu finden, wie ich meine alten, auf dem PC mit Premiere Elments 8 erstellten Projete auf meinem neuen Mac bearbeiten kann. Weder das aktuelle PE noch eine alte PE Version 9 für Mac können die alten Projekte öffnen. Hat jemand eine IDee?
Danke!Nee, das wird wohl gar nicht gehen, weil in älteren Versionen die Projekte sowieso plattformspezifisch sind. Das hat sich erst mit Version 9 oder 10 geändert. Du wirst gar nicht drumrum kommen, dir zumindest mit Bootcamp oder irgendeiner Virtualisierungslösung ein Windows auf dem Rechner einzurichten, wenn dir das so wichtig ist.
Mylenium -
Der organizer in premiere elements 11 funktioniert nicht
Trotz kompletter Neuinstallation
zeigt der Organizer viele Datein mit ? an
bevor fehlende Datein gesucht werden können
stürzt das Programm abmit freundlichen Grüßen
Reinhard Uhl
Druckagentur Printpool
Im Brühl 22
71404 Korb
Tel. 07151 1679125
Fax 07151 1679480
mobil 0163 5536333
[email protected]
Von: A.T. Romano
Gesendet: Samstag, 30. August 2014 00:27
An: Reinhard Uhl
Betreff: Der organizer in premiere elements 11 funktioniert nicht
Der organizer in premiere elements 11 funktioniert nicht
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/6685676#6685676> -
Premiere Elements 11 .iso Image für Blu Ray erstellen
Hallo,
Kann man mit Premiere Elements 11 ein iso Image für blu rays erstellen?
Habe es mit dieser anleitung versucht, aber mir wirt der isoauswahlbereich nicht angezeigt (nur Ordner oder Disk)
Adobe Premiere Elements – Hilfe | Freigeben auf DVD oder Blu-ray-Disc
Kann mir jemand sagen ob das mit Premiere Elements 11 funktioniert oder ob das erst ab Version 12 /13 funktioniert?
Danke
And now i trie it in english
Hello,
Is it possible with Premiere Elements 11 Create an iso image for blu rays?
Tried it with this manual, but my host does not appear isoauswahlbereich (only folder or disk)
Adobe Premiere Elements – Hilfe | Freigeben auf DVD oder Blu-ray-Disc
Can anyone tell me if this works with Premiere Elements 11 or whether the only works from version 12/13 me?
Thank YouJGeneratorH
Thanks for the follow up and glad to learn that the Phantom Burner worked for you.
Thanks also for the information on the link to Phantom Burner in the blog post. I will update that link in a few moments.
Please let us know if any questions or need clarification on your Premiere Elements workflows. Glad for the opportunity to be of
assistance.
Best wishes
ATR
Add On...Just updated the Phantom Burner 2.0 link in the blog post and added this footnote.
**UPDATE January 8, 2015. The original link to the Phantom Burner 2.0 used when this blog was written is no longer working to obtain the Phantom Burner 2.0 and has been replaced this day with a link that is working to obtain the Phantom Burner 2.0 tryout download (phantomburner_setup.exe). This new link seems to be working to obtain the "Phantom Burner 2.0", but the Learn More and Purchase buttons for this choice do not work. Interestingly, the old and new links are from the same web site, just different pages of the web site. At this time, it is not known if this reflects problem with the PHANTOMbility.com web site or something else. -
Qualitätsprobleme beim Erstellen einer Disc mit Premiere Elements 12
Hallo zusammen,
ich versuche mit Premiere Elements 12 Filme auf DVD zu brennen. Soweit funktioniert das auch, nur die Bildqualität geht gar nicht!
Ausgangsmaterial ist ein MOV Video mit der Größe von 1,8 GB. Also kein Problem für eine DVD.
Nach dem Brennen befinden sich auf dem DVD Film nur Querstreifen über dem Bild und geben dem ganzen Treppen statt rundungen. Eine Bildqualität, die sich nicht auf dem TV gucken lässt ohne das Heulen zu kriegen.
Leider habe ich die selbe Bildqualität auch beim Film brennen mit Toast. Von daher dachte ich, ok, mit Premiere geht es besser.
Hat jemand eine Idee?Hallo,
die *.TS Dateien liegen als MPEG-2 vor. Das Seitenverhältnis ist immer 16:9. Ich arbeite mit verschiedenen Aufnahmen. Es gibtg HD mit 1080p, HD mit 1280x720 und SD mit 720x576.
Die TS Dateien mit 720x576 wurden mir zuvor auf meinem Windows PC auch so angezeigt und so verarbeitet in bester DVD Qualität. Seit einer Woche habe ich keinen Windows PC mehr
und bin komplett umgestiegen auf einen Apple IMAC 2,9 GHz Intel I5, 21,5 Zoll, 8GB RAM, OS-X 10.9.men
Hier werden mir die SD Aufnahmen nicht mit 720x576 angezeigt, sondern mit 1024x576 ??? Ich muss diese erst mit ISkysoft Video Converter umwandeln. Damit es danach als Vollbild läuft, muss
ich als Auflösung 720x408 wählen, sonst läuft es in einem Fenster mit dicken schwarzen Rahmen. Auch Premiere Elements 12 produziert die schwarzen Rahmen, wandele ich es nicht vorher um.
Ich lade gerade ein paar kleine Testdateien von ca. 2 Minuten Länge in mein Mediencenter. Das Beste ist, Du schaust Dir die Dateien selber einmal an. Ich werde hier gleich noch
den Link veröffentlichen, um die Dateien aus dem Mediencenter zu laden.
Es sind folgende Dateien:
Original1280x720HD.ts = Original HD Datei aus der Dreambox
Test720x408.mov = Convertierte HD TS Datei zu SD. (Mit ISkysoft Video Converter)
mov2dvd_Premiere12.vob = Konvertierte MOV Datei mitPremiere Elements 12 zu DVD umgewandelt. Hier sind die Treppen und Querstreifen Horizontal gut zu sehen.
Original2dvd_Premiere12.vob = Original HD TS mit Premiere Elements 12 zu DVD umgewandelt. Qualität fast OK, bei schnellen Bewegungen Treppen und Querstreifen Horizontal.
mov2dvd_Xilisoftdvdcreator.vob = MOV Datei mit dem Xilisoft DVD Creator zu DVD umgewandelt. Qualität OK keine Treppen, keine Streifen horizontal Auf dem TV super! Leider nicht genug
Schnittmöglichkeit wie unter Premiere Elements 12.
Wenn gewünscht, kann ich auch noch eine Dreambox SD Originaldatei hochladen mit eigentlich 720x576, die hier mit 1024x576 angezeigt wird.
Die SD Dateien sind nach Umwandlung mit Premiere zu DVD qualitativ noch schlechter als die HD Aufnahmen, obwohl nach Umwandlung beides gleich sein müsste.
An meinem alten Windows PC habe ich die Dateien mit Nero Video geschnitten und zu DVD gebrannt. Funktionierte immer ohne Probleme und gute Qualität.
Ich werde gleich noch den Link zu meinem Mediacenter posten und hoffe auf weitere Hilfe.
Vielen Dank. -
Premiere elements 13 kann keine avi datei laden
Premiere Elements 13 (testphase) kann keine avi Datei laden. Ergebnis unter Windows 7 32bit ist ein unkommentierter Absturz von Premiere Elements 13. Bei der AVI Datei handelt es sich um eine aus einem Super8 Film konvertierte Datei, Der AVI Film lässt sich problemlos mit dem MediaPlayer abspielen und GSpot findet den Codec H.264/MPEG-4 AVC und sagt der Codec ist installiert.
KISCH
H.264 or AVCHD (MPEG4 AVC/H.264).avi is not supported by Premiere Elements 13 or earlier. You will need to convert this file to a format that
Premiere Elements supports. Consider H.264.mp4 or AVCHD.mp4.
Depending on the video compression, Premiere Elements 13 does support files wrapped with the .avi file extension. And, the AVCHD video compression is a supported video compression. But the combination of H.264 or AVCHD with .avi (wrapper format) is not.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
Premiere Elements 9 - MTS-Video keine Tonspur
Hallo,
ich habe bisher mit Premiere Elements 8 gearbeitet und konnte die HDV Videos meiner Panasonic Lumix TZ10 (MTS) ohne Probleme im Editor einfügen und bearbeiten.
Mit dem neuen Premiere Elements 9 habe ich beim einfügen der MTS-Datei keine Tonspur, auch die direkte Vorschau ist stumm (Video wird gezeigt).
Ich habe versuchsweise mal einen VOB-File von einer selbst erstellten DVD in der 8er und dann zum Vergleich in der neuen 9er Version eingefügt. Hier ist genaus der selbe Fehler: In Premiere Elements 9 hat auch der VOB-File keine Tonspur.
Handelt es sich hier um einen Fehler oder gibt es in der neuen Version irgendeinen Schalter?
Mein System:
Windows 7 Professional 64bit
6 GB Ram
Intel I7 920 (2,79 GHz)
HDGaspenI can't answer yes or not confidently, so I'll walk through what I'm seeing.
Project Settings > General, indicate Video Frame Size 1920x1080, square pixels 1.0.
When I edit in the timeline and drag and drop new clips, I have them all set to default scale to frame size. Additionally, anything I create in photoshop I save on a 640x360 canvass so I'm using the same baseline size for everything, that way I know where it will all end up when I bring it into elements.
When I share, I'm then choosing the following settings:
Windows Media > Email and Playback on a PC
Presets: custom
Video frame: 640x360
Rate 29.97fps
Pixel aspect ratio NTSC Widescreen 16:9 (1.2121).
The rest shouldn't affect it. Now that I'm typing that out I see a discrepency. The source pixel ratio is square, while the output I'm trying to make is widescreen. That may have some negative effects. I'm going to change the output to a square pixel and re-produce (which will take upwards of an hour) and try that.
Aside from the pixels, does my info above answer your other questions? Do you see any other issues with what I'm doing? -
Es sieht aus als wäre das Programm im Bearbeitungsmodus und ich kann nichts mehr ändern geschweige denn eine Vorschau starten.
Wie kann ich den Modus wechseln oder die Edition schließen ?oa16v
What video card/graphics card does your computer use? NVIDIA GeForce? If so, please read the Announcement at the
top of this forum on the Premiere Elements 10/NVIDIA GeForce issue whose only real remedy is to roll back the driver
version to about May 2013. All the details are in the Announcement which I have copied/pasted below.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you
are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of
troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained
workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video
card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as
far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013
in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this
regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the
driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please review, consider, and then let us know the outcome. With Windows 8.1 64 bit, I do not know if there is
a driver version old enough for you to use to get Premiere Elements 10 to work. If your computer does not use a NVIDIA
GeForce card, that would take that factor away.
Thank you.
ATR -
PSE-Diashow auf DVD nur mit Adobe Premiere Elements?
Ich habe mit PSE 4.0 eine Diashow größeren Umfangs erstellt, die ich auf DVD brennen will um sie mit dem DVD-Player am Fernseher abzuspielen. Wenn ich aber in der Diashow-Ausgabe auf den Button "auf Datenträger brennen" drücke, erkennt das Programm die eingelegte DVD nicht und es kommt die Meldung ("inkompatible Medien. Legen Sie eine leere CD-R oder CD-RW ein, um die VCD zu brennen). Warum funktioniert das Brennen auf DVD nicht? Jemand hat mir gesagt, dazu wäre das Programm "Adobe Premiere Elements" erforderlich. Kann das sein, dass ich nur, um die Diashow am Fernseher ansehen zu können, diese Programm erwerben muss? Wie ist es bei der neuen Version PSE 5.0?
Du legst einfach ein neues Projekt an dann wirste schon gefragt, wo das gespeichert werden soll. Irgendwie verstehst du da grundsätzlich was falsch.
Mylenium -
Die Adobe-Homepage ist ein Labyrinth! Dieses Labyrinth hat mich viel zu viel Zeit gekostet! Bis jetzt finde ich keinen direkten Herunterladen-Verweis des aktuellen Adobe Flash Players für Opera und des Premiere Elements 9.0.1 Updaters!
Also von adobe.de über die Suche nach "Flashplayer" kommt man hierhin: http://www.adobe.com/de/products/flashplayer.html?promoid=JNVYU
Dort ist ein dicker Button "Download Flashplayer", der bringt einen hierhin: Adobe - Andere Version des Adobe Flash Player installieren
Dort steht was von Chrome, Sie haben Opera (echt, dieses Fossil?), also den Link geklickt und man landet hier: http://get.adobe.com/de/flashplayer/otherversions/
Dort kann man u. A. auch Opera auswählen. -
(Premiere Elements 3.0) Exportieren auf DVD
Hallo an dieses Forum!
Kann mir jemand helfen beim Exportieren auf DVD! Es tritt die Fehlermeldung auf "Datenrate zu hoch für DVD". PGC-Info: Name=, Ref=,Apge, !!!
Alle Versuche auf 8 Bit konstant zu Exportieren schlagen fehl!
Danke! SunnyEverios really are a problem for Premiere Elements for some reason. Here's a workaround one person came up with.
http://www.adobeforums.com/webx/.3bc1265c
The real question though is how did you get your video from the camcorder into your computer? Did you download the files? Use another program to capture them.
Far and away, the best way to guarantee the highest quality is to convert those Everio files to DV-AVIs using a program like MPEG Streamclip BEFORE you bring them into PRemiere Elements. The FAQs at the top of this forum tell you how.
http://www.adobeforums.com/webx/.3bc4800e -
Ich habe Premiere Elements 13 gekauft, kann es aber nicht auf meinen iMac herunterladen. Wenn ich in meinen Bestellungen auf die Bestellnummer klicke, werden nur 2 Versionen für Windows zum Download angeboten???
if you have a mac serial number:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
Hallo,
ich benutzte seit heute Adobe Premiere Elements, habe einen ersten Film gemacht und kann diesen nicht rendern, aufgrund folgender Fehlermeldung:
"Der folgende Effekt konnte nicht gerendert werden: Wellen (kreisförmig)"
1. Woran liegt, das und wie kann ich den Fehler beheben.
2. Ich würde den Effekt auch ggf. entfernen, nur finde ich diesen in meinem Projekt nicht mehr.
Ich bedanke mich sehr für die Hilfe
AndreasWoran liegt der Fehler?
Öhm...
Das Betriebssystem ist Windows XP, SP3
Ja, Scherz beiseite, aber sicher hat das schon was damit zu tun - Grafikakrtentreiber, Audiotreiber oder irgend so was. Mal die exacten Systemdetails und Crash-Info rauskramen:
Working with your Operating System’s Tools
Mylenium -
Premiere Elements 8 stürzt beim Aufrufen der Überblendungen ab
Hi, ich bin neu hier im Forum, deshalb weiß ich nicht, ob ich alles richtigmache... :-)
Ich habe ein super ärgerliches problem mit Premiere Elements 8: Auch nach dem Update 8.01 stürzt Pre jedes Mal ab, wenn ich eine Überblendung hinzufügen will. Pre stürzt ab, sobald ich auf Überblendungen klicke. Ich kann noch einen kurzen Blick auf die verschiedenen Überblendungen werfen, dann ist Pre plötzlich zu und das Fenster mit dem Absturzbericht taucht auf...
Absturzbericht hab ich natürlich auch schon etliche male gesendet.
Ich habe Windows 7 Professional 64bit, Intel Core i7 920 @ 2.67 Ghz, 6Gb Arbeitsspeicher und eine Ati Radeon HD 4850 mit dem neusten Treiber (10.3).
Neuinstallation habe ich auch schon versucht...ohne Erfolg. Hintergrund-Rendern und automatische Analyse sind natürlich auch aus.
Bin echt am verzweifeln. Es kann doch nicht sein, dass man mit einem Programm, für das man Geld gezahl hat, nicht mal Überblendungen benutzen kann!!!
mfg Pillus 666Hallo,
im Absturzbericht können die Absturzdaten angeklickt werden (unten links). Was steht dort als Crash-Ursache?
MfG
Coböken -
computer: Lenovo ideapad Z710
OS: Windows 8.1
program: Premiere Elements 12.1Dear Mylenium,
my problem is:
Adobe programs do not recognize an established and working internect connection.
So I used the same computer to get with the given request code ("Anforderungscode") an answer code ("Antwortcode"). But Premiere Elements does not recognize this answer code and tells me, that this answer code is invalid ("ungültig"). So what should I do ?
Everytime I try to repeat this, I get the same request code and the same answer code. Should I wait until the 72h time limit is over to get than a new answer code ?
Anyway, why does Premiere Elements (like Photoshop Elements, too) does not recognize the established internet connection, but is able to recognize that there is for instance an update available ?
Thanks for help.
HTJ3BA
Maybe you are looking for
-
Hi, I'm a film student and a little while ago I just bought a MyBook 1T external hard drive (USB only). I'm looking into reformatting my hard drive because when capturing with fcp (straight to the hard drive) I keep getting an error at around 9 minut
-
Does OSB support XQuery import module feature ?
In OSB version 11.1 and Oracle Weblogic Server Version: 10.3.6.0 I need to create library of XQuery functions (reusable components), to achieve this, I need to use XQuery import module feature. When I tried to use it, I got this error message 'Module
-
Whicj log file locates the problem?
Everywhere on the Internet it states to check your log file to see what causes any problems (kernel errors, apps unexpectedly quiting, etc.) with the OS. The problem is there are so many log files; which do I need to review to find the problem?
-
I am upgrading Windows Vista to a 64 bit Windows 7 or 8. I have premiere pro CS3. Will that work smoothly with the upgraded version?
-
Greetings all, I just got my SATA card and HD installed and now I have a question. I've been scrouning around in about this mac but can't find the drive info. Anybody have any ideas? It's there and it works but no info. For all I know this is typical